Wyniki wyszukiwania: cyclop

Cyclops Visor

This is an updated version of my older visor. Sleeker, and more akin to the 90s television show

Slingshot Cyclops v1.1

You attach the bands by pushing a looped end into the slot from the side and locking it with a piece of filament through the center of the loop. Print in 0.15mm with 5 perimeters and 13 top/bottom layers. I used different infill…

60mm Fan guard for EIBOS 3D Filament Dryer CYCLOPES

60mm Fan guard for EIBOS 3D Filament Dryer CYCLOPES, but can be used for any other fan :) After the fan grill of my EIBOS Filament Dryer melted, I had to replace it. I liked the design of https://www.thingiverse.com/thing:1274150 and did…

Eibos Cyclopes Drier Fan Converter

Eibos Cyclopes Drier's fan is noisy. Inspired by https://www.printables.com/model/51737 , I created another fan converter for Noctua 80mm fan. Features (compared to 51737): Have hole for fan cable Better air flow (I hope so. I'm not sure)…

Handle for Eibos Cyclopes

This is an easy to install handle for the Cyclpes. It's the first model i've shared, and it represents a few expirements I was doing with PrusaSlicer. I also incorporated some FFM design principles I've been reading about. It's not…

Carbon 13 TYPE M Cyclops Robot Head

I really liked modifying the Carbon this past month. Credits to Jonas Ronnegard on Artstation, I used one of his hard-surface kitbash heads as the basis of this design. You'll need some supports for the back portion, a simple snug support…

Cyclop - MSLA Homemade 3D Resin Printer ! by G3D

MSLA Cyclop Printer ! If you like my work, you can help me by buying me a coffee, thank you! https://buymeacoffee.com/guillaumehy or paypal.me/guillaumehaouy I should point out that I am a 20 year old student, it takes me a huge amount of…

Cyclops X-Men Bust - MARVEL Figures

Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed

75cm Cyclops Robot

Here you have another large (stands 75cm tall) filament print of a robot. This one is based on some pictures I found on Deviant Art. The original 3D model was designed by an artist on Fiverr for me. I don't have any art skilles in my…

Eibos cyclopes filament holder for Bones Bearings reds - 18022

I think the eibos cyclopes is great. Only the supplied bearings were much too stiff for me. The holder is inserted into the existing receptacle. I installed the Bones ball bearings 18022 in the wheels. Now it runs perfectly and without…

Eibos Cyclopes Desiccant Holder and Plug

I was struggling to keep filament stored in the Eibos Cyclopes dry. The other filament holders did not get enough humidity out. I designed this desiccant holder to mount to the top of the cyclopes and still allow the vents to be opened…

eibos cyclopes small spool adapter

i didnt like that Gerfunky used other bearing and rods for holding the spools on so i adapted his model so u can use the bearings that come with the eibos cyclopes and also the rods.

Eibos Cyclopes Lid for Dessicant Basket

This lid is a tight fit by design. You have to slide into the space under the handle and the plastic will flex a little bit. Once it has snapped into place you can bend a corner back to pour dessicant pellets in or out. If you drop the…

Cyclops Troll Head Closed Mouth

Cyclopes Troll head I was playing with in blender 3d The eye is removable in the the blender file and the reason for the extra geometry in the eye socket. Requires supports from the bed only, and I am able to print with 5% infill and…

Polyphemus the Cyclops – 3D Printable Statue

An original interpretation of Polyphemus, the Cyclops from Homer’s Odyssey , created as a detailed 3D printable statue. The model is provided as an STL that can be scaled to suit your printer, preferred display size, and printing setup .…

80cm Black Cyclops Robot (XL Print)

This is a quite simple but still cool looking robot … I found this robot design from the Artist “ GeppMultiverse ” on DeviantArt. Unfortunaltely this exact image is no longer online. But you can check the other awesom art of him/her. You…

EIBOS Cyclopes Accessories

Introduction This is an accessory pack for the EIBOS Cyclopes. A handle that connects to the top using two of the seven mount holes. Plugs to plug the 10 filament holes. A M6 washer to connect a PC4-M6 PTFE Tube Connector to one of the…

Cyclopes Filament Clip for Prusa

Simple way to use the teflon tube included with the Cyclopes dryer to route filament while being dehumidified. This model uses the rubber insert from the holes in the clear upper case in the dryer. Pull one from the upper case and pop it…

Cyclops Skull Clicker | Spooky Fidget

⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…

Cyclops Extruder

Cyclops Guide by ModBot ( Thank you for the great video ) Latest Update 22 September 2024: -Version 1.9.1 with better tolerance -PTFE tube connector -stronger tension arm ----------- Exciting News: Cyclops Extruder is Now in Open Beta!…

Subnautica Cyclops Submarine

This is a 3d model of the cyclops submarine seen in Subnautica. It was designed to be assembled as a kit, however since I have very limited experience with making printed parts fit, some glue could be required (I used some for several…

Cyclops Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Cyclops 28mm (supportless, FDM friendly)

A one-eyed fella. Bad at judging distance. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other models seen in the images are available on…

Cyclops Visor

This is a visor inspired by Cyclops's visor in the X-Men comics. It wraps around the face and there are supports to help it rest on your ears. This was made to match my face so you may need to make adjustments to fit your own face as…

Gridfinity Encyclopedia

Recently I have recently got into Gridfinity world and I'm amazed. Super easy to print and even easier to user and organize you stuff. I have also discovered a fantastic plugin for Fusion 360 called “Gridfinity Generator” that makes even…

EIBOS Cyclopes Extension Walls and Bearing Risers

The EIBOS Cyclopes is about as good a filament dryer as you can get these days, but it has a major flaw - the filament rolls are too close to the heat source and they will scorch. Some, including myself, have attempted to solve this…

Cyclops submarine from Subnautica

In English: Model Cyclops from Subnautica. There are three types of models of Cyclops itself. 1. Cyclops_with_cockpit is a Cyclops with the original cockpit. 2. Cyslops_whitout_cocpit is a Cyclops with the cockpit removed for ease of…

Cyclops Bust

Cyclops Bust. Recomendado imprimir con +/- 10 cm de altura.

Six Armed Cyclops

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

EIBOS Cyclopes handle

Simple handle for EIBOS Cyclopes dryer lid. Easier manipulation, less fingerprints on acrylic. Mount with two 20 mm M3 socket head cap screws and corresponding nuts. See attached images. For best strength, speed and print quality print…

Thargoid Cyclops / Basilisk Interceptor - Elite Dangerous

3D model of a thargoid interceptor of cyclops/basilisk variant (the geometry of the two is basically the same, they mostly vary in color in-game). Model taken directly from the game. All assets are property of Frontier Developments!! I…

Eibos Cyclops drive mechanism

The Eibos Cyclops filament dryer has an inherent design problem. Because the heater is directly below the filament spools when the heater heats up to temp it may overheat the filament to the point that the filament fuses to itself. Eibos…

X-Men Cyclops Goggles

"Don’t anybody move!… I lost my contact lens.” This is the X-Men Cyclops Goggles designed by me for a costume party. They print out nicely in 4 pieces, which I did on my 'Up! Plus 2' 3D printer using the 0.2mm layer thickness. I've added…

Metric Water Tight Cylinder for Cyclops Model Submarine

This is a design for a metric watertight arcrylic cylinder (90/84 mm) which fits the Cyclops R/C Submarine https://www.thingiverse.com/thing:4560120 by Robert Cook. Modifications Additionaly to the two O-Rings on each cap it is possible…

EIBOS Cyclopes Vent Plug

Vent plugs for the top of the container to control air flow to manage dryer temp. Two parts and outer assembly to block all outer vent holes and the inner can be completely remove or lift and turn.

EIBOS Cyclopes Extension Walls and Bearing Risers - 1 Part with threads for Bowden Couplers

The original model was split in 2 parts, which is not necessary, if you have a 300mm printbed. Also, the original is a little too short, so that the eibos lid fits only with force. I added 1mm of length and chamfered the top part. Lastly,…

Dummy 13 Cyclops Armor

Whoever uploads a make of my updated armor first, I will use their pictures in the new model cover! For the first model, When plating this model on the slicer, adjust or change the orientation of the forearms And Lower Legs, so that they…

Three Headed Cyclops

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

EIBOS Cyclopes Port Plug

I printed 16 of these to plug all the unused filament and vent ports. The number of openings causes the internal temp to drop to the point where it really wasn't doing much to lower filament humidity.

Cyclops for Tabletop gaming

A Cyclops perfect for your tabletop game! Print each piece as flat as possible with supports and a brim. This was based off a file I found here: http://www.123dapp.com/123C-3D-Model/Cyclops-with-Large-Rock/768231 . I just modified it and…

Eibos Cyclopes Filament Drier 80mm fan mount and bigger stands

Eibos Cyclopes Filament Drier has a very loud stock 60mm fan, with this fan mount you can replace it with 80mm Noctua 5V fan, which is almost completely silent, comparing to stock Print instructions I printed stand with TPU and fan mount…

Eibos Cyclopes Filament Dryer Plugs

I noticed that after drying my filaments in the Eibos Cyclopes multi-filament dryer , the humidity begins to creep back up as moisture sneaked in through the open exhaust and filament holes. To prevent that, I designed exhaust and…

Cyclops FREE 3D Print model

Hello friends. I share with you another figure. This is Cyclops from X-Men. The model is available without supports. You can support me and subscribe to my Instagram 😊 https://www.instagram.com/monster_prey/ You can download other FREE…

Eibos Cyclopes Drying Rack

I wanted to dry silica gel packets in my Eibos Cyclopes filament dryer so I designed this simple drying rack to fit inside and stack so there's two layers. There's room for a third layer, if required. I printed it in ASA so it would…

Cyclops to play dungeons and dragons DND

Cyclops Size: Large Type: Giant Armor Class: 13 (natural armor) Hit Points: 76 (9d10 + 27) Speed: 30 feet STR DEX CON INT WIS CHA 18 (+4) 11 (+0) 16 (+3) 8 (-1) 10 (+0) 6 (-2) Senses: Passive Perception 10 Languages: Giant Challenge: 4…

Eibos Cyclops Desiccant riser

Update 8/18/2023 Revised design of riser to have slide locks so no glue is necessary added PTFE tube outlets in the riser shell to allow easy access of the filament Update 10/28/2022 removed the gaps on the mating surfaces for the front…

Cyclops

If you like what I do and are interested in supporting my efforts to create free board game models, then check out my patreon: https://www.patreon.com/warehouseworkshop Patrons have all my models available in one place. You will also have…

EIBOS CYCLOPES - HANDLE

The Eiboss Cyclopes lid doesn't come with a handle which means that in use, removing or replacing the lid is a two handed affair. This handle was designed to look as though it might have been an original fitting and uses the existing…

EIBOS Cyclopes raiser

Wall raiser for EIBOS Cyclopes filament dryer to keep filament spools from overheating. Eibox Cyclopes is great filament dryer with fatal flaw - hot air is blown directly to filament spools from very short distance. Despite temperature…

cyclops rpg figure

This model is AI generated and it was intended for RPG games it was intended for RPG games. This model is AI generated and it was intended for RPG games it was intended for RPG games.

The Laughing Cyclops - Optimized Bike Wheel Truing Tool

This indicator will help you true your wheel! Simply attach to the frame of your bike or your truing stand and adjust the knob as needed. I was able to use it in several ways: By sound as my PETG tip had a lot of friction. By wobble when…

Cyclops Visor

Cyclops' visor from the X-Men. My head is a little big so scale as needed. For the glass part, I just bought some light filter paper off Amazon and cut it to fit the hole. Kind of cool seeing the world in red when you wear it.

Desiccant Baskets for Eibos Cyclopes Dry Box

These baskets are designed to fit in the front and back of your Eibos dry box. Can be printed without supports or brims. I would suggest to pick a material that won't deform when using the dry box's heating element. The pictured print I…

Eibos Cyclopes twist open-close vent plug

Inspired by @ flackenstein 's plug. I wanted a single piece plug. And I wanted step files instead of STL. So I got the calipers out and designed one from scratch in Fusion 360. This is a new version of my previous design . A comment from…

Cyclops Sock Clip

They stopped making these, so I cloned them. Print in ABS so they can go in the washing machine. PETG might also work. Clone of: https://www.amazon.com/Cyclops-Sock-Clip-Keeps-Multi-colored/dp/B006S3Y4A0 Category: Household

Eibos Cyclopes Upgrade (Extension)

I didn't like the obstructive center part of the original Eibos Cyclopes filament dryer because it gets in the way when using odd-width spools. Unfortunately, in the available fixes, people have kept the center part. My fix eliminates the…

Cyclops beer can holder

Remixed some things to hold a beer can, USA 12oz can Category: Kitchen & Dining

Lego Compatible (11257.dat) Minifig Headgear Mask Cyclops with Horn and Teeth Pattern

This model is compatible with the lego system.

Eibos Cyclopes Extension Rollers

EIBOS Cyclopes Extension Walls with filament passthrough

With this remix you can easily add 2 PC4-M10 connectors to pass through a ptfe tube. You need to print the “frontv2.stl” and 2 nuts.

EIBOS Cyclopes PTFE adapter plate

The adapter plate allows for top mounting the ptfe connectors to the EIBOS Cyclopes to manage filament path. The design has three posts on the lower plate that have a snug fit diameter that can just press fit into the upper plate. Middle…

Eibos Cyclops - Easy Access & Fillament change Spacer Assembly

Updated 25-02-22 Split main body, pivot back plate hex corrected to 7.1mm across flats for M4 nut I have designed this spacer and pivot assembly to make it easyer to change the filament on the Eibos Cyclops dryer. As good as the dryer is,…

Eibos Cyclopes Silica Basket with lid

I don't own one of these dryers to test the fit, I designed this when I thought I was going to buy one but ended up changing my mind. The dimensions are similar to TiToHa's on Thingiverse , so I'd imagine this would fit the same. Would…

eibos cyclopes top plug

Inspired by @ flackenstein 's plug. I wanted a single piece plug. And I wanted step files instead of STL. So I got the calipers out and designed one from scratch in Fusion 360. The Fusion 360 design is parametric, have fun changing…

Cthulhu — Cyclopean Throne

Cthulhu — Cyclopean Throne 🇫🇷 Français Ce modèle représente Cthulhu assis sur un trône cyclopéen, inspiré de l’univers d’horreur cosmique de H. P. Lovecraft. Plutôt que de montrer une créature en action, cette sculpture capture un instant…

Huisseries H0 "Le Cyclope"

Il s'agit des huisseries du bar-restaurant "Le Cyclope" de la revue Clés pour le train miniature . J'explique tout de la mise en œuvre de cette maquette à découper dans cette vidéo :

Cyclops Jeep Duck

X-Men Cyclops Jeep Duck

EIBOS filament dryer CYCLOPES heat shield

! Warning: do not print with PLA, use ASA or ABS instead! On heat sensitive filaments such as PLA, the dryer can be a little hot on the bottom. In order to distribute the heat throughout the whole chamber, this heat shield redirects the…

Eibos Cyclops Motorized Fixed

Redesigned some parts to make them stronger and fit well together

EIBOS Cyclopes heat shield

WARNING! Please, do NOT print this with PLA, PETG, or even ABS! Use at your own risk. I am not responsible for any damage, direct or indirect, due to your use or misuse of this model. You MUST print this model with a material that has a…

Alien Clicker | Cyclops Eye Fidget

⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…

Upgrade for Eibos Cyclopes from radial to Axial rolemount

This is specaly for soft roles like from sun. If you want the short version to replace only one side you need: 2x Leg 2x holder short If you want to replace the whole place you need: 2x Leg 2x holder long 1x Axis For the short version you…

Cyclops Brute – One-Eyed Giant Figure

This Cyclops Brute miniature showcases a towering one-eyed giant wielding a massive club. The sculpt focuses on bold muscular form and thick simplified armor elements to ensure durability during FDM printing. Facial features are…

ZEFAL Cyclop Fahrradspiegel Befestigung

Das Original ist bei einem Fahrradsturz gebrochen. Druck in PETG mit 100% Infill. Model flach auf der Druckplatte mit Support drucken, dann ergibt sich die maximale Festigkeit.

Cyclops

Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤

Cyclop mit massivem Streitkolben/Cyclop with massive ram

.

Cyclops

Old model :) single and multipart (not multimaterial) version

EIBOS Cyclopes Wallmount

The Filament Dryer is mounted with the long side facing the wall. You will need 4x 6mm screws for the wallmount

EIBOS CYCLOPES KINETIC SPOOL DRIVE

OVERVIEW This is a drive mechanism that will rotate a second spool of filament in the dryer as the printer is drawing filament from the other. No modification is needed to the original dryer so it can easily be returned to it's standard…

Geeetech A20m mount 2in1 bigtreetech cyclops hotend

11/26/2020 Update: V3!! (Green) Fixed part that was touching M5 screws, Added mounting point for 40mm fan As i accidentally destroyed my Geeetech A20m hotend trying to unclogged it. So i'm designing a mount / backplate for the Bigtreetech…

Polyphemus Cyclops Bust

Channel the terror of Homer's Odyssey with this Polyphemus Bust ! The most infamous of all Cyclopes, Polyphemus was the savage shepherd who trapped Odysseus and his men in his cave. This brutal son of Poseidon represents raw, untamed fury…

Encyclopedia Organizer

Organizer for the board game Encyclopedia

Castlevania Cyclops

A Castlevania Cyclops. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures

Cyclops Sentry Rock Throw - MGM Print-Ready Mini

Cyclops Sentry Rock Throw - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Guard your ancient ruins with the titanic Cyclops Sentry , captured mid-roar as he heaves a massive boulder to crush any intruders foolish enough to trespass. A…

Marlin 1.1.9 Flsun Cube Stock, Chimera and Cyclops

Marlin 1.1.9 for the FLSUN Cube printer Before trying to flash this firmware on your printer please make sure you use the ramps or mks gen l board on this printer with the stock drivers. This firmware is meant for the chimera version of…

lego cyclops visor

lego

Printable bolts/nuts for Eibos Cyclopes Handle

ZombiPach's Cyclopes handle model calls for using metal screws/washers/nuts but everyone knows that using non-printed parts is for the timid, so I made some thumb screws/nuts that are sized to fit the holes in the model and Cyclopes lid.…

X-Men Phoenix Force Cyclops (Mask)

After the Phoenix Force was split by Iron Man , it possessed Cyclops , Emma Frost , Namor , Colossus , and Magik . These X-Men , now known as the Phoenix Five, used their immense powers to bring about a global paradise. The Phoenix Five…

Eibos Cyclopes Wall Riser TBXremix

Simplyfied riser with two PC4-M10 connectors on the backside. Filament rolls not rised. No screws needed. No supports needed. 2 parts. 100% infill PETG is recommended ------------ Part 1 v1.3 modified 3mm more lenght connectors a bit…

Eibos Cyclopes Magnetic PTFE Adapter Plate

I didn't like the screwed in PTFE coupler (a hassle to feed filament through) and wanted a quick swap feature. So I remade the upper part of the adapter plate in F360 based on the measurements of the old design and mashed the magnetic…

Cyclops Vargouille

If you've seen terrible and terrifying vargouilles swooping down from the skies, eager to find victims to consume and infect. What's more terrible is when a vargouille manages to infect a creature that is outside of their normal prey.…

Cheetos's Dual Direct Drive Chimera / Cyclops Extruder for Prusa I3 Style 3D Printers - Using Ultimaker 2 Style Knurled Bolts

A Dual Direct Drive Chimera / Cyclops Extruder, made by me, C_Cheetos. Any feedback is appreciated! This is a relatively easily printable direct drive dual extruder sollution for prusa i3 style 3D printers, using 1.75 mm filament.…

cyclops dwarf

have fun needs support

Eibos Cyclopes Drier Fan Converter (minus a couple overhangs)

Two places were giving me trouble printing cleanly in PolyMax PC. The rounded overhangs near the heater screw holes. I suppose I could have just printed with supports, but I opted instead to extend the problematic overhangs down to the…

Eibos Cyclopes Single Axel

Just a simple model to create a single axel for the Eibos Cyclopes. When printing from one spool, this will allow the other spool to spin too. One issue is if the spool you are printing from is quite a bit lighter than the other spool, it…

ttrpg NPC Cyclops Guardian DND nosupport FDMprinting

use cura 75deg Max overhang prints in 0,2layer HAVE FUN +++ Please see the other npc i made

Ugly Monster One-Eyed Cyclops

Meet the Ugly Monster, a quirky one-eyed creature that’s equal parts creepy and adorable.

Cyclopes Mini PTFE Port

2 part model - ptfe port that mounts through the outside of the case and a nut that secures it in place from within. Recommended Filament: None – I've printed with PLA, PA, and PC and all worked fine. Nozzle Size: 0.4 Layer Slice: 0.16…

#3DTakoTuesday Cyclops Eye

Transform your #3DTakoTuesday from an octopus into a one-eyed monster/alien! This model replaces 3dtakotuesday.lips.mm.stl. See here for more accessories and information for #3DTakoTuesday:…

Steinfigur eines kämpfenden Zyklopen/Stone figure of a fighting Cyclops

.