947 modeli
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
This model is used to hold a 330 ml can on bicycle bottle cages.
2-colour Monster claw keychain.
My 6 year old wanted these for qite some time and there was not any nice model so i made him (pretty) safe pair that should not break easily. Should be printed with supports under claws, placed on the flat part. No post processing needed.…
This model is used to hold a 500 ml can on bicycle bottle cages.
Introduction Do you have a woman in your life? Does she have hair? Or maybe you are your self are a person with hair. Then do we have the thing for you! Here we have an outstandingly modelled claw clip that holds hair all day long! And…
More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…
I created my Velociraptor Claws Scratcher for everyone, who like Dinosaurs and need stylish Scratcher :-) I tried to design my new model like funny and useful tool, to can scratch on too far places, like back. I took a one original model…
CZ (EN version follows): Na školním RoboKroužku si naše děti hrají s Elecfreaks Ring:Bit Car . Pro naše hrátky by se občas hodil “chňapák”. Chtělo to něco s minimem součástek, snadno tisknutelné, co by děti dokázaly bez potíží sestavit.…
I had this project cooking for several months now, mainly because I had to take a break and actually play the game but today I decide it's time to showcase the end result of my 3D-printed Hackclaw figurine based on the original model. The…
Pets or annoying loved ones need scratching so often it makes your hands tired? Do it the Ninja way, and put a set of claws on your hands instead. Saves those tired forearm muscles! Have a little Ninja-in-training who keeps tearing up…
Ported from HL2 zombie torso model, cut the model from its claws and there it is. All supports, size, parts etc. are up to user to tweak and change.
22370 Honeycomb FTC Centerstage Claw. Instead of stacking pixels vertically, they are held horizontally.
Ik heb ook de ophanging bewerkt. Ik had er al 1 gemaakt (https://www.printables.com/model/575502-handdoek-droger-voor-keukenkast-en-badkamer-towel-) maar nu heb ik hem dieper gemaakt dat de handdoek beter blijft zitten. I also worked on…
This set is (2x9 - 2x4 + 2x5) will hold (1x) 12" Stanley Wonderbar and (1x) ESTWING Pro Claw Nail Puller - 9" Each half holds 1 tool, so a person could mix and match with other tools. made from my flat bins here . The geometry for the…
This is Holster Claw specifically made for a DIY Holsters. I made it for me and my friend, who make a DIY Holsters. I took a one original model by KCreative-Extension11 from Printables and I make only modidications and used on holster.…
22370 Honeycomb FTC Centerstage Claw with Bee Topper. Instead of stacking pixels vertically, they are held horizontally.
How long can you go... New Toy with options 3, 4, 5, 8 or 10 arms long. Print in Place so You Print & Play. Use a 3, 4 or 5 arm for a working toy. The 8 and 10 arms has too much friction wh printing with PLA TIP: Needs a tiny bit of…
>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…
Meet the Mini Claw Machine , a tiny 3D printed claw toy designed to be built in just two pieces: the main structure with the claws and internal spring, plus the rod that connects everything and makes it work. Once assembled, simply push…
I know other models exist, but nearly all of them have a lip on the top which goes over the knuckle. I'm more fond of the design where the claw just comes out between the knuckles, so I made this. Just plug the blades into the grip and…
Wolverine claws for cosplay or display. Only one claw file. Placement on hand determined by how far forward the claw is on the handle. Recommend testing fitting each claw one at a time starting with the middle claw. July 2024: Added more…
And now Dummy 13 is also a Weapon X.
What started out as a new version of the Blaster Arms ended up becoming a Power Claw, crazy how lack of focus and random prototyping works, aye? The claw takes a bit of extra force to get onto the arm immediately after printing; it…
At the provided scale, the inner diameter of the claw is 10mm. Scale it up to fit your use case. To make a thumb claw, I also scaled the model down in the Z direction so it would be stumpier. Normally I would provide a source file so you…
Print Instructions Print the parts as listed down below. All STL files are in their respective print orientation! I used the default 0.20 mm QUALITY preset on an Original Prusa MINI+. Bucket Segment Activate 'brim' and consider decreasing…
The model is to be printed in 4 parts: 3 claws and the grip, and then assembled and glued. Consider the horizontal expansion setting in your printer to make the parts fit. Dimensions are 21 cm long and 6,5 cm wide. To legally sell PRINTED…
Here is a modular hair claw clip with 3 different claw. The system is very simply. Improvement: With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35…
Little finger claws for funsies! Use with caution as it can be sharp. Not intended for children under 12. May cause injury. ---------------------------------------------------- V2 IS NOW INCLUDED AND FREE!!!!!…
This is a Version of cncmodels4you 's hogwarts house crests found on Thingiverse https://www.thingiverse.com/thing:4541930/files I painted them in Prusaslicer with a lot of detail.
For the little ones... Hehehe, it's really for me! An Open Source Project - Fusion360 File Available! Print instructions Just Print Snap and Play Use the extra arm g-code file to make it longer
If you want to print something for your wife, mother, sister, someone with long hair that maybe needs it, or yourself. Well here you have it, a nice print in place hair claw clip, no need for springs, bolts or other materials, just print…
Scaled the original part up a bunch to save a step, and added 3 holes to use for alignment. Print two copies, one mirrored. Remixed From: Alan Grant's Raptor Claw by SagaWorkshop Print instructions Cut three small pieces of filament,…
I made this claw model for a cat fursuit. The holes are meant to be used for sewing the claw to the glove. Adjust the size for each finger before 3d-printing. Print with a flexible material like TPU.
We really dug into the Jurassic Park theme this 3D Printopia, formerly known as ERRF. CM Designs created an iconic prop, the raptor claw. The filament colors were included with the latest Protopasta Filament Subscription. Subscribe to…
I flattened the base of the claw for better adhesion, and re-oriented it to remove the need for supports. PS The symbols on the Gold claw are not correct. They are actually for the Emerald Claw. - thanks to TacoScientist for pointing that…
Sorry for the wrong files last time. Now it should fit a 235 x 235 mm build plate. I would recommend gluing the center rod in place to keep everything from spinning. It's made for cosplay only.
Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.
You need 6x “Link”, 6x “Shovel” and 2x “Spyder”. All parts screw together with M3 bolts and lock nuts. Don't tighten them to hard, the joints have to move freely. Attach a string to each Spyder parts. Thread the string from the lower…
Introducing the the Clawstrider from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 40mm base. It is intended to be printed in one piece for stability. All credit for character design goes to…
I remixed the scaled remix to print this model whole, vertically. It turned out beautiful, so I wanted to share it. No assembly necessary! Due to the remix having pin holes, this model still had those internally but it doesn't affect…
A simple render of the Claude Code mascot, Clawd. If you print clawd.stl, you can change the color of the eyes with a simple filament change; otherwise clawd_singlecolor.stl has the eyes embossed.
Update 18/11/2022 Thank you all for sharing, printing and enjoying this humble print. As I found that many removed the logo, I took it off and uploaded a bookmark. I also added a longest version, for those that need something over 10 cm…
This is a model I designed to let people have a chance to make claws for a dummy 13
PRINT-IN-PLACE HAR CLAW CLIP This is the perfect gift for your mum this Mother's Day, it's not a remix, it's a complete redesign from my previous hair clip. It works better and the smaller version prints great. FOR THE LARGE MODEL YOU…
Just a random finger claw. Designed for: Inner diameter: 18mm finger lenght max.: 75mm Printed with 30% infill and brim. No support needed.
This Black Ram Hand was designed to be BIG. It is entirely 3D printable including the bolts and nuts. Use it to grab and pick up huge items without skin/hand contact. 50% larger than the size of the Mark V, its can be attached to your…
I have designed this version inspired by swords and other retractable models. I have noticed that depending on the filament the performance may vary. For example with PLA+ from Sunlu I have better results than with CosPLA from Polymaker.…
Introducing the Fireclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 100mm base. Use with the Fireclaw expansion during gameplay for the 4-legged stance. It is intended to be printed in…
Has a flat side to print standing up as pictured. Scale to desired size. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I've included a low poly version that was ripped straight from the game files and a subdivided version.
You need only a good 3D printer and 8x 3mm screws.
This model is a lightly remixed version of the model I found from Natalia Mona Tj over on GrabCad. (https://grabcad.com/library/clawfoot-bathtub-claw-foot-bath-tub) I scaled it down and beefed up the legs for strength, trimmed some…
Recently I bought my mum gloves with claws for the care of flowers in the garden but the available size was too big. So i decide to use 3D printing, to solve this problem and now the claws allow for comfortable work. After dealing with…
From the Smithsonian 3D Digitization library, I have converted the mesh to STL in Blender. Print with supports with the base of the claw near the build plate, point of the claw straight up. 1:1 Allosaurus fragilis Marsh, 1877: Claw…
Infernal Claw Mug – A demonic 3D printable coffee mug straight from the depths of Hell! This striking mug features a massive demonic claw aggressively gripping a clean cylindrical cup. The devil's hand emerges with sharp, twisted talons,…
Finally, I can fix the biggest problem with the original claw! Some people said they had issues printing the original claw fully upright since the joint might snap off due to the print lines. Not anymore! I went back and refined the…
Clamping Claw in two sizes with M6 thread for a CNC my recommendation: -> petg -> 250/70 degrees celsius
A awsome pair of claws for Dummy 13.
Why? I wanted to make a claw using this model and I learned it was made originally for a laser cutter. I have spent many hours perfecting this for a 3D printing. What is needed? You can either print the Claw.stl or print the following: 4…
A tool for eating while multitasking. Eat chips, fries, or anything else without getting any on your hands. Perfect for snacking while gaming without worrying about Dorito dust on your controller or keyboard.
Print it flat on the print bed whitout supports
Introducing the Frostclaw from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. Use with the Frozen Wilds expansion during gameplay for a cosmetic 2 legged stance. It is intended to be…
I'm using my design for FTC 2022 and it works great, + it's light.
Paint base on black and nails on off white Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.16 Infill: 25% Filament: --- PLA White Notes: La pintura es la clave.…
Advise to print with 100% fill to lower buoyancy and smallest possible layer height (mine goes to 0,08 mm). Chose water resistant materials like ASA or ABS. I may have overdone with supports here.
Hi Ryan, Here are two very clean cut model cowl versions of the black panther, but hopefully the Neckless and Claw will be ideal for you and your sons project, Please double check the sizing, as I try to generally make it round medium to…
Can't get the raptors claw in game so I modeled my own! I positioned all the handle pieces in the intended orientation to minimize the need for supports. Only 2 of the handle pieces need supports but the areas where supports touch are…
I loved the look of The Back Scratcher but found that those tiny points didn't offer as much scratching satisfaction as I wanted. So I replaced the focused tips with wide blades for maximum scratchage. And then, while I was at it, I threw…
This is the Pact Dragonclaw Circlet from the game Elder Scrolls Online. https://elderscrolls.fandom.com/wiki/Pact\_Dragonclaw\_Circlet To be printed and worn on your head, or to decorate a shelf. It's designed to be printed without…
halloween is coming! enjoy it with these claws
My hardest to print cauldron! Brims + Supports recommended. Check out my whole cauldron collection! Happy Halloween! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
A better-looking version of my other box opener ( The Raptor Claw (Box Opener) by Voltz18 | Download free STL model | Printables.com ) Using a real velociraptor claw as a reference, I made this one look closer to how it should. In other…
just repaired the model
I have improved some of the popular Stealthburner Patterns with the following attributes: transferred them to the release version of the Stealthburner Main Body made the color patterns 1mm thick, so that also weaker colors can shine and…
Printing Scaling: The inner diameter of the ring is 10mm. You'll need to scale it according to your finger size. For that i recomment mesuring the circumference of each finger tip and scaling the ring according to the following formula:…
This is a high gripping force clamp configuration (relative to other FDM versions) that was re-engineered to included the following features Triangular Cross-Section Threaded Drive Rod. This insures the drive rod is always centered in the…
Attribution : this is a REMIX of soozafone's Dummy 13 "Claw" hand pose found here: https://www.printables.com/model/999963-dummy-13-extra-hand-poses Added some pointy (maybe too pointy) claws. Intended for a D&D Leonin but good for any…
My goal was not to be as accurate as possible but to make an easy-to-print look alike krueger's glove. And it's really easy, you can't miss it, no support needed. You can easily modify the finger dimensions to fit your hand in the…
Printable scan of a Deinonychus claw.
This is a remix I did of a model on Thingiverse a few years back. The original was taken down, so I cannot credit the author, but they did a great job. This is a minor remix of the original where I removed some weird geometries and holes.…
Fursuit claw model with flared base
A simple box opener in the shape of a claw. For you lefties, just mirror the model.
Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot compensation 0.15 mm Supports None…
Blaster overview: https://www.youtube.com/watch?v=glRXdd7pP-U Printed plunger tube overview: https://www.youtube.com/watch?v=QpMW5P51Vow Full assembly video here: https://youtu.be/Mo5sGpauzpw?si=SMMSYdP7EJdTvixH This is the Low Hardware…
This is a working candy claw machine that has many 3D printed parts. We shared this at ERRF 2022. Have a look at what it does here: https://youtube.com/shorts/K-8PsoMRIVw Note: Watch the different model files, you don't need to print them…
This remix of user guillermytho 's Claws Bookmark allows an easier fit between the two bookmark parts. Spacing tolerance has been increased and is now deeper, allowing easier installation of the bookmark tab and potentially providing a…
Christmas is over and it is time for replacing the Christmas tree by something else. What about this one? The Rock Claw Plant has the strange habit of lifting large rocks with its strong, claw-like branches. Actually, I have no idea why…
Fits all the components of Spirit Island + Branch & Claw + Jagged Earth + Feather & Flame in a single box, with minimal lid lift (9.6mm), for sleeved cards. I only left the rulebooks and helper cards out - everything else is in the box.
Mar. 02, 2025 V1.0: First release on printables Based on DUMMY 13 1.0 - Nov. 2024 Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0 I designed them for my upcoming projects. They look very similar to Venom's claws.…
supports : no rafts : yes infill : 20% or more material : pla or petg weight on 20% infill : 33 grams non-portable easy to setup version https://www.printables.com/model/938547-portable-msi-claw-stand
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
A nice claw-foot pedestal for your Echo Dot. Print as is for Echo Dot 4, or at 120% for the Echo Dot 3. Remixed from https://www.thingiverse.com/thing:1307300 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
An easy to print attachment for a golf putter for retrieving golf balls. Print flat on its side, works with PLA but a slightly more flexible filament like PLA+/PETG may be even better. 4mm countersunk screw hole (customise as needed via…
this is a remix of the voron stealthburner toolhead with claw marks for a little bit of flair
Here is the File for my Ravenclaw inspired wand. The Raven grip makes it perfect to show your House Pride. I hope you enjoy Thanks Bugman If you like what I am doing please consider buying me a coffee or tipping. Buy me a coffee
print spring in PETG assembly: press spring into the follower, use a knife or similar to press it all the way down slide the follower assembly up in magazine ( big chamfer facing backwards ) use the bottom to compress the spring all the…
![Skyrim Dragon Claw [improved printability]](https://media.printables.com/media/prints/192164/images/1786079_8aa72619-5f92-466c-9a64-627303046a56/abd3bfabd2f6f1685f666f3cd719b3eb_display_large_19.jpg)
