3059 modeli
update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…
Wydruk około 6,68 €–8,16 € nettoWstępna wycena jednego wariantu
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Car phone holder and mount, universal Vertical for phone calls etc and pull up the pin to tilt the phone left or right
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Print as shown in screen shots with flat (non-track) side down to plate.
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
Combined Extended and 15deg PTFE connectors
Wydruk około 1,09 €–1,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
This Sanding Block is useful for sanding inner Corners (example Picture Frames). The Lower screw will fix the sanding paper, the upper Screw will tension the Sanding paper. Cut your Sanding Paper into 50mm x 170mm stripes. Printed in PLA…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
None of the existing wedges for the G4 doorbell fit my needs, so i made one that did. This wedge puts the doorbell at 90 degrees to the door for doorbells that are mounted perpendicular to the door. I didn't trust the snap-on mounting to…
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
Printed using ePLA. use support as in the attached bgcode or use your own.
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
Small 90 degree clamping block for spring clamps, used to align ribs while building balsa RC plane wings or other smaller items. Clamp is 1.25" square and 0.5" high. The small round pad it perfect for a fingertip to hold the clamp in…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
The original model is a fantastic idea, yet I it lacked the PCB holder. Instead of adding a tilted stand to your grinder, just replace the original base. As a benefit, the button is moved to the front left, which at least for me is…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview TexRC KerbTex Medium Radius (300mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 45 degree corners and hairpins.…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed using ePLA. Support is required as already planned under the attached bgcode file, or use your own. Threads are NPT type.
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
Templates to easily join boards at a desired angle. Multiple versions are available for different board thickness. You can get away with the thickest one if the desired precision is not excessive, or you can print multiple versions if…
Wydruk około 3,95 €–4,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I designed a slip-on mouth piece for this particular ocarina in Fusion 360 that changes the angle of this Ocarina mouth piece by 45 degrees to make it more comfortable to play. I printed my ocarina at 80.7% scaling (Eb tuning) so I…
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
90 degree corner for 2020 aluminum extrusion. I used this for my diy printer.
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
All on one plate. Main body printed on side , bracket layed flat, both with tree supports. Hardware required: M5x60 hex bolt DIN912 x 2 M5 connecting nut DIN6334 x 2
Wydruk około 16,12 €–19,71 € nettoWstępna wycena jednego wariantu
The mounting plate allows the excellent charger holder for the JOYCUBE Fischer e-bike charger from Wolf Flow/db1337 to be attached to a grid with M3 screws and nuts. Print the mounting plate in STL orientation in 0.2-0.3mm layer height…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Swinging J1772 bracket that allows you to lay the charger flat against the wall and swing it out as needed. Printed in PET 40 % but may go higher depending on longevity. Prints in place as one object. A little crunchy in the joint as the…
Wydruk około 10,42 €–12,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Protection of photovoltaic cables with a diameter of 6-7 mm against penetration or breakage when routed through wall edges, metal roofing, etc. I recommend printing with supports in vertical position. CZ: Ochrana fotovoltaických…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Il me manquait cet élément pour terminer ma vedette de police. Impression en PETG avec filament clear. Hélas la couleur et la transparence ne sont pas là, mais la fonctionnalité est respectée J'ajoute le fichier fusion si vous avez…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cover for UGREEN 130W Autoladegerät .
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Kings awnings have a habbit of getting droopy, as thier knuckles can bend a bit over time, which leads to the bag they live in when stowed riding lower than when first fitted. In my case, as it was mounted on my van, it would bash into…
Wydruk około 5,26 €–6,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Did you mount your Camera on the wall to record your work? The camera need a little extra tilt? Print this! In my case the DSLR camera is monted to record Youtube videos on our engineer station. But the camera was not in the right angle,…
Wydruk około 2,82 €–3,45 € nettoWstępna wycena jednego wariantu
Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…
[5 Dec 2023 short update] Known Issues: A.) This is designed for K1, I don't own K1 max, not sure if it will fit, there are K1 max version 270 hinges done by others also available on Printables. B.) PLA will work, but recommend PETG or…
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
Made this 90 degree bend to prevent the bowden tube on the K1 Max from rubbing under the lid, it also provides a cleaner movement of the cable chain. It's loose enough that it shouldn't cause any problems with under extrusion. Made…
Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…
I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…
This door holder is specifically designed for the Elegoo Centauri Carbon enclosed 3D printer. It allows you to securely prop the front door open at a fixed 10-degree angle. Purpose Provides slight ventilation for the print chamber when…
This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…
Wandhalterung für den Bosch 4A e-Bike Charger (Smart System ab Modelljahr 2022 BPC3400), Befestigung mittels 2 Senkkopfschrauben ø 4mm.
Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…
This is a remix of: https://www.thingiverse.com/thing:3644062 I liked the design of the original bracket, but wanted to try and make it a little smaller. This design is about 50% scale of the larger bracket. Included is both a 2 bolt and…
Still requires print supports on the part where the hot wheels track clips in.
TL;DR: Print the top, print one of the two bottom parts, and optionally print the cable holder. This heatbed cable cover and holder is based on the original Prusa part. It keeps the exact dimensions for hardware, LED viewing window, cable…
My own Hot Wheels track piece, Something I felt was missing from what is sold. Works with most cars at medium speed, just don't overdo it. Connects to any Hot Wheels track with a connector, both my connectors and the Mattel ones work.…
!!Important!! I highly recommend straightening the Z-Axis gantry before doing this mod, as explained here . The Ender 3 V3 SE/KE faces a significant issue with a wobbling frame, which can result in serious quality problems, especially at…
I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…
Based on the original Thing from K_Lab - thanks for the source Fusion 360 files: https://www.thingiverse.com/thing:3533859 and the remix from Theo Tinjum:…
Needed a grip that was more vertical. This works. Print it upside down, minimal support need for grip cutout area. If someone is more capable than me, it needs some texture added. I printed with low resolution to simulate texture. It's…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…
The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
Material: PET-G Layer high: 0.2mm Perimeters: 4 (5 for connector) Infill: 30% Cubic Holes for connectors are blind because of reliable printing. Drill them by 5-5,5mm drill. Big square is modifier - you can set bottom layers to 0, it…
need 4x m3 insert nut
This is a drill guide to aid in 90 deg and 45 deg drilling. Diamond cutouts are on either end to aid in finding measurement lines. The 45 deg guide will intersect at the the center line. All holes accommodate imperial bits. Please be safe…
Basic 45° small double switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT…
i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…
Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…
Modern and functional desk accessory designed for FDM 3D printing. The 45-degree tilted body and geometric perforated structure provide quick access to writing tools while maintaining a clean, contemporary aesthetic. ☕ Personal &…
Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…
90 degree PTFE tube guide. Together with the guide, I used https://www.crealitycloud.com/model-detail/657e19d8937557724252afab , reducing the height to 50% and https://www.printables.com/model/734259-creality-k1-k1-max-ptfe-tube-holder I…
Holder for Type 2 charger cable where the cable come in from the side, better fit how the cable is looped around the holder. You may want to print this with supports. Edit: I've added a picture of the areas that you may want to have…
This is just a remix of cuzzea's work, eliminating the colder temps that won't work for my PETG (Hatchbox). This one goes 220-260, use cuzzea's exact instructions for setting up the post processing script. Nothing changes except the top…
This project had two inspirations. The “Serious Clamp It Square” by J-Max is amazing. https://www.thingiverse.com/thing:1306832 This thing is stiff, which is needed for clamping. It is large and feels strong when you hold it in your…
Material: PLA or PLA+
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
The existing spool holder of the ender 3 V3 SE added to the shaking of the Z-axis to reduce shaking and enable better filament supply by rotating the direction of the spool holder 90 degrees. material 1. M5 nuts x 2 2. M5 x 15mm = 1, M5 x…
This is a remix of the right hinge from MagicShrimp's 270 degree hinge for the Elegoo Carbon Centauri. It is literally a mash of the hinge and the right holder from Julien Mairy's cover and bed holder. I wanted to have both, but they…
360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm
Device for 45-degree chamfering of plasterboards in drywall. Small and convenient to useAll trapezoidal blades up to 62mm fit. Chamfer width +- 6mm. The nut works easily after the first screwing in. In the slicer, the model must be…
I love the Lego Wreath and I am in the process of printing more for Christmas. I needed a jig to align my 6 segment wreaths at a perfect 45 degrees. I traced the original Lego wreath branches to make this jig.
Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip
Tilt Blocks For Your Bambu Lab A1 Tilts the printer 20 degrees I use simplyprint as my software for auto ejection Print with at least 3 walls and 10% infill
Basic 45° small switch track compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. Support: NO, Infill: 15 %. CHECK OUT other…
This model is compatible with the lego system.
Fits a 66mm or less wide common sharpening block. Fixed at 17 degrees for easy operation. Very hard edge knives can take a 15 degree edge, cheaper common ones last longer at 20mm. 17 is a compromise angle used by many for a wider variety…
My new keyboard came without keycaps so I decided to make some. Through a lot of trial and error, I learned how to create some nice keycaps - and that's what this model does. You can learn more about how I arrived at this point and some…
Reupload of a model from Pavel_Sticha (https://www.thingiverse.com/thing:3831760).
I read somewhere that people have had success with removing ghosting/belt lines by positioning the X and Y gantry at 90 degrees during the belt tensioning process. I decided to make a quick model to help hold the gantry in position during…
Corner covers: Cover up the gap left from removing the hinges for a better chamber seal. No additional hardware required, just reuse the screws used to hold the original hinges in place. Magnetic Door Latch: Uses 2 8x3mm magnets to hold…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
The 90-degree clamp is an essential tool for any woodworker. This 3D printed clamp is designed to hold pieces of wood at a perfect 90-degree angle, making it ideal for creating precise joints. Whether you’re building picture frames,…
Achieve your ideal setup with the Corner Kit. Use the Corner Kit to angle your Video Doorbell Wired towards your walkway, so you can improve your motion detection and get a better view of visitors coming to your door. Designed by Thom…
I made a fancy fan cover which is designed to optimise airflow. Testing video below explains more! You might also be interested in the 140mm fan insert for tights/pantyhose .
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And so I set in motion the plan to print some honeycomb bits to fit on my wall. So I started out paramaterizing the honeycomb to fit. And I saw someone made pretty…
TLDR:- New Hinge design (V3) allows for quick change V3 face plates/covers while Using V2 additional V2 components for the hinge assembly. New optional tools added. Also includes post processing and detailed assembly instructions (with…
A pottery clay tool designed for quick and precise cutting of clay at 30°, 45°, and 60° degree angles. Things you will need: 4x 4-40 brass heat set PEMs 4x 4-40x.25in screws An old guitar string or stainless steel braided wire both work…
Víčko plechovky piva Pilsner a Kozel , Radegast, limonáda , Pilsner and Kozel ,Radegast , limonade beer can lid
I couldn't find the 90-degree adapter for the Bestway Power Steel pool so I made one. The threads for the connection for the pool seem to be non-standard so I custom-made the threads. The threads are ~109mm in diameter. The 90-degree…
This model is compatible with the lego system.
The attachment for the charger is self-explanatory. Remove the rubber feet and then insert the holders and screw them tight. Die Befestigung für das LAdegerät ist selbst erklärend. Die Gummifüsse entfernen und dann die Halter reinstecken…
I accidently broke my feet on my keyboard, Logitech K850. I couldn't find replacement parts so I modeled these using SketchUp and created the STL files for both the 4 and 8 degree feet. Support is needed for the the pin alone.
Zeros to about 50m but Elev. and Windage is adjustable. Requires: 1x M2x~10mm 1x M3x~23mm + nut 2x M5x~25mm Not all picattiny is manufactured within the same tolerances thus sanding may be necessary.
I recommend scaling up to 1" on the sides (166%).
I found that all the filament holders out there seemed too complicated for what I needed. So, I designed my own. I designed with a lattice structure so you can get away with the lowest amount of plastic but is still pretty strong. It is…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
Orient the parts so the flat cut end is on the bottom than print with no supports.
The door on the Snapmaker U1 doesn't open much further than 90 degrees by default, and I wanted less restrictive access, so I put together this 180-degree door hinge. It uses compression-style fittings to hold the glass door to the hinge…
