5115 modeli
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
Wydruk około 6,75 €–8,25 € nettoWstępna wycena jednego wariantu
Combo headphone hook holder and a single SD card holder. I've originally made the hook for my Koss Porta Pros, which have a very narrow headband. Due to popular demand, I've also added a version for wider headbands. And there's also the…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 18,09 €–22,11 € nettoWstępna wycena jednego wariantu
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Once upon a time, I printed this: Cat Ears for Headphones by usernamexx - Thingiverse Today it broke :( So I designed my own to improve upon the design. What makes these better in my opinion is that it prints in a single part and is hence…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
A free-standing desktop headphone stand, similar concept as the famous MakerBot stand , however designed from the ground up with the idea of the back of the stand being flat. This allows the stand to be placed with it's back against a…
Wydruk około 12,19 €–14,90 € nettoWstępna wycena jednego wariantu
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Wydruk około 4,39 €–5,37 € nettoWstępna wycena jednego wariantu
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
Wydruk około 31,20 €–38,13 € nettoWstępna wycena jednego wariantu
Simple headphones wall mount with hidden screws. Print instructions I would recommend you to use some strong filament but even PLA is strong enough. Also to make holder more durable use 3D honeycomb infill on 30% or gyroid on 40%. The…
Wydruk około 3,08 €–3,76 € nettoWstępna wycena jednego wariantu
Headphone desk support, thought out as modular - I also want to print some other models to attach to the desk, things like a sorting tray for small parts or a soldering iron holder. While the support itself easily slides in, after you…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Headphone stand Print instructions: For the look i recommend to print both parts with 0,15 mm layer height Fasterners: 1x M8x16 screw DIN 912 1x M8 hex nut DIN 934
Wydruk około 8,43 €–10,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A headphone hook designed to be glued under a desk or under a shelf using double-sided tape. Print instructions The "shelf" part of the hook is ca. 50 mm deep, scale the model accordingly if your headphones have bigger bridge than that.…
Wydruk około 6,23 €–7,61 € nettoWstępna wycena jednego wariantu
Very simple headphones holder. Should work for many types of headphones. Basic parameters: Dimensions: 70x28,2x44mm Holes: 2xØ3,5 mm Supports: not required
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Modular headphones holder with clamp for your desk or shelf. It has a large (detachable) support to avoid dents. I couldn't find any other design with similar characteristics here on PrusaPrinters, but after quite a lot of digging on…
Wydruk około 5,42 €–6,62 € nettoWstępna wycena jednego wariantu
Apple Airpods Max Headphone Hangar Printed in Prusament Recycled PETG .2mm layers 20% gyroid infill Printed flat on the closed back I carefully measured and modeled a hangar for Apple Airpods Max noise-cancelling headphones. When in…
Wydruk około 3,71 €–4,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment. Choose from a smooth mounting bracket (I use this, attached by a 3M Command strip trimmed to fit) or a bracket with a single screw hole for a more…
Wydruk około 3,10 €–3,78 € nettoWstępna wycena jednego wariantu
Headphones holder : You can print the holder with an infill of 20% but you have to setup an infill of approx. 50% for the edge next to the screw pitch (see GCODE file if it's not clear) to increase the strength of the print. Thereby you…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a two-part hook for hanging your headphones under the table. Hook part need to be printed on it's side, brace part with the cutout facing up. The screw holes are designed for 3.5 mm flat-head wood screws.
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
Wydruk około 4,47 €–5,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
FR: Il peux porter des tailles de anse jusqu'à 45mm EN: It can carry bight sizes up to 45mm
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
Hang something off a table. Designed for YETI Rambler or similar water bottle lid, but it'll work for anything that size – headphones, purse strap, etc. My first version uploaded puts the screw on top of the table. A newer version puts…
Wydruk około 2,92 €–3,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A headphone stand for desks etc optimized for 3D printing. Inspired by SaSSY Design's “Headphone stand and holder - simple modern design” but redesigned from the ground up to increase print speed, remove bulk, and reduce tipping over from…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena jednego wariantu
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
Wydruk około 16,56 €–20,24 € nettoWstępna wycena jednego wariantu
I was looking for a new headphones wall hanger and found twothingies design , this had almost everything I wanted apart from its dimensions. Changes Increased the width to be bigger, so the curve would be smaller and the headphones sit…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Stable Sony WH-1000XM5 headphone stand with charging cable box. The upper part is designed exactly for the Sony WH-1000XM5, but it will certainly fit on other headphones. The upper part is printed separately due to the height of the…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
Use double sided tape to hold it in place.
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It s a clamp for a desktop that hold a soda can and headphones
Wydruk około 6,63 €–8,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This headphones holder can be screwed (with two 40mm screws) to the wall or furniture.
Wydruk około 2,64 €–3,22 € nettoWstępna wycena jednego wariantu
A Print-In-Place folding case for KZ EDX PRO headphones. The headphones are safely and securely protected inside the case and wrapping the cord around the outside keeps everything closed. No supports or post-print processing needed!
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Hi everyone! I was very underwhelmed from the default Quest 3 Audio. Firstly I went with the DAS Mod, but found the strap to be uncomfortable, especially with glasses. I decided to modify my KOSS Porta Pro headphones and make them fit to…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Found this on Thingiverse, Perfect design to attach to the side of my computer.
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
This model can be printed in any material, but i recommend PETG. The model should be printed strong, so i recommend 4 perimeters and 25% infill. Happy Printing!!
Wydruk około 8,61 €–10,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
headphone holder mounting on laminate library shelves (18mm)
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Design is fully done in fusion 360, done during a live twitch as an example Simply print both components, and easy assemble by screwing it in place. I used 4 perimeters to ensure sturdiness, printed out of lime green PLA prusament. EDIT -…
Wydruk około 6,32 €–7,72 € nettoWstępna wycena jednego wariantu
Turn the screw to tighten Great for thicker desks
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
A simple and stable desk stand for headphones. If you like the model, please give it a like. ❤ Jednoduchý a stabilní stolní stojánek na sluchátka. Pokud se vám model líbí, dejte mu prosím lajk. ❤
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
Story behind model For years, the KOSS PORTA PRO headphones have been my enduring musical companion. Their timeless design continues to deliver an exceptional audio experience that never fades. Recently, upon repurchasing this immortal…
Wydruk około 4,48 €–5,48 € nettoWstępna wycena jednego wariantu
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
Wydruk około 2,45 €–3,00 € nettoWstępna wycena jednego wariantu
This is my take on the NZXT "Puck" style cable organizer. This is designed to coil a headphone cable or VR headset tether inside the channel and hang the headset or headphones over the outside of the cube. Print instructions This print…
Wydruk około 5,38 €–6,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is one of those things that if you need them, you'll know. Otherwise you probably won't give them a second thought. If you need them, you've either had one break or you learned that if you want to customize your headphones, you're…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to take small in-ear headphones including the cable and keep them safe
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
If you have a Flexispot standing desk and headphones, give this hook a try! It mounts using the existing bolts in the top of the desk leg (fits both left & right sides). The original model wasn't wide enough for the strap of my…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
Wydruk około 18,80 €–22,98 € nettoWstępna wycena jednego wariantu
used photo of original hook as canvas, look to RMTB for original files, i will remade thread too, probably, as original snaps when overtighten edit: just uploaded remake of thread insert, rotate hole toward hotplate in slicer, it was…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Repair kit for Philips SHP2500 headphones. To print all parts need to add in slicer mirrored part ( full kit in g-code file) Material: PET-G -recomended Layer high: 0,2 or lower Supports needed under the cylidrical parts ( support added…
Wydruk około 3,77 €–4,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After using this for sometime, I have added a hole to the side and screwed it place with a wood screw . Updated Increase the walls of the shaft to increase strength. Redone the tapering to print better Settings Supports under the crossed…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
Pouzdro na sluchátka JBL. Jde o pouzdro na sluchátka JBL LIVE 670NC. Pouzdro je udělané tak, aby byl maximálně využit prostor. Uprostřed je přihrádka na kabely. Jedná se o dvoudílný model. Víko drži na krabičce pomocí magnetů. Používám…
Wydruk około 5,69 €–6,95 € nettoWstępna wycena jednego wariantu
Hello, I designed simple heaphones holder. There are 2 versions. First (screw version) is for every desk and you can screw it with simple screw. Second version (Ikea Bekant version) is for Ikea Bekant desk,…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
A simple, easy-to-print desk-mounted snap hook. The original design is built for a 3cm desk, but you can change this directly in the slicer. The simple design snaps right onto the desk and has an option for padding if you are worried…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
CZ/SK Vhodný pro nenáročné uživatele, pro milovníky McLarenu a F1. k připevnění jsou zapotřebí 2x M2,5x20mm šrouby. Děkuji za stažení a užívejte si model EN Suitable for undemanding users, McLaren fans and F1 lovers. 2x M2.5x20mm screws…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This is a simple pressure that requires supports (optimally with organic supports). In addition to the STL, I also include the 3MF and gcode files that I used to print the files shown in the images on my Prusa MK3s+. The table top may be…
Wydruk około 16,67 €–20,38 € nettoWstępna wycena jednego wariantu
For Headphones with max width of 3,5 cm Max Clamping distance 3 cm
Wydruk około 3,60 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3 versions du support : Simple Avec attaches câble et encoches format USB type C Avec attaches câble et encoches format USB type C bicolor 2 coussins différents. Le coussin est à imprimer en FLEX/TPU/TPE de préférence Le mors de la vis de…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Easy to print stand for headphones and mobile phone. Two parts fits together nicely and holds firmly. Gluing parts together is not needed and stand can be disassembled and assembled again and again. The height between the base and the pad…
Wydruk około 3,08 €–3,76 € nettoWstępna wycena jednego wariantu
Print-in-place headphone holder for installing under table with 4mm screws.
Wydruk około 8,81 €–10,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a hook for my wireless headphones to hang on the side of my monitor. The blacked out area is only 9mm wide and just hanging them on the side blocks the top of the screen. I printed this in PLA and this is modification number 4. I…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
I got tired of my headset hanging off the side of my computer monitor when I wasn't using it. It would also block a portion of the screen. There isn't another good place to hang the headset so I made this model as a way to hang the…
Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Headphone holder for your honeycomb storage wall. If you want to check the honeycomb storage wall then go to: https://www.printables.com/model/152592-honeycomb-storage-wall If you like my model, please be so kind as to upload your own and…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Dust cover for the Drop Sennheiser HD58x Jubilee and Drop Sennheider HD6xx. If you have slightly smaller or larger pads/cushions but with the same shape, you can simply adjust the size in you slicer. The cover was measured with new and…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple accessory for hanging headphones and alike under any surface. Recommended to print in PETG on 0.6mm nozzle with no top and bottom layers, 2 perimeters, 15-20% infill and 0.3mm layer height. Install using 3x ¾" screws and don't over…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a magnetic version of my headphone holder for a magnetic wall or like me the metallic table legs of my desk. Simple design with a small logo. Perfect for headphones of any kind. Happy Printing and feel free to leave a comment or…
Wydruk około 2,91 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really liked the original cat ears, however the hooks were a bit too large for my headphones, so I've modified them a bit to fit better. I took the original .STL, remove the hook and let a STL fix-up tool fill the hole. Then I've added…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
On the high-end Kennerton Magister HI FI headphones, I recreated the Left and Right elements that connect the headband to the two cups.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Headphone stand for yamaha p125 piano. Uses the existing screw on the piano keyboard
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Simple headphone hanger for Ikea desktops without screw or glue. The cable management fits for 4mm diameter or less. Print instructions Use supports on the cable management, print in 0.2
Wydruk około 3,30 €–4,04 € nettoWstępna wycena jednego wariantu
Headphone stand that attaches to a shelf
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Remix of Chris's twin track bracket with a headphone hook so now it's just a “one trick pony.” Printed upside down with supports on the hook, keeps the twin track hooks clean.
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Print instructions: Material: PETG Layer: 0,2 mm Perimeters: 2 Infill: 15% Infill Pattern: Grid Supports: No, Brim: No This model does not require any special settings, more details in the attached 3MF file. Part list: Printed part Bolt…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Muffler holder for siegen weapon cabinet
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
With this print, you are able to hang your headphones from the side of your desk. Your desk has to have a thickness of 22mm. For me, this was more of a test-project trying to understand topology optimization. The structure you can see…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in two parts First attach main part to wall, then insert second part into holes ====================================================================== Hello, I have updated this model. Instead of two holes a third was added for…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Universal Headphone Holder for IKEA Kallax This universal headphone holder is designed for easy mounting on an IKEA Kallax shelf—no screws or tools required! All parts are 3D printed and can be assembled using just a 2 Euro coin. The…
Wydruk około 3,75 €–4,59 € nettoWstępna wycena jednego wariantu
Simple holder for headphones & mic mountable on metal PC cases and other surfaces. Originally designed for Logitech G PRO X 2 Lightspeed and Sharkoon PureSteel case The microphone slots into a small groove on the front. My print…
Wydruk około 3,29 €–4,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a simple headphone hanger to attach to my Yamaha digital piano. The width of the hanger is 0.750 inches. The opening for the headphone part is 2.00 x 1.00 inches. I designed the model walls to be 2 mm (0.078 inches) wide so I…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…
Wydruk około 10,21 €–12,48 € nettoWstępna wycena jednego wariantu
This Headphoneholder mounts easily to your perforated wall using a dovetail System. The holes in my perforated wall have a diameter of 5 mm, so I used an M6 tap to fix the headphone holder. If it should have another perforated plate, I…
Wydruk około 2,95 €–3,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Z cívky uřízneme jednu čtrtinu vytiskneme si zržák nasuneme ho na cívku a pověsíme na poličku.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Benchtop Powersupply case for the DPH32ß5 buck-boost converter. Has mounts for an ATX power supply.
Wydruk około 5,41 €–6,62 € nettoWstępna wycena jednego wariantu
A headphone holder that goes on the side of the desk. Fits desks that are 1 inch thick only. The middle slot for wires. can be printed with no support if you print on its side.
Wydruk około 5,05 €–6,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the excellent cable hanger wall hook https://www.printables.com/model/384695-cable-hanger-wall-hook by @sternli27 . I printed at 0.25mm layer thickness and painted “snug” supports in the interior cave that provides for…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
At my office, we use acrylic shields to divide our cubicles. The shields are held in place with laser-cut adapters. The top of the adapters (12mm x 12mm) sticks up, creating a perfect mount point. Features include “Headphones” label,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
This nut is an addition to the previous model, and is compatible with previous designs. Features: Increases clamping area Allows for compatibility with thinner wall Retains the threaded screw Recommended print settings: Layer Height: 0.2…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
A simple, easy to print, reliable spacer bracket for Ikea Alex Desks. I needed to add a headphone hanger to the leg of the Ikea Alex desk, but the thin legs proved to be too narrow for the hanger brackets. As such, I designed this model…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pegboard mount for Heavys headphones. This is my first model in FreeCAD and almost the first print. So if you have recommendations or ideas, I'll appreciate if you share them with me. The way I placed hooks and mount is not accidental, I…
Wydruk około 4,30 €–5,25 € nettoWstępna wycena jednego wariantu
With this piece you can use any headset with a button and use it as a photo trigger for timelapse. Adapted for Ender3 V2
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
-This Is usefull and quick to print headphones holder. -Printed In PLA -I have used 2 14x5 neodym magnets and It holds up without a problem. If you want you can use slightly smaller magnets and glue them in so they would not move or…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
