440 modeli
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…
This is a slicer config file for the Anycubic Slicer (tested on 1.3) that will work on any Kobra 2 model. You may have more configurable options but the main settings in this file will help almost everyone. Added Gcode before and after…
I had an old USB drive around with a broken mechanism in the case so I decided to print a new one. The openSCAD model is very configurable, so you can configure this for your USB drive, or whatever else. One possible improvement I would…
Have you ever wanted to redo your first-layer calibration, but you have a 0.6mm nozzle installed (or some other variant configuration)? The STL file below allows you to slice a first-layer test print for your printer's particular…
ENGLISH VERSION A pill box that everyone can organize according to their needs. Either for daily sorting with morning, afternoon, night, or daily Monday to Sunday. If desired, the lid can be secured magnetically. The magnets are inserted…
Thanks to the great work of steffanders , I was able to design a configurable bottle with a PET closure. The height and diameter of the bottle can be adjusted. I have created three example bottles, and more bottles can be created through…
Have a rounded emoji box for your stuff - now the box itself says what's inside! Customizing Use OpenSCAD or the makerworld customizer to adapt the emoji and sizes as needed! Multicolor model Create with type set to: “both”, and save as…
First look at 3D pinball I'm making out of old door latch solenoids that have been lying around doing nothing. As a kid I wanted to make a pinball machine. So with just a few solenoids, a 3D printer, and some bits and pieces I'm going to…
This is part of the System 58 collection of boxes. They are designed as inserts with non-standard sizes, but can also be used as stand-alone boxes with or without lids. Other parts of the System 58 collection:…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
This is my Flying Bear Ghost 5 PrusaSlicer Configuration Bundle. Settings are made for a fast print, while keeping good quality. PLA is printed at 200° C with printbed at 60° C and PETG is printed at 220° C with printbed at 60° C. If you…
Start G-Code (Version-Date 29. May 2024): G90 ; absolut coordinates M83 ; extruder relative mode M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling M140 S[bed_temperature_initial_layer_single] ;…
My configuration for PrusaSlicer. I will gradually edit the profiles. Printer: Creality Ender-3 V3 KE Print Setting: 0.10mm and 0.2mm | SLOW, NORMAL and SPEED Filament: PLA, PETG, TPU (SPEED has disable auto cooling) 🆕 for all nozzles on…
Do you have some new, fancy dual-color or tri-color filament to play with? Are you wondering which angle to best rotate your model before printing? This Multi-Color Filament Configuration Disk or “MCFCD” will help you determine the angles…
you need select klipper machine and import json files.
OG Lament Configuration for your Hell Priest or Kirsty Cotton cosplay in homage to the classic horror, Hellraiser. An actual, working puzzle box! Do you dare enter "The Labyrinth"? Updated for ease of printing and assembly. It's still a…
deutsch weiter unten english First of all, a little advertising on my own behalf: I recommend you take a look at my latest box with swing stopper (…
I do not use Cura and so I created a PrusaSlicer profile for the Elegoo Neptune 4 Pro (should also work with the non-Pro). This not perfect and there are still some things that need tweaking but it works well for me with the included PETG…
Update 7/9/25- I am uploading a new file for this as the Y coordinates changes when adding the CFS upgrade kit. The new Print Volume is 300x295x300 as per Creality Wiki. I discovered this issue when trying to print my Z offset test and I…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S
A keychain with your or your family/friends first name, written in individual letter beads. The beads are connected flexibly with rings and move after printing. Its also nice for fidgeting . Note that this model is print-in-place, so no…
This is simple test cube of 20mm dimensions with a 10mm hole. The Fusion 360 file is included as well. I had a lot of trouble getting TPU to print and wanted to share how I did it. For adhesion issues on the MK3s I used blue tape on the…
A keychain with your or your family/friends first name, written in individual letter beads. The beads are free to rotate and move after printing, so its also good for fidgeting. Note that this model is print-in-place, so no support…
The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…
Configs with recommended PrusaSlicer configs into Bambu Studio specifically for 3D Lab Print models - does not work for Cura Surface mode models, not available in Bambu Studio. Internal structure correctly prints :)! See json files in…
This is a spool holder designed to mount inside the Original Prusa Enclosure. It has a spindle that screws to the main bracket, so that an extension piece (or a longer spindle) can be screwed in when you want to use a 2kg spool. To…
So here's a config bundle. This bundle includes all the profiles ive made specifically for my stock FLSun V400. It also includes the V400 printer configs as well. The Profiles ive made included some layer heights from 0.1 up to 0.3 layer…
download the K2Plus_orca_config.3mf import to orcaslicer
A somewhat functional version of the puzzle box from the Hellraiser movie franchise. Turn one of the dials to unlock the box and allow it to be moved to the star configuration. Does not summon Cenobites though. The face designs are based…
This box is intended to be customized, the default configuration probably won't work for very many people. Simple changes like box size can be made with the OpenSCAD customizer but due to limitations in its capabilities most of the really…
This is currently an untested print! I am sharing this because this is a start/attempt to generate the labels for this box Print Instructions Print instructions haven't changed compared to the original model Label Recommended profile:…
This multi-jaw vise consists of a base plate and 3 or 4 rack & worm jaw units. Pins in the bottom of each rack slip into keyhole slots in the base for quick reconfiguration. Each jaw slides onto grooves in the rack, trapping a worm/knob…
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
OrcaSlicer works very well with KobraMax and massively improves stringing with it's retraction setting "Spiral" Z hop. Only config for 0.8 nozzle is provided, but it is easy to create config for 0.4 nozzle. These settings should be…
A slim wallet for credit cards etc.. Simply configure it the way you like it and that suits your needs. No support needed! ---- Updates 31/7-2022 - New Sideplate: Hexagon with Printebels logo. 9/8-2022 - New Sideplate: Striped. ---- First…
These draw/discard trays keep cards in place. Available in a variety of configurations, such as one, two, three or four bins. (The smoothness of the angles will be largely determined by your layer height resolution.) These were designed…
Motivation: After having issues with my existing lamp sockets in finding a suitable stand for my Moon Lamp, I decided to create a new adapter. With this adapter, the majority of the socket is concealed within the adapter itself, and…
I wanted to start using Orca for all my slicing needs so i made this Profile for my MPSM. It might not be great but i tested it with a few prints and it worked pretty good. I had no issues. unzip the file and import the config. Includes…
About This is a Raspberry Pi 4B case that has a few configurations for different scenarios. The two parts of the case snap together and can be release by pushing in the front sides and lifting up. This case was designed in OnShape.…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
As you will know from working with a wood router , there are many calculators and tools to dimension your templates. Still, after calculating you have to build the template yourself. Here's your all-round package: calculation and design…
K1 Max PrusaSlicer Configs for PLA & ASA Includes my base settings for the K1 Max for PrusaSlicer. The printer config itself has GCode for disabling case/side fans for ASA, and enabling them for PLA. These are rough setups which I haven't…
Install Forge-X on your printer and set it up: https://github.com/DrA1ex/ff5m Import the config bundle into Prusa Slicer and add the build plate STL to the printer profile.
Choose your favorite Element and print it out. No, not the Atom itself, but a bohr-model of the atom anyway. Feedback requested! Let me know if you are about to discover some new elements! I gladly extend my script with your new…
I needed a bit more range than some other temperature towers, so I made a configurable Temperature tower based on: https://www.printables.com/model/38895-temp-tower-prusaslicer-02mm-layer-petg https://www.thingiverse.com/thing:2493504…
Attached PDF contains documentation on how to wire a Filament Runout Sensor using micro switch and a LED indicator for using with any 3D Printer control board, such as a RAMPS. Documentation contains basic configuration info for use on…
This is not only another simple card box, but it is a fully configurable card box for every card size you need. I decided to build my version, adding some improvements and ensuring anyone can modify the inner size easily. You can find 3…
Configurable, print-in-place, self-locking cable label. You can adapt the shown text and cable diameters. Just a single color change is needed to make the text stand out on both sides. It prints fast and you can print many labels in one…
TL;DR This is Modubox, a modular, expandable box Compatible with gridfinity If you like it, consider making a donation [ PayPal | BMaC ] To support this and future developments, consider becoming a patreon [ patreon ] Introduction ModuBox…
UPDATES 2025.08.08: Testing v2 Troubleshooting the problem with PID config (removed control = pid from [extruder] section) Fixed problem with position_endstop error (changed position_min in [stepper_z] section to -3.5) Improved clarity of…
A keychain with your or your family/friends first name, written in individual letters , which form a flexible chain after printing. The chain is fun to fidget with :-). Note that this model is print-in-place, so no support material is…
This is a holder for Sharpies to clip them onto a Skadis pegboard. You can alter the .scad file for number of sharpies and height. The 45 degree cut in the print allows you to print it without support, and include the top and bottom…
Acceleration speed of 6 stages are configurable in slicer. Default configured values, update it as you wish: Perimeters Extermal perimeters 30 19 35 21 40 23 45 25 50 27 55 29 Use any filament, i personally use Prusament PETG glossy black…
VERSION 2 (2023-08-16) I recreated everything from scratch in OpenSCAD The stackable issue is fixed Chamfer (45 degrees) on the lid The label is a bit narrower in this version You can easily edit it and add the label you want (see HOWTO…
After printing a couple of boxes from Termlimit I saw that the source from Sttrife included the SCAD file, so got about making some extra configurations to suit my needs. Of small note... the groves along the outside are a little shorter…
Please note that using a belt drive first stage in place of gears will reverse the rotation of your wheels. You must either swap gears in your transmission or reprogram your ESC to correct this EDITS: 1/26/24: Added multi-body STL for the…
These macros are designed to enhance the Flsun T1 Pro printing experience by improving temperature handling, automating bed mesh calibration, and providing clear on-screen and console feedback throughout the print process. Changelog:…
Box the Configurable came to be as attempt to make a parametric design where a very few parameters had to be changed to get a new use. the file names have DxBxH in them where D and B has to be the same value to have the top part and the…
OctoPrint/OctoPi Camera configuration for Prusa 3D printer MK3S(+) This configuration is used for monitoring and controlling a Prusa MK3S(+) remotely using the OctoPrint software suite ( https://octoprint.org/ ) an RPI4B (…
Here is my personal configuration file for my Prusa MK4S + MMU3. I first imported PrusaSlicer configuration and adapted some bad conversion parameters and optimisation (for my usage). PETG and PLA profile No HF config Only 0.4mm nozzle…
This is a configurable model with (in my honest opinion) a better fit than the original. The fully configurable model is created in OnShape. See this link . Even though there is a configuration available for the height, I don't have a…
I am preparing to design and build a Krauss-Maffei locomotive, so I wanted to practice 3-D printing an entire locomotive. I used Daniel Noree's base design for the OpenRailway EMD SW 1500 and printed a 1:32 version of it that incorporated…
This is a variation of the case by kensikora ( https://www.thingiverse.com/thing:4425758 ) and mc88 ( https://www.thingiverse.com/thing:4589273/ ). I call it a variation rather than remix, because I cannot install 123 Design on Linux, and…
This is a ‘grit guard’ that will stop your car wash sponge picking up grit from the bottom of your bucket. It uses a hexagonal mesh because Hexagons are the Bestagons! Two STLs are included (flat mesh and deep mesh) but you can use the…
The benchy is just there so i can post the config file
See original for more options and details. Trying to keep this release nice and simple. Includes gold inlay as a separate model for a flush finish for MMU capable printers or dual extruders. Print both lower-art-v4.2.stl and…
VKB STECS Base & Back Plate Reconfiguration Pack v1.0 Created by John5 CC BY-NC-SA 4.0 Printable base and back plates to reconfigure your VKB STECS. Including Mini, Mini+, Standard, and Max compatible baseplates as well as a backplate for…
A simple mount in which the PCB dimensions are parameterized using FreeCAD's spreadsheet functionality and that can be secured using two screws. Screw radius is also a parameter to be configured (1.5mm as default). Print settings I used…
Quick test to check if your printer can cope with a specified height. Use configurator to create your desired model height. Category: 3D Printer Accessories
Edit 2023-02-18 - 4-Segment_Configurable_BoxV01.01.f3d Fixed the fillet to the top of the lid where it disappeared when the number of clasps/hinges were changed. Added a fillet to the underside of the hinge bar so it opens and closes a…
I recently watched a video of Japanese school kids using their Soroban to calculate at incredible speed; apparently it also helps with learning to do very fast mental calculation. I was impressed, and wanted to try and learn that – after…
I liked the design of the iPhone Dock which is a remix of, however, when I opened the provided model files I saw it wouldn't be easy to modify the size to fit my Samsung S24 Ultra. Instead of simply messing with the original model I…
The Lament configuration - art by artist064 "The original Lament Configuration was created by Simon Sayce for the original Hellraiser movie". I have attempted to remain faithful to the original design, however it is apparent that multiple…
A simple geometric column/cylinder that is configurable via Customizer and OpenSCAD. Print instructions Unassociated tags: säule Category: Other Summary A simple geometric column/cylinder that is configurable via Customizer and OpenSCAD.
This is a fully configurable stencil. Customize To get a proper stencil, install OpenSCAD and a stencil font on your own computer and follow these in depth instructions . You just activate the customizer and can change the text to your…
INFO My Neptune 3 Pro configuration files. It consists of multiple files, some have essential macros, some have macros to make it more userfriendly and there's a central file with variables to control most macros. My hardware: Skr 1.4…
Edit May 1, 2021 : I suggest using the improved version of this: https://www.prusaprinters.org/prints/65520-spla-print-parameter-test-and-config-file-improved SPLA is a filament type offered by SunLu. Although the name implies it is…
A nozzle that fits Sika containers (not the regular silicone ones!) You can configure the nozzle length and diameter in the link below…
NOTE : This is a WIP, and part of a larger project. Things might change. To create a card box, copy all 4 SCAD files into the same folder, edit CardBox.scad to set the dimensions, and render. The main variables are: //width of a card…
Configurations for : Extrudr PLA NX-2 (works with allmost every PLA) Prusa PETG (or any other but keep an Eye on the Temperatur settings your using) Extruder TPU A97 (Medium) Fiberlogy ASA Fiberlogy Easy ABS Extrudr PETG Fiberlogy Easy…
Bathroom brush holder 06/25/2025 add new model with support plate for click Practical holder for toothbrushes, toothpaste and mouthwash. Different configurations for placement above the wash, or also placed on the wall. The default models…
Parametric pencil box inspired on one I had in my childhood, Is fully parametric modifying parameters in Spreadsheet. Both the lower an upper parts have insertions for separators and pencil holders. The upper part has also those…
V2 update The items are now much easier to write - you can provide them as a comma separated list, which incidentally allows using of various online customizers. ---- Heavily inspired by Nils Kal's Household Task Planner , except…
It is not a difficult model but there are some important details that must be taken into account so that it prints well. I recommend reading the printing instructions. Description and operation This template allows you to create an…
Customizable spool mount adapted for the Ikea Skadis using the Ultimount connector . Remixed from the 1 & 2 Spool wall mount model by Joesn . Comes in 2 pieces for easier, support-free printing, along with 2 support pins (you can either…
The lost Lament Configuration Dice/Box
Battery holder/frame for battery packs. The parameters in the OnShape document can be changed to fit any battery type and any number of rows and columns. Included stl files for a few configurations for 18650 batteries: 2x6 2x8 2x10 3x3…
LulzBot TAZ 6 Config Bundle We recently received a donation of a Taz 6 3D printer to add to our fleet of 3D printers. Unfortunately, PrusaSlicer (as of 2.6.0) only has premade configs for the LulzBot TAZ 6 Aero and doesn't have profiles…
Well its a config bundle and so you have to import it first. If you slice benchy with this profile you will get a benchy in 8 minutes. This is just an upload of the Prusa's profiles used for the example gcode that comes with the printer.…
This is a very handy configurable rack for creating an array of almost any size. The hole size, depth, number of rows/columns is all configurable. Print instructions No supports needed. Just use OpenSCAD to prepare the model, export as…
I can't take credit for the texture files, they were from thingiverse, https://www.thingiverse.com/thing:3826493 Here's a GitHub gist of the config bundle I'm using to print PPE.…
Previously I posted a config file for use with print SPLA : https://www.prusaprinters.org/prints/65005-spla-print-parameter-test-and-config-file While that configuration file works, it did have some problems with stringing. With more…
This is a parameterized/configurable case for camera lens filters. The design goals were the following: sturdy and robust, so that the potentially expensive filter is properly protected ergonomic, easy to grab, hold and handle secure…
You need configurable dogs? You have configurable dogs. You can generate dogs exactly like you want to have them, you can generate a random shaped dog or even 9 random shaped ones in one go. So its easy to start off your own pack of dogs.…
![Elegoo Neptune 4/Pro OrcaSlicer V2.0.0 config [New Firmware]](https://media.printables.com/media/prints/609896/images/6512090_0000f0c6-71c5-412c-915d-776f786325d3_f907e120-f93d-475e-8798-5d4567f5e812/banner-orca-slicer.webp)
