Wyniki wyszukiwania: crimper

Sortowanie

119 modeli

P
Printableseds_3d_shop

Eds French Cleat/wallmount Pliers and Crimper Holder/Organizer (for 10, 12 ,15, 16mm tubes and 15, 18mm FC bars, inkl .STEP)!

UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…

Pobrania
1055
Polubienia
129
Ocena
4,8
P
Printablesmorp

Ikea Skadis Ratcheting Pliers/Crimpers holder

This is a rework of some similar models on here to be easier to print and more universally fit larger and different branded ratcheting pliers. Has a recess for the ratcheting latch and a lip on the front to keep pliers in place. Tested…

Pobrania
764
Polubienia
135
Ocena
4,97
P
PrintablesMikhail

French Cleat Crimper Holder

Simple holder that allows easy storage of crimpers, pliers, and other similar tools. Print as many as you need and combine with 3/8" wood dowels. Included step file if you need to adjust the holes or cleat size.

Pobrania
711
Polubienia
193
Ocena
5
P
Printablesforsaken_candy

Multiboard/HSW crimper mount

Crimper holder for Honeycomb Storage Wall and Multiboard. Should work with IWISS SN-28B, SN-48B, or similar crimpers. I wanted a mount that held the crimper while open, to avoid having to close it every time. Settings Print upright…

Pobrania
615
Polubienia
94
Ocena
4,73
P
PrintablesPeterthinks

Mini Dupont crimper

This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…

Pobrania
595
Polubienia
78
Ocena
4,25
P
PrintablesMiguel Camba

Gridfinity wire stripper/crimper/cutter tool holder

A 5x3 gridfinity tray (3 units deep) extruded to fit a very popular wire stripper / crimper / cutter model sold under many different brands with minimal variations. This model, and other very very similar ones, are sold under several…

Pobrania
586
Polubienia
100
Ocena
4,33
P
PrintablesDąbal

12 Ga shotshell Roll Crimper

We have the option either use 2 mm steel pins, which need to be hammered in, or ream the holes to 2.5 mm and screw in M3. If you want a nicer finish you can remove the thread from the screws 6 x M3 8 mm can be longer at most they will…

Pobrania
545
Polubienia
37
Ocena
5
P
Printablesmikeneron

Gridfinity Network Cable Crimper Holder

Holder for the Klein Ratcheting Cable Crimper (pass-thru) / Stripper / Cutter. Model is VDV226-110. This works with the Gridfinity system.

Pobrania
514
Polubienia
109
Ocena
4,86
P
PrintablesMorbier

Gridfinity for HSC8 6-4A crimper plier Kit

This set of two gridfinity is perfect to store you crimping tool kit. The first bin is for the HSC8 plier. It's 3x5x4U The second bin is to store the ferrules, it's 3x5x5U. See my other gridfinity bins at…

Pobrania
502
Polubienia
266
Ocena
5
P
PrintablesIguanahotsauce

SN-48B Crimper Holder HSW

Holder for a SN-48B crimper tool that works with the honeycomb storage wall

Pobrania
495
Polubienia
61
Ocena
5
P
PrintablesBeamsjr

Gridfinity Crimper Stand

Stand for your crimper tools.

Pobrania
485
Polubienia
99
Ocena
4
P
PrintablesPeteD

Honeycomb Storage Crimper Plier Rack

This is a rack to hold connection crimpers and their dies. Note that the left-most slot is narrower for simple, die-less, crimper (or wire striper). Print using PLA and tree support. Arrange on bed with the top side of the rack to the bed.

Pobrania
346
Polubienia
54
Ocena
4,75
P
PrintablesPeterthinks

Dupont Crimper Guillotine

Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…

Pobrania
313
Polubienia
43
Ocena
2
P
PrintablesReitangle

Ferrule Crimper holder for IKEA SKADIS / UPPSPEL

Ferrule crimping plier holder for IKEA SKADIS or UPPSPEL pegboards. I think it will fit and hold most generic no-brand ferrule crimpers. I printed in Black PLA with 35% infill on a Bambu P1S, (tree) supports on, came out plenty strong.…

Pobrania
299
Polubienia
39
Ocena
5
P
PrintablesIguanahotsauce

IWS-3220M Crimper Holder HSW

Holder for a IWS-3220M crimper tool that works with the honeycomb storage wall

Pobrania
285
Polubienia
56
Ocena
4,5
P
PrintablesPrinto Matic

Paper Crimper (50mm Tall)

Elevate your crafting with our 3D printed paper crimper, expertly designed for both functionality and aesthetics. Standing at 50mm tall, this tool is crafted from durable ABS plastic, ensuring longevity and resilience during repeated use.…

Pobrania
254
Polubienia
46
Ocena
3,5
P
Printablesmilspecmoehring

20mm Vial Crimper

Crimper for 20mm Vials Reccommended Settings: 0.1mm Layer Height 5+ Perimeters If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…

Pobrania
251
Polubienia
20
Ocena
0
P
PrintablesRapalax

HSW Ferrule Crimper holder

Pretty self-explanatory - Mine is the HSC8 6-4A budget special, but seems to work for many others. Originally taken from https://www.thingiverse.com/thing:5535836 and adapted for HSW.

Pobrania
251
Polubienia
37
Ocena
4,83
P
PrintablesBeche Estudio

Hsw storage crimper rack

Took inspiration by @PeteD crimper rack and modified it a bit to be able to print it on my Sovol Zero bed (150mm). Printed it in PETG I had lying around but any material should do. Print config: -3 walls, 3 top/bottom -0% infill The…

Pobrania
171
Polubienia
21
Ocena
5
P
Printablessamywamy10

Gridfinity RJ45 Crimper and Wire Stripper holder 5x2

A Gridfinity 5x2 holder for an RJ45 crimper and a wire stripper. Wanted to be able to store these in my drawer without taking up much height. My RJ45 crimper default position is open, so to put it in I need to close it, which the…

Pobrania
169
Polubienia
43
Ocena
0
P
Printablessphink

Gridfinity 2x5x4 holder for network crimper plier (rj45/rj11)

Gridfinity holder for network crimper plier, made for a crimper with 19cm length, 6cm width at handle. 2x5x4 no magnets.

Pobrania
168
Polubienia
29
Ocena
5
P
PrintablesTimATX

Ferrule and Crimper case

I increased the height and added a bin to hold my crimper. I also tweaked the lid height a bit. Great simple box to house a tool that sees rare usage.

Pobrania
166
Polubienia
49
Ocena
5
P
PrintablesTheOneAndOnly

Ferrule Crimper Gridfinity Tray

I modified this so my icrimp crimpers handle would fit. It should be a bit wider than the original.

Pobrania
162
Polubienia
37
Ocena
5
P
Printableschakkuchan

Gridfinity Sopoby Ferrule Crimper Kit

Bought a kit off amazon and wanted a custom setup, used a 5x5 square and made two 5x2.5 sections. https://www.amazon.com/gp/product/B07PJK2VNT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Made one version to hold this speedloader…

Pobrania
154
Polubienia
23
Ocena
0
P
PrintablesShabubu

Dupont and JST Crimper Multiboard Holder

Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…

Pobrania
142
Polubienia
20
Ocena
5
P
Printablesmrsam92

LY-03B Crimper Holder HSW

Holder for a LY-03B crimper tool that works with the honeycomb storage wall

Pobrania
136
Polubienia
14
Ocena
0
P
Printablesmikeeg

Irrigation tube crimper

"Crimper" to fold 1/2" poly irrigation tubing to seal the end. Prints in 22 minutes! 3 g of filament at 30% infill, 4walls. Print with PETG for good outdoor quality.

Pobrania
130
Polubienia
28
Ocena
4,5
P
Printablesmilspecmoehring

20mm Vial Crimper Keychain Edition

Crimper for 20mm Vials with Attachment Hole Reccommended Settings: 0.1mm Layer Height 5+ Perimeters Recommended Print Orientation as shown If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly…

Pobrania
129
Polubienia
25
Ocena
5
P
PrintablesNightLonk

Gridfinity: Klein 34056 Hex Ferrule Crimper

Here's a Gridfinity 2x5 holder for the Klein Tools 34056 Hex Ferrule Crimper. I've also included a 2x5 5 bin Gridfinity for either standalone use or for use with the 5x4 Gridfinity Storage Box by Pred (…

Pobrania
123
Polubienia
61
Ocena
5
P
PrintablesBpendragon

Micromatch IDC crimper Adapter

I wanted to make a quick disconnect cable for my MK4 in the original enclosure, but since the ribbon cable comes pre-split from Prusa making my own seemed like a good idea with some more standard IDC connectors at the midpoint. Micromatch…

Pobrania
117
Polubienia
9
Ocena
4,5
P
PrintablesRan Lottem

HSW Wire Crimper Holder

The original model is used for the other tools, only the yellow dupont crimper is using this remix

Pobrania
108
Polubienia
12
Ocena
0
P
Printablesxander.snyder

IWS-3220M Crimper - Multiboard mount

@Iguanahotsauce made a awesomely simple mount for the Iwiss IWS-3220M crimper for the Honeycomb Storage Wall (HSW), unfortunately I went with Multiboard over HSW. So I removed the HSW mount and added a Multiboard push fit mount, this does…

Pobrania
107
Polubienia
22
Ocena
5
P
PrintablesLmasek

Crimper Die/jaws Case Proskit

Crimper Die/jaws Case Proskit to compleat a case you will need 2 x M3 24-25mm nut.

Pobrania
100
Polubienia
20
Ocena
5
P
Printablestechnojunkie

Gridfinity tray for AFM8 crimper and dies

A tray for a Daniels Manufacturing AFM8 crimper and a few dies. I modeled it for an M22520/2-01 tool, but it will probably work for other tools with similar sized frame.

Pobrania
97
Polubienia
8
Ocena
0
P
PrintablesInhibit

Pegboard Stripper Crimper Holder

What you have here is a Pegboard Wire Stripper holder perfect for the little crimper/strippers that come bundled with crimp-on wire ends. See the picture for exact type. Customized version of http://www.thingiverse.com/thing:537516…

Pobrania
92
Polubienia
9
Ocena
0
P
PrintablesGreg Zapf

Crimper Die Case (print in place, easier latches)

My printer lacks the ideal tolerances for printing the original file ( https://www.thingiverse.com/thing:1544407 ) with moving latches... after printing and breaking a couple, I realized I could narrow the latches with very little effort.…

Pobrania
84
Polubienia
19
Ocena
5
P
Printablesrhinodavid

IWISS Crimpers SN-2549 Gridfinity Case

Created with the Fusion Gridfinity Generator plugin.

Pobrania
83
Polubienia
19
Ocena
0

Gridfinity Titan Ratcheting Wire Crimper Tool holder

6x3 gridfinity wire crimper holder for the Titan 11477 ratcheting wire crimper

Pobrania
82
Polubienia
10
Ocena
0
P
PrintablesPoopyPops
Pobrania
82
Polubienia
11
Ocena
0
P
Printablesdoragasu

Stackable Gridfinity Holder for "ZoeRax" RJ45/RJ11 Cable Crimper

The crimper can be purchased on Aliexpress: https://aliexpress.com/item/1005006474712295.html The model has a hole for the crimping tool, and another small hole for the spare blades.

Pobrania
81
Polubienia
15
Ocena
4
P
PrintablesParadox

Wire crimper Skadis wallmount holder

Simple holder for mounting various wire crimpers on a skadis board. I'm currently using it to hold up a pair of Klein ratcheting crimps, a pair of no-name ferrule crimps, an iwiss deutsch connector crimp, and more This project makes use…

Pobrania
81
Polubienia
12
Ocena
5
P
Printablesbenwittbrodt

Stent Crimper

This is a stent crimper for initial setup of stents intended for insertion into the human body. Category: Hand Tools

Pobrania
77
Polubienia
3
Ocena
0
P
Printables1967kevin

Wire Stripper/Crimper Mount

I couldn't find a suitable wall mount for my wire stripper / crimper, so designed one of my own. No supports needed if printed standing up as shown in the photo. I have also included a test piece that you can print in a couple of minutes…

Pobrania
72
Polubienia
13
Ocena
5
P
Printablesjayjay

Gridfinity SN-28b Crimper

There are many different variants of crimper handle, so make sure it's the same one before you print. I used a 2mm offset for the provided STL, but I think it can go lower to 1mm. Provided f3d file with the cutout, you can check to see if…

Pobrania
64
Polubienia
17
Ocena
0
P
PrintablesLoogle

TE 160783-7 Gaggia boiler terminal Crimper HS Jaws

Description Crimper jaws and spacers to help with crimping the TE 160783-7 Gaggia boiler terminal connectors. While the wire connection can be crimped with a standard open-barrel terminal crimper such as the Engineer PA-20 in multiple…

Pobrania
62
Polubienia
20
Ocena
0
P
PrintablesAustin

paper crimper no screws needed!

This is a paper crimper and it works pretty well so i suggest you use it and it isn’t big at all!

Pobrania
59
Polubienia
7
Ocena
0
P
Printablesperrygilchrist

DMC AF8 Crimper - Gridfinity Tool Holder

I wanted a gridfinity holder for my Daniels AF8 Crimping tool and an extra turret. The long slot is just for some extra tooling if you have it.

Pobrania
58
Polubienia
9
Ocena
0

Coin Roll Crimper for MKD (Macedonian Denars)

This is my Coin Roll Crimper design for MKD (Macedonian Denars) coins. The design is made in SolidWorks and can be adjusted to fit any type of coins, if you are interested feel free to write me and I will give you the original SolidWorks…

Pobrania
54
Polubienia
10
Ocena
0
P
Printableswhoppingpochard

Pegboard Crimper Holder

I've been accumulating crimpers, and needed a handy place to keep them at the ready. This lets me mount them securely to either the wall using #10 screws, or to standard pegboard using my pegboard rivets.

Pobrania
52
Polubienia
6
Ocena
0
P
Printablesn.leinad

Toolcraft PZ-500 Crimper - Die Holder (Expansion)

Bought a couple more crimp dies (or bits) for my Toolcraft PZ-500 crimper, a a tool that can crimp most electrical terminals or connectors. However, the original storage box has limited place for the dies, so I made my own interior with…

Pobrania
50
Polubienia
10
Ocena
0
P
PrintablesRen

Pro'sKit crimpers die case

There already is a similar case, I just needed a smaller one. I found the other one non-remixable (poor geometry), so I took inspiration and designed a new one for my set of dies. It's print in place, you need nothing else to complete it.…

Pobrania
50
Polubienia
6
Ocena
0
P
Printablesstythys

1ml Vial Crimper

I take weekly injections from 1ml vials and noticed the medicine evaporates if the cap is not clamped down. I found one person made a clamp but it was for 20mm bottles, so I took the design and resized it to meet my needs.

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesCraig Kergald

Gridfinity storage for JST crimpers

Gridfinity storage for JST crimpers

Pobrania
48
Polubienia
11
Ocena
0
P
PrintablesNukepenguin

Klein Wire Crimper Skadis Mount - No Hardware Required

The original model posted by @Paradox is great, but it requires the use of M2 screws and nuts. I wanted a version of this tool holder that didn't require any additional hardware to use. I added two hooks on the back that will fit onto the…

Pobrania
46
Polubienia
5
Ocena
4,5
P
PrintablesKyle

HS Series Crimper Pegboard Holder with seperate die holder (Fully parametric in OpenSCAD!)

Crimpers are hard to mount to a pegboard. They're big, weirdly shaped and have no obvious mounting holes. Additionally, you often get interchangeable dies which are easy to misplace and don't have good ways to organize. There are two…

Pobrania
44
Polubienia
9
Ocena
0
P
PrintablesPranthan

Iwiss Crimper Jaw Holder

This is a stand for organizing the various jaws that come with the iWiss crimping tool linked below. https://a.co/d/eFWPzec

Pobrania
40
Polubienia
5
Ocena
5
P
PrintablesJanisz112

SN58B Crimper Gridfinity

A simple 5Ux2U Gridfinity Insert for the SN58B crimping tool (by Lion Rage). Probably compatible with most SN-series tools (ex. SN-28B, SN-48B). Designed in 2 variants: Low profile 3U in height (not stackable) Normal profile 4U in height…

Pobrania
38
Polubienia
11
Ocena
0
P
PrintablesShabubu

Dupont and JST Crimper Pegboard Holder

Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/1OadgBVidm6-dupont-crimping-tool-pegboard-holder Print instructions…

Pobrania
35
Polubienia
8
Ocena
0
P
PrintablesSunsetpeople

Gridfinity Box 5x2 RJ45 WorkNet Crimper

Коробка Gridfinity 5x2 для сетевого обжимного инструмента RJ45. Хотелось хранить их в ящике,как и другие обжимные клещи.

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesCotyPrints

Doyle Wire Crimpers

This imports into the slicer weirdly, just convert to MM or convert to Inches and it should fix itself within the slicer. Feel free to remix!

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesJace

Stackable 2x4 Gridfinity Bin for Engineer PA-24 Crimpers

The Gridfinity bug is running rampant in my shop, and this is just another bin to help me organize my tools. It fits the Engineer PA-24 wire Crimpers. Should print easily on almost any printer, and it can accept 6x2 magnets on the bottom.…

Pobrania
28
Polubienia
10
Ocena
0
P
PrintablesGFS

Magnetic frame for storing crimper jaws. 6x1.5 or 5x2.0 magnets, Magazine for 6 or 8 pieces.

A frame for 8 jaws for a crimping tool. A long 2.5 mm Allen key slides in from the side. The frame fits snugly into the case that usually comes with the crimping tool. The jaws fit snugly. Loose jaws are held in place by magnets. I bought…

Pobrania
28
Polubienia
13
Ocena
0
P
Printablesash

Grindfinity Bin 2x2 for 3 Crimpers

Grindfinity Bin 2x2 for 3 Crimpers

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesEngiNerded

Ratcheting Wire Crimpers Gridfinity Tray

Ratcheting Wire Crimpers Gridfinity Tray, Amazon link: haisstronica Crimping Tool For Heat Shrink Connectors-AWG 22-10 Ratchet Wire Terminal Crimper-Ratcheting Crimper Tools-Available For Insulated Nylon Connectors and Electrical Wire…

Pobrania
24
Polubienia
6
Ocena
0
P
Printablesdenver

SN-58B Crimper Case

Case for SN-58B Crimper and 6 replaceable sponges Кейс для кримпера SN-58B и 6 сменных губок

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesMr Meowz

"ZoeRax" RJ45/RJ11 Cable Crimper Case

A simple case for the ZoeRax network cable crimper

Pobrania
22
Polubienia
6
Ocena
0
P
PrintablesMGyula

Crimper pliers box

I have printed from PETG. The wall is thin to fast it print. If your pliers has different dimensions or want thicker walls you can change the Fusion 360 model.

Pobrania
22
Polubienia
4
Ocena
0
P
PrintablesMonkichi57

Crimper Die Adapter for Paladin Tools Crimp-All Crimper (or other similar size crimpers with replaceable dies)

I had purchased a set of Dupont crimping dies (https://www.amazon.com/dp/B0774V8HXZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2) for my Paladin Tool Crimp-all and didn't realize I bought one that was too small for it. I didn't want to…

Pobrania
20
Polubienia
3
Ocena
0
P
Printablesmoosepilemini

Simple wall mount wire strippers / crimpers holder

super simple wall mount hanger for strippers . quick print, 36 mins for me

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesAmanda

KF CPTEC Solar Connector Crimper Tool Holder

A quick remix of @Shabubu's 'Dupont and JST Crimper Multiboard Holder' to make it a bit wider to fit larger crimpers

Pobrania
19
Polubienia
1
Ocena
0
P
Printablesbelpyro

Crimper Holder (Skadis)

Printed with 0.6 nozzle diameter PLA. Settings: 4 walls, 15% infill, 3 top-bottom layers No supports needed. For second part you should clone and mirror by X-axis the original. You can use a standard 16 mm tube from DIY shop (it uses as…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesNot2Envy

Amazon HKS Wire crimpers Gridfinity

created a crimp holder for gridfinity system for the amazon HKS Crimper. i used PLA+ 05% infill and Lighting infill.

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesSuperMatt

Vial capper / crimper holder

This is a holder for a ThermoFisher 12mm vial crimper. Category: Tool Holders & Boxes

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesKarel

Climp for RJ45 crimper model TV37

Crimper model: TV37 PLA or PETG, 0.2mm

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesAESolutions

Wirefy Crimper Pegboard Holder

This is a pegboard holder for the Wirefy quick change jaw terminal crimpers, sized for 1" spacing, ¼" hole pegboard. Pegboard mounting uses 6mm, screw-in/out automotive rivets, which I've found to be easy enough to install and remove with…

Pobrania
16
Polubienia
6
Ocena
0
P
Printablesarroyobass

Klein Pass Thru RJ 45 Cable Crimper Gridfinity

This model is a Gridfinity compatible organizer for the Klein VDV226-005VDV226-005 Compact Pass-Thru Modular Crimper as well as a mini cable stripper tool. This is great for organizing your network cable tools all in one convenient place!

Pobrania
16
Polubienia
2
Ocena
0
P
Printablesarmaguedes

Triple-slot Gridfinity holder for Someline crimpers (ferrule, Dupont, JST-XH)

This holder fits 2 types of Someline crimping pliers: 2 slots for the Someline 10A4 and/or 10A6 ferrule crimpers (4 jaws and 6 jaws, respectively). 1 slot for the Someline 2350M terminal crimper for Dupont / NSR connectors and JST-XH…

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesFlorent Conty

Crimper Box for Terminal assortment Box 205x105mm

This crimper had no box and i don't wanted to run after it. That why i did this box which is fixed on the Assortment box (zbs. aliexpress). it is done for 205x105mm assortement box.

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesChuffine

Dewalt AFM8 Crimper Insert

This print is designed to fit in this DEWALT box . The crimp inserts should just touch the lid. If it's a little loose, a touch of hot glue will keep it from wiggling. You could also laser cut this out of two pieces of 4mm acrylic, grab…

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesAlvikru

Case with fixation for Crimper Die/jaws

This is a Case for Crimper Die/jaws with content fixation. Suitable for Crimper Die/jaws with holes without cutouts. The sizes of different Die/jaws manufacturers are slightly different. Make sure that your size fits. The distance between…

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesPatchwork

Gridfinity Cenby Crimpers Holder

Gridfinity holder for Cenby wire crimpers. I'm sure that it will fit other crimpers. I split it into 2 parts so that I could fit them into the ender3 bed. I've included the freecad files, in case you want to edit it.

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesMadebyaCat
Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesTrekking

Crimping Die Box for short dies for Ideal Crimpmaster and similar crimpers

Remixed Maksym's box to have two short rows to hold the dies that I use with the Ideal Crimpmaster. Box will handle short dies from most manufacturers as well as most short clone dies. Used 4-40x 1-1/4 inch screws. Used PETG for the box…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesAndrew Lochow

DMC AF8 Crimper Gridfinity Organizer with Turret storage

A gridfinity holder for the AMP AF8 crimping tool, and 6 spots for turret heads. I put the most common ones up there.

Pobrania
10
Polubienia
4
Ocena
0

SN-58B crimper tool wall holder

I still like to use good old-fashioned boards as tool walls rather than the Skadis system people like these days, so I need lots of custom tool holders mounted by plain wood screws. This is the one I designed for the SN-58B crimping tool…

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesCarter

openGrid crimper mount

Should work with IWISS SN-28B, SN-48B, or similar crimpers. Modified for usage with openGrid.

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesMyself

Crimp positioner holder for Astro/DMC/Iwiss M22520 indent crimper

The IWISS HD-2612D and similar crimpers have a positioner that screws into the back to hold the contact at a specified depth during the crimp operation. This positioner makes the whole unit too thick to fit in most toolbox drawers.…

Pobrania
9
Polubienia
2
Ocena
0
P
Printables8shooter

Pegboard Mount System Wire Crimpers

This is a mount for some generic wire crimpers. It is based on the "Pegboard Tool Mount System" by eric-anastas. You can get the proper hooks for your pegboard from his design. The opening is 55mm x 15mm. Category: 3D Printing

Pobrania
8
Polubienia
4
Ocena
0
P
PrintablesBulletDrop

IKEA SKADIS Ali Express crimper and wirestripper

IKEA SKADIS Ali Express crimper and wirestripper made to use less space This is the crimping tool

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesReem88

Icon 7" Wire Stripper Cutter Crimper Gridfinity

Harbor Freight Icon 7" Wire Stripper, Cutter, Crimper Gridfinity Bin. 2x5

Pobrania
7
Polubienia
5
Ocena
0
P
Printableshedkvist

Gridfinity for RJ-45 RJ-11 RJ-12 Crimper tool

Gridfinity 6x3x6u for RJ-45 RJ-11 RJ-12 Crimper tool. Could not find a gridfinity bin for my specific tool so I made one. This tool model seems to be commonly referred to as HT-2008A, HT-2008AR, HT-2008R, HT2008A, HT2008AR or HT2008R.

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesDeviantBench

Universal Quick-Change Crimper Die Organizer / Rack (Wall Control / Pegboard)

Universal Quick-Change Crimper Die Organizer / Rack (Wall Control & Pegboard) Designed to hold standard quick-change crimp die pairs for ratcheting crimpers. Modeled directly around the Haisstronica set, but fits standard universal…

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesR&D

Gridfinity RJ45 crimper holder 5x2

RJ45 crimp tool holder for gridfinity system. I wanted a box for it to store in.. I made it in fusion, with the gridfinity bin add-on.

Pobrania
2
Polubienia
2
Ocena
0
P
PrintablesRain And Storm

Hydraulic Crimper Compression Die Holder (bracket, clip, link)

No need to use electrical tape or zip ties to prevent dies from rattling or getting lost — this simple bracket will keep them paired. Features a hole in the middle for convenient hanging or stacking. Works for any pair of round U-type…

Pobrania
0
Polubienia
0
Ocena
0
P
PrintablesThatclimber

Climbing holds (crimperx2 jugs x3)

I used tinkercad to model some simple climbing holds. Unfortunately the banana jug is only 7 inches due to miss measurement on my end and so is the crimper with that banana jug. This project was made in the span of a few hours so…

Pobrania
0
Polubienia
1
Ocena
0
P
Printables

Gridfinity Cenby Crimpers Holder

Gridfinity holder for Cenby wire crimpers. I'm sure that it will fit other crimpers. I split it into 2 parts so that I could fit them into the ender3 bed. I've included the freecad files, in case you want to edit it.

P
Printables

Gridfinity Box 5x2 RJ45 WorkNet Crimper

Коробка Gridfinity 5x2 для сетевого обжимного инструмента RJ45. Хотелось хранить их в ящике,как и другие обжимные клещи.

P
Printables

Icon 7" Wire Stripper Cutter Crimper Gridfinity

Harbor Freight Icon 7" Wire Stripper, Cutter, Crimper Gridfinity Bin. 2x5

P
Printables

Hsw storage crimper rack

Took inspiration by @PeteD crimper rack and modified it a bit to be able to print it on my Sovol Zero bed (150mm). Printed it in PETG I had lying around but any material should do. Print config: -3 walls, 3 top/bottom -0% infill The…

P
Printables

SN58B Crimper Gridfinity

A simple 5Ux2U Gridfinity Insert for the SN58B crimping tool (by Lion Rage). Probably compatible with most SN-series tools (ex. SN-28B, SN-48B). Designed in 2 variants: Low profile 3U in height (not stackable) Normal profile 4U in height…