773 modeli
I hate any bulk to my keys. So, I only carry around the keys that I need. This buckle acts as a quick disconnect for some of your keys. Maybe for 1 key or for a whole set. Colour code them even! These are both smaller and lighter than the…
Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA
Disco Elysium : Harry Du Bois or Stoner Jesus?
Náhradní díl přetvořen podle originálu. tisknuto v PETG Spare part according to the original printed with PETG.
100x160mm sign, with atom art. The recipe for the cocktail version of the atomic discombobulator involves lab ethanol and a spritz of superheavy water. Given that tritium and derivatives are expensive and often subject to radioactive…
Organiza tus discos en el taller y lleva contigo únicamente el conjunto que necesitas. El Organizador Portátil para Discos de Esmeriladora es un organizador portátil para discos de 4½" de esmeriladora angular. Está compuesto por un Wall…
Update June 1, 2023: After 3 years of being in direct sunlight and intense Texas heat this replacement part is still holding up. I've probably had this solid brass shutoff valve and quick connect for 30 years. So when the knob for the…
Adapter to mount an Arrow dual-band antenna on a Discovery Drive azimuth/elevation rotor. The handle of the Arrow goes in the slot, and the base plate bolts to the Discovery Drive's rotor plate. I used a prototype Discovery Drive with…
Update: I made a better autoretracting system. This Airbuffer was not reliable enough. Please consider these files as obsolete/discontinued. But if you find this useful in any way or other projects you may use them anyway. That’s why…
These are a selection of phone accessories that use my UTQD system. Just unclip the accessory to use Magsafe freely. The .stl and .step files are included for easy modification. Check out the first phone case compatible with UTQD for an…
Update 29.05.2023 . I do not use this design anymore because I made a superior model shortly ago. I recommend not using this model any longer and suggest you use my best nozzle cam (and still the most affordable solution) . Problems with…
I don't keep my power supplies mounted to the back of the enclosure, but needed a way to quick-disconnect from the printer. Slanted connection keeps it out of the way of the heat bed cable. Requires one pair of Anderson PowerPole…
A simple replacement part for a missing cut playwood piece from a "Deep Sea Discovery" Kiwi Crate, specifically a wooden round with one side flattened and a hole to admit the spacer peg. Print instructions Printed with generic PLA (Inland…
This universal connector allows the use to connect any compatible accessory to a mounting point with a thickness of at least 2mm (aka the maximum thickness of iPhone cases for Magsafe compatibility). There are two options available for…
This is my entry for the CMF Phone 2 Pro contest. The contest inspired me to create a mounting solution that still allowed Magsafe to function. So I targeted a thickness of 2mm, and came up with the idea for this connector while on a…
Hose Couplings for Air ¼'' male fitting threads into bottom use clay, playdough, or rubber gasket around edge contacting boat use thread tape on print between air fitting apply soapy water to boat or welds in question apply printed nozzle…
To be clear, I don't intend to type underneath this, it's only for the cat. I'm using an external keyboard. Shown printed in Prusament Army Green PLA: good for keeping it bendy, which my cat finds unsettling to step on. Hopefully this can…
This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…
Due to the way the Bambu Lab AMS Buffer is designed, disconnecting the PTFE tube and the control cable can be difficult. The tube coupler's release ring is recessed inside the buffer, and the cable's release clip is between the cable and…
It seems as if this does not work flawlessly for everyone anymore. At the moment, I do not own a Bambu Lab Printer - therefore this project is no longer continued/updated and has not been updated for quite some time. For safety measures,…
UPDATE: There is now an even BETTER version that uses a twist-lock mechanism so you don't have to bother with the magnets: https://makerworld.com/en/models/487870 UPDATE: These files have been superseded by V2!! See update notes below.…
Here are the modified files I used to print out the awesome Star Trek Discovery phaser that was beautifully designed by ajethridge . This has been sized to a nice fit--not too big but not too small. It is 22 cm from back to front. The…
OEM style Land Rover Discovery 1 & 2 Cup Holder I made this cup holder for my disco 1 manual transmission, it consists of three parts. The lower part can be printed in two pieces (lower 01 and lower 02) and glued together or printed as…
Remove the wheels as in the pictures (see picture 4 & 5) Space shuttle : Fixed with wall plug (see picture 8) and Double-Sided Tape for nose gear (see picture 6) Slide the front part (red axle) into the “shuttle hook nose gear” (see…
Ein sehr nützliches Tool und mein Dank dafür geht an Jody. Ich habe es etwas angepasst, indem ich einen 5 x 3 mm Magneten eingelassen habe. Die Öse habe ich anders platziert und die Schräge für den Stecker abgeändert, da sich mein Stecker…
I couldn't find a model that would let me mount and hide my Disco-on-a-stick and Daylight-on-a-stick LED strips and hide the lights behind a tidy diffuser, so here it is. The provided Step files are designed for a Voron 2.4 350, but I've…
This little tool is a great help if you need to diconnect the PTFE tubes of your A1 (mini) AMS. Just put it around a tube, press it down and pull the tube out of the printers hose bracket as shown on the pics. Material: PLA/PETG…
Added a hole to hang it from a pegboard and negative text for identification.
Bambu AMS Disconnect Tool remix without text and holes
Here is a remix of the awesome Discovery communicator kit designed by mooslug . I love how the model is accurate so I wanted to make it as a static prop without electronics. I solidified the body and made the flip-up hinge mechanism…
I didn't want to spend 12 dollars and wait for shipping, so I whipped this up based on my fuel lines and images online. It took a few tries to get the width of the central ‘sleeve’ the in the sweet spot. Thin enough to fit, but thick…
I needed a tool to disconnect the fuel line quick connect fittings on my Trailblazer. This one worked great and should work for any GM or other vehicle fuel lines. Designed for 5/16 (8mm) but worked on both size lines in my 2004…
Land Rover Discovery 2 window switch cover. There are two versions - with or without heating switch holes. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Supports: No Resolution: 0.2
Land Rover Discovery 2 horn button cover. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Brim: No Supports: No Resolution: 0.15 Filament: any ABS, ASA
I didn't make this scan; I found it here https://www.myminifactory.com/object/discobolus-at-the-british-museum-london-7896 (BTW their Scan The World program is fantastic!). I believe this discobolus is a modern retake because the head…
This is a remix of my remix. My original remix removes the text and the holes as I didn't need them. This remix makes the model even smaller.
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
This expandable fidget toy is inspired by the iconic disco ball shape. The sphere is built from multiple articulated segments that expand and compress smoothly, creating a satisfying kinetic motion when handled. The surface is divided…
Este es un adaptador de discos duros de 3,5 pulgadas a 2,5 o a SSD. He diseñado este adaptador con todos los soportes posibles para tornillos. Es adaptable a todas las cajas que vengan con huecos para HDD grandes. En el extremo de los…
This can be printed out and used as a replacement for the horn button in the steering wheel of the Land Rover Discovery 2. Use either PETG or ABS for best results. Choose a print orientation that will maximise the strength of the clips.
This is an insert / organizer for Terraforming Mars: Ares Expedition, along with the Discovery, Foundations, and Crisis expansions, in the larger Kickstarter expansion box (note: this does not fit in the retail box). It has no lid lift,…
This is a remix from the excellent and highly detailed model by Burning_Bridges : https://www.thingiverse.com/thing:3067279 The original obj file was not printable as-is. So, I did extensive repair to it to make it printable. I have also…
Remixed so its a bit taller. 3mm to be precise. Works great on my 2001 mazda miata/mx5
Discord Keycap printed with white and purple
You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…
Land Rover Discovery 2 carling switch bracket. There are two version - with or without double-sided adhesive tape. For better fixation use double-sided adhesive tape and "DSBT spring". Frame is bonded by aceton using holes in the body.…
Bambu AMS Disconnect Tool with 5x3mm magnet for dual color print Remix of both versions (body from remix, letters from original) for dual color print and with an inset for a 5x3mm magnet. Thanks to @Jody and @HaraldGeisler for preparatory…
Discovery 2 - wheel hub and nuts cover for use with steel rims.
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
Trays for discovery cards (sleeved) and injury cards (sleeved and non sleeved) for Awaken Realm's ISS Vanguard boardgame. With my basic design skills, they help keep the cards nice and organized at top edge of the exploration book.…
See “ Differences of the remix compared to the original” section for changes description.
I needed a quick disconnect to be able to swap my dust collector from one mobile tool to another. I could not find what I needed on PrusaPrinters, but I found one on another site that unfortunately did not fit properly. I redid it to fit…
I needed a 5/16 fuel line quick disconnect tool and tried to print a couple that other people designed. None of them worked so I made my own. Not fancy but they do work.
Part numbers: DBC101690, AWR6711, DBC101680, AWR6712 --------------------------------------------------------------------------------------------------------------- On thingiverse is similiar model, but without locking hook. I had done…
This is a reinforced replacement part. I printed it for my father's washer six months ago and it is still in use without problems For model: K 2.03 / T-50 and others. KARCHER Water Inlet Elbow (discontinued). Part number: 5.063-984.
This is a refined version of the model I'm actually using - this model has the shuttle sitting bit closer to the wall than you see in the picture. For strength, I recommend that you print in PETG 20% infill and in the orientation you plan…
See that girl Watch that scene Diggin' the dancing queen This disco dance floor snap fits perfectly onto the B Drive pulley on a Voron Trident and allows you to mount a small rubber duck or some other mascot of your choice to add a little…
This is a card holder for the boardgame "ISS Vanguard" to be placed on the left top side of the Planetopia book.
This is a Kit-Card for the USS-Discovery. Print with a layer height of 0.2mm, pop the parts out of the card and assemble your very own mini Discovery :) While other Star Trek cards result in models that are just a bunch of flat pieces…
I added a radius to the PTFE release end of this tool in hopes of making it stronger. Background: The Bambu AMS Disconnect Tool designed by Jody is fantastic and I've been using it regularly for releasing the PTFE tube on by troublesome…
llaveros discos de 45lb 20.4kg y star gym para gimnasio
This is one of the first models I made for 3-D printing. These tools are used to break MC4 connections by simultaneously pressing two tabs that hold the connection together. Print with the ring flat on the print bed, and cut off the…
This is the inner bracket for the switches in the center console with four window switches, two heated seat buttons, and a rear window lockout button. The outer trim panel has already been created by Hyta and can be found here:…
Lift kit for Disco 3 SE or HSE (with air suspension), similar to Johnson Rods . Adds 2 inches to your vehicle height. Print instructions I'm using this kit on my D3 for like 20k km and it still works like a dream. Not as great as XLifter…
I designed this as a keychain but you could scale it up for use as a quick disconnect for many purposes. The release button is flush with the body so it will not disconnect accidentally. The engagement between the parts should be pretty…
Here you go. The 32nd century badge that has it all. PADD, tricorder, communicator, personal transporter, etc. Revision April 28 2024 - Revised the whole model to look closer to the screen prop. Lengthened and given more depth. Was going…
Made a fairly faithful recreation of Harry Du Bois' service pistol from the Disco Elysium game. Some creative liberties were taken, but the result is mostly game-accurate. Assembly requires: 1x M2x20mm countersunk bolt 1x M2x25mm…
I have just quickly added screw holes. I don't trust tape.
DaylightDiscoRainbow-Stick-Mounts 2020 Mounts for Daylight/Rainbow/Disco on a stick/XXL/Matchstick that has a nice diffuser and looks prettyish... well, better that PCB's bolted to your extrusions V2 update includes design change to use…
Dimensions you can set in PrusaSlicer by scale %
Remixed from mapleleafmakers for the standard disco on a stick used in 250 and 300mm V2 and VT
I want to be able to easily remove my printer from my enclosure for maintenance. While the collets on the MMU3 make it quite easy to remove the PTFE tubes, I worry that it wears on the tubes and/or collets on every removal and insertion.…
Here's my easy print version of the Disco badge style. I made the face flat instead of rounded for easier printing. Uses 6x2mm magnets. The file abbreviations are C=command (gold), S=science (silver), O=operations (copper), and M=medical…
Magnet clip on the back
Props show the emitter head and middle part, Discovery_Phaser_Mods_-_4_emitter_4, rotates. Did a quick part sketch using Prusa Slicer cylinders. This is why you have to open the 3mf file so the negative volumes will create the holes in…
This is a series of slide-together trays, to store and organize the Makedo Discover set of cardboard box construction tools. https://www.make.do/collections/all-products/products/a0126-discover The "SCRU"/"SCRU XL" drawers are…
Playmobil discontinued castle battlements based on Playmobil 3666 compatible with original Playmobil parts. Raft can help for castle battlements connector Support is not necessary but i have used it for my samples.
This is a remix of the original Bambu AMS Disconnect Tool by Jody. I have only made a slight change for this remix to add a cutout for a 6x3mm magnet to all the tool to be stored directly on the back panel of the X1. The magnet is a press…
This is the same tool, but with the letters flush with the rest of the tool.
Few hints for Land Rover Discovery II sunroof repair: I recommend silicone grease for rails parts. Use butyl tape as outer sunroof to car body seal. I used this tape also for sealing the four window nuts. Seal drain corner with quality,…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
Remixed to fit MC4EX connector, which is slightly smaller than a regular MC4. Take a look at the pics to see an example. I recommend printing in Nylon or PETG. I also added a hole so you can put a key ring on it, and clip to a carabiner…
This is a lowpoly remix of the Discus Thrower (Discobolus) sculpture from "Scan The World". The sculpture was originally made by sculptor Myron of Eleutherae dated circa 450 BCE The .gcode file has fairly robust supports because the model…
I forgot where I got the files, so I can not link the original, if you know, please send me a link, and I will update the description. I am not trying to take credit for something I did not make myself from scratch. Edit: Bryan reach out…
The Discobolus by Myron is an ancient Greek sculpture completed at the start of the Classical period in around 460–450 BC that depicts an ancient Greek athlete throwing a discus. The model is a 3D scan of a small sculpture by a friend. He…
I had a place for all my other tools but my AMS disconnect tool was just floating around. It almost fit in the glue stick holder so I just squared it off in Fusion 360 to better hold the AMS disconnect tool and printed it off. Now it has…
This is a model of the Discovery Space Shuttle optimized for Resin Printing. This is the 3d scan from the Smithsonian Air & Space Museum of which I give full credit. This model has very fine details that cant be printed with a normal FDM…
I was annoyed by the huge key, which prevent the cover from closing. With this smaller key, the cover still doesn´t close completely. But for me that´s enough to easily load my motorcycle to my Knaus Sport & Fun caravan. Print Settings…
This model does not work and is currently not in development. I made this some time ago, because i wanted make my own cheap red dot sight. https://www.tinkercad.com/things/jTnmEr25lEZ-airsoft-reflex-sighteotech-512-prot TLDR: bad idea If…
Update - I added .030" to the o-ring groove diameter so it works better with a -111 o-ring. This will no longer work with Gardena's apparently proprietary o-ring. This is a precisely copied male plug for Gardena's quick disconnect system.…
This exhaust duct attaches directly to the back of an xTool P2, replacing the existing duct. It lets you fit the whole machine closer to a wall and vent the exhaust left or right. There is a feature for adding a zip-tie to secure to the…
This tool is for power steering & transmission lines on 1999 through 2006 BMW 3 series and X5 (E46). Compare it to CTA tools 3466. It works by compressing the quick release ring, allowing you to disconnect the hoses easily. I added a 13…
I use the continuous shelf to put my Cobi tank models on display. Depth is now at about 17.5 cm.
These parts are similar to Lisle 37000 or Harbor Freight 63959 . Why buy a set when you can print the one you need? Fitting size is marked on the part. Some complaints about the HF version is that the opening is too narrow, so these parts…
Public domain model of the Space Shuttle Discovery, from the collection of the National Air and Space Museum. Originally uploaded to the Smithsonian 3d digitization archive .
Space Shuttle wall mount I redesigned the model from JLevin to print it without support. Print settings: PLA / PETG (recommend) min. 20% infill To fix it on the wall, I used screws with a 5mm diameter. I also recommend some higher angle…
Coupris Kineema from Disco Elysium . Based on the concept art and the in-game model, then simplified a bit to make printing easier. I am using it as wargaming terrain, but I think the model is detailed enough to work for dioramas as well.…
Included in the attachments is the parametric Fusion 360 design and the label design
settings quality 0.2 top/bottom layer 5 layer: line 3 infill: density 30% support: only Bild plate material: PETG or ASA or ABS build plate adhesion type: skirt
