6037 modeli
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
Wydruk około 6,09 €–7,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a toy for my son for when I'm playing on my PS5 so he can “join”, without endangering my real controllers, so I designed this easily printable little controller toy. Just look at this happy customer: Attention and disclaimer: If…
Wydruk około 4,64 €–5,67 € nettoWstępna wycena jednego wariantu
After building /u/GermanDarkness 's Remix of /u/isrussell 's model I had a ton of new ideas to implement! I rebuilt pretty much everything but still used his strum bar and face buttons in this iteration. The end product is primarily made…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
I used a 3D scan of the PS4 dual shock controller and used it to create part of a negative mold to better fit the controller on the stand. here is a stand for single controller and one for 2 controllers. When printing rotate the model so…
Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu
This is made for the Gulikit KingKong 2 Pro controller. I have not tested it with their other models, but it might work with them too. Main Features Pass-throughs for the back buttons (turn off, switch modes, pair) A hole for the charging…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand for two Xbox One controllers with logo.
Wydruk około 7,81 €–9,55 € nettoWstępna wycena jednego wariantu
Print, fold and enjoy :-)
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Want to have a cool place to put your headphone? Print yourself this nice retro item! All parts are seperated so you won't need a MMU, just print them in your desired colors. Assembly is pretty straight forward, just put all pieces…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Description Prevent your Switch Pro Controller from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Controller Stand (PS3,PS4,PS5) 2 parts (Easy assembly) Snap fit Print instructions Controller Stand (PS3,PS4,PS5) 2 parts (Easy assembly) Snap fit
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Stadia Controller Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. A huge thanks also to Coopey for its contour sketch of the…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Hi! These knobs were made to fit Arturia's Keylab88 and MiniLab mk II. I made them after I lost one of the knobs to my Minilab. I suspect they may fit their other products. If you have a different brand of controller look at the 3Dmodels.…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have a Playstation 4, PS4 controller stand for you. The controller fits beautifully into it and is an ornament to any collection of games and video games. The material I…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Wall mountable (3M Tape) XBOX controller and headphone holder,
Wydruk około 4,73 €–5,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…
Wydruk około 3,11 €–3,81 € nettoWstępna wycena jednego wariantu
I like my controller to be stored out of sight, but still reachable from my chair. I recently discovered a model that would hang the controller by the joysticks. However, there is speculation that this will induce drift into the sticks…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update; New revision, got rid of that tiny line and curved the edge that is visible from the front. I liked the original mount, but thought it could use some game storage as well. I took inspiration from the original project, but…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
Introducing the Wire Lock Block for Xbox One S controllers. A simple 3D printed battery pack and cover that prevents the USB cable from being accidentally disconnected mid-game. Optionally the battery pack has a screw hole so that it can…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fully printed clip-on adapter for the modular XBox Adaptive Controller joysticks made by Egon . No disassembly required! Please provide feedback if you have any. Assembly/Disassembly Be careful to not put too much strain on the arm…
Wydruk około 4,79 €–5,86 € nettoWstępna wycena jednego wariantu
wall mount for quest 3 controller
Wydruk około 4,62 €–5,64 € nettoWstępna wycena jednego wariantu
SNES controllers are inherently stackable, so this holder takes that feature to the logical conclusion and makes it possible to store the controllers neatly as a single stack.
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
Double PowerA Nintendo Switch controller stand
Wydruk około 3,18 €–3,88 € nettoWstępna wycena jednego wariantu
Sun shade designed for iPhone 12 (and others when scaled - see note below). It provides better visibility in direct sunlight. As seen on pictures I tried both PETG and TPU materials. I think that TPU is better as it fits the phone nicely,…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There is a large list of radiator fan mounting models Alvomane's Radiator Booster UppsalaHenrik's 2x92mm fan ducts for radiator djtifosi' Radiator Blower Fan with magnetic holder simlrh's Radiator Fan schranzistor's Radiator amplifier…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
Hello, Today I have a Playstation 3 for you, a PS3 controller holder . The controller fits perfectly into the stand. They will beautify any video game collection. Good luck with the printing! I used PLA/PETG as the material. You need to…
Wydruk około 3,37 €–4,12 € nettoWstępna wycena jednego wariantu
A stand for the easysmx x20 controller and its receiver. Basically like the original . I just added a cutout in the back of the stand to safely store the receiver of the controller, when not in use. I printed mine on a CoreOne. The sides…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
Print, insert wire or nickel strip into slot for connecting the two batteries together in the bottom of the battery tubes.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you need to mount a GoPro (or any other camera) on your Traxxas TQi controller get that model and print it out! The camera mount is at 30° angle to let you navigate your RC model freely. I've tested it with GoPro 11 and 11 mini - at…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…
Wydruk około 4,01 €–4,90 € nettoWstępna wycena jednego wariantu
This is an update version of my OAT controller enclosure. The original can be found here: https://www.prusaprinters.org/prints/137723-openastrotracker-controller-enclosure This version has added ventilation holes for better airflow to the…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
grips for the nintendoswitch procontroller, 3D scanned and smoothend
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kombinace s logem
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an enclosure to house all of the required electronics modules for the OpenAstroTracker controller. https://wiki.openastrotech.com It has standoffs and cut outs for the following: 1 x MKS Gen L v2.1 Controller Board with 5 x…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simply holds your controller and takes up very little space. It is very different from most stands. It will hold your controller via the type c connector. I have made a stronger version which I strongly recommend you use. I haven't…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Kresleno v PTC
Wydruk około 3,85 €–4,70 € nettoWstępna wycena jednego wariantu
A mount for Playstation Move controllers to put them on your body for VR tracking. Intended for PSMoveService + KinectToVR/Amethyst , to bring the hardware to SteamVR. However I heavily recommend using Externet 's fork, PSMoveService Ex…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
The Revolutionary Musical Keyboard and Multi-Function Controller (RMKMC) is a versatile 3D printed model that showcases a unique blend of music, technology, and 3D printing at its finest. It houses 8 keys, each assignable to whatever…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Check out the Alpakka controller, its a really nice project, and it works like charm, since I built mine, this is the only controller I am using for PC gaming. I made the joystick cap out of TPU and gave it a fuzzy skin in the slicer…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Experimenting with using a PS5 Dualsense controller as a steeringwheel for driving-games. Model uses my snapon mount for the controller, you might need to add something between controller and mount to add extra friction so that the…
Wydruk około 7,31 €–8,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kann einfach und schnell gedruckt werden und werten den Controller optisch auf. Die Knopf liegt gut in der Hand. DJControl Inpulse 200 Serie habe ich leider nicht, würde mich um eine Rückmeldung vom anbringen freuen und natülich auch noch…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Hello, Today I have Buzz Quiz world controller stands for you. The controllers fit nicely into the stand. There is a USB port on the back. The model is made for both color printing and printing in individual colors. Good luck with the…
Wydruk około 8,83 €–10,79 € nettoWstępna wycena jednego wariantu
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
Wydruk około 4,10 €–5,02 € nettoWstępna wycena jednego wariantu
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Bi-Directional, Rotating Digital Controller Here we have a 3D-Printed Bi-Direction/1-Axis Disc Controller I made for my Arcade Prototype Controller . I've only used it for Stage/Unit select in games so far, but it also could be used in 2D…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
＜概要＞ PS5の純正DualSense 充電スタンド(CFI-ZDS1J)用の収納ケースです。 コントローラーを２個収納出来ます。 収納したまま充電も出来ます。 ＜組み立て方＞ body、top、baseの３パーツ構成です。 滑り止めが必要な方向けに、baseの裏面には滑り止めクッションを貼る場所が４箇所あります。 クッション穴は3M社の8×2mmのクッション「CS-102」に合う形状になっています。 STEP1…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach uni tripod.
Wydruk około 2,45 €–2,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An MQTT-based, Home Assistant integrated GPIO control system for controlling legos. The Brickmaster RC supports one or two relays for 9v output, good for driving Lego motors or using as a replacement for a battery box. Can be used with my…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
These are Losmandy Gemini controller holders for non-Losmandy mounts or tripods.
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
Xbox Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
I've tested this design with PS5 controllers, but it should work with many different controllers. If your console controllers fit, please let me know what you have so that I may update the model listing. 😃 This model prints on its side…
Simple scan of a ps5 controller I took so I could model some stuff. Thought others might find it useful.
PS5 Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
*The file was exported in inches. If it shows up tiny in your slicer, scale it up 25.4x I bought two used xbox controllers that didn't have the battery covers on them, and none of the designs I found online fit very well, so I went ahead…
Designed for Xbox Series X and S Controllers. I think it's compatible other Xbox controllers except those that use a battery pack. Note: The Xbox logo may require sanding to get it in place. Or you can paint the logo hole.
Inspired by agepbiz's Xbox Minimalist Controller Stand(https://www.printables.com/model/449970-minimalistic-xbox-controller-stand), and not being able to find one for the PS5, I decided to learn some new skills and create my own. I have…
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Stable stand for Microsoft Xbox One/Series controller.
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…
Rack and pinion steering for your xbox controller. 100 degrees of rotation. Enjoy finer control in racing games. Get the remastered version: https://www.printables.com/model/271330-xbox-one-mini-wheel-evolution What you need: 608 bearing,…
A 3D stand divided into two parts: the base and the tower. Specifically designed for controllers and headphones, the tower features arms with adjustable angles at 45, 66, and 90 degrees. This allows you to customize the stand for placing…
PS5 Dualsense Controller Stand
Rack and pinion steering for your PS5 controller. 100 degrees of rotation. Get finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying…
Nice stand for game controllers. This stand is suited for xbox one and series x/s and ps5 controllers. It is inspired on Darth Vader from starwars. If you don't own a 3d printer or just want to buy it. You can buy it on my shop ←
Simple, easy and quick to print (around a hour) mount. Not a perfect design, might revisit later but works fine. Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Resolution: 0.2…
Rack and pinion steering for your xbox series X [S] controller. 100 degrees of rotation. Enjoy finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you…
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
Thing files for Browns PlayStation Xbox Switch Controller Stand by brown1985 - Thingiverse
New version here: https://www.printables.com/model/1840378-ps5-dualsense-controller-phone-mount-bigger-strong This a remix of https://www.printables.com/model/148212-dualsense-simple-phonemount I wanted to be adjustable according to the…
TEST FIT TEST FIT TEST FIT Head here for the full Xbox design PS4 Version Available Here PS5 Version Available Here Switch Version Available Here Print and test controller clips to make sure they fit. 4 files provided here: 1: STEP file…
Universal Controller Stand. Smooth, flexible, and perfect for gamers.
We are currently in the final stretch of development for the final version of the Polybar System. If you have purchased a solderless kit or a DIY kit, please download the Beta 2 files located on our Discord server . 3D Printable Music…
This is a remix of DiilanDH's controller holder, but the system won't let me put it in. I improved the fit to the console and the controller so that it doesn't get knocked off so easily. I also have a version with the PS logo Check out my…
You inspired me to Add the Playstation brand. THX @Hazzardness https://www.printables.com/de/@Hazzardness_250785
This model will require some supports between the legs, under the hands, zipper and the head as well. Add plenty of infill to keep it sturdy! I recommend getting the bottom plate for stability, but I have not been able to test this print…
100% inspired by the Switch Pro controller by npiegdon ( https://www.thingiverse.com/thing:3030629 ). Thanks to davec54's 3D scan, I have improved upon the original version of this stand. Now the thing fits like a glove. It's quite a bit…
This is a remix of https://www.printables.com/fr/model/157076-playstation-5-controller-mini-wheel from @pixel2_237985. Presentation The original wheel with two circles was not confortable to me, so I designed a real round wheel to be more…
Stuff you need to buy: -M3x20mm screws (17 count) -M3x20mm nuts (17 count) (Optional but suggested) -Kailh low profile switches (9 count) -USB encoder OR Arduino pro micro OR equivalent usb board that can act as a game controller -USB…
![Xbox series X [S] controller mini wheel](https://media.printables.com/media/prints/157078/images/1468543_a9941f77-2739-4f1c-a938-4d727942ca80/large_display_xs_wheel_fs_start_157078.jpg)
