1990 modeli
I had a vision of a pop-art, digital, illustrative style drippy paint bucket and had to make it come to life! I designed this entirely in Fusion360 and printed on Prusa MK3S and MK3S+. All parts print and fit together well in PLA at .3mm…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
Two versions of the Drippy Display Shelfs. The pattern fits together so that they can be hung next to each other to make a longer shelf. Or be mixed up as I have done. Before hanging, I highly recommend printing this model so that the…
Wydruk około 7,25 €–8,86 € nettoWstępna wycena jednego wariantu
Source .blend file is included, if you want to make some modifications😉 The edge isn't raised around the hole because of all the different grips people use. Classic painting palette with slightly raised edge to stop paint from dripping…
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed. Print-in-place.
Wydruk około 5,33 €–6,51 € nettoWstępna wycena jednego wariantu
Good for vase mode and scaling too! Uses Fibonacci sequence to create the pattern. Enjoy!
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
Gardena Micro-Drip Sprinkler heads This is a sprinkler head for garden irrigation system based on the Gardena Micro-Drip hose. Models There are 3 models, for 3 diffferent angles: Angle File 160° Gardena Micro-Drip Sprinkler 3.stl 100°…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Ersatz Drip Tip für den SMOK TFV 16 & 18.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact build plate mount for your Saturn S to let excess resin drip off on an angle into your vat. Changed the original design to fit a Saturn S. Original design is too big and it doesnt fit onto the arm. Bracket now fits snuggly to the…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
Adapter for connecting the 4.6 mm tube of the Gardena Microdrip system with any G3/4 thread, for instance a magnetic valve or the water faucet. Additionally, you will need a G3/4 sealing to make the connection water-tight. Please note…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 13mm distributor with 4 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To hold your sprinkler in place and/or above the plants. Because of outdoor use I suggest PETG
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
il primo driptip per la sigaretta kiwi fatto dalla DYNAMICS
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The project was created as an educational aid for my students, so that they remember once and for all what colors are used for printing in offset printing.
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Wydruk około 0,80 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
drip tip di varie varie dimensioni, sia come foro interno, si come diametro esterno
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 13mm End Cap with 2 4.6 mm pipe connections One O-Rings (10.6mm x 2.7mm ) for the 13mm connection needed
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit diesen Klemmen können 2 oder 3 Gardena Micro-Drip Verteilerrohre 4,6 mm (3/16") gebündelt werden. Das System sieht dadurch etwas besser aus. Translation: DeepL These clamps can be used to bundle 2 or 3 Gardena Micro-Drip distributor…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NEW UPDATE - The assembly issue has now been resolved! You can now use the “Spill_Unbeveled_Fix” file to assemble the spill to the cone and scoop! If you prefer, you can also use the gcode file provided. Again, apologies for any…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
This modern planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the design…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Square ring designed for drip irrigation into a pot under a tube with a diameter of 4-6mm
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Connector for 15mm Gardena MDS Pipes. 2 O-Rings are needed. (9 mm x 1.7mm)
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gardena 13mm MDS to QuickConnect Adapter. useful as replacement for the pressure Limiter when used with low pressure water supply e.g. garden pump. 2 O rings are needed 9 mm x 1.7mm and 10.6mm x 2.7mm (As for MDS 13mm and QuickConnect)
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My chosen brand of mouthwash gets sticky and messy, leaking all over my bathroom cupboard. So I made this drip tray to keep things a bit more tidy. The design is supposed to follow the shape of the bottle itself, and the nubs inside are…
Wydruk około 3,99 €–4,87 € nettoWstępna wycena jednego wariantu
Print profile 0,20mm SPEED (Input Shaper) No glue needed, all snap connections, and I recommend printing in PLA for dimensional stability, however others have had success with PETG as well. As described by the original author
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
A 3D-printed alternative to the original metal part, which always scratches quickly and looks unsightly. It simply replaces the original part and doesn't require any adjustment. I've uploaded two possible file versions for the color…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zur Reinigung tausche ich ab und an die Tropfer des Gardena Micro-Drip-Systems aus. Dieses Werkzeug ist dabei sehr hilfreich. Die Schlüsselweite beträgt 8,2 mm. Translation: DeepL I occasionally replace the Gardena Micro-Drip system…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vor unseren Balkonkästen sind 6mm dicke wetterfeste Platten montiert. Diese Gardena micro drip Halterungen passen genau auf diese Platten , am Ende kann man den Schlauch klemmen. Die Tropfer können dadurch senkrecht nach unten tropfen.…
Wydruk około 6,67 €–8,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
This stacked donut planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
Update: v1.1 has better grip with my PLA filament For Gardena Micro-drip (like theese https://www.hornbach.at/p/gardena-micro-drip-system-regulierbarer-reihentropfer-0-15-l-h-10-stk/10602993/) my print parameter 4 perimeter 15% infill brim
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Listerine mouthwash always drips from the bottle and makes a mess on the shelf. You could be careful to wash the cap after use, OR print a work-around! This clamp-on device is designed to collect the drops that'd make a sticky mess on the…
Wydruk około 2,80 €–3,42 € nettoWstępna wycena jednego wariantu
No more wasted dish washing liquid! 👍💰 Print instructions: Material: PETG Layer: 0,15 mm Perimeters: 2 Infill: 25% Supports: No Brim: Optionally This model requires some special settings, more details in the attached 3MF file. Custom…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Halter für den größeren Gardena micro drip Schlauch am Balkongelaender. A Mount for the bigger gardena micro drip tube. I used ASA, because I use them on the balcony, UV! Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports:…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Simple drip tray for fermentation jars with 86 mm lid size (wide mouth). Made to catch brine or liquid that may escape during fermentation. The ribs inside the tray keep the jar slightly raised so liquid can collect underneath without the…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
(2.0) Update: New versions to counteract the “benchy hull line” If you're not sure what I mean by “benchy hull line”, read this article. I have rounded out the bottom interior of the planter to counteract the slight layer shift our…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
Simple bracket to hang the Elegoo Saturn 4 Ultra print plate to allow resin to drip off.
Update: I have uploaded a revised version of this model that decreases the angle on the curve on the bottom of the planter to improve print quality on the overhang. This revision also improves the tolerances on the tray so the planter…
This is a remix for ikea skadis. You can choose between the diffrent inlays to organice your pens or something else. I have an extensive skadis collection, you can find it here. All parts print and fit together well in PLA at 0.2 mm layer…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
Modern planter with drip tray which twist and locks into the bottom of the pot. The small pot has a 85mm opening and the large pot a 132mm opening . Support is needed in the locking channels on the bottom of the pot, the support is very…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
Aspire Planter: The Aspire Planter is the perfect size for small to medium sized houseplants, succulents, or cacti. The planter features built-in drainage holes and a drip tray that is perfectly contoured to the bottom of the planter,…
Due the new printing platform design for the Elegoo Mars 5 Series clean the resin could be more difficult. This drip bracket could help to recover a big part of the non-used resin and reduce the time to clean the platform. Print with…
This free planter is part of the Juno Planter Collection, you can see the whole Juno collection below. The complete set is available on my patreon shop, printables store and exclusive patreon or printables memberships:…
2 pieces simple hexa-comb drip tray. I used PLA for both parts, but you can use PETG or ABS for better durability. Dimensions: 150 x 230 mm Ideal for V60-02 dripper and 600ml kettle ;)
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
Update: v3 Release All three parts of the planter have been updated for this release. The main change is to the drainage pot. Now, the interior overhang is much less steep, enabling printing without supports ! The bottom interior surface…
Drip irrigation ring for containerized plants. Two sizes are provided - 100 mm and 120 mm. The Openscad file is also available for customization - you can vary the diameter of the ring, diameter of orifices, and the number of…
A simple 20×12 cm wall shelf with additional braces for improved rigidity. You will need 3 M3 screws and nuts for the assembly. A solid ("one piece") version is available as well. For the best possible finish print as shown on the…
This Elegoo Saturn 4 Ultra Drip Hanger allows for bed hanging at the steepest possible while also adding a 5degree cant to the rear. All that excess resin will run to the corner of the build plate. Utilizes the printers factory build…
Slim Drip Tray for Gaggia Classic that fits where the normal drip tray does. This adds enough room for a scale to fit underneath Also added a version with rounded edges for easier printing
This is an angled drip mount for Elegoo Mars 4 Ultra. It helps to reduce amount of resin on the build plate after printing and prevents of excess resin fall off both the platform and print itself. Could be printed on Mars 4 Ultra itself…
This adapter is designed to be installed on the build plate and left on. It won’t interfere with normal printing and is set up so it won’t dip into the resin. It can be printed on either a fdm printer (i used my K1) or on the mono m7 pro…
A simple and compact build plate mount for your Saturn 3 Ultra and Mars 4 Ultra to let excess resin drip off on an angle into your vat. If you have a heated chamber you should print it with a more heat resistant material. The recomended…
For easy branching and connecting of the 4.6 mm Supply Pipe or 4.6 mm Drip Irrigation Line. ------ I printed with these settings: Resolution: 0.15 Supports: Yes Infill: 20% Rafts: Skirt Filament: PolyMaker PolyLite PLA Pro Grey
UPDATED - The new version has a slot cut out to fit the updated 16K build plate (the one with the ears) and I am including a mirrored copy in case you want it to hang in the other direction. I built this remix up from scratch. I have…
This is a remix of Cryptothornton design. I've made a bunch of changes. I've tampered the hole that mount it to the unit so that it has a tighter fit on the arm and beefed it up to make it stronger. I also lengthened the arm so that it…
Fits into the bottom and top of the “wall-honeycomb-part.stl”. I have mine held together using the tri-hollow inserts where the borders connect, and then a dual-hollow insert on the ends. I may end up modifying the pieces into a left and…
I would recomend making the faunel from petg or abs to make it more water tight, also use at least 4 perimeters and 35% infil , and add brim while making the funnel, for better finish it may be nessesary to add suport to the holding arm.…
Here are my first 810 Drip Tip designs. The spiral one is designed to prevent spitting. The gun barrel one is just for refining the blank one. I included a step file of the blank Drip Tip so you can add further designs. Have fun :) If you…
Print without supports ideally for a smaller layer height (for example 0.15mm). You can use rubber bands from an old atomizer or another 510 drip tip.
Elegoo Saturn 4/Ultra/16K bed drip mount extended to suit buildplates with handles https://www.thingiverse.com/thing:6954020 Category: 3D Printer Accessories
Kitchen sink organiser with built-in drip tray/runoff, so water runs back into the sink so never needs to be emptied and brushes and clothes dry out. The base is universal and fits any of the tops, so you can mix and match colours or…
Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…
Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…
Note: I am moving to Maker World, I don't have to time to make new uploads here too. Check it out for new models! https://makerworld.com/en/@gustav.ferdman We've all seen the PET-bottle plantwaterer's. However, this one is adjustable for…
Keep your countertop clean, dry, and organized with this practical 3D printable glass drip tray. Designed for everyday use next to your coffee machine, sink, or kitchen counter. The removable perforated insert allows water to drain away…
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
The build plate drip attachment is compact and avoids touching the VAT below it, so there's no need to remove it.
Lots of different divider options to choose from. Pick the one that best fits your needs! __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about…
A decorative "dripping" (or "melting") brim attachable to the original honeycomb wall by RostaP . It's available as a single solid piece (16 hexagons, 333×77×8 mm) and split in 2 parts (8 hexagons, ~170×77×8 mm each) fitting a regular…
You can put this on your tv stand, bookshelf, coffee table ect. Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 20% Filament material: PLA+ Filament brand: esun Filament color: Red
printed in PLA 0.25mm 4 bottom and top layers
Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…
This model is intended for Dedica EC885 with naked portafilter. I added a central hole for coffee to drip and a smaller hole to purge a steam wand. The original model this remix is based on was for EC685, so it will work for both, but the…
Simple bracket for draining the excess resin for Anycubic Photon Mono 2.
While many of my Gaggia-related models are specifically designed for the Gaggiuino project, this one is not. People requested a standalone version of my low-profile scales drip tray from the Gaggia Classic | Pro Scales , so here it is!…
If you read this, please leave a ❤! While using my original design I noticed it was difficult to grab onto the build plate with one hand. The caddy was in the way! I've mirrored the design so it mounts on the back of the plate instead of…
This is a drip head for my garden irrigation system, based on the Gardena Micro-Drip hose. I use it to irrigate my tomatoes and chillies with the water from my rain barrel. I have put together a short video of my irrigation system:…
This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…
Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…
Inspired by the drippy bucket I wanted to challenge myself to designing a dripping ice cream cone. From this I wondered how it could be used practically and thus spawned the drippy shifter. This design is made up of multiple parts with…
Modular tray to let dish appliances and cutlery drip of. Designed to sit on the edge of the sink so the water can drip back into the sink. Currently the parts are designed that you need exactly one of each. Height of overhang: 4,6 mm…
Flow restrictor for drip watering plants. And mist sprayer.
This drip bracket could help to recover a big part of the non-used resin and reduce the time to clean the platform. Print with strong infill and at least 4 perimeters.
Drippy Tissue Box For tissue boxes with max. 230 x 115 x 65 mm 0.20mm Standard support only for main part PLA / PETG
Plant drip tray Tray to prevent water leakage over the floor Tray can be customized by downloading the link to OnShape. ( use the free account: https://www.onshape.com/en/products/free ) Just change the desired value and export stl file…
![[REMIX] Drippy Flip-Top Bin](https://media.printables.com/media/prints/609966/images/4848897_0fda6b34-abb8-4201-af3b-21725af2ffd1_398a9720-442d-4da9-bd5c-9711d1ce655e/img-0.jpg)
