484 modeli
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…
Shoutout to @CraftySven for the awesome little Korok figures that he created. After making them, I wanted to complete the set of different masks! I used u/_pe5e_ 's analysis of korok appearances as a reference for the masks. I've included…
Painted with acrylic paint Support under the chin and belly Made only with Prusa Slicer bottom from https://www.thingiverse.com/thing:3998602 top from https://www.thingiverse.com/thing:2477925 Print instructions Category: Toys & Games…
If you are in need of a hinge with holes of a diameter of 3 mm you are in luck! length: 41 mm, width: 2 x 13 mm, 3 holes: 3 mm One end is open which I have melted wider as soon as it is assembled with a soldering iron but you can use an…
I love Altoids but hate throwing away the tin. This print turns an Altoids tin into a 2 compartment storage. Great for dividing small screws, parts and such. If you make it please leave a review. Need a rack/storage for all those Altoids…
This container has 15 slots for storing 90mm wide seed packs. The packs are easy to remove and place. You can find the blend file in the files if you want to adjust the width. Printing Difficulty: I I : Novice printing knowledge Basic…
Screw Mounted Cable Zip Ties 3.6mm Width, M3, M4 & M5 Heavy Duty No problem…. Zip Ties set (150/300mm) x 3.6mm Width Screw Size: M3, M4 & M5 x (20/25/30/35/40/50mm) Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere…
This 3D-printable screen-printing squeegee is designed for makers and workshops looking for a versatile and easy-to-make solution. Available in multiple widths and two heights: S for small hands M for medium hands, ensuring a comfortable…
Traffic light for the model (road width should be 13cm) The signal has three lights (green, orange and red) and floats on the road. It is easy to install with 3 screws. In my mockup, it is controlled by arduino uno r3. dimensions: 9cm x…
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
3/9/26: Converted to 3 sections for smaller build plates Part List: 1, Front Section (With or without Plate) 1, Rear Section 2, Side Clips 1, Plate (If using Front with Plate) 2, M3x12 machine screws with square nuts
An OpenScad implementation of the “ crossed-lines method” for creating curves of constant width . I include some examples (with a constant width of 10cm and a thickness of 2cm) and the script used to generate them. The script is able to…
Cable Wire Zip ties 3.6mm Width Mount Hole Nail Screw Dimension 2mm, 2.5mm, 3,mm, 3.5mm, 4mm & 5mm Heavy Duty No problem…… Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere Thank you ;-)
Screw Mounted Cable Zip Ties 4.8mm Width, M3, M4 & M5 Heavy Duty No problem…. Zip Ties set (200/300mm) x 4.8mm Width Screw Size: M3, M4 & M5 x (20/25/30/35/40/50mm) Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere…
Zip Tie 3.6mm Width Tie Mount Screw M3, M4 & M5 Filament PLA or PETG or ASA and ABS Recommender ASA Support: Everywhere Thank You ;-)
This is a thunnel I made for an acquaintance. It went through several iterations.
I made this remix for usb plug hole in the mini enclosure to use it with the usb mount by https://www.printables.com/model/1003952-external-usb-socket-for-mini-enclosure. Printed in Prusament PETG ultramarine blue.
Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…
Feedthrough connector for WAGO 221-411 connectors. Perfect for going entering enclosures or going through walls with cord with up to 3 wires. There are three options of entering the connector from the “outter side” Corrugated tube…
Holder can mount with screews, glue or cable ties. 2025: I add a OpenSCAD file. Now you can easily design your holder for your special need. Hint: create a 2 hole holder with a “base_length = 8;”
Used this as a learning tool for Fusion 360. Intended use was just for the filament samples sent with the printer. Now I am using them once a spool starts to run low, saving space within the filament box for more to arrive. Print…
UPDATES: 20250123 - Added RPi3B Variant but I don't own an rpi3B so check before printing! 20250123 - Added Headrail files since I didn't include them originally Everyone be sure to check out Jeff Geerling's Github and website for more…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
Salut, Voici un système de boîte de rangement à assembler et à largeur variable. Pour créer la boîte : Imprimer les 2 cotés grâce aux fichiers “coteD” et “coteG” Imprimer la traverse à l'aide du fichier “traverse” → Pour régler la…
Actually, I don't think it's necessary to publish another variation of a filament roll holder here, especially as they are very similar. There are so many that work well. It's really hard to decide for one. I decided for TUSH++ a long…
This is a remix from Thingiverse Thing #4693620 by Ralph Hoerhager. Thanks Ralph for this great idea. Simple but very effective! Main differences and reason for my remix: This wedge fits 280mm Sandpaper sheets (typical in Europe…
In Fusion360, specify your wished slot height (width of the tube + tolerance) in the “wished_slot_height” parameter and the model will adjust to your needs. The minimal height is 13mm and it is automatically enforced. This model…
Half-Width Gridfinity Divider Bins I use these to organize my small electronic components. Included Divider Bins: 3x.5 1U Divider Bin 3x.5 .5U Divider Bin 2x.5 1U Divider Bin 2x.5 .5U Divider Bin STEP files are also included if you would…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Are your parts not fitting…
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
Here you can get bookholder for your Skadis pegboard with 20-80mm width. You need to print at least 2 holder for one book, as seen in the picture. The back part of the hook has to be flexed to securely fit on the pegboard. I used PETG…
For my filament box I wanted to have a spool roller with following features: Shall save space in the filament box. Enable easy replacement of filament spool. Shall work for 1kg spools with ⌀200mm. Shall be robust and avoid jumping out of…
Print the parts. The handle horizontally on the print bed. Apply soft tape to the spot where the sandpaper or emery cloth will be applied (white in the picture). Cut sandpaper or linen 10 mm wide. Assemble the whole thing with M4 tread…
Cable grommet which screws into each other from two sides. Two models; one for ~4-6mm thick wood, one for ~10-14mm thick Used this on my camper. Might need to scale inside/outside part by 1% bigger/ smaller in X,Y to create extra…
Remixed version of Chris' ThinkCentre Tiny shelf to accommodate the larger dimensions of the Mac Mini Print with support enforcers over the front panel cutout, no supports otherwise. Split version should fit most standard printbeds in two…
The idea is based on https://www.thingiverse.com/thing:4138933 You need for V1 sensor: 2pcs small 623ZZ bearings (OD:10mm, ID: 3mm, W:4mm) 2pcs small M3 washers (washer goes under bearing) 6pcs M3x8 screws spring from an automatic pen…
a few modifications from Cat litter shovel by andrey_mikhaylov, mainly to fill holes an make it to print without supports and to make width 150mm Print Settings Supports: No Infill: 25 Notes: 0.2 layer height 0.5 layer width /set your…
Each part is easy to replace and relatively fast to print. The entire thing only uses ~60g of filament. A bunch of other cheap jigs are plastic but you can't replace parts that wear out from touching the drill bit. The center gear as well…
Remix of https://www.printables.com/model/243424-multi-use-case-with-inserts to hold 12 AA batteries (or any 2 inserts)
Maturity: Very good. 10 prototypes. In use since 2024/06. A spoolwinder easy an fast to mount on a drill. There is no screw. It fits an 6mm hex bit. The spool winder is for any spool hub in the range 50-55mm. Choose the spoolwinder with…
Es gibt zwar schon den ein oder anderen Ständer aber ich wollte ihn etwas anders und grundsätzlich ohne viel chichi. Er ist so konstruiert, dass das Wandthermostat genau passen sollte und man ihn mit etwas Kraft auch einfach wieder…
With only 2 small screws, you can hang your guitar savely in your room with easy access, print it on the top surface and you will need no supportstructure.
A sturdy spacer to move your Fanatec ClubSport Handbrake V 1.5 farther out from your shifter or other mounting point. There is zero wobble due to the large contact surface. Change Z height to the dimensions you want. By default, the part…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 2 Infill: 5% Material: Brand: GraKit Material: PLA Color: Tri-Color Black/Gold/Red printed on Creality Ender 7
I wanted to add case lighting to my Voron 2.4 3D printer, but I was not too fond of the options available. (mainly the version where you print individual little brackets which you shove onto the led strip, and the version from Kapman's)…
When I published the 1st version of the Wood chisel sharpening guide I was already thinking about a way to adjust the guide to chisel width without 3D printing and replacing the removable spacers (in orange in the picture below) Design So…
Initially I designed this lamp post for a friend of mine, then decided to scale it down to fit my own N-scale model railroad as well. The height for the N-scale model lamp post is 75mm and it is designed both for single material and two…
There are many radiator boosters. This one is for radiators with 140 mm inner width and 120 mm fans. You can use up to 4 radiators. The booster consists of two components: controller holder (need 1 print) fan holder (need 1 to 4 prints)…
🌟 RECOMMENDED 3D PRINTING SETTINGS 🌟 To ensure the best results for your 3D printing experience, we recommend the following settings: 📏 Layer Height: 0.2mm 🚀 Print Speed: 40 - 50 mm/s Please note that the specific settings may vary…
Remix of existing model by SpamBouncer modified to fit my Calipers. Channel for the Caliper Main Scale has been increased to support 16mm width. There are 2 versions both support Caliper models with Main Scales that are 16mm wide. I…
Filament spool holder with adjustable width 45-75mm. Layer height: 0.2 mm Walls: 3 perimeters Top and bottom layers: 4 each Infill: 25% I recommend performing a plastic shrinkage test and applying corrections in the slicer to ensure…
Different width Sram Level TLM/Ultimate bleed blocks (part.no. 11.5015.014.090). The bleed block comes with multiple sizes: * 12mm (default) - Use when bleeding brakes which afterwards will use new pads * 11mm - Use when bleeding brakes…
This is a simple filament feed-through for the Snapmaker J1, if you want to put the spools inside the printer. There are version which go straigt up and versions that are tilted 20 degree to the left and right. You don't need any tools or…
https://paypal.me/radicalreel Added wall storage jigs --------------------------------------- This is a remix of my ratchet strap reel which lets you take of the crank. If you print more of these it can be usefull. Some users requested it…
This is a spool holder designed to reuse the pom wheels from a stock ender 3, because more parts reused = more better. @MaxS on discord has fixed some of the problems it had, and improved the design (it now uses m5 screws as a shaft and…
Gloomhaven is awesome, but...let's replace the cardboard chits with something more interesting, right? I found a lovely rat from dutchmogul under the Share Alike-Creative Commons-Non Commercial license, and repurposed it. I chopped off…
A stable cable rack with Slot with from 4 to 8mm Print instructions Place the slanted bottom surface on the bed. 10% infill should be enough. Approx. 3hrs Print time in Draft Mode
It was printed with TPU 80A Print Settings: Perimeters: 2 Infill: 0% Fill Pattern: Concentric Solid layers Top: 2 Solid layers Bottom: 2
50T GT2 Pulley, 6mm belt width, 5mm bore. Includes slot for m3 bolt and M3 screw for shaft tightening. Print on flat side, with bore perpendicular to the print bed.
Резак для бутылок с переменным углом резания 8 мм.
What is it? Sanding block with a 115 mm width to match common sand paper roll sizes. It has two knobs to easily release a sand paper for quick replacement. Holding a large block on it's own might not be as comfortable so it has a handle…
[CZ] Držáček na malou baterii 12V pro akumulátorové nářadí Makita, se zámkem proti vypadnutí. [ENG] Small battery holder 12V for Makita cordless tools, with lock against falling out. Category: Tool Holders & Boxes
Reduced the width and added a lip so there isnt a gap between the window and block Category: Household
I needed nuts for a pipe fitting, so I created them in Fusion 360. The thread is a british standart pipe thread (BSP) in 1 ¼" and for the outer keywidth I've chosen 50mm. The nuts works perfectly printed in PETG with 40% Gyroid infill.…
Let there be light! Simple led mount for Qidi Q2, angled at 45 degrees for optimal exposure. As you can see in attached pics there is waaay more light in the chamber now. Installation is super easy, just unbolt three screws in the front…
Just remixed cover to uncover the LED light. Used camera: https://s.click.aliexpress.com/e/_DF4iHKl
Available for purchase on my store for folks without access to a printer. If you race in UCI sanctioned cyclocross events, then you're likely aware of the 33mm tire width limit. This is a tool to quickly check that tires do not exceed…
Expanded to full width
Simple model to mount a 10mm wide LED light strip to 2020 t-slot extrusion at a 30 degree angle. Mounted using (2) M3x6 button head bolts and (2) M3 t-nuts. The strip should slide through the channel, which keeps it in place without the…
Back in 2018 this was my very first design online. It's the first someone else downloaded, printed and posted a make of. It really felt good and it still does :) https://www.thingiverse.com/thing:3055819 BOM to print: 1x…
Shovel prints without supports ,adjust line width to print sides solid ! Photo is from 150mm version
Print in PLA works, but I like to print this holder in PETG to give it a little more flexibility. Use for watch, smartwatch (e.g. Open Smartwatch) Update: 13th January 2023 As mentioned in the comments, I've added some more versions to…
I made a new rig because the other ones were too wide and would risk damaging the wood when polishing with a rotary tool or steel wool. Modelled after a fender strat, fender tele and a squier strat. I suggest printing these in PETG for…
cutted both sides and put them together again to fit a width of 160mm
These are moving templates and weapon templates for the game Gaslands that have been modified from the original Templates (see picture) in such a way, that they are all 32mm of width at the start/ending of the template. I intentionally…
A newer, improved version of the adjustable width trash bag slider. Now the rail sliders are already attached to the holder pieces, and there is a little nook at the lower side of them to avoid collisions when multiple such holders are…
A zip tie cable clip for insertion into 2020 aluminium extrusion with 5mm nut width.
Thanks to Just Joshi for this original part. The Shelf has a depth of 18cm. There are 2 variants in the width, one with 18cm and one with 20cm. Therefore it fits on all 3 Skadis models. For the 76cm Skadis board you take 2x 18cm + 2x…
Dyna Dry Box / Filament Box 4L w. Sensor, Bearings max. Width because my spools has a rounded edge - doesnt fit.
I love Altoids but hate throwing away the tin. This print turns an Altoids tin into a 4 compartment storage. Great for dividing small screws, parts and such. Don't forget to post those makes! Need a rack/storage for all those Altoids…
After upgrading to the new Prusa enclosure I had an issue of trying to figure out the best way to load filament to the MMU2. In the end I decided on this design. I reworked the rear top plug at the back of the enclosure to have 5 holes,…
No shell cutting required, replaces the sliding doors at the bottom of the priming slide. Undo the four screws on the slide, pull out the doors, put in the T-pull, assemble again. Printing requires support for the tabs on the sides.
Solids of constant width maintain the same distance from top to bottom no matter the orientation. This allows them to roll smoothly like spheres. A few sample solids are provided. Additional shapes can be generated in the OpenSCAD file by…
This is a wider version of the "cut-out" remix of the "Spielkartenmischer / Card shuffler" to support wider cards such as standard width "Bicycle" branded playing cards. I've also included a slip-on ramp for each side table that…
This is a fully customizable version of my basic keychain holder here . Do you need a convenient way to carry around your essential items? Whether it’s medication, earplugs, or anything else, a custom Keychain Kapsule is the perfect…
Gridfinity shelves with width of 5, these won't match exactly the opengrid grid but I cannot print bigger than 5w and I need it for some bins I have. Also made some with shorter backs so they are faster to print and consume less filament,…
This is an accurate 3D model (exported as STEP) of a 1.5GT timing pulley with the following specifications: Pitch: 1.5 mm (GT1.5 / GT2-1.5 series) Number of teeth: 21 & 26 Belt width: 6 mm and 9mm Bore: 5 mm (with flat on shaft, exactly…
Update 17 Feb 2025: I have done a sturdier design V4 for a while now. Made the catch stronger (maybe too strong), added bridges at the 4 corners to reduce the square frame collapsing. Update 27 Apr 2023: Removed <Eibos Easdry Extender…
Lid Clip for HDX Totes, Extended Width 3mm
I needed corner holders to use a cardboard box as an airbrush station. 1" x 1" x 4" with a .1" gap. I added fuzzy skin in my splicer for my print.
Wouldn't want to face this guy.
Due to the required overhang it is recommended to use PLA or a fiber infused material you prefer. I have used Proto-pasta matte fiber and Kimya ABS Kevlar. I don recommend using carbon infused material due to the amount of touching of the…
GT2 60teeth bore 5mm, belt width 10mm timing belt pulley Use M3 screw and nut for fitting.
Many clips uses force to clamp down on the tarp, wich can damage the tarp. This clip relies more on friction than force, and works on most modern thin materials. It is a bit fiddly to attach, but when it is on it holds the tarp securely…
This label holder will fit Plain Bins of width “2 Units”
The pegs can be used to adapt the 40mm spacing to the 45mm of a Netgear GS105, or any other device with that pattern. In “reverse” order, the pegs can provide a 35mm width pattern. The holes are 3.5mm to be tapped M4 and the tolerances…
I remixed only the main body and the two tension parts. For screws, please go to the original desin. https://www.printables.com/model/498139-sanding-sticks-with-labels
An 8020 mount for a 120mm fan. Print instructions Category: Electronics Summary An 8020 mount for a 120mm fan. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.2 Infill: 25% Filament: Inland PLA Black Notes:…
Print Settings Rotate the model onto its side for layer strength. I used 15% triangular infill for my print, but if you need additional support increasing the infill should be fine. If all else fails, increase stand_thickness . Parameters…
![Tamiya TT01 wheel hexes [different widths]](https://media.printables.com/media/prints/425363/images/3518554_bf45835a-4fb6-46ab-9f83-35d3528e8070/20220117_114136.jpg)
![Universal watch stand - 18 versions [2 sizes, 3 widths, 3 patterns]](https://media.printables.com/media/prints/121120/images/3106328_e464a468-3267-4ec0-9121-f8312617e74b/watchstandcover.jpg)
