San Francisco 49ers Logo
San Francisco 49ers 1st Layer Black 2nd Red 3rd Gold 4th White 5th Black
- Pobrania
- 1965
- Polubienia
- 119
- Ocena
- 5
208 modeli
San Francisco 49ers 1st Layer Black 2nd Red 3rd Gold 4th White 5th Black
A Logo Stand from Sanfrancisco 49ers
The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
🇺🇸 Welcome to San Francisco! This model was created by MiniWorld3D member Trevor DePodesta (@coold3d4me ) www.cool3d4me.com The Transamerica Pyramid in San Francisco, California, is a 48-story futurist building and the second-tallest…
There are lots of different statues of St. Francis of Assisi, but this is one of my favorites because of the bird in his hand and the bird on his shoulder. :) See also Version 2 . I created this model by scanning a cement statue from my…
Cisco Webex Room devices are provided with wall and VESA mount options. Room Kit Plus / QuadCam is wall mount only. No legs for desk or top of display placement are available. I tried to fill the gap and created the legs for both types of…
The official Cisco part for wall-mounting 8800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
Here is the awesome looking San Francisco 49ers Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or…
Spend $20 for rack-mount ears for my Cisco 10-port switch!? Forget that! These printed ears are MORE than strong enough at 30 percent infill, even with some other stuff stacked on the switch in the rack. My SG300-10P used 12mm long M4…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
San Francisco 49ers Coaster
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
At my partner's suggestion, I made up this little cookie cutter in honor of the San Francisco 49ers. We'll have to see how it works! Print instructions Category: Kitchen & Dining Summary At my partner's suggestion, I made up this little…
Wings to be able to mount a Cisco C1000 into a standard 19" rack. I would recommend printing in PC or another tougher material since the wings have to deal with a decent load. I printed these with 5 perimeters with 20% adaptive cubic…
Show the world you're faithful to the Bay with this San Francisco 49ers Oversized Pendant / Fan Chain ! Modeled for high-impact visibility and printed with team spirit in mind, this piece is ideal for fans who go big on game day. Whether…
Lantern Corps Logos for Cisco Gold Ring Take the main ring from Cisco :) https://www.printables.com/model/132729-gold-ring-for-1000-stones The photo is from his make :) Rescaling chart of his ring and also the plate: size 3- 87 % size 3,5…
Showcase the beauty of San Francisco with this circular topographic map featuring its skyline, hills, and bay shoreline . This model captures the city’s urban layout, distinctive topography, and waterfront in detailed relief — perfect for…
Simple bracket for mounting Cisco Catalyst-series small-formfactor switches on walls, on/under tables etc. Tested with Cisco Catalyst 3560CX, Cisco Catalyst 9200CX and Meraki MS125, but should fit Cisco Catalyst 2960C, CG, CX Cisco…
New additional Kansas City Chiefs Champions coaster Beer mats/Coasters for the 58th Super Bowl with the San Francisco 49ers playing the Kansas City Chiefs. Each coaster has the badge of each of the teams with the Super Bowl LVIII logo…
10" rack mount for Cisco Catalyst desktop switches. The mounts as asymmetric to allow access to the USB port. But blocks access to the last SFP port. Models supported: 2960-C 2960-CX 3560C 3560CX
There are lots of different statues of St. Francis of Assisi, this one is my 2nd favorite. :) See also: Version 1 . I created this model by scanning a cement statue from my mom's yard. She's had it for decades, so I have no idea where it…
After searching Printables and other sites I wasn't finding a single switch (1U) wall mount solution that was quite what I wanted. I wanted something that held the switch snug to the wall and provided sort of anti-tamper factor 🔒 (even if…
Had the problem that it isn't easy to find a good place for a label on the front of a 48-port C9300 switches with 8-port uplink module, if you don't want to cover LEDs etc. This is a draft for a label plate held by the rarely used USB…
This is a rack ear meant for a Cisco SG300 series switch, specifically the SG350XG. The bolt pattern is 20-28mm squared (20,24,28 steps) so it's a bit more universal. I'll be posting a very similar one as a universal rack ear that's not…
Printed without brim but you can add brim if you have problems with bed adhesion Printed fine with generic PLA and PLA+ Optional - add four 10 x 1 MM round magnets to the back to mimic the OEM bezel
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I wanted to mount a Cisco SG 100-16 on the wall so I after measuring the dimensions, designed the right hand bracket and mirrored it in Prusa Slicer on the x-axis. The hole tolerances are tight but worked and the model is not symmetrical…
Flash and Reverse Flash Ring for Cisco Gold Ring A remix of Gold Ring for 1000 Stones by Cisco check out his oryginal project :) I used some of his settings on my 3mf … they are really great . Rescaling chart of his ring and also the…
PLEASE NOTE: No matter your filament, plastic will not be strong enough to support the full weight of the switch in a rack. You should support your switch with a shelf, and use these to keep it from sliding forward/backward in its space.…
You need only things that are provided with the Accesspoint from Cisco. You can screw the 4 little screws in the plate and it should hold. Print lying flat on the back and in the middle part at least 50% Infill and 3 Walls, otherwise…
In order to mount this panel to a wall, i made these, the shortest on the top and the longest on the bottom to get an angle for better view. Can use two long if you want it flat and still room for cable behind. I got the idea from…
This is a “folk art” version of St. Francis (San Francisco) from Mexico (the statue, not the Saint ;). It was scanned with Trnio for iOS, tweaked in Blender and sliced in PrusaSlicer. No rafts or supports needed! See also: Version 1…
Model replica of SFO Airport map. Print Instructions 0.2-0.28mm layer height no supports color change optional
I was unhappy with the way my Cisco 8861 sat on my desk. It was angled in a way that reflected my ceiling lights. Using the clip geometry from r9l, I cut off the rest and remodeled a stand that will hold the phone vertically on the desk…
San Francisco 49ers spinner I used ABS but can be print with other materials I used 30 infill no sports need it hand paint it
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/bES2TiaHXFa Category: 3D Printing
www.patreon.com/bkprint3d
Tried Sacy's model for a Cisco UCS C220 M3 drive caddy but found two parts were not letting the drive fully slide in. Modified the design to remove the small bits in the back left and right that were in the way. Updated model now seats…
San Francisco Golden Gate Bridge Wall Decor
Je l'ai personnellement imprimé sur une Bambulab X1c avec le profil 0.28mm (buse 0.4) Extra Draft en vitesse sport sans surpports en PLA.
San Francisco 49ers Oversized Necklace Logo that I designed. I hope you enjoy!
The Logo is only 0,2mm thick so print this with a resolution of 0,1mm so you get 2 Layers. The last STL file is then a "Normal" Print with a Layer hight of 0,2mm and an Infill of 20%. The circle around the Print is just for Alignement…
The San Francisco 49ers logo (SF) for dual color printing; also, you can join or merge two bodies to make one color printing. If you used PLA to print this pendant, then use a nail polish with glitter to show off your bling-bling.
Francisco Franco -Rolls-Royce
Rack ears for the Cisco 1921 router. Printed this in PLA and there is no way it can support it "hanging" in mid air so additionally added 1U support feet too
San Francisco Giants Oversized Necklace Logo that I designed. I hope you enjoy!
This free MIT license Github repository allows you to convert Open Street Map data to an STL file ready to print! These stls are for Atlanta, San Francisco, and Manhattan. The initial stls were made incorrectly: buildings adding from…
A rack-mountable option and a wall-mountable option for the Cisco Codec EQ. These mounts are designed to securely mount a Cisco Codec EQ while providing a practical alternative to the original mounting options, which retail for $150–$250.…
This is a scale model of downtown San Francisco, California, USA, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when…
This is a displayable football with the San Francisco 49ers logo and text on it. Category: Signs & Logos
Every time I have to remove a Cisco IP phone off the it's wall bracket I never seem to have the right sized tool to release the tabs on the right and left. This simple tool will do that for you! Print two so you can release both tabs at…
Remixed from @hurzhurz_201403's awesome implementation of a Catalyst 9300 Label Plate. Size: 60mm x 8mm
Captain Planet and the Planeteers Logos for Cisco Gold Ring (fire and earth only for resin printer) Take the main ring from Cisco :) The photo is from his make :) Rescaling chart of his ring and also the plate: size 3- 87 % size 3,5 - 90%…
Needs two M3x15mm screws. Print with flat face on bed.
Assembly: Attach the 4 half columns to the bridge/string pieces Attach road to one of the sides Attach road to the other side bringing both halves together Add photo
Wall Plate Skyline - San Francisco Category: Art
Made bracket for Cisco Catalyst C9200CX to be able to mount it to 19" rack without buying original one. Print with PETG at least, print oriented as-is. I used 5 perimiters, Honeycomb infill 20%, snug supports.
This building could collapse if Millennium Tower does.
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/
PLEASE NOTE: No matter your filament, plastic will not be strong enough to support the full weight of the router in a rack. You should support your router with a shelf, and use these to keep it from sliding forward/backward in its space.…
The rim on the pins kept breaking off, because my kids really enjoyed rough playing with this toy. I didn't want to throw out the already printed ones, so I printed an additional assymetric washer to fix it. I used E6000 glue, but you can…
Inspired by https://www.printables.com/model/695811-meraki-mr44-mr46-ceiling-mount-bracket-adapter-thi , I designed this mount to attach a Cisco Meraki MR33 access point to a suspended ceiling. No screws required, the two parts are held…
Here is a great gift or personal treat: San Francisco 49ers Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print…
The Cisco CBW145AC access point is fed from an ethernet port on the back. This is easy enough if the ethernet cable passes out of the wall. Where this isn't possible, this bracket allows the AP to be mounted to the wall and for the cable…
Simple bracket to mount a Cisco 1841 router in a 19" rack. Use short self-tapping screws to mount the bracket to the ventilation-grill of the router.
A 10" rack mount for the WLC2504. See also my 10" rack mount for Cisco desktop switches .
✅ DESCRIPTION Cisco Catalyst 2960-C Rack Mount Bracket – 3D Printed Replacement This is a custom-designed rack mount bracket compatible with the Cisco Catalyst 2960-C Series LL compact switch. It functions as an alternative to the…
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
Fits on Stanley Laser Level tripod (a round pole about 27-28mm diameter) and adapts to Cisco air-ap-bracket-1 for WiFi Surveys. prints without support insert an M8 nut mid print 5xM3 screw inserts + screws for Cisco Accesspoint eg 2702
Support for Cisco SG300-20
With thanks to BaldGuyDIY and MakeWithTech on youtube for the tutorials, and of course the amazing folks behind OpenSCAD. I needed a case to protect Cisco Duo keyfobs for my employer, but there was nothing available that I could find. I…
This is my first design of a vertical stand for Cisco 800 Series routers. The manufacturer does not offer such accessories, so I decided to design one myself. The inner dimension of the width is 46 mm. The router's height is 44 mm without…
Small switches are convenient to be mounted under the desk, but not all have reliable mount holes. More over, Cisco ones have vents of the box, so we don't want to cover them. PLA works just well, if you are afraid of the temperature, use…
This is a recreation of Cisco's stack module for the 9200 and 9200L series switches. Cisco requires an adapter bracket in order to use a stack cable in with these models. Despite selling the cables individually Cisco does no allow you to…
Tight fit lens cap for Cisco P60 Camera. This design is inno way endorsed or approved by Cisco. This is a prototype, supplied without warranty and as-is. Use at your own risk. Category: Camera
Broke my strain relief for a cisco catalyst switch so designed a replacement. The files are all of the same thing, just grab the one you need. Short description why this came to be here: https://youtu.be/IncNisl5Qp0
This was made for my 2U CISCO UCS C240 M3 Chassis to hide the unattractive front since I didn't have any drive inserts. It could be compatible with other 2U servers, provided the front is even with the chassis. I used double-sided…
Switch + Router Keychain Beautiful elements of network topology which you can carry with you everywhere and show that you are a network expert as you are prepared for everything at all times. Wear these awesome accessories with your…
For creating measuring stand used next components printed AP Holder of course Cisco AP AIR-AP1852i-E-K9 with metal ceiling holder aluminium pool telescopic pole, for ability tu put Wifi AP to as stand base Soundking SB400B cable clip for…
San Francisco Ferry Building STL derived from surface geometry model by https://www.thingiverse.com/mishukutti/designs. Converted the OBJ to STL. Used ORCA slicer to fix manifolds and removed the ground.
Needed this to replace mounting plates. Has been made with different screw holes. Printed with 0.4mm nozzle 2 walls and 3 top and bottom layers 20 percent gyroid infill. 99 percent scale seems to fit bit better than 100 percent. Supports…
Remix of the original design by ryaninc to allow the piece to be used either with the tab facing up (if the phone is wall mounted) or the tab facing down inside the phone body (If the phone is just standing on a desk). Printed it on my…
UPDATE: I had troubles with the spring strength as well as engagement tooth angle and fidelity printing in the orientation I needed, so I have created a V2 that has a “tooth” bar that prints horizontally on the build plate (indicated by…
Hi, I made stand for Cisco Aironet 1140 Series. I use the stand for better cooling. The stand can be placed on the grid of a 12 cm fan. In my case, the stand prevents the fan grill on the rack from being covered and guarantees excellent…
A simpel cisco AP mount adapter for mounting APs on very specific ceilings. instructions: PLA 0.2 mm Print upright with brim
Made for a 5x4 slider base which you can find here: https://www.printables.com/model/356119-customizable-slider-puzzle-base-2x2-6x6 Tiles are meant to be glued in but if you play with scale % by a little, you might be able to get the…
Guide - Magnet Cisco Icons: Accessories: Magnets are 3x3mm (3mm height x 3mm diameter). There are two versions of switches and routers, and all are provided in sets of 3. Each print has three holes on the back. If using neodymium magnets,…
This is a very simple organizer/insert for the 1906 San Francisco Boardgame from Looping Games. Feel free to remix it to suit your needs. [Spanish] Este es un inserto sencillo para el juego de mesa 1906 San Francisco de Looping Games.…
I was inspired by the IKEA Skadis Netgear bracket from mariospinaci and designed my own bracket for my Cisco switch. The outer dimensions are 170mm x 40mm x 115mm. The inner dimensions are 166mm x 34mm x 113mm.
This is a replacement "clip" for the inside of a Cisco 7970 (and any model with the same case). As you can see in the image the original clip disintegrated so I decided to model is in Fusion 360 and print it. There are two versions. The…
Wall mount for Cisco AIR-AP1815T VPN router. Prints in two pieces that need to be glued together.
wall mount on honeycomb No need for support
This badge holder is designed to contain both a Cisco Duo FOB and a standard ID badge. It requires the badge to have a hole in it for a lanyard loop. Material: PLA, ABS/ASA, or PETG (preferred) Print Settings: I printed these in PETG, 3…
Simple holder for mounting a Raspberry Pi 2/3/4 into a CISCO wic, hwic or ehwic addon-card slot. For RasPi 4 just print mirrored (Pi4 has USB and RJ45 swapped) The formfactor fits quite nicely but there is not much space between the pins…
I could not find a printable replacement for a $40 kickstand on a $75 phone and it was definitely not cost effective to buy them from Cisco, so I whipped this up. This is VERY basic but it works and it fits the phone. It holds in place…
Figura 3D estilo Funko Pop basada en un personaje del siglo XX, representado en pose de desfile. Diseño caricaturizado, con proporciones chibi y detalles simplificados para facilitar la impresión. CON SOPORTES(dependiendo del tamaño)