Wyniki wyszukiwania: e34m1

Sortowanie

Liczymy pasujące modele…

P
Printablesjonspaceharper

E34M1 - EVA 3 for Mercury One.1

This is an overhaul and rework of EVA 3 to enable it to work on Mercury One.1 printers. E34M1 also comes with extensive documentation, including a guide to assembly. E34M1 Documentation Download your files through the documentation for…

Pobrania
792
Polubienia
169
Ocena
4,67
P
Printablessyph3rd

Zero G Mercury - E34M1 - Top MGN12H with Inbuilt Limit

I didn't want to buy limit switch PCBs, so I designed an upper mount with an inbuilt limit switch

Pobrania
349
Polubienia
30
Ocena
5
P
PrintablesJigawatt

E34M1 Universal Hotend Filament Cutter

The Blade should be cut to 32mm just get as close as you can while leaving the hole intact as shown in the picture https://www.amazon.com/TIHOOD-100PCS-Replacement-Hobby-Blades/dp/B07QP8L1QG Blade Holder: m3x3 Set Screw Blade Holder…

Pobrania
295
Polubienia
60
Ocena
5
P
PrintablesUltrazauberer

EVA 3.0 E34M1 V6 TZ2.0 Hotend Mount

It's a newly designed hotend mount for the EVA 3.0 / E34M1 system. The version available here on printables allows the airflow from the hotend fan going to the nozzle. That can cause fine hairs on prints (stringing). I want to block that…

Pobrania
208
Polubienia
25
Ocena
5
P
Printablescuiviemen

Beacon 3D mount solution for E34M1 - EVA 3 for Mercury One

Obsolete: I have made this as slim variant by introducing compromises (mainly soldered cable directly to PCB). Since then I have redesigned this to more modular solution and I strongly suggest to use variants here E34M1 . They do support…

Pobrania
196
Polubienia
31
Ocena
0
P
PrintablesCJHMDM

Zero G Mercury - E34M1 - Top MGN12H with Integrated Limit Switch (remix)

Remixed for my Ender 5S1 Mercury One.1 with a 235x235mm bed.

Pobrania
182
Polubienia
18
Ocena
0
P
Printablesjonspaceharper

E34M1/EVA 3 Lightweight Back Piece

This is a remix of Psych0h3ad's work to adapt stock EVA intakes for E34M1. I punched a bunch of holes for a faster, lighter print.

Pobrania
156
Polubienia
27
Ocena
0
P
Printablesjonspaceharper

E34M1/EVA 3 Dragon Hotend Mount

This is a remix to use M3x5x4 inserts. No other changes are made. BOM Part Qty Notes Screw, M3 x 8mm SHCS 4 For mounting the EVA 3/E34M1 front. Screw, M2.5 x 8mm SHCS 4 Usually comes with the hotend. Dragon BMO hotend (assembled) 1 Heat…

Pobrania
142
Polubienia
21
Ocena
0
P
PrintablesGryphus

Aliexpress REVO V6 Hotend Mount for Mercury One EVA3 (E34M1)

This hotend mount is designed for the aliexpress revo six does not use the standard voron spacing and has a 22m cylindrical cooler. Note that this is for the Eva 3 for mercury one where the nozzle distance is 68 mm from the top of the…

Pobrania
130
Polubienia
19
Ocena
4,5
P
PrintablesUltrazauberer

EVA 3.0 E34M1 ProtoXtruder 2.0 mount

Thanks to nhchiu and jonspaceharper for the extruder and toolhead step files and their work! I wanted to replace my Sherpa mini with the ProtoXtruder 2.0. The original drive mount for the Sherpa mini and the E34M1 didn't fit because the…

Pobrania
81
Polubienia
7
Ocena
0
P
PrintablesRaniel Endrino

E34M1 TZ2 Hotend Mount for ZeroG Mercury One.1

TZ2.0 hotend mount for E34M1 ZeroG Mercury One.1

Pobrania
77
Polubienia
12
Ocena
5
P
PrintablesNarbicus

E34M1 EVA 3 Toolhead for Ender 5 Pro & Plus - Stock Cartesian & Endorphin - MGN12H MGN9H, Single 6mm Belt , Front , Z Rod Drop Bracket

Work In Progress - Some parts not fully tested. Remixed parts to upgrade Ender 5 on a budget with the option of later upgrading to Mercury One.1 or Endorphin. EVA 3 is easily one of the best tool heads and the awesome E34M1 design…

Pobrania
69
Polubienia
19
Ocena
5
P
Printablesvrga_of_doom

BTT Eddy mount for E34M1 UHF hotends

added a bit of clearance for the bolts on the E34M1 hotend mount, as i had to break off a smidge on my print of the original added the slots for some vertical adjustment Print either as provided with supports, or with the toolhead-side…

Pobrania
64
Polubienia
11
Ocena
0
P
PrintablesLadPack91

E34M1 Top Right Integrated Limit Switch - Remixed and Fixed

Fixed the right side endstop model so that holes align properly. Takes m3 heat sets.

Pobrania
63
Polubienia
5
Ocena
0
P
PrintablesStudmuffin

E34M1 18mm Cpap Rear Inlet

Works for 17-20mm cpap tubing

Pobrania
63
Polubienia
7
Ocena
5
P
PrintablesJoshua Y

Eddy Coil EVA E34M1 Dragon UHF Mount

I ran into the problem that the ABL mount designed by Jonspaceharper works great for mounting the eddy coil with none UHF hotends. The distance from the bed was to large to be effective when running the Dragon UHF hotend. This was modeled…

Pobrania
62
Polubienia
10
Ocena
5
P
PrintablesElohel_models

E34m1 mercury one.1 BIQU microprobe mount

E34m1 mercury one.1 BIQU microprobe mount be carefull with the mounting screws its not the strongest mount due to the placement

Pobrania
58
Polubienia
11
Ocena
0
P
Printables53Aries

E34M1 Toolhead Filament Sensor

Filament sensor for E34M1 LGX Lite. Follow original model for instruction.

Pobrania
58
Polubienia
10
Ocena
0
P
Printables3D Experiments

18mm ABL probe mount for E34M1 tool head for ZeroG Mercury One.1

I followed the ZeroG Mercury One.1 part printing specs: http://docs.zerog.one/standard/print/settings The E34M1 tool head project can be found here: https://jon-harper.github.io/E34M1/

Pobrania
53
Polubienia
3
Ocena
0
P
Printablesjredmugen

E34M1 Adapter for Ender 3 V3 SE/KE Ceramic Hotend

This design adapts the Ender 3 V3 SE/KE ceramic hotend to the E34M1/Eva 3 design. This hotend is a relatively easy to find, cost effective way to get 300C and high-flow printing capabilities with an all metal hotend design and 60W ceramic…

Pobrania
39
Polubienia
8
Ocena
0
P
PrintablesSuperHKA

Dragon Ace Mount for E34M1

I modded the mount from the BMO hotend to fit the Dragon Ace hotend, hope you like it! THIS DOES NOT FIT WITH THE DRAGON ACE VOLCANO VERSION, NORMAL ONLY!! Normal ducts from E34M1 are used.…

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesSuroh

E34M1 Orbiter2.5 PCB Mount

I've noticed the pcb mount for the 36mm boards has been deprecated and the orbiter v2.5 I'm using has a weird angle, causing the cable anchor to be tilted slightly. I've added new holes to center the mount on the toolhead, straighten it…

Pobrania
37
Polubienia
3
Ocena
0
P
Printables7VNS

Depressor for E34M1

A remixed depressor for E34M1. Use a long screw (length depends on the distance you will need).

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesWnrsm

E34M1 BTT MicroProbe ABL Mount for Rapido HF and Rapido UHF

Requires two hot melt inserts. I placed the wiring on the outside so that it is easy to reach and has a smaller x-offset for the probe. I printed mine with ASA at 100% infill.

Pobrania
26
Polubienia
4
Ocena
0
P
Printables53Aries

E34M1 TriangleLabs TD6S hotend mount

M2.5 x 8 screws to mount

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesBryanA

e34M1 filament cutter holder for 26mm blade

Quick remix to accommodate the 26mm blades that came with my TradRack kit (pre-cut for Filametrix length). Blade is secured by a drop of superglue or epoxy added through the additional hole placed at the end point of where the knife blade…

Pobrania
23
Polubienia
3
Ocena
0
P
Printablesnoob_42

Eva 3 e34m1 edited for nuts vs inserts

Edit 4-11-24: Found that I didn't have the nut cutouts on the main body deep enough, resulting in it hitting the hotend insert when the belt clamps were screwed in place. Revised to make the holes deeper (so the nuts insert farther,…

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesRodrigo Santos

E34M1 LJ18 Probe Mount

If my model was usefull for you I would appreciate that you smash the like button and post your make, that would really help.

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesCharlotteBeLike

Apus2 for E34M1

Assembly drive and extruder first, then mount to front piece Extra BOM: 4x HSI 7x M3x6mm

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesLinus Betz

ADXL Mount for E34M1 Toolhead Filiment Cutter

E34M1 Toolhead Filiment Cutter ADXL Mount

Pobrania
21
Polubienia
4
Ocena
0
P
Printablesjrfhoutx

Biqu Microprobe Mount (E34M1)

I only found one mount for the Biqu Microprobe and E34M1 toolhead . But after installing it and calibrating, I found that it didn't quite have the mounting range I needed (since it was designed for a different toolhead I assume), and also…

Pobrania
20
Polubienia
3
Ocena
0
P
Printablesroyyyy

Mercury One.1 E34M1

I took the Original Highflow Front because of the Fan position. but it is meant for the normal Front so dont use the UHF Fan or Probe.

Pobrania
20
Polubienia
13
Ocena
0
P
PrintablesRobert Tomek

Amazon V6 Revo Hotend for EVA 3 and E34M1 toolhead

I bought a budget Revo V6 hotend from Amazon and it didn't fit in the normal Revo EVA3 hotend. Then I found the AliExpress version had an stl file, and it fit, however, the hotend was too low. This has two different modifications. The 3mm…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesMF-SHROOM

E34M1 Chonky EBB36 Mount

I was unsatisfied with the rigidity of the pre-existing options for toolboard mounts for the E34M1 toohead, especially when using a cable chain. So I made this mount MUCH chonkier in order to improve the accuracy of input shaper results.…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesGlitzville

E34M1 - Biqu Microprobe Mount (UHF)

Mounts a BIQU Microprobe to E34M1 using any UHF-length + single 5015 fan setup. There are a couple other options out there but I don't like the probe being right up in the front. If you're using a non-UHF setup then this will be too long.…

Pobrania
16
Polubienia
4
Ocena
0
P
Printablesjredmugen

CR Touch Mount for E34M1

Installation and use should be fairly straight-forward. This mounts to the E34M1 toolhead and is for use with the CR Touch ABL probe. My design basis was the Phaetus Rapido hotend (not UHF). The probe should sit ~3mm above the nozzle in…

Pobrania
14
Polubienia
4
Ocena
0
P
PrintablesDead Chicken

E34M1 cable anchor for HGX LITE Extruder

Its not really needed when using E34M1 top and cooling ducts, as the top offers a mount point for cable anchor. I'm using EVA3 top and bottom which is a bit narrower and EVA has a cable anchor in a different place, so I mixed up a few…

Pobrania
13
Polubienia
5
Ocena
0
P
PrintablesDavM

E34M1 for the Creality Sprite Extruder Toolhead

Released V0.2 - first released Released V0.3 - added belt grabber to front module WARNING! Do NOT use CF material to print the PCB spacer, as carbon fibre is conductive and will short the pin on the PCB, damaging the MCU board! IMPORTANT…

Pobrania
13
Polubienia
4
Ocena
0

E34M1(EVA 3)_Punisher_Shroud

I named my ZeroG rig punisher so I have a few mods and makes I am uploading

Pobrania
11
Polubienia
3
Ocena
0
P
PrintablesRobbie

E34M1 Orbitor PCB mount

Sheer laziness is the mother of invention And accidentally printing half of a project is the mother of remixes

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesLayerOne

E34M1 EBB42 PUG (Parametric Umbilical Gland)

I really like the E34M1 toolhead but there PCB toolhead mount does not fit the EBB42 gen2 so I made a few chnges by rasing the shroud mount up a bit then also added PUG connection for cable relief. PUG I used…

Pobrania
9
Polubienia
3
Ocena
5

ZeroG_E34M1_Volcano_Tri-horn_Insert

I printed in = ASA layer height = 0.2 first layer = 0.21 infill gyroid = 20% build plate wham bam PEX = 90c first layer 85c rest filament temps = 268c first 264c rest fan speed = 13% of total 255 NF Crazy Volcano (Mosquito Knock Off)

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesCaleb

E34M1 Modified Kraken Horns

Modified the E34M1 Kraken Horns to fit a standard Ender Hot End

Pobrania
7
Polubienia
1
Ocena
0
P
Printablesgkatsogr

Turbiter-SHT32 V3 back mount (E34M1 Toolhead)

Turbiter-SHT32 V3 back mount The idea is from Turbiter project. I wanted to print a Turbiter with an SHT36 v3 mounted on the back easily. So i designed it from scratch. You will need: 2x m3x16 hex screws 2x m3x22 hex screws 2x m2x4…

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesCaleb

E34M1 Diagonal Cable Anchor

A beefed up diagonal cable anchor for the E34M1 tool head platform.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesCCW-Trucker

E34M1 Cooling Ducts For UHF Hotend With 8mm Probe Mount

A while back, I converted my Creality Ender 5S1 to the Mercury One.1 CoreXY conversion running on Marlin (initially, it ran on Klipper, but I had a problem when my RPI 3b+ failed). I found that, in trying to dial in the coordinates for…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesCaleb

E34M1 Modified Cable Guide

Extended cable guide to add structural support

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesLayerOne

E34M1 drive sherpa mini

E34M1 drive sherpa mini removed motor mount

Pobrania
3
Polubienia
1
Ocena
5
P
PrintablesNoot

EVA3.0/E34M1 bdpressure hotend mount for V6DM Heatsink and TD6S

Modified E34M1 TD6S mount to house Pandapi3D's bdpressure Sensor. Works with Trianglelab V6DM Heatsink and Trianglelab TD6S hotend. Hardware Required: 8 M3 x 5mm OD x 4mm heat insert 4 M3 x 6mm screw 40mm x 10mm fan 2 M2.5 x 10mm screw…

Pobrania
2
Polubienia
1
Ocena
0
P
Printables

E34M1 BTT MicroProbe ABL Mount for Rapido HF and Rapido UHF

Requires two hot melt inserts. I placed the wiring on the outside so that it is easy to reach and has a smaller x-offset for the probe. I printed mine with ASA at 100% infill.

P
Printables

Depressor for E34M1

A remixed depressor for E34M1. Use a long screw (length depends on the distance you will need).

P
Printables

CR Touch Mount for E34M1

Installation and use should be fairly straight-forward. This mounts to the E34M1 toolhead and is for use with the CR Touch ABL probe. My design basis was the Phaetus Rapido hotend (not UHF). The probe should sit ~3mm above the nozzle in…

P
Printables

E34M1 Adapter for Ender 3 V3 SE/KE Ceramic Hotend

This design adapts the Ender 3 V3 SE/KE ceramic hotend to the E34M1/Eva 3 design. This hotend is a relatively easy to find, cost effective way to get 300C and high-flow printing capabilities with an all metal hotend design and 60W ceramic…

P
Printables

Ender 5 Pro & Plus - EVA 3 Toolhead - E34M1 Remix - Stock Cartesian & Endorphin - MGN12H or MGN9H Linear Rail / Single 6mm Belt / Front / Z Rod drop Brackets

Work In Progress - Not fully tested Couldn't afford to convert to Mercury One.1 straight away so came up with these parts to gradually upgrade on a budget without having to replace a bunch of parts along the way. Remixed the E34M1…