Wyniki wyszukiwania: cycl

Sortowanie

5076 modeli

P
Printablesecoiras

Print-in-Place Kaleidocycle

A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And no need for supports either. Enjoy! Print instructions The models shown in the photos were printed in PLA.…

Pobrania
9779
Polubienia
1915
Ocena
4,87
P
PrintablesMichael

Prusament upcycle Frisbee

Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…

Pobrania
5443
Polubienia
2480
Ocena
4,7
P
Printablesboomke

motorcycle helmet holder

Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…

Pobrania
4881
Polubienia
578
Ocena
5

PET Bottle Self-Watering Attachment - PET Bottle Upcycling

— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…

Pobrania
2712
Polubienia
482
Ocena
4,85
P
PrintablesMolodos

Parametric car/motorcycle license plate keychain (Nummernschild/Kennzeichen)

A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…

Pobrania
2532
Polubienia
454
Ocena
5
P
Printablesxopn

Bicycle chain wear indicator

A bicycle chain gets longer, when it is worn. This tool helps detecting when is stretched by 0.5% and 1% respectively. Those are two key points to detect when a chain needs changing. 0% is the stretch of a new chain obviously Below 0.5% a…

Pobrania
2298
Polubienia
391
Ocena
4,78
P
Printableszbieraj

Bicycle Tire Lever

This is a bicycle tire lever created by Piotr Zbierajewski. Besides being a normal lever it has also 10 mm wrench for those few tensioners which still can be found in the bikes, as well as it has a spoke hook. It has been created with…

Pobrania
2218
Polubienia
237
Ocena
5
P
PrintablesBostra

Motorcycle helmet hook.

Tisk je velmi jednoduchý. Pevnost je dostatečná z PLA, ale můžete klidně použít PETG. Tisk vrstvy 0,2-0,28. Tyto dva soubory jsou rozdílné pouze v otvorech na vruty, kde jeden je na plochou hlavu vrutu a druhý na zkosenou hlavu vrutu.

Pobrania
1902
Polubienia
295
Ocena
4,94
P
Printableswollel

CHAIN LUBE Spray adapter Bicycle/Motorbike

Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA

Pobrania
1899
Polubienia
237
Ocena
4,79
P
PrintablesTony

Bicycle playing cards box

Update: Added "no design" version of the box A simple box for storing Bicycle playing cards. My print settings: Resolution: 0.2mm Infill: 20% No supports needed I printed this using Devil Design Black PETG (I also attached the gcode…

Pobrania
1886
Polubienia
370
Ocena
4,67
P
Printablestrendspoke

Cargo Cage - Bicycle Fork

Up to 3 Adapter to mount it properly. (I use cork tape to keep it perfect in place.) You can use cable ties or 15mm hook-and-loop band. CargoCageForkAdapter.stl is for a 43mm fork. Let me now if you need a different diameter. Update:…

Pobrania
1221
Polubienia
345
Ocena
5
P
PrintablesTmpx64

Simple Mudguard - Bike fender - Easy print - Road Cycling - Protective - Protection gear

Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…

Pobrania
1164
Polubienia
221
Ocena
5
P
PrintablesVize3Dtisku

50+ Keychains of moped, scooter, veteran and motorcycle

Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…

Pobrania
1151
Polubienia
176
Ocena
4,6

Toolbox for bicycle

This design is made for my bike but should fit most bikes. I used a tool like this to get the shape of the down tube. There is also a Fusion360 file and a .stp file so you can edit it to fit your seat tube and down tube perfectly. The box…

Pobrania
1146
Polubienia
504
Ocena
4,88
P
PrintablesPrusament

PLA Recycled Self-watering Pot

This is our self-watering pot for you - in typical Prusa-style and printed from PLA Recycled . The flower pot is ideal to grow seeds and herbs beneficial to your health, or you can use it as a small pot for your home flowers. You will…

Pobrania
994
Polubienia
488
Ocena
4,91
P
PrintablesTransmitt0r

Airtag bicycle hidden saddle holder

Hidden Airtag Saddle Holder This is a handy holder that keeps your airtag hidden and safely attached to your bicycle. This is not a clip-on to make it harder to remove, instead the two halves are held together with four screws. The bottom…

Pobrania
878
Polubienia
196
Ocena
5
P
Printableschrism

Bicycle / Bike Repair / Assembly Stand

Since commercally available bicycle repair stands are quite expensive, I decided to design one on my own. This assembly stand is supposed to hold your bike in a comfortable position, while you can work on it. I used 53mm pipes and did a…

Pobrania
789
Polubienia
190
Ocena
5
P
Printablesmehow

Bicycle ass saver in 1h

Featuring: 3 layers and 10g of your favorite filament 2 holes to quickly mount it under the seat 21.7 x 9 cm (does not extend under the seat like the commercially available ass savers) If you print it on a Prusa Mini/Mini+ turn off the…

Pobrania
610
Polubienia
160
Ocena
4,86

Toolbox for bicycle

This toolbox is made for the cannondale topstone which has an extra bolt for something like that. If you are the one second person on this earth which has a 3D printer the need for a toolbox for your bicycle a cannondale topstone alloy…

Pobrania
600
Polubienia
226
Ocena
5
P
Printables3D KIMBA

Spool Wind Spinner: Another Way to Recycle a Filament Spool

Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…

Pobrania
589
Polubienia
294
Ocena
5
P
PrintablesAviv Halevi

Herringbone Eccentric cycloidal fidget model

This model is based on the eccentric cycloidal drive. for this model you would need: 4x 608 bearings(the same ones that are in fidget spinners and skate board wheels). 2x m3 screws that are no more than 30mm long. and all 5 of the printed…

Pobrania
512
Polubienia
151
Ocena
4,53
P
PrintablesJohnM

Roadlok motorcycle disc lock pin carrier

The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…

Pobrania
457
Polubienia
15
Ocena
5
P
Printablespatrickzell

Bicycle gloves hanger clamp / Fahrradhandschuhaufhänger

Simple clip with which e.g. cycling gloves or other light textiles can be easily hung up. I use it to store my cycling gloves, balaclavas, etc. with the rest of my cycling clothes and hang them up to dry. Einfache Klammer, mit der z.B.…

Pobrania
392
Polubienia
74
Ocena
4,8
P
PrintablesJernejP.

Motorcycle chain cleaner MK1

So this is the first prototype of my fully 3D printed motorcycle chain cleaner. Brushes and straps are printed in flexible materil (i use basic TPU) for the body i used Prusament PETG. I will upload new iterations as i develop them.

Pobrania
383
Polubienia
142
Ocena
5
P
PrintablesRob

V-Slot Racer - Recycle Your Old Printer Parts!

I designed this for the Toy Cars Competition. Having recently replaced my very slightly worn V-Slot wheels on my 3d printer I'd been looking for a use for the old ones. The car is a simple easy print. 20% Infill and 0.2 mm layers is fine.…

Pobrania
365
Polubienia
305
Ocena
5
P
PrintablesJB

Happy star, bicycle valve cap for dunlop/blitz

Bicycle valve caps are notoriously dull. Not this one. Guaranteed to bring a smile to faces when printed in bright color. For the sharpest pixel effect print using 0.25mm nozzle. However the standard 0.40mm nozzle is fine too. Should fit…

Pobrania
321
Polubienia
70
Ocena
0
P
PrintablesPombay

Muli bicycle (E-bike) battery rain cover / Shimano BT-E8010

Would appreciate your make, a like and/or voting ;-) The wonderful Muli cycle carrier bike (https://muli-cycles.de/de/bikes/motor) has one weak point. When the bike is set out to rain/ wet weather-conditions, water tends to stay in the…

Pobrania
298
Polubienia
10
Ocena
4,5
P
PrintablesLeokaldzik

Bicycle holder for the JBL GO 2 speaker | JBL speaker mount

!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…

Pobrania
251
Polubienia
93
Ocena
4
P
PrintablesTomas Rendek

Bicycle airtag mount under bottle

The holder for the airtag is made of two parts without the need for screwing. Just insert the airtag and slide the parts on top of each other at a 60 degree angle, rotate and snap the latch. After that, just screw it under the bottle…

Pobrania
236
Polubienia
38
Ocena
5
P
Printablespatrickzell

Mount for bicycle backlight under saddle

Mount for a small battery led backlight under your bikes saddle

Pobrania
213
Polubienia
34
Ocena
5

MVDP Cyclist Trophy

Cyclist Trophy created in honor of MVDP's victory today at the Milano-San Remo cycling monument . After an amazing finish, he defeated Tadej Pogačar and Filippo Ganna. Wonderful cycling! The model is going to the printer right now. A…

Pobrania
192
Polubienia
21
Ocena
0
P
Printablescurcuz

Motorcycle Helmet Hanger with keys hook

keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567

Pobrania
182
Polubienia
17
Ocena
5
P
PrintablesBlackFury

No Logo & Thicker Motorcycle Kickstand Extender

This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…

Pobrania
178
Polubienia
16
Ocena
0
P
PrintablesFabrizio

American Touring Motorcycle Twin Cam Timer Cover

Three colors timer cover. The print files has two pauses for filament color change already included. Following the print I sanded it then I applied two layers each of primer for plastic and transparent paint. I made others timer cover in…

Pobrania
150
Polubienia
18
Ocena
0
P
PrintablesAdam Jatkowski

Wigry bicycle tool kit

Narzędziówka pod siodełko do roweru wigry. Drukowane z podporami, najlepiej z jakiegoś filamentu w miarę wytrzymałego i elastycznego, odpornego na niewielkie deformacje, ABS lub ewentualnie PETG. wydruk z PLA nie wytrzymuję wymaganego do…

Pobrania
132
Polubienia
13
Ocena
5
P
PrintablesRaKote

Wall motorcycle stander holder

Print instructions Print Settings ============== Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution : 0.3 Infill: 99% Filament : Devil Design PET Notes: You can use other material if you want Standard for 0.4…

Pobrania
122
Polubienia
41
Ocena
5
P
PrintablesChristian

Lampenhalterung Fahrrad / Bicycle flashlight Mount

English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…

Pobrania
103
Polubienia
46
Ocena
0
P
PrintablesGuillaume3D3

Cyclop - MSLA Homemade 3D Resin Printer ! by G3D

MSLA Cyclop Printer ! If you like my work, you can help me by buying me a coffee, thank you! https://buymeacoffee.com/guillaumehy or paypal.me/guillaumehaouy I should point out that I am a 20 year old student, it takes me a huge amount of…

Pobrania
103
Polubienia
34
Ocena
0

Battery holder for nihola bicycle

This 3D-print will help you mount a battery in the cabin of your Nihola Family cargo bike . Contact me, if you need a kit. See also my programming cable for TSDZ2 . Material needed: 3 x battery-holder.stl. 1 x battery-holder-bottom.stl. 1…

Pobrania
76
Polubienia
9
Ocena
0
P
PrintablesNovemberKou

Mobius Kaleidocycle 7

This is a variation of the Mobius Kaleidocycle. The changes are as follows メビウスカレイドサイクルのバリエーションです。変更点は以下のとおりです。 The distance between the hinges has been reduced to 22 mm by improving the shape. The length of the hinge is 50 mm, whereas…

Pobrania
76
Polubienia
35
Ocena
0
P
PrintablesTwentySix2

Aero Bladed Bicycle Spoke Holder

I have a set of DT swiss wheels which, in addition to having bladed aero spokes, also uses radial pull spokes so the spokes will freely rotate. DT swiss makes a device which works really well, but I prefer to make my own. The handle is 90…

Pobrania
75
Polubienia
0
Ocena
0
P
PrintablesZiP

Recycle your old beverage can !

Français Voici un fichier 3D qui vous permettra de recycler vos anciennes canettes, de coca par exemple. Il y a en fait 2 fichiers 3D : un à mettre sur les bords que vous aurez coupé dans la canette. Il est peu gourmand en matière et vous…

Pobrania
74
Polubienia
25
Ocena
0
P
Printablescrasbe

Recycling Fabrik MultiSpool Remix (Tighter and with Screws)

This is a remixed version of the original Recycling Fabrik MultiSpool, utilizing my Prusa Spool core for Recycling Fabrik Refills. The side pieces are thicker and the refill is held much tighter by the spool than by the original…

Pobrania
72
Polubienia
14
Ocena
5
P
PrintablesBooks

Recycle Symbol Coin

Coin with a recycling symbol engraved in it. Bill Loyd and Gary Anderson designed the recycling symbol. The recycling symbol is in the public domain and is not a trademark. The solid recycling symbol is unicode character U+267B .

Pobrania
68
Polubienia
2
Ocena
4
P
PrintablesJB

Gazelle bicycle mudguard fastening clip / spatbord klem

This part replaces the top part of a mudguard holder on some models of Gazelle (children) bikes. I hope this helps for someone. This is only the upper part. The part most likely to break. Included is the Fusion360 archive to help you get…

Pobrania
59
Polubienia
20
Ocena
0
P
PrintablesJoeBranch

Shopvac to Dust Cyclone Adaptor

Simple dust cyclone to shopvac hose adaptor. This allow to connect the “standard” amazon dust cyclone to the “standard” ridgid type shopvac hose! Don't forget to post a photo of the modele you make here in the Makes & Comment section to…

Pobrania
59
Polubienia
10
Ocena
0
P
PrintablesZbyněk Král

Mini Recycle Bin

Print instructions: I decided to use PETG. Printing the model does not require any special settings. See the attached 3MF file for detailed print settings. Supports recommended. Part List: Printed Body [x1] Printed Cap [x1] Neodymium…

Pobrania
52
Polubienia
16
Ocena
0
P
Printablesdjedje_zr7

Motocycle case carrier clip for side bags

Remove support Add/glue rubber (in black below) to prevent the parts from sliding (rotation) on the metal support Tighten with M4 six hex screw and nut

Pobrania
49
Polubienia
14
Ocena
0
P
PrintablesOBConcepts

Zero motorcycles rear fender hole blocker

Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…

Pobrania
47
Polubienia
10
Ocena
5
P
Printablesgravity

Bicycle Parts

Update 25.08.2023: Added Tire Changer model (untested) Added Bar End Caps model Added Lamp Mount Tire Changer (untested) A tool which helps to remove tires from the rim. You'll need two of them. Be careful because usually much force is…

Pobrania
46
Polubienia
11
Ocena
0
P
PrintablesMatis_STL

Cyclonic dust collector

2 versions available : Version 1 (Not fully printed) includes 4 parts : Common parts : “Cyclonic cone” “Karcher WD3 KWD3 Hose adapter” (if you want to plug this hose) “Bell mouth” “Hose clip” Version 2 (Fully printed) includes 4 parts too…

Pobrania
44
Polubienia
15
Ocena
0
P
PrintablesModellbau D

Motorradfahrer/ motorcyclist

motorcyclist figure, easy print, support needed :)

Pobrania
43
Polubienia
5
Ocena
0
P
Printablesdavet

Accessory Stand for the Upcycled ATX Lab Bench Power Supply

This is an accessory stand for the ATX power supply model by Caelestis Workshop (link https://www.printables.com/@CaelestisWorkshop). The unit will be sitting directly on my bench at this point and I wanted to make connections etc. more…

Pobrania
41
Polubienia
10
Ocena
0
P
PrintablesRichardLarson

Sena Bicycle Helmet Wind Screen

This model is a stick-on wind-screen that works for the Sena R1, R2 and R2 Evo Smart BlueTooth bicycle helmets. It may also work for other Sena helmets but I have not been able to try it on them. Background: My wife and I took up e-biking…

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesDan Rogers

Recycle Token - Great for gaming and contests that require tokens or chips

Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG. This print is useful for consuming the end of a roll that is too little to…

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesFabrizio
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
34
Polubienia
17
Ocena
0
P
PrintablesF3DX

Motorcycle registration holder for Spanish plate - Portamatrículas de moto

Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm

Pobrania
34
Polubienia
10
Ocena
0
P
PrintablesKrakHedKorps

Pulsar Puffco Peak Pro Hydroslide Recycler Base

I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…

Pobrania
29
Polubienia
5
Ocena
5
P
PrintablesKoffeekooker

Woom 5 Bicycle Rack Taillight Adapter

This is a simple taillight adapter for a Woom 5 children's bicycle equipped with a luggage rack. The standard Woom taillights you can order at their shop are made for the seat post and do not fit to the rack you can buy there as well. So…

Pobrania
26
Polubienia
1
Ocena
0
P
Printablesnhuhoai

Müllex trash bin fastener ~ Cyclindre de fixation pour poubelle Müllex

(pour le français, voir plus bas) Müllex Single 35 trash bin fastener. Settings Nozzle : 4mm Resolution : 0.2mm Infill : 15% Rafts : yes Support : no Duration : ~40m Printer : Prusa Mini+ https://shop.prusa3d.com/en/66-original-prusa-mini…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesArnaud

Bicycle pump holder

I made this mini bicycle pump holder for the cheaper Decathlon's hand pump. It goes in place of the second bottle holder.

Pobrania
18
Polubienia
4
Ocena
0
P
Printablesdym801

Recycling bin for AA and AAA batteries (MMU)

Recycling bin for AA and AAA batteries (MMU) khaki green white

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesBlackFury

Noctua 40x40mm Fan Mount for Prusament Spool (Prusament Upcycling)

I built a Prusament Upcycling - Laptop Riser and wanted to add two Noctua 40mm fans to improve cooling, one fan was mounted using the existing hexagons. The other one mounts via this attachment glued to the inside hole of the spool to be…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesMatteo1996

Holding Tab For Klim Cyclon Laptop Cooling Base

Shop Link: https://www.amazon.it/dp/B08BKJRXY2?psc=1&ref=ppx_yo2ov_dt

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesMichaelQ

Bicycle Tail Light for Stromer Seat Post

Stromer bikes use a special aluminum seat post adapter that has a beveled collar on the top edge (the last of the photo shows the original part). This beveled collar could also be used as a taillight. The idea came from one of the…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesZajda

Bicycle frame PressFit BB tube holder

This is very simple plug to bicycle frame with Pressfit BB standard (PF86 in my case but it works with other PF) Hole in the center is for M8 threaded rod. Printed 2 pieces hold my BB tube precisely in position in my own version for…

Pobrania
12
Polubienia
5
Ocena
0
P
PrintablesDave Tolnai

Light mount for bicycle rack

A simple mount for a rear rack to allow for easy mount of a taillight. Mount is 30mm in diameter which should split the difference nicely between larger/smaller seatpost style mounts. I printed in PLA w/ supports. Model uses two 5mm heat…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesOld Machinist

Alta Redshift Motorcycle Dune Safety Flag Fender Guide

Guide attaches to the rear fender (3M double sided tape used in pictures) to guide and support a dune safety flag on an Alta Redshift motorcycle. Curvature made to match the contour of the rear fender in the approximate position shown in…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesFilcuk

AOC Monitor Stand Upcycle to Tablet Stand

This design aims to convert a quite fancy AOC monitor stand into a tablet and phone stand . Shown on pictures are Galaxy Tab S7 (11") and Galaxy Tab A7 (10.4"). The mounting plate snaps-in onto the stand, making it easily removable.…

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesDave3D2D1D

Multicolor Print “Ballern (Bicycle)” on one layer

Hello, Here I like to share my Multicolor Card “Ballern (Bicycle)” (which means something like “full steam ahaed” :) ), all on one layer, with several Filament-Changes on same layer look at the reference picture to match the original…

Pobrania
6
Polubienia
1
Ocena
0
P
Printablesshaakunthala

Buffer Attachment for HOMCOM Bicycle Trailer [PETG]

I recently purchased a bike trailer (also known as fietskar/ Lastenanhänger). Its frame is made of 20 mm diameter metal pipes. (EAN: 4251774961240) I designed this “clamp and insert” buffer attachment to protect the frame paint when I set…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesJC

Tough Hook mount to Motorcycle Helmet Hook

Tough Hook mount to Motorcycle Helmet Hook (Love my Tough Hook) https://a.co/d/5RDsxH3 Here is the Helmet Hook HEAD that will mount to this. https://www.printables.com/model/1354553-motorcycle-helmet-hook-head-shaped-kind-of Printing…

Pobrania
6
Polubienia
5
Ocena
0
P
PrintablesFearless

Motorcycle Helmet Hanger for ratchet type straps

My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesFloris_Caris

Cat Bicycle Lighting Knog Binder

Is the silicone strap on your Knog Blinder broken yet? If so, I've designed a case that allows you to attach the Knog Blinder to your handlebars without having to rely on their faulty silicone strap system. All you need to do is buy some…

Pobrania
4
Polubienia
3
Ocena
0
P
Printablespaw3D

Cut Fir Twigs Christmas Tree - Upcycling

Purpose Cut fir twigs are a commonly available waste product during the christmas season. Instead of throwing them away, they can be upcycled into a beatuiful christmas tree. Hardware Part Quantity PLA or any other non-flexible ~240 g…

Pobrania
4
Polubienia
2
Ocena
0
P
Printablesbeerwema

Sigma BC900 Bicycle computer holding plate adapter plate bike mount

I recently bought an old bike which included a Sigma BC900 bicycle computer for logging speed, distance etc. After some cleaning, the computer itself worked like a charm, however, the plastic mount has seen better days. There is a small…

Pobrania
0
Polubienia
1
Ocena
0
P
Printablesthrutheframe

Bambu Lab Magnetic Chute Cover, Poop Management System, Recycle Cardboard bin

Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…

Pobrania
13 713
Polubienia
1950
Ocena
4,94
P
PrintablesLHB

Cyclone Dust Collector

Cyclone dust collector. Can be printed in two parts on the Prusa Mini! Bouth parts have a rim to be fitted together neatly. PrusaSlicer Files have all the necessary supports!

Pobrania
7394
Polubienia
825
Ocena
4,8
P

Cyclone Dust Collector

Cyclone dust collector for a 2.5" hose. Made to be as large as could be on a Prusa i3 mk3s. I used m3 hardware to put the top and bottom together but glue would work just as well. ¼-20's for attachment to the bucket. I put this on top of…

Pobrania
7246
Polubienia
1000
Ocena
4,86
P
PrintablesTmpx64

Bicyle / Bike Keyring / Keychain - Key Charm - quick and easy print - Gift idea - Road Cycling - bike lock - last meters - Gift inspiration - End of roll

Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…

Pobrania
7212
Polubienia
1273
Ocena
4,92
P
PrintablesRACBOTS

Casco Moto Llavero - Motorcycle Helmet Keychain

Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm

Pobrania
5757
Polubienia
557
Ocena
5
P
PrintablesJRT3D

The Recreator 3D - Community Bottle Cutter - RECYCLE - PET#1 - Plastic Bottle

Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…

Pobrania
5377
Polubienia
551
Ocena
4,78
P
PrintablesBootjevaarder

Motorcycle Roller Chain Key Ring

General Another keyring for gearheads! Pick your motorcycle brand and engine configuration. Print the roller chain, the sprocket holder and the name plate/configuration plate in your favourite color(s). Printing I printed the model on a…

Pobrania
4624
Polubienia
1737
Ocena
4,88
P
PrintablesBootjevaarder

Motorcycle Key Ring

Pick your motorcycle brand and engine configuration. Then print the two key ring halves and dowels of your choise in your favourite color(s). Glue the dowels in one halve, and glue the two halves together. Ride safely! Related Model…

Pobrania
3799
Polubienia
894
Ocena
4,87
P
PrintablesPuhsketti

Mobius Kaleidocycle box (kinetic ring box)

A neat box with a unique opening mechanism. Follow the original inventor on Instagram https://www.instagram.com/degreesoffreedomco And visit their website! https://www.enjoydof.com I reverse engineered this model by watching this reddit…

Pobrania
3593
Polubienia
354
Ocena
4,75
P
PrintablesTmpx64

Motorcycle / Motorbike / Scooter / Moped Keyring / Bike Keyring/Keychain - Key Charm - Gift idea - Gift inspiration - Klíčenka skůtru

One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…

Pobrania
3384
Polubienia
446
Ocena
5
P
PrintablesAdam L

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes

Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…

Pobrania
3267
Polubienia
733
Ocena
4,92
P
Printablesmroek

The Cyclone: triple lift, triple track marble machine

This is a marble machine with a lift that lifts three (or more) marbles simultaneously, and releases them to three separate tracks. Two of those tracks are connected in series, so a marble will therefore alternate between those tracks.…

Pobrania
3144
Polubienia
605
Ocena
4,92

Cyclo valve cover

Cyclo valve cover for 6 and 8 mm valves I recommend putting a collar around the valves so that they hold well on the printing plate

Pobrania
3097
Polubienia
805
Ocena
4,94

Upcycled ATX Lab Bench Power Supply

I wanted to enclose everything into a single unit, so I made this. This project provides a reliable and adjustable power source without breaking the bank. You can complete the entire project for as little as $50! Converting an ATX PSU…

Pobrania
3079
Polubienia
1591
Ocena
4,89
P
PrintablesThomllama

Cyclone Vacuum Dust Separator. Version 4.1 (1 to 1-1/2" hose)

January 31-2025 Version 4.1 released! Version 4.1 is released! minor mods and tweaks! November 26- 2024 Version 4 release! (note - v3 and v4 lower cone is the same(NOT V4.1!!) , only the upper inlet/outlet section is new so you can reuse…

Pobrania
2991
Polubienia
469
Ocena
4,7
P
PrintablesSL_ST

SL_ST TWO-STAGE CYCLONE SEPARATOR-01 Rudi

This construction is a logical continuation of one of the first options. The community likes it, apparently because of its low profile. It seems more stable. Our friend Der_Rudi asked to increase the gap for better throughput. Now it's…

Pobrania
2891
Polubienia
467
Ocena
4,82
P
Printables3Diocrity

Motorcycle Throttle Stop (Cruise Control)

Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…

Pobrania
2812
Polubienia
322
Ocena
4,94
P
PrintablesFay3dlab

Mini Bicycle Kit Card

A few months ago, i sold my Polygon Bend R2 bike due to financial constriction and i wasn't cycling all that much.. As nostalgia memories kick in I began to think what i can make with the bicycle in mind.. and after a few days.. the mini…

Pobrania
2763
Polubienia
447
Ocena
4,82
P
PrintablesNiffels

motorcycle chain lube thing for 520 chains

Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…

Pobrania
2616
Polubienia
631
Ocena
4,91
P
Printablesfgebhart

Ass Saver - Bicycle Mudguard

Perfect application for owning a 3d printer: Saw other cyclists having this hot mudguard on the back of their saddle. Looked it up and it costs about 10$. Since it is just a piece of plastic I asked myself - why not print my own version…

Pobrania
2590
Polubienia
394
Ocena
4,88
P
Printablesptakos

Simple Recycle Bin (2026 Update)

Original version was printed in PLA on Prusa Mini+ with 0.2 layer, zero top layers and 4 perimeters. 2026 update (v2) – Updated version features a slightly thicker bottom and a bevel around the base for improved durability and handling.…

Pobrania
2588
Polubienia
230
Ocena
4,86
P
Printablescmh

Bicycle disc brake caliper piston spreader

Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…

Pobrania
2557
Polubienia
277
Ocena
5