P
PrintablesBeaver
Desk Mount Headphone Holder / Mount / Clamp
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
- Pobrania
- 28 802
- Polubienia
- 4455
- Ocena
- 4,92
Wyniki wyszukiwania: dp
8210 modeli
P
Printablesprntmkr
Earbuds Cleaning Tool V2 – Durable & ergonomic earwax remover for in-ear headphones
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
- Pobrania
- 5091
- Polubienia
- 1289
- Ocena
- 4,92
P
PrintablesJosef Průša
Deadpool Christmas ornament
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
- Pobrania
- 4882
- Polubienia
- 1111
- Ocena
- 4,79
P
PrintablesLayerCake
Headphone Stand
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
- Pobrania
- 3537
- Polubienia
- 278
- Ocena
- 4,94
P
Printablesiczfirz
Deadpool Multicolour Remix for MMU and Palette
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool from Eastman. Got his permission to release this MMU remix version. Sliced with PrusaSlicer and timelapsed.…
- Pobrania
- 3372
- Polubienia
- 1040
- Ocena
- 5
P
PrintablesAlejandro Argandona
Duck Headphone Hanger
Made this for my sis to hang her headphones. A lot of hangers are great and waste less filament, but I wanted to make her something special. Holds my big MDR-Z7s no problem, you could scale down if you have smaller cans. You can fix it to…
- Pobrania
- 2411
- Polubienia
- 538
- Ocena
- 4,97
P
PrintablesCalebTimoteo
Iron Man Hand - Headphone Stand (Decoration)
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
- Pobrania
- 2218
- Polubienia
- 531
- Ocena
- 4,33
P
PrintablesJakub Kříž
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
- Pobrania
- 1853
- Polubienia
- 136
- Ocena
- 4,88
P
Printablesflux_capacitor
FLSUN V400 golden PEI buildplate texture for PrusaSlicer
This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…
- Pobrania
- 1576
- Polubienia
- 47
- Ocena
- 5
P
PrintablesAMPDesignworks
Tweaked Headphone Holder Desk Clamp
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
- Pobrania
- 1412
- Polubienia
- 169
- Ocena
- 4,89
P
PrintablesXavier Marquet
Headphone Stand V2
New version of my headphone stand. It is taller, thiner et better in every way, I think. It is easy to print (no support) Caution, it just fits on the build volume of the PrusaMK3.
- Pobrania
- 1344
- Polubienia
- 96
- Ocena
- 4,97
P
Printablesmakermac
Westone IEM Case with Flush lid / Headphone case
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
- Pobrania
- 1339
- Polubienia
- 145
- Ocena
- 4,83
P
PrintablesDJK
Bionic Headphone Stand (Generative Design) by David Kaden
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
- Pobrania
- 1249
- Polubienia
- 187
- Ocena
- 5
P
PrintablesTriple G Workshop
Life-Sized Deadpool Head (Eastman)
Deadpool Head Surprised Version https://www.printables.com/model/350054-life-sized-deadpool-head-surprised-version Deadpool Head Angry Version https://www.printables.com/model/350043-life-sized-deadpool-head-angry-version This version:
- Pobrania
- 1226
- Polubienia
- 180
- Ocena
- 5
P
PrintablesJohn
Headphones holder
Simple headphones wall mount with hidden screws. Print instructions I would recommend you to use some strong filament but even PLA is strong enough. Also to make holder more durable use 3D honeycomb infill on 30% or gyroid on 40%. The…
- Pobrania
- 1030
- Polubienia
- 80
- Ocena
- 4,93
P
PrintablesJakub Kříž
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
- Pobrania
- 812
- Polubienia
- 135
- Ocena
- 5
P
PrintablesJakub
Sandpaper holder 125mm
Sanding paper holder for eccentric grinder 125mm Mounting is by means of two screw holes. Print Settings Rafts: No Supports: No Infill: 20% Filament: PLA or whatever…
- Pobrania
- 736
- Polubienia
- 142
- Ocena
- 5
P
PrintablesDylan
Snapmaker 2.0 3DP Cooling Fan 5015 Replacement (Updated)
Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…
- Pobrania
- 716
- Polubienia
- 60
- Ocena
- 5
P
PrintablesDrakein3D
Apple Airpods Max Headphone Hangar
Apple Airpods Max Headphone Hangar Printed in Prusament Recycled PETG .2mm layers 20% gyroid infill Printed flat on the closed back I carefully measured and modeled a hangar for Apple Airpods Max noise-cancelling headphones. When in…
- Pobrania
- 679
- Polubienia
- 70
- Ocena
- 4,8
P
PrintablesMindCubby
Miniature Over-Ear Headphones for Labubu - Print-in-Place & Satisfying Snap
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
- Pobrania
- 620
- Polubienia
- 63
- Ocena
- 5
P
PrintablesPeter Farell
Deadpool : Wrexham FC
Deadpool : Wrexham FC Should have given him some cleats. Feel free to accessorize and share.
- Pobrania
- 599
- Polubienia
- 147
- Ocena
- 0
P
PrintablesJoshua Symonds
Headphone hanger with hidden wall mount
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment. Choose from a smooth mounting bracket (I use this, attached by a 3M Command strip trimmed to fit) or a bracket with a single screw hole for a more…
- Pobrania
- 580
- Polubienia
- 80
- Ocena
- 4,86
P
PrintablesBatman3D
Yoshi headphone holder MULTI COLOUR
Printed at 0.3mm layer height on a MK3s and MMU2 with 3DQF PLA filament. I used support on build plate just for the fixings on the back but probably not necessary.
- Pobrania
- 525
- Polubienia
- 136
- Ocena
- 5
P
PrintablesCustomiz3D4U (C3D4U)
PS5 Controller and Headphones Stand
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
- Pobrania
- 501
- Polubienia
- 81
- Ocena
- 0
P
PrintablesGrillparty
Grinding block - Sandpaper Belt (303 mm x 40 mm)
Very practical sandpaper holder. If the sandpaper is used up, the sanding belt can simply be moved a few centimeters. The sandpaper belt holder consists of 3 printed components: Block Tensioner Eccentric Other accessories: Cylindrical pin…
- Pobrania
- 458
- Polubienia
- 106
- Ocena
- 5
P
PrintablesTriple G Workshop
Life-Sized Deadpool Head (Angry Version)
Deadpool Head Original Version https://www.printables.com/model/350015-life-sized-deadpool-head-just-the-tip Deadpool Head Surprised Version https://www.printables.com/model/350054-life-sized-deadpool-head-surprised-version Deadpool Head…
- Pobrania
- 416
- Polubienia
- 52
- Ocena
- 0
P
PrintablesNexl
Sandpaper disc magazine 🪚
🟨 Material: Prusament Mango Yellow PETG it looks like a 🐝 DeWALT yellow ⬛️ Layer: 0.3 is enough
- Pobrania
- 374
- Polubienia
- 89
- Ocena
- 5
P
PrintablesPenguinNinja
Grandpa's Birdhouse
This birdhouse is a special gift for my Mom, inspired by the one my late Grandfather made, which has since decayed. She cherished his birdhouse, so I wanted to create a durable version that she can enjoy for many years to come. Before you…
- Pobrania
- 364
- Polubienia
- 98
- Ocena
- 5
P
PrintablesKcallit
Schleifklotz / Schleifpapierhalter / Sandpaper holder
Ich habe hier einen Schleifpapierhalter für meine Baustelle konstruiert. Die obere Klemmplatte besitzt Noppen, welche sich durch das Schleifpapier bohren, welche den halt nochmals verbessern. Die Schrauben habe ich als Rändelschrauben…
- Pobrania
- 354
- Polubienia
- 41
- Ocena
- 5
P
PrintablesMyHotPL8
3DP BANJO: 5-string 3D-printable Mountain Banjo (v2.2)
Version 2.2 now available Minor errors fixed (see version release notes below). Assembly Guide finished! The assembly guide has now been been completed, containing 38 pages with over 60 diagrams to assist in creating the banjo from start…
- Pobrania
- 348
- Polubienia
- 110
- Ocena
- 5
P
PrintablesMichal Blazek
Headphone Stand
Stable Sony WH-1000XM5 headphone stand with charging cable box. The upper part is designed exactly for the Sony WH-1000XM5, but it will certainly fit on other headphones. The upper part is printed separately due to the height of the…
- Pobrania
- 324
- Polubienia
- 41
- Ocena
- 5
P
PrintablesSaddamCZ
Drum rack headphone hook (multiple versions)
A headphone hook for 1.5" (38.1 mm) drum rack tubing (common size of Roland e-drum racks). You can choose between two designs ("Headphones" labeI in writing or a simple icon). It clamps onto the tubing using two M6 bolts. UPDATE: Added…
- Pobrania
- 315
- Polubienia
- 54
- Ocena
- 5
P
PrintablesMatyáš Flek
Universal simple headphones holder
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
- Pobrania
- 304
- Polubienia
- 32
- Ocena
- 4,5
P
PrintablesTriple G Workshop
Life-Sized Deadpool Head (Surprised Version)
Deadpool Head Original Version https://www.printables.com/model/350015-life-sized-deadpool-head-just-the-tip Deadpool Head Angry Version https://www.printables.com/model/350043-life-sized-deadpool-head-angry-version This version:
- Pobrania
- 274
- Polubienia
- 48
- Ocena
- 0
P
Printableskjbturok
Remix PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY WITH USB PORTS
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
- Pobrania
- 272
- Polubienia
- 27
- Ocena
- 0
P
PrintablesDobi
Headphone holder
It is approximately 22 centimeters in height.
- Pobrania
- 265
- Polubienia
- 20
- Ocena
- 5
P
Printablesleonid nahimovich
headphone CAT ears
! attention ! this print have 2 files that should be printed separately if you want different colors v1 is the shell i prefer it to be black v2 is the inner part the inner and outer part do fit each other with a little Preasure but i do…
- Pobrania
- 246
- Polubienia
- 26
- Ocena
- 0
P
PrintablesHankel
Headphone hanger
A headphone hanger to mount under a desk with a large cord hook for chunky cords.
- Pobrania
- 245
- Polubienia
- 22
- Ocena
- 5
P
Printablesm1che1
SSUPD Meshlicious ADT Link Cables Bracket (DP and HDMI)
This bracket is designed for the SSUPD Meshlicious, to provide a more comfortable access to the video output ports. We have optimized the bracket for ADT Link DisplayPort and HDMI cable. You could use the bracket with the following ADT…
- Pobrania
- 235
- Polubienia
- 18
- Ocena
- 0
P
Printablessternli27
Makita DPJ180 Plate Joiner Flachdübelfräse Lamello Box
Printed in two halves, because of the large size. No support needed. Connected by 2.5x8mm cylindrical pins and/or glue. There is a small gap when the box is closed. To make sure no parts escape from the organizer when the box gets tilted,…
- Pobrania
- 234
- Polubienia
- 57
- Ocena
- 4,5
P
Printablesifon
Deadpool Confusion Face Expression
This is a cool face to have exposed in your bedroom or any other place, in my case I attached it to the front of my PC, so now everytime I look to the right it looks like I did something wrong o.O
- Pobrania
- 224
- Polubienia
- 26
- Ocena
- 5
P
Printablesmaxmar
Larger baseplate for Makita RT0700 trimmer (Vergrösserte Grundplatte für Makita RT0700 Fräse)
Larger or extended baseplate for the popular Makita RT0700 trimmer/router or similar models with the same built and dimensions like Katsu. Additionally, a knob is available which can be mounted in three different positions and the…
- Pobrania
- 218
- Polubienia
- 32
- Ocena
- 0
P
PrintablesPeopleware
Bosch Cookit Ein-Hand-Griff Revision 2 / One-Hand Handle (DPGM 20 2025 001 171 5)
Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…
- Pobrania
- 217
- Polubienia
- 18
- Ocena
- 5
P
Printablesunixguy
Advanced Bionics Marvel Cochlear Implant headpiece cover
This is a plastic cover that goes on the Advanced Bionics UHP for the Marvel series cochlear implant processors. The originals are extremely brittle and cost a lot of money, therefore I want to print my own instead of buying replacements.…
- Pobrania
- 194
- Polubienia
- 17
- Ocena
- 0
P
PrintablesThorin Oakenshield
MVDP Cyclist Trophy
Cyclist Trophy created in honor of MVDP's victory today at the Milano-San Remo cycling monument . After an amazing finish, he defeated Tadej Pogačar and Filippo Ganna. Wonderful cycling! The model is going to the printer right now. A…
- Pobrania
- 192
- Polubienia
- 21
- Ocena
- 0
P
Printablesboecko
Parametric Ikea Skadis Board for MK3/MK4 Buildplate + SCAD-Customizer/Generator
Models This Model contains Skadis pegboard for the size of the MK3/MK4 buildplate with drillings for M6 screws customized pegboard Skadis pegboard in a triangle shape and the OpenSCAD-Files to generate your own sized boards.…
- Pobrania
- 190
- Polubienia
- 22
- Ocena
- 0
P
Printablesflof
Simple Headphones desk holder
Turn the screw to tighten Great for thicker desks
- Pobrania
- 181
- Polubienia
- 19
- Ocena
- 4,4
P
PrintablesMike Ant
Headphones stand / stojánek na sluchátka
A simple and stable desk stand for headphones. If you like the model, please give it a like. ❤ Jednoduchý a stabilní stolní stojánek na sluchátka. Pokud se vám model líbí, dejte mu prosím lajk. ❤
- Pobrania
- 178
- Polubienia
- 14
- Ocena
- 5
P
PrintablesFotoman
2 inch Disc Sandpaper Holder
I printed this in PETG as that was all I had. PLA should be fine as well. It is a long 17 hour print.
- Pobrania
- 176
- Polubienia
- 22
- Ocena
- 5
P
Printables4nthonylin
DPS5005 Case
A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…
- Pobrania
- 172
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMBart
Cat ears for Bose 700 Noise Cancelling (700NC) headphones
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
- Pobrania
- 171
- Polubienia
- 30
- Ocena
- 0
P
PrintablesGingerbread
Underdesk headphone/headset hook
Use 3.5mm Φ screws to attach it to the underside of a desk.
- Pobrania
- 171
- Polubienia
- 15
- Ocena
- 5
P
PrintablesBaloo 3D
BdP Halstuchknoten woogle (Germany guides and scouts)
No supports required for printing. I'm providing three models here (2 just with the same original proportion, and one improve for better details). One includes the complete knot, while the other is a diagonal version that conserves…
- Pobrania
- 154
- Polubienia
- 21
- Ocena
- 0
P
PrintablesRazelak
Skullcandy Crusher Evo headphone replacement arms
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
- Pobrania
- 138
- Polubienia
- 15
- Ocena
- 0
P
Printablessteve
DPSx power supply case
Case for a DPS5005 (or other variant) power supply module with power button, 4mm banana jacks and DC barrel jack input. Unfortunately the closing mechanism was somewhat of an afterthought and therefore requires 4 of the hooks to be…
- Pobrania
- 137
- Polubienia
- 33
- Ocena
- 4,5
P
PrintablesFantastic Plastic Person
Under Desk Mount for FiiO E10K Headphone Amp
Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.
- Pobrania
- 133
- Polubienia
- 12
- Ocena
- 5
P
Printablesquattro
Jabra Evolve2 65 Headphone holder for IKEA IVAR shelf
As I heard about the contest, I thought my other design (Webcam Cover) would fit perfectly into this category. unfortunately I had already published it shortly before the contest begun so I could not use it for the contest. Today I was…
- Pobrania
- 129
- Polubienia
- 29
- Ocena
- 5
P
Printablesfoxylion
Organizer for Sandpaper (125mm diameter)
A simple holder for sandpaper 125mm diameter. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Notes: Print with a 0.4mm nozzle at 0.45mm line width.
- Pobrania
- 116
- Polubienia
- 9
- Ocena
- 0
P
Printablesondrahlavac
Gridfinity tray for FNIRSI DPS-150
Simple gridfinity tray to store your FNIRSI DPS-150 DC power supply. The power supply fits snuggly halfway down in the tray and can be lifted up with no problems. You can store the alligator clips and other accessiories in another box,…
- Pobrania
- 98
- Polubienia
- 13
- Ocena
- 4
P
PrintablesOzzy The Artist
Deadpool Unicow Desk Organizer
Deadpool riding a Unicow and it's a desk organizer!!! Three part print; main part is three colour - please see included PDF for very important additional info. Print all three parts and glue carefully together. Please hit the like ♥and…
- Pobrania
- 98
- Polubienia
- 33
- Ocena
- 5
P
PrintablesTykwa
4.7 Liter ITX ASUS 4060 LP, Asrock B650i Case 500W HDPLEX
this is part specific, guaranteed fitment with… asrock b650i lightning, with IO plate removed asus 4060 lp with io shield removed and up to about 69-71mm cpu cooler clearance, I have used a IS-55 with a P12x25mm you want a 120mm fan for…
- Pobrania
- 92
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMarwis
Headphones holder
Hello, I designed simple heaphones holder. There are 2 versions. First (screw version) is for every desk and you can screw it with simple screw. Second version (Ikea Bekant version) is for Ikea Bekant desk,…
- Pobrania
- 86
- Polubienia
- 5
- Ocena
- 4
P
PrintablesPeter Farell
Lion Head Codpiece
Lion Head Codpiece Resize as needed.
- Pobrania
- 85
- Polubienia
- 35
- Ocena
- 0
P
Printablesollie
Snap-fit desk headphone stand.
A simple, easy-to-print desk-mounted snap hook. The original design is built for a 3cm desk, but you can change this directly in the slicer. The simple design snaps right onto the desk and has an option for padding if you are worried…
- Pobrania
- 78
- Polubienia
- 14
- Ocena
- 5
P
PrintablesFluffyDragonBear
Headphone Bear Ears
These Bear Ears attach to the headband of almost any pair of headphones. They only need lengths of 20mm Velcro (2 sided hook and loop that attaches to itself, commonly used for cable management) and attached around the band. They come…
- Pobrania
- 75
- Polubienia
- 21
- Ocena
- 5
P
PrintablesWith_Maltodextrin
ASUS ROG Strix G17 Laptop 240w AC Adapter Vertical Stand - ADP-240EB
Couldn't find one which fit the 240EB so here's a quick and dirty one. Friction fits close enough to stay in place and only contacts the printed part in small areas too keep cooling from being impaired. Use something other than PLA since…
- Pobrania
- 73
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMST8K
Deadpool Headset Hanger (Wall Mounted)
Do you love Deadpool? Do you love well-maintained headsets? Do you have a vertical surface on which to mount this hanger? If so, this is perfect for you. The triangle in-fill is done in PrusaSlicer, but I included the whole model if you…
- Pobrania
- 72
- Polubienia
- 21
- Ocena
- 5
P
Printableschrisebryan
Mostly 3DPrinted Heat Set Insert Press
This heat-set insert press is designed to be budget-friendly while still providing a functional tool. Most of the necessary components can be printed, and the 6mm rods can be sourced from old laser toner cartridges. Depending on the…
- Pobrania
- 69
- Polubienia
- 23
- Ocena
- 0
P
Printablestelemarklarry
Headphone monitor hook
I needed a hook for my wireless headphones to hang on the side of my monitor. The blacked out area is only 9mm wide and just hanging them on the side blocks the top of the screen. I printed this in PLA and this is modification number 4. I…
- Pobrania
- 61
- Polubienia
- 10
- Ocena
- 0
P
Printablesfoxylion
Organizer for Sandpaper (70x70x70mm)
A simple holder for sandpaper 70x70x70mm. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Notes: Print with a 0.4mm nozzle at 0.45mm line width.
- Pobrania
- 61
- Polubienia
- 10
- Ocena
- 0
P
PrintablesTalbot
Adapter for ear cushion from Marshall Monitor 2 to Major 3 headphone
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
- Pobrania
- 60
- Polubienia
- 12
- Ocena
- 0
P
PrintablesLukasZat
Honeycomb storage wall- Headphone holder
Headphone holder for your honeycomb storage wall. If you want to check the honeycomb storage wall then go to: https://www.printables.com/model/152592-honeycomb-storage-wall If you like my model, please be so kind as to upload your own and…
- Pobrania
- 60
- Polubienia
- 10
- Ocena
- 5
P
PrintablesCAD Undergrad
Wall Mounted Headphone Bracket
This is a customized wall-mounted headphone hanger designed to keep your headset safe, organized, and easily accessible. With a sleek and sturdy form, it fits most over-ear headphones and is perfect for use in gaming setups, home studios,…
- Pobrania
- 47
- Polubienia
- 9
- Ocena
- 0
P
PrintablesWolvie
Alpine F1 Headphones Stand
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTheCubingJar
3dPrintColorizer - uses sharpies to color prints (with some fixed parts)
Notice: Most of this is not my work please don't credit me for it, all I did was add a few better parts and organise them. The github has full instructions for how to install and set up. I recommend downloading the files to print from…
- Pobrania
- 45
- Polubienia
- 13
- Ocena
- 0
P
PrintablesIsaac
Headphones Wall Holder
Headphones Wall Holder This wall holder is designed to hold headphones comfortably and stably. Key Dimensions The holding area measures 44.00 mm which is the maximum width (i.e. the distance from back to front) of the top of the…
- Pobrania
- 44
- Polubienia
- 1
- Ocena
- 0
P
PrintablesWolvie
Williams F1 Headphones Stand
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
- Pobrania
- 42
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMarcinPaska
For My Beloved Grandpa
I wrote this poem after the death of my beloved Grandpa. A wonderful man who gave me everything, but most of all, he gave me love. In this poem, there is a constant, immense, deep longing for my Grandpa. I would like to know the answers…
- Pobrania
- 40
- Polubienia
- 33
- Ocena
- 0
P
PrintablesChris
Sandpaper Sheets Storage
Sandpaper sheets and sticks storage/organizer. 4.125"W x 9"D x 3.75"H with 5x 3/8" slots for sandpaper sheets. Included a sidecar with a 6"x1.25"x1.25" bin for sanding sticks and a 2"x1.25"x1.25" bin for whatever you can think of.
- Pobrania
- 39
- Polubienia
- 12
- Ocena
- 0
P
PrintablesWolvie
Haas F1 Headphones Stand
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
- Pobrania
- 39
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKerberos
HP DPS-1200FB 24V Power Supply Housing
A housing for two HP-DPS 1200FB power supply units. The enclosure was designed so that two voltmeters / ammeters have space and the whole thing can be mounted under a table, for example. In the top part there is also space for four 4mm…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
PrintablesObiWanKnewby
Arctis Nova Pro - Base Station Headphone Under Desk Mount
This is an under desk mount for the Steel Series Arctis Nova Pro Wireless base station with an integrated headphone hook. It includes two countersunk holes for screws to mount it to your desk. The design is optimized for printing, but I…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
Printableskweg
YALPS - Yet another lab power supply based on DPS3005 and ender 3 24V original power supply
So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…
- Pobrania
- 34
- Polubienia
- 6
- Ocena
- 0
P
PrintablesZbyněk Král
Headphone Hook
Print instructions: Material: PETG Layer: 0,2 mm Perimeters: 2 Infill: 15% Infill Pattern: Grid Supports: No, Brim: No This model does not require any special settings, more details in the attached 3MF file. Part list: Printed part Bolt…
- Pobrania
- 34
- Polubienia
- 9
- Ocena
- 0
P
PrintablesSkyhigh
Sandpaper Storage 5inch - Additional Files
Found ClubbedEwoks Sandpaper Storage 5inch French Cleat with dividers and ROS positioner - parametric and love how it turned out but my collection of sandpaper included more grits than was offered. So used my slicer to put new values in…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPaPaja
Headphone holder
Printed in two parts First attach main part to wall, then insert second part into holes ====================================================================== Hello, I have updated this model. Instead of two holes a third was added for…
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFlex1
TS-8 Rack-It - Woodpeckers
Rack-It bracket to safely secure your TS-8 Pocket T-Square.
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMarteinn - 3DP Iceland
Vase by Marteinn - 3DP Iceland
This simple vase was created in Fusion 360 print with vase mode for quick and easy print
- Pobrania
- 29
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAlexandre
Headphone holder or hook for MOSSLANDA Ikea
No need support with lateral position. 30cm in width and 30cm at the base of the hook. Accept several kilos with only 15% feeling. I haven't test the weight limit.
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJCote
Cartoni Spreader Claw (Endpiece) Replacement
Replacement part (P50 SPREADER CLAW (P750)) for a Cartoni Smart Lock mid-level tripod spreader (S731/SL). Intended for when one of the “claw” bits on the original breaks, and you only need the main part replaced. ADDITIONAL PARTS NEEDED :…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHollaDaywalker
Sandpiper
Can be scaled to fit your decor. I have a Small (70%), Regular (100%), and Large (110%) print files ready to go.
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKamil
Childproof Drawer Safety Lock - Hook and Latch (Shortened Height and Extended Latch)
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGreymanx
VELKASE Velka 3 HDPlex400 Cover
The HDPLEX SFX bracket has been out of stock for months after building a SFF PC in the VELKASE Velka 3. I opted to go with the Screw-Lock 7.4*5.0mm Female DC Jack option for use with a DELL laptop power supply. Covers the case's power…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesVetti
Headphone Stand with weight pockets
This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTrajan
Armattan Tadpole Insta360 Mount Base-Plate
I wanted a solid mount for my Insta360 Go 2. The base screws into the existing front cage mounting bolts and takes a small zip tie in the front to fully secure it down. The bolt hole is for a standard m2 screw and the nut should recess in…
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
Printablesnmumphrey
M12 Detail Sander Sandpaper Holder
After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…
- Pobrania
- 22
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMENDIss
Headphone and Cable Holder under Table
This model is designed to be mounted under table and hold headphones, as well as a cable. Depending on the model you choose, it may hold a smaller sized cable, or a bigger sized cable. I mainly use the other side to hold cable from my VR…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0