Liczymy pasujące modele…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Wydruk około 22,38 €–27,35 € nettoWstępna wycena jednego wariantu
Modeled a large d20 to print just for fun. Actually works quite well. I would avoid rolling it on any surface you don't want to damage (roll it on carpet). There are two models. One large, one not so large. The big one has been…
Wydruk około 42,39 €–51,81 € nettoWstępna wycena jednego wariantu
Festool D27/ D36 suction hose holder - simplify your tool management Where do you currently hang in your suction hose? Print your own Festool suction hose holder and make your everyday work easier and more productive. Do you need further…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
D20 Dice Box – Magnetic Hey maker! 👋 A practical and stylish D20 dice box with a secure magnetic lid. Features: Designed for 5×5 mm round magnets for a snug closure. Works with flatter magnets using a printed spacer. Secure transport and…
Wydruk około 5,02 €–6,14 € nettoWstępna wycena jednego wariantu
I really liked the R2D2 designs that hold the Google Home Mini, the one that I liked the most was pbechard remix that has a tilt forward so we can see better the Google Home Mini. One thing that I noticed was that this model had some…
Wydruk około 9,48 €–11,58 € nettoWstępna wycena jednego wariantu
20 sided die, scaled up about 500%. or so
Wydruk około 30,52 €–37,31 € nettoWstępna wycena jednego wariantu
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simpel dice tray with a D20 logo on it. Print as you like no special requirements. Scale the x and y axis if you want it smaller or larger.
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
ANG below POL To prawda że żadna naprawdę dobra historia nie zaczęła się od 20.. ale czasem naprawdę potrzebujemy 20 :) ANG No good story starts with 20… but sometimes You realy need 20 :) if You like it please rate it :)
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.32mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 18,44 €–22,54 € nettoWstępna wycena jednego wariantu
It's a D20 for your car tires! Print it out and screw it on! Threads are made to standard. If it doesn't fit on your valves, print at 101% or 99% to get a better fit; some tolerance stackups may make hard fits. Also might need to be…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
I added countersunk holes for the VESA mounting screws. Also a 10mm 2.5M screw are needed for mounting the dock.
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this simple hex bases for my colleague's collection of several D20 dices of magic the gathering. They come with different heights which allows positioning them like a stairway. There is also a variant that turns the dice by…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Just a simple d20 fidget clicker.
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
I'm calling this a "dice holder" here because that is what the original on which I based this re-mix was called. But it's really just a lidded box in the shape of a D20 die which you can use for whatever you want. I'm also calling this…
Wydruk około 2,28 €–2,79 € nettoWstępna wycena jednego wariantu
Festool suction hose reel holder - improve your tool management. Can be used in addition to : https://www.printables.com/fr/model/806346-festool-d27-suction-hose-holder…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A coaster in the design of a 20-sided die! FEATURES 💦 Functional as a coaster – catches condensation from your drinks to protect your games and tables! 🎲 Decorative for your game room or anywhere else you want to show your love for…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena jednego wariantu
I designed this XL D20 for printing on my Prusa XL. I used organic supports, but considering the underside looked perfect and the supports just popped off in one piece, I wonder if they were ever really needed. This is printed in two…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
This is a copying ring for bosh router. The Code is for PLA with PRUSA printer MK3S or similar devices
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
dashboard pour fanatec dd1 dd2 https://www.amazon.fr/dp/B07PLF8V8Y?psc=1&ref=ppx_yo2ov_dt_b_product_details acheter l’écranIBest 5 inch HDMI LCD B 800x480 5 pouces et le le mettre dans les cache imprimé. les visses sont fourni avec…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena jednego wariantu
Brackets to mount a Creative Stage Air speaker on a Vizio D24f-G1 TV using the feet mount holes when it is hung on the wall with a VESA mount. Includes retainer clips to hold the speaker from sliding out the end. To attach, mount one…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Under table cradle for Dell WD15 docking station - we needed a way to mount it near the cable opening in the meeting room so that the cable is maximally long. This screws in right beside it with easy access to the plugs for cables. Use…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
This is a sideproject i made for my girlfriend. The original (unfinished) project is an icosahedron lamp, similar to nanoleaf but in a polygon shape. This will be posted on my profile when its done. She asked me to turn my prototype into…
Wydruk około 2,48 €–3,04 € nettoWstępna wycena jednego wariantu
I've been working on this for a while now. This is version 4. I did a test print of version 3 (the files you see) and just needed to add one small thing to it to get the connection between the halves ready, so I did that, and I'll do…
Wydruk około 4,86 €–5,94 € nettoWstępna wycena jednego wariantu
This is a simple business card holder. It's 2.72" (82.55mm) high (X) 2.8" (73mm) wide (Y) and 2.7" (69mm) thick (Z) in full with a stand on the bottom and holder with tabbed ends on each side. I made it for some vertical business cards I…
Wydruk około 4,94 €–6,04 € nettoWstępna wycena jednego wariantu
This is a simple D20 with a lid and in the main part it has a spot where you can store stuff, like dice, money, candy, and whatever else you can fit. It's 100mm at the largest point (while the top and bottom are connected) I added a tab…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
Stopka do krzesła na rurkę o średnicy 20 mm, wydrukować najlepiej w PETG. Stopka ma zmienny kąt, moje krzesło ma nóżkę pod kątem 60 stopki do podłoża. Chair foot for a tube with a diameter of 20 mm, preferably printed in PETG. The foot…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Audentes fortuna iuvat! Protect your Philips OneBlade with a travel case worthy of a Bohemian knight. Inspired by the iconic Saviour Schnapps and medieval scroll cases from Kingdom Come: Deliverance , this design combines rugged…
Wydruk około 12,13 €–14,83 € nettoWstępna wycena jednego wariantu
I like drak3's resin vat cover for the Anycubic Photon D2 a lot, but I didn't have a knob handy to attach. So why drive 15 minutes when I can spend 20 minutes modeling and 2 hours printing instead? Print Settings: layer height: 0.3mm or…
Wydruk około 2,84 €–3,48 € nettoWstępna wycena jednego wariantu
Just a simple holder for my flashlight. Version 1 is slightly loose fit, V2 is tighter, but untested, as I was happy enough with the first print, but figured someone else might appreciate the change. I printed it on it's side with…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Wallmount for E-Bike 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor. Mountable with two screws to a wall or, using the holes on the backside with 2 screws (Phillips Rounded Head…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A classic philips one blade holder with a ,,Kingdom Come : Deliverance II'' theme. The model has a closing mechanism, so you can protect the top of the razer and have a cool, medieval vibes in your bathroom!
Wydruk około 3,95 €–4,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
R2D2 Added to versions of g-code: Note the 33 hour label assumes you are printing both. %100 = 24 hours %65 = 9 hours.
This fidget d20 is squishy and satisfying, perfect for your desk or backpack! Note: This die has a tendency to not remain perfectly round, and as such isn't very good for actual TTRPG play. Better stick to your solid dice for that!…
The R2D2 kit Card has a multicolor and a single color print and is print in place! The R2Q5 is a Multicolor only and is also print in place you should use supports for both!
Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.
This is the final version of ED209 in 1/10 scale. Includes all the parts to make this version as screen accurate as possible. Print at .1mm to avoid excess sanding.
I'll be honest, I didn't like some of the current cut and paste versions of the R2D2 Alexa Echo Dot 3 docks available, some of them had a lot of errors when slicing. I decided to make a "as close as possible" screen-accurate version from…
This is why I would never, ever allow a player bring a 3D-printed d20 to any of my games! It's just too easy to load the dice if you print 'em yourself. On the other hand, they would be OK for a player to use as a substitute for the…
This cat toy is unique and puzzling to comprehend at first glance, but prints all at once with no supports. The ball inside rattles around but cannot be removed from the D20 (trust me, I've torture tested it with my cats). It also makes a…
Just a simple Hose Clip for the D27 Festool hose. Category: DIY
This is my 1/6th scale ED-209 from the original Robocop movie. I've decided to give it away for FREE. NO reposting on other sites. Consider this a Printables exclusive - else or NO MORE FREE _SHIT for anyone. Also, NO RESELLING OF PRINTS…
Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…
Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…
KCD2 Wooden Chest for Philips OneBlade 360 Store your treasure! We present to you a wooden storage chest , designed specifically for the Philips OneBlade Kingdom Come II Limited Edition . The chest features a Wood-imitation body with…
Step up your tabletop gaming experience with the D20 Slot Machine Dice Tower! This unique 3D model combines the thrill of a classic slot machine with the functionality of a dice tower. With its eye-catching design and practicality, it's…
These glands can be printed in standing position. low layer thickness and good cooling is really helping a lot with resolution of the threads. But it is also designed to work with medium print quality. even bad stringing should be ok with…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
I wanted to try Rangers of Shadow Deep one weekend so I needed d20 dice. I added a small chamfer to "Deliberately unfair (and fair) d20 dice" by Amatulic ( https://www.thingiverse.com/thing:4853423 ), so it rolls a bit better. Chamfering…
Slicer Settings Feel free to use whatever you're comfortable printing with, these are my recommended settings. Nozzle Size: 0.4 Layer Height: 0.2 (small&mid) 0.3 (large) Extrusion width: 0.3 (small) 0.35 (mid&large) Speed: no…
My version of R2D2 with moving legs, head, and retractable center leg. I may try to do more detail work on the skin in the future, but I'm not very good with that stuff yet. Inspired by someone's version with wheels and moving head, but I…
Description Keyboard stand, with an optimal ergonomic angle design, very comfortable for long-term use without wrist pain. Keyboard Stand with Upright Mode — Significantly Saves Desk Space Dual-Mode Keyboard Stand (Vertical & Horizontal)…
With this die you will always score 20 :)
Finally, a D20 you can print with reasonable quality without support material! This model is fully parametric and can be generated/changed using OpenSCAD. Parameters that can be changed include: Diameter Corner/edge rounding Font Depth of…
UPDATE: Added varying severity of fillets (rounded edges/corners) for ease There are a lot of custom D20 models out there, but I didn't see any where it was blank and available for customizing… so… I watched a tutorial on how to and have…
UPDATE 2/10/2024: Be sure to check out the R2-D2 feet remix for use with the DUMMY 13 - Acrobatics pedestal I recently made a Lucky C-3PO by Printables user egz and decided there needed to be an R2-D2 to go along with it. If you like…
Bring the galaxy's most beloved astromech droid to life with this incredibly detailed 3D printable STL model that captures every iconic curve and panel line. This stunning figurine showcases R2-D2's classic cylindrical design with…
This is the stand you're looking for. If you like my work, please consider joining my patreon with Stand it Up Comics! https://www.patreon.com/Standitupcomics A little stand for the Alexa Dot 4, inspired by the astromech everyone loves.…
This is a redesign based on the idea and software from Ultimate ESPHome DIY Smart Sensor | fixtSE The individual sensors are clipped in neatly and are not loose in the housing. Printed with PLA, 15 % infill. Electronics used: ESP32 30 PIN…
Case to hold a LD2410 MMWAVE sensor module and a Wemos D1 mini board. The radar module can be rotated horizontally to adjust the angle and direction it is sensing. Four parts: The case that holds everything A holder for the radar module.…
https://www.youtube.com/watch?v=klmxXRzAuSU https://learn.adafruit.com/talking-d20-20-sided-gaming-die/overview The 20-sided die — or “d20” as it’s known to tabletop gamers — is an icon of geek culture. In this project we’ll 3D-print a…
A redesign of my original D20 Cookie Cutter that incorporates the stamp into one piece and a cutter into the other. There are two separate objects included in the file. They will print in place, so both objects can be centered on the…
Scaled for d20s that are approximately 20mm measured from face-to-face. I have oriented the d20 to be held with a vertex at the top, mimicking the original bulb's shape. After fiddling with my prototypes, I wasn't sure if I wanted to…
Adapter to connect FESTOOL™ CLEANTEC™ D27 Dust Extractor to DeWalt™ Air-Lock™ tools This adapter is designed to allow a FESTOOL dust collector with a D27 hose fitting to connect easily to DeWalt tools featuring the "AirLock" style dust…
Display your tabletop gaming dice with this Mage statue that nicely shows off your most prized D20. Includes 3 files Un-unioned 3D Unioned 3D Filled Dice area , This one does not have a place for a dice to sit and can be used as tabletop…
Cracked D&D dice set (D4, D6, D8, D10, D12, D20) fixed and optimized for printing
I really like the original design by Simomura, but found that I couldn't see the top lights of the Google Home Mini when interacting with it. My Home Mini sits by the TV and the angle of the R2D2 pointed the lights away from my viewing…
Star Wars R2D2 Planter Vase. Can we resized to any size that you like. Could also be sized to use as Pencil or Pen Holder or Candy Dish or Bowl. There is a small hole in the center of the planter to allow for water to not fill it up. I…
If you have D27 hose with taper then I recommend going with 3 of each size (Small/Medium/Large). For D36 you can just use the same size all the way along it. The wall bracket is for the D27 only. If you would like a wall bracket for the…
The SD2SP2 POR (Pro?) has a problem - there is a gap between the SD card slot and the GameCube chassis. It's very easy to insert the SD card into the void and you'll have to unscrew the GameBoy Player just to retrieve the card. Print this…
Please comment, rate, and post a make! Update 1/19/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with…
I designed this as a Christmas gift for members of my D&D group. It can use up to 5, 6x3 round magnets to hold the cover in place. The hinges can be installed with a short section of filament. There's a top and bottom that have tabs if…
I made this adaptor to connect my Festool D27 hose to some cheap Titan shop vac attachments I bought, but it should fit any attachments with an internal diameter of 32 mm. The Festool cleantec end locks into place with retaining tabs…
Edit 09/04/2020: adding 0.10 mm depth in the magnet hole. A storage box with the shape of a d20 with correct number pattern. You can had magnets 7mm x 1mm to close the lid. Print instructions no support required at normal size you may…
Included dice are two-sided dice (d2) that have shapes similar to six-sided dice (d6) , but with joined parallel faces. For each die after rolling the result is what will be seen at the top of the die. Those are not standard dice used…
Drop in upgrade compatible with AR platforms and other AR grip type devices, including airsoft GBBRs. Features an ergonomic backstrap for greater control. Includes 4 texturing options for increased grip. Print bottom side down with tree…
* update * new harder version head available if you find this one to easy. https://www.printables.com/model/597903-star-wars-r2d2-lvl2-hard-edition-puzzle-with-windu Hey all couldn't find a a small r2-d2 that my rubbish printer could…
Demo video https://youtube.com/shorts/_D_-_w1XRVI I printed everything with a .2 layer height on a Prusa Mk3s, and have included the prusaslicer projects I used. I used support on build plate for the core although it may be largely…
This is a connector cover for a Bluetooth OBD-II scanner. No support material needed. Might require minor scaling (I printed it at 100% and it fits just right for me). Support If you'd like to support me for the 3D models I distribute for…
A basic D20 dice. Nothing super special. I did reference the proper design of a D20 dice, so the numbers are not randomly assigned. Printable with resin/ FDM. Standard tree supports with Cura work well. Print Settings Printer Brand:…
This is a multicolor only evil version of R2D2 R2Q5! Prints with supports on any multicolor printer colors are red, silver, and black! THIS IS THE SEQUAL TO R2D2 KIT CARD!
**UPDATE** - I posted a version 2 that works a bit better… https://www.printables.com/model/353451-d20-cookie-cutter-v2 My wife loves to bake and my son loves D&D and cookies, so I made a cookie cutter to look like a 20 sided die. It's a…
KCD2 Helmet Wall Mount for Philips OneBlade 360 Armor up 🪖 We present to you a helmet wall mount , designed specifically for the Philips OneBlade Kingdom Come: Deliverance II Limited Edition . The helmet features a functional holder that…
Descripción: Este soporte ha sido diseñado para montar un ESP32-C3 Mini junto con un sensor LD2450 de manera compacta y eficiente. El diseño incluye una base redonda ajustable con sistema giratorio que permite orientar el sensor con…
This design is based on spacing points as equally as possible on a sphere (using charge-like relaxation optimization) and then cutting planar slices perpendicular to those directions. This make fairest as possible dice for any number…
The Unifi Dream Router looks like an iconic droid from long time ago in a galaxy far, far away.... I came across this design but it wasn't really made for printing. I decided to clean it up to make it more printable. With it, the Unifi…
I made ifixcpu's sweet design one solid piece. Prints upright without support.
Oversized twenty sided die that you fold up to assemble - it snaps together. This has 2 great advantages - that first smooth layer is all over the die surface and you can change filament colour for contrast numbering. Print instructions…
Model of the robot R2D2 from Starwars Still some work to complete it but I thought I would upload it anyway
Here's one of R2D2 I did a couple of years ago and forgot to post. Enjoy ;) Note: I've added a V2 of R2D2, as I'd just noticed that there was some detail on R2's head that didn't look like it was supported properly and might be prone to…
I made this for a friend from a design off tinkercad
3D Print a D20 inside an icosahedron inside a dodecahedron to test water soluble filament. Slice settings on learn guide: https://learn.adafruit.com/how-use-to-pva/overview Print instructions Licence: Creative Commons - Attribution…
Bring a galaxy far, far away to your desk - with a wiggle! This R2-D2-inspired flexi bot is an articulated, print-in-place design - no supports, no assembly for FDM, just instant Star Wars fun! 🛠 Easy support free print in place printing.…
“These are not the tissues you are looking for” – Obi-Wan Kenobi (in 0 ABY to a Stormtrooper with allergies) Assembly The model is stored as a single multi-part STL file in “R2-D2 Tissue Box v8.stl”. Don’t touch it. Just don’t. If you…
May the 4th Be With You! If you like this kind of stuff consider supporting me on www.patreon.com/wekster Models are multimaterial (for machines like mmu, ams, palette) not the multipart that you can assemble later!
R2D2 bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/3HwXJQMGgsQ https://youtu.be/y7rcWTLWsCM https://youtu.be/5cWb99a7tlI Printing Base, head, and spring can be printed without supports. Ideal line…
Standard hose coupler for Festool hose for connection to Festools line of dust extractors e.g. CT SYS, CT MINI, CT MIDI, CLEANTEC CT 26, CLEANTEC CT 36, CLEANTEC CT 36 AC, CLEANTEC CT 48, CT-VA pre-separator. Check out my profile, I have…
just another S-hook - but fits perfect for universal standard 28mm wood rods
