Liczymy pasujące modele…
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BMP280 / BME280 Sensor Case with strain relief for 2-8mm diameter Cables You need 2x M3x10 DIN912 Screws This is a composite Part, click on “Split to Parts” in PrusaSlicer and right click on the intended elements. Add the following Part…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small enclosure for a BME280 temperature and humidity sensor. Print instructions Printer: Prusa Mini Supports: not needed Layer height: 0.2 mm Infill: 15% Filament: Prusament Vanilla White
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Neues Gehäuse für einen Garagentoröffner von Hörmann HSE-868 Zur Montage benötigt Ihr noch zwei Schrauben M2x8mm mit Mutter und den Ring zur Befestigung
Wydruk około 0,99 €–1,22 € nettoWstępna wycena jednego wariantu
This is intended to prevent fingers from entering a bulb socket where you didn't put a light bulb. Easily screw in/out using a coin or a screwdriver. Why you don't just put a light bulb in there is up to you, but now you can put this…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just minor modifications and deepened blade slot like the latest prusa design.
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small case that snugly fits an AZ-Delivery ESP32 D1 Mini board. The lid is designed to mount an external BME280 or BMP280 sensor board, although this is optional. It has been designed and printed as part of this project:…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Created using Fusion 360
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Extension for rather small hooks in the trunk of Toyota Corolla TS XII (E210). - version 02 (better fit, more robust). Printing from PETG (or something more durable) recomended. Inspired by https://www.thingiverse.com/thing:5444285
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model just fits on a Prusa MINI+. I used a 0.6 mm nozzle, 0.3 mm layer height and 10% rectilinear infill. But 0.4 nozzle and different settings should work as well of course. It just takes longer ;)
Wydruk około 4,51 €–5,52 € nettoWstępna wycena jednego wariantu
The Chandelier is based on the socket Ikea HEMMA E27. Instructions: 1) Print the parts (8 pieces) from PETG, ABS 2) Glue parts together with all purpose adhesive or cyanoacrylate (see Image) 3) Install socket Ikea Hemma E27 4) Install the…
Wydruk około 4,68 €–5,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Iphone 7, 8, and SE2020 case that should be printed with solid materials like PETG or PLA . I recommend PETG as it provides just a bit of flex to the case which can help with getting it on and off. PLA will work just fine just be careful…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter plate that can be used with the E27 bulb socket holder from Clas Ohlson: https://www.clasohlson.com/no/Pæresokkel/p/32-3842 Dimensions of plate is approx 58 x 88 mm. Diameter 40 mm and screw holes 4 mm.
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Threaded Cable Grommet for the E27 fitting Appropriate for round or flat flexible cables, configured by default for European E27 fittings with a M10x1 thread. The default stl exports will fit a generic flat 2x0.75 mm2 cable. You can…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Il y a 2 fonds différents : un pour cable encastré un pour cable externe --------------------------------------------------------------- There are 2 different backgrounds: one for flush-mounted cable one for external cable
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Tištěno z PLA, výplň 10%, bez podpěr.
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
Tested with PLA, PETG, ASA. On photos Prusa Orange print is ASA, black is Prusament PETG. ASA prints look better in my opinion. To assembly you need: M3 nuts (4 pieces) M3 distance (20mm) (m-f) (4 pieces) M3 distance (12mm) (m-f) (4…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Work in Progress. . .
Wydruk około 6,60 €–8,06 € nettoWstępna wycena jednego wariantu
The standard test cube has only X, Y und Z on three of six sides. Whether X and Y is mirrored is not visible with this kind of cube. This cube shows axis alignment problems more obviously
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Mesh used is 0.2mm thick PET plastic mesh harvested from reusable Billa fruit bags. Flange for the fan is sort of delicate and supports can be hard to remove from there.
Wydruk około 1,58 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Raft, auf dem struckturiertem Federstahlblech geprägt, ist die ideale Oberfläche zum Benetzen mit Geschirrspülmittel, zusätzlichem Speisen einer lang-lebigen dickwandigen Seifenblase während des Blasvorganges und sanfter Entnabelung…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo liebe Community Hier findet Ihr meinen überarbeiteten Headsethalter für das Jabra Evolve2 65. Die Grunddatei stammt von https://www.thingiverse.com/thing:5395322/files . Folgende Änderungen wurden von mir vorgenommen: Kabelführung…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Human ACE2 for interaction with S proteinu SARS-CoV-2 in heterodimeric complex with BOAT1 transporter was taken from PDBID:6m17 https://www.rcsb.org/structure/6M17 visualized with https://molstar.org/ and sliced in PrusaSlicer for 3D…
Wydruk około 22,49 €–27,49 € nettoWstępna wycena jednego wariantu
BME280 Temperature/Humidity sensor mounts. The holes for attaching the sensor to the mount are intended to accept M3 heat set screw inserts. The holes for attaching the mount to something else or intended for M3 wood screws. There are…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I never know where to store my usb keys or my sd cards. So I modeled a small support that I insert into the foot of my HP screen! I added the Step / f3d files if you want to adapt this model to another location / screen. Print…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
This switch guard prevents a power switch from being accidentally pushed. We have this switch, that is placed closed to a cupboard, and whenever the kids put something on there, they accidentally press the switch and turn the outdoor…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This project is part of the Educational Innovation Project IE25.6106 at the Universidad Politécnica de Madrid. It involves the creation of a custom-designed key that was awarded as a prize in an educational escape-room activity. The key,…
Wydruk około 3,22 €–3,93 € nettoWstępna wycena jednego wariantu
This activity is part of the educational innovation project XXXXX, which aims to improve student attendance through the use of physical rewards distributed in the classroom when students complete certain activities. Critical courses or…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I modified OddlyCinematic's Nikon FE/FM/FE2/FM2 Grip with BumpMesh to add some texture to the grip section.
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
I have lost this part for my lamp so I made one. Inner thread diameter is 40mm. Tested in PETG.
simple, basic lid raiser for Creality K2 plus Raises the glass lid by 40mm so that the bowden tube no longer rubs against the glass. Adds the option of ventilation. The ventilation sliders are inserted into the front, back and side…
Needed a replacement nut for our lampshade, so I made one. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG Signal White
Model description The Embraer E195-E2 is a narrow-body medium-range twin-engine jet airliner, that can carry up to 146 passengers, manufactured by Brazilian aerospace manufacturer Embraer. It is fitted with two underwing-mounted Pratt &…
All my designs are free to download, but if you like my work please consider to buy me a coffee =) Ferguson TE20 - Fully printable kit - scale 1/18 EDIT: Since the Ferguson TE20 sometimes have the headlights mounted on the sides of the…
A functional lampshade with a voronoi like pattern for E27 lamp sockets that have outer threads (like the IKEA Hemma cord set). Video tutorial: https://www.youtube.com/watch?v=6cxxnytzxkY I have also included a model that can be used as a…
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
Douille complète en fichier STEP pour utiliser lors d'un design afin de calculer si les dimensions sont exactes et positionner son ampoule correctement. Je ne trouvais pas ce genre d'objet en step ou F3d donc je l'ai fait pour fabriquer…
E26/E27 bulb sockets cost $3 to buy, this costs 0.30 cents to print! That's 90% savings to help justify your 3D printer purchase. I found Salvatore's 3D model fit the threads of light bulbs very well, however I wanted a more traditional…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
E27 LED Lamp Kit A modular lamp designed around a cheap E27 renovation socket. This kit features a single base model paired with three interchangeable lampshade options. The shades in the photos are printed with Bambu PLA Basic Beige.…
It includes 2 versions; 25mm Base miniature, 100mm Base collectible
A parametric FreeCAD model is included.
This is a working wall lamp holder for E27 socket bulb. Do not use with a voltage higher than 24 volts. Print instructions No need support
The lamp shade is held in place merely by the bulb itself. It fits on E27 “retro” LED bulbs and cheap sockets from DIY stores. Only use LED bulbs, incandecense bulbs become too hot! Printed using Prusament Galaxy Black PLA on a Prusa…
Wall mount plug holder for TYP2 electric car plug. Clean design without visible screws. Plug is secured by a latch which can be released when taking. ---------------------------------------- Wandhalter für einen Typ 2 Ladestecker einer…
28mm GPS mount for the GEPRC Mark5 and Mark4 FPV drone frame. The VTX antenna mount is for TBS-style antennas, and the receiver antenna mount is for standard T-antennas. My reason for using a 28mm GPS instead of the usual 18–25mm one is…
Beautiful Lampshade for Ceiling Lamp Size 247mm x 172mm with E27 base. Optimized with E27 Base and stretched a little bit for best quality in vasemode. Print Suggestion: Vasemode with 0,2 layer height 6 bottom layers / 1,2 mm bottom…
Simple case for a Vision Master E290 that fits a 3000mAh and the new variation of the buttons which are now on the back, folding antenna that allows all possible positions. There's space to add a gps and buzzer but I'm still working on…
These models are remixed from Frank Dreschner's “Designer Lithophane Moon Lamp” [1], and raTmoles' lithophane solar system [2]. I extracted the bajonet adapter from Dreschner's original model and fitted it to the respective 3D model.…
small ring that fits perfect.
Version 5 Features: SNAP TOGETHER DESIGN MOVING SIDE-RODS ROTATING WHEELS MAGNETS FOR COUPLING TRUCKS (OPTIONAL) NO SUPPORTS FITS COMMON KIDS WOODEN TRACK (20mm between wheels) WORKS WITH THOMAS WOOD SERIES, TAKE ALONG, AND TAKE N PLAY…
A charging stand for the Jabra Evolve2 65 Headset Designed to hold the USB C cable that comes with the headset. No support material is necessary. Print in the upright orientation. This is a remix from @daRiddler Jabra Evolve2 65 Dock to…
I have several spare sockets, but unfortunately they are mostly without any rings that screw onto the socket. I have identified two types of threading that slightly differs. One has an outer diameter of 40.2 mm and a pitch of 2.4 mm. The…
Death Star lamp for E27 lamp socket. Both models need supports.
The Speedline wheel from the legendary Audi Sport quattro S1E2 Group B rally car, in 1/10 RC form. Designed to be paired with this: https://landlmodels.co.uk/collections/audi/products/quattro-s1?variant=29373806575677 This wheel has an…
This is very very tight, need to hammer in. And it have rib design to catch and stay in place with the OG top lid. Might need support for the one with hole. If need to print things like ABS, just masking tape around to tape over the…
I have remixed this beautiful lamp to have a larger hole (D=41mm) for standard E27 mounts and have also added 25mm to the height to allow space for even the largest E27 bulbs. The lithopane size needs to be adjusted to 115x90mm (height x…
Remix of ddanijell’s case for the Heltec Vision Master E213. The slim back cover fits a 2000mAh 103450 battery, and the thick one is for dual 18650s.
Check the profile to download the full set. Subscribe to not miss out the next one!
Hi It is my wheel to rc car. I was inspired by the Alpine BMW E21 wheels. offset 3mm widht 25mm diameter 52mm hex 12mm I recommend printing on the inside
Simple vertical wall mount holder for TP-link mesh Wifi type DECO BE25. Best to be printed from PETG layer 0.2mm. Enjoy!
this model is made to work the MKII but I have fitted it on a MKI model als well and the mount looks good on that one as well so you can use it for that as well. for FGC6 users this is model ready to use with out any risk. for FGC9 users…
My 3 year old and our dog knocked over his lamp and broke the E26 collar. Rather than ordering online I used it as an opportunity to use the power of community and 3D printing to find a model or find a model to re-purpose for my needs. I…
Uses m2.5 screw to secure the sensor in the housing…but its not needed, as the jumper wires hold rather snug. in the pictures, im not using a screw. made using freecad
Here in the Czech Republic, slightly different components are available than those used by the author of the original model. So I modified the original model a bit to finish this great lamp. 1x Emos power cord…
I could only find Chin Mounts online for the K3 SV, so I 3D scanned my helmet. Fit's well on my large and my girlfriends small helmet. The file is a bit lumpy as a result of using my phone to scan the helmet, could probably be smoothed…
Simple lamp shade for E27 bulb to use with Apia lamp holder from Leroy Merlin. Holder hole is 40mm. Print in vase mode (I used a 0.6mm nozzle) UPDATE: Better use “thin walls” in your slicer and should printer fine.
This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…
My garage door fob broke and couldn't feasibly be glued back together (again) so I made a 3D printed repair. 2024 edit: (Several people have asked me over the years if I also have the back part of case, or the switch. The answer is…
Description: Thrilled to introduce the OE2, a specially engineered adapter that allows you to effortlessly capture stunning images from your microscope or telescope using your smartphone. This adaptable device is compatible with eyepieces…
Modular Customizable Lamp for 1000 logos E27 (Batman, Star Wars and other stuff) A lamp in which you can change the logo, insert the company logo, your favorite superhero badge or any other graphics from the game. It is enough to add or…
Liked the original and modified it a little
I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 80 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…
This lamp shell is made for LED lamps like Philips Hue that typically works well with frosted glass lamps. It's a work in progress as I would like to make a more stable mount for the lamp socket but as a test it works well. The filament…
Deadt star lamp - full holder for e27 bulb
firts one i printed with 0.4 nozzle and spiral mode, but is was very fragile. second attempt 0.6 nozzle this one came out nicly for the hole in the base switch off the: remove al holes, in the menu mesh fixes (if you wan a vase, don't do…
N scale shell styled after Thomas in the RWS books post smashing into a station masters house. Fits Bachmann N scale Thomas chassis.
A ring for E27 bulbs. I could not find any appropriate one so I made it :) Work very well. Can be printed with PLA. I would recommend 0.15 or lower layer height, to make sure the thread will work.
A slip case for Heltec Visionmaster E290: Easy to print, comes with several variations: Slim and fat designs. The slim design has 6mm clearance between the top of the LoRa transceiver module and the case back The fat design has 23mm…
You can print this without using supports and using 20% fill. It provides the same stiffness as a purchased adaptor and should pop straight into the lamp shade once printed. Note : (nothing to do with the print). When fitting the light…
Originally published here: (WIP) OnePlus 10 Pro ne221 case by tato_713 - Thingiverse Thanks to Berk Turkay , and many others, who helped me testing this case. Some of the models are designed for rigid materials and others for flexible…
Got a new watch and needed a simply stand for it. Fits the charger (EP-OR825) snuggly. STEP file included. Print instructions Made for FDM/FFF printing, so doesn't need any supports. Print sideways and use 0.1 or 0.2 layer height.
Lamp base for Moon Lithophane. Link to moon Lithophane: https://www.printables.com/model/23859-designer-lithophane-moon-
This is my first attempt at making a poseable action figure starting from an xps file and ending up with a printable stl. I am a big fan of the Resident Evil series and I decided to make this just after Resident Evil 2 remake was…
Rafts: No Supports: Yes Infill: 20%
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
This is still a work in progress **If you have the buttons that look like this, this case will not work for you. Heltec changed the way the buttons work and this case is made for the old buttons on the side. ** Simple case for a Vision…
My design for the single carriage diesel motorwagon “DE1” in Gauge 1 (1:32) ( https://www.printables.com/model/600202-nederlandse-spoorwegen-blauwe-engel-de1-motorwagen ) could easily be modified into the dual carriage motorwagon “DE2”.…
Fits for Gira E2 series Print with supports, should also be possible to print upside down, but haven't tested that.
My first project after getting into Fusion 360. It's a wavy lamp with thick walls so the lamp itself is very sturdy. Hope you enjoy it! PS: Fuzzy Skin makes wonders on this one!
Lamp plugs for E14 and E27 sockets.
Bmw E30\E28\E21 - door lock knob. OEM: 51 21 1 852 140, 51 41 1 911 964 Almost same with original part, but looks better for me. Perfectly fits on original lock pin. Can be used with the original sleeve. But i recommend to use custom…
This is just a simple replacement nut for E27 lamp sockets. The lamp sockets are usually supplied with only one nut, although sometimes two are required for installation. With this file you can print another nut whenever you need it.…
Now take a look at that thing! Saw it, loved it. Evenso the Creator intended to CNC it out of wood, he offered his design as it should print just fine as well. You can check out his howto blog and also dont forget to leave him a like!…
Holder for sensor GY-BME280 3.3V (humidity, temperature, barometric pressure). BME280 Link to my models 0,15 mm layer. Sensor mounting: Allen screw M3x6 or 8 Fixing the top cover (but not needed, the cover holds on its own): Allen screw…
![Glue free Creality K1 Top Spacer / Raiser - Honeycomb vent [18June2023 Updated]](https://media.printables.com/media/prints/498294/images/4054428_6e5a5d2b-6758-4f12-a14f-88fcbd5b6b6b/pxl_20230604_135435086.jpg)
