McLaren F1 LEGO Wall bracket
Printet on prusamini with low detail and 15% infill
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
- Pobrania
- 812
- Polubienia
- 107
- Ocena
- 4,82
277 modeli
Printet on prusamini with low detail and 15% infill
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Wydruk około 7,00 €–8,56 € nettoWstępna wycena jednego wariantu
the strength and quality of the model is sufficient for children. It passed the kids' stress test Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Red and Black Filament material:PLA…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
nice detailed MclarenP1 silhouette to decorate. You can adjust the size as you want in your slicer.
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
Very nice and detailed model in Wall Art format of a Mclaren 720s Spyder.Size can be changed. I accept model suggestions
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Wydruk około 5,90 €–7,21 € nettoWstępna wycena jednego wariantu
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
Wydruk około 5,58 €–6,82 € nettoWstępna wycena jednego wariantu
I made this to hang the LEGO McLaren Formula 1 (#42141) to the wall. Just screw the model into the wall (I used one of the two holes, with a drywall anchor, because it was hard to get perfectly level), then slide the car onto the hooks…
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…
Mclaren mcl35, mclaren f1 car for 2020 season
The legendary McLaren-Honda MP4/4, one of the best F1 platforms ever designed, can now be yours (at a scale of 1:21 and without the ability to move, but still pretty cool). Designed to compete in the 1988 F1 season, and powered by a Honda…
This is a simple stand for a Lego Technic F1 McLaren Car
Please add your makes when you are done This is a PLA printed 3D part designed by myself in Fusion 360. The wall mount is multi coloured to help it blend in better with the wall and the wheels. Only 1 fixing is needed into the wall. I…
Experience the thrill of supercar engineering with this 3D printable STL model of a McLaren Sports Car. This aerodynamic performance model is perfect for automotive enthusiasts looking to display the sleek design and exhilarating speed of…
Please click if you appreciate my work :) The British hybrid missile. This 3D printable sculpture of the McLaren P1 captures the spirit of one of the greatest hybrid hypercars ever made – in a sleek, wall-mounted format. The flowing aero…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
This is a wall mount for the Lego McLaren Formula 1 car. It's twisted to give an artistic pitch, roll and yaw to the car, making it look like it's flying out from the wall. Locks into place onto the underside of the lego car, and mounts…
Maqueta del mitico McLaren Honda MP4-4 de 1988 con el que Ayrton Senna ganó su primer mundial de Formula 1.
Tiny F1 McLaren MCL40, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
For greater authenticity of the McLaren F1 GTR model, I created rims in the same design as the original, including the OZ logo. I used the idea of attaching the rim to the model from the author of the wheels on the Ferrari F40. Thank you…
McLaren 765 LT Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick…
Welcome to The Low Poly Auto Show! This is a McLaren 600LT. Print this model with NO SUPPORTS. Details/fit may not print as intended if the print is scaled down. As is the spoiler is very small and delicate. This model is designed to fit…
Wall mounting your Lego Technic model frees up valuable desk or shelf space, making it a great option for smaller rooms or offices. Custom designed bracket specifically tailored for specific lego technic supercars and provide a secure…
This is a remix of a model I found of the McLaren F1 GTR from the 90s: https://www.thingiverse.com/thing:3770 . Being one my favorite cars, I really wanted to print out a full-poly version. Unfortunately, this model would have been a…
Mod for all mclaren fans who have a G29
F1 Mclaren MP4-30 2015 Steering Wheel. Mclaren MP4-30 2015 Steering Wheel full scale replica. 129 pieces relatively easy to print with the 0,4mm nozzle and simple assembly. It is a model that requires a little more time than a single…
This is a OpenRC F1 body inspired by the 2017 McLaren livery. It´s meant to be printed using dual extrusion. I have printed it using a BCN3D Sigma. There are two STL´s per part. Color1 and Color2. the color name is consistent and the same…
A simple display stand for the Speed Champions Lego McLaren Formula 1 Race Car (#76919). MMU/AMS friendly but they are not required for the single-color version. F1 logo is optional with alternative model files provided! This model…
Please link the model if you like it! 'Hello everybody feel free to download this model for personal use, if that are for commercial use you need to pay. its a good way to get your lego cars on the wall so you have more place hope…
This is a complete replica of the McLaren F1 Lego Speed set 76919. I recommend to scale the lego's to at least 200% to print all parts more easily. Almost all bricks can be printed without supports, oriented with their bottom on the build…
Capture the iconic racing heritage with this 3D printable STL model of the 1993 McLaren MP4/8 Formula 1 car. Known for its innovative design and legendary drivers, this model is a must-have for motorsport enthusiasts, Ayrton Senna fans,…
Perfect way to show off your McLaren pride at work or at home. This logo uses 3 filament color changes and doesn't require AMS/MMU. The model will be at a slight angle on a desk. Use ironing on top layers for a nice finish. Add 2 color…
This is a simple two screw wall hanger for Lego 42228 McLaren MCL39 F1 Car. Requires a red 2 long Lego axle piece, or a Lego Technic 2 long pin. These should be included in the extra parts with the set itself. The second picture shows…
Adapter for mounting the original Fanatec Magnetic Paddles on a Fanatec McLaren GT3 V2 Steering Wheel. Cable adapters are still required for the connection on the board. The adapters can be found under the following links.…
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…
Recreation of 720s rim as close as posible for LEGO technic enthusiasts. Compatible with tyre 81.6 x 44 ZR Printing options: Printing outter and inner part separately. Outter (part with spokes) print with supports Printing the combined…
A simple McLaren logo keychain. Print instructions Print Settings: Material: PLA 0.2mm Layer Height 215C nozzle 60C bed 2 perimeters There's one layer of infill, so infill percentage doesn't really matter. But I ran with 20% Grid
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
I was not happy with the wheel disc design on the Lego McLaren F1 Car released in 2022 (Kit 42141). Designed these as a replacement. The model you see printed in the pictures was done using a variable layer height of 0.2 at the base all…
i printed all parts out of petg, and just printed out the face plate in two parts then used it as a template to cut it out of aluminum, youll also need some m3 brass press in nuts for back plate and shifters
McLaren Formula 1™ Race Car 42141 | Technic Remixed the stand to be a little cleaner looking
Ich habe hier mal ein Drehknopf für das Fanatec McLaren GT3 Lenkrad konstruiert um die Knöpfe farblich verändern zu können ————————————————————----------------------------------------------------------- I designed a rotary knob for the…
My daughter is a big Lando Norris fan so I had the idea of combining his LN4 logo with the Mclaren logo in something she display. The model is created in 3 parts for multi colour printing. For the lettering on the base just do a colour…
The McLaren Logo as a keychain Instructions pause the print to change color ;) Category: Keychains
McLaren car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 80% to make it more comfortable and less bulky.
Skadis wall mount to fit the Mercedes F1 (42171) and the McLaren F1 (42141) Lego Models. Wall mount is printed in multiple parts to reduce the amount of supports needed, I would recommend tree supports for the main backing plate.
Saw the opportunity to add the Mclaren logo to the model and it came out very nice.
Everyone wants a custom wheels for this MP4/4 Lego set are same reason… However, I can't found a after market parts, so I carry on my first try. Project characteristic Blender based project. Referenced to a lot of MP4/4 public source. My…
McLaren P1, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Lando Norris from McLaren . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
Wall mount slips on to rear tires and is's mounted on to the wall via two screws.
This is a simple stylized mini vehicle based off of the mid 90s McLaren F1. All pieces can be printed with no supports and no extra hardware or glue is required for assembly. I got the best results by enabling the extra perimeters for…
Wanted to explore the technique used to make my previous Formula 1 Logo trophy, so I decided to make one for Mclaren! Printing I was able to print all parts with no support and a 0.2mm layer height. The stl files are labeled with the…
Introducing the Clare Embroiderer's Assistant! The Clare table stand is your third hand, giving you the fine adjustability of a handheld hoop while leaving both of your hands free to stitch. From her place clamped to the table, she brings…
Remixed so there is no gluing involved. Print and push onto the axel rod.
Modelled without backplate/paddle shifters. 32cm diameter. Feel free to complete/modify anything
Case for a 4" or 5" screen designed to be used in conjunction with the Fanatec McLaren GT3 steering wheel. It requires a sponge tape on the back of the screen to prevent movements, and perhaps a small drop of hot glue on the USB mount to…
Wall Art Silhouette model of the McLaren Senna GTR Racecar. Adjustable size. I accept model suggestions or ideas.
Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art
puede que los ejes no funcionen😅 si es así coméntenlo y lo arreglo en una segunda versión😀👍
Remixed so there is no need for support when printing. For greater strength print with model straight up and increase perimeters.
Morro del McLaren de F1 MCL60 del año 2023
VMcLaren F1, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
McLaren logo designed to be printed on a single extruder printer. With color changes every 1 mm.
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Oscar Piastri from McLaren . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
Bracket to mount Lego McLaren on the wall
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
McLaren themed contoured fridge magnet. A clean and simple design with a 3D extruded logo. Print in a single colour for a simple solid coloured magnet or print in 2 colours for a contrasting 3D effect. If you want a silky smooth top…
This is a perfect way to show your support for Lando! This model has a raised “4” to accentuate the genius of his logo. Choose your colors to determine how much you want the 4 to stand out. I chose a dark blue (burnt titanium) for a…
Mclaren Mini Wall Sculpture Layer height: 0.2 - 0.3 mm Enjoy!
meet Clare the bear 5 color and 4 color versions inc in 3mf file print face up
Mclaren MP4/4 F1 Car, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
I dont have a video of how to install but srm did a video that gives the idea. hope it helps (2) Srm Magnetic Shifter Upgrade - YouTube i printed on prusa mk3s in petg with no supports. for parts youll need i used some x6x¾ wood screws to…
Horizontal stand that holds and displays your LEGO F1 model in a 45º angle. It is designed for the: Lego McLaren 2025 Speed Champions series.
Designed to match Large size Command strips. Lego style adapter to connect into the bottom of the base mount for the car. Print 2 mounts and click into the locations shown. There are two mount lengths depending on the offset you want from…
Mclaren W1, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
I designed and printed this model for a friend who is a Mclaren fan. Is my first ever design in Fusion so I accept suggestions, recommendations and constructive criticism. I designed the letters to be printed individually in any size of…
I designed this mount to hang the Lego McLaren Formula 1 Race Car (Speed Champions, 76919) on a wall. Once printed I saw that it also makes a great desk or shelf stand. The bracket fits snugly into the two recesses in Lego brick “Vehicle…
LEGO set 10330 McLaren Senna Formula 1 car tyre with logo's and no number My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original F1…
This is a orange (any colour you like) mclaren 720 S fully ai generated and you can remix and colour it also post your own colour or add stuff to it if you like but remember to add credits please, make with supports for the bottom of the…
Mercedes McLaren SLR 722 TRUMP This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
Print at 0.2 or better resolution
McLaren F1 team logo, printed with MMU3 and MK4 using texture sheet and the following rolls setting: Roll 1 - black Roll 3 - white Roll 4 - orange Total thickness is 1.6 mm and black and orange are 0.6mm inside.
McLaren Formula 1 logo keyring
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. Collect all the CarSilhouette!
Got this model from my wife for Christmas and since the space in my office is very limited, I wanted to hang the P1 to the wall next to my Lego Lamborghini Sián. For the Sian I printed the very nice wall mount from @WorstCase about a year…
A detailed model of the MCL35 Formula 1 car driven by Lando Norris and Carlos Sainz during the 2020 season. Perfect for F1 fans and motorsport enthusiasts. Designed for easy 3D printing, suitable for both small and large scale prints.…
Mclaren Senna, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…