2776 modeli
This fully functional Cryptex has an easily changeable code and is modeled after the Cryptex described in the novel 'The Da Vinci Code' by Dan Brown. (Thank you Prusa team for this wonderful video of the Cryptex) Design I made this…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
You can create am Arduino obstacle avoiding robot or a sumo robot, remote control car or even a line follower. Add more sensors depending of what you want your robot to be. Otto is super easy to make, assemble and code. You have plenty…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
I have made a garage for small cars! Especially made for Hot Wheels -sized cars, the garage is available in two sizes. The small one for most of the cars, and the tall one for taller cars! It can be stacked upwards, so it can be displayed…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…
Wydruk około 6,68 €–8,16 € nettoWstępna wycena jednego wariantu
Basic track connector for hot wheels track
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Track piece to extend this circuit. Short and medium rail have the same length that original parts. Half short is, as it sound, half the size of the short one. It usefull to fill gap in some cases. Print instruction: Supports needed for…
Wydruk około 4,68 €–5,71 € nettoWstępna wycena jednego wariantu
Crazy Cart upgrade of swivel wheels. Requires $5 of hardware store parts and old wheel components. YouTube Assembly Tutorial: Sizes: 3D printed housing fit wheels with dimensions roughly ~75mm x 45mm Recommended Wheels: Quality…
Wydruk około 19,67 €–24,04 € nettoWstępna wycena jednego wariantu
1/64 Diecast Car Display Stand: Compatible with Hot Wheels, Matchbox, and More! Fast and Easy Printing.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
This model has been designed for mounting high-voltage electrical wire or fiber optic cable reels on flatcars or as 1/87th scale industrial landscape decorations. Best results are obtained in FDM with a 0.25 mm nozzle and a 0.05 mm layer…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set of HotWheels and Matchbox logos. Use a pause in height to change color. STEP logo files are included and can be edited. For non-commercial use only. Printer setup: Nozzle diameter 0.25/0.4/0.6 10% infill Layer height 0.20mm no supports
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
Wydruk około 11,26 €–13,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Llavero con símbolo de Treasure Hunt de Hot Wheels. Imprimir a dos tonos.
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
11/13/2022 UPDATE I removed the old handle and uploaded a new version. My second version cracked so I increased the height of the locking tabs by 2mm. It fits tighter now. I made the handles more printer friendly and they are less…
Wydruk około 4,20 €–5,13 € nettoWstępna wycena jednego wariantu
Printer: MK4s Layer Height: 0.25mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed: No Infill: 15% Print times: Total: 5h29m / 55m white / 4h34m black Need help? Find me on Discord: https://discord.gg/NndzwJvN
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since the MMU3 can have issues if there is too much tension in the filament, an easy upgrade to reduce friction is to upgrade the plastic wheels in the spool holders. Skateboard bearings are great for this. To use this, you will need to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
The demonstrator of cog wheel 02 is a result of engineering done step by step from desing to production. Cog 20. Modul 2,5. Ra=da=55mm. Axis distance 50mm.
Wydruk około 3,03 €–3,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I purchased some 775 motors with a 19 tooth pinion gear from online with the objective to mount it to my kids' PowerWheels. Didn't get around to it until recently. The 19T pinion doesn't line up with the stock gears and as such it needs…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was the car that initiated my hotwheels collection. I thought it deserved a basic display in order for it to stand out from the rest of my collection. I tried to keep it basic so it wouldn't take the focus off the car. ---UPDATE--- I…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
As the Redcat Ascent 32 was launched, nobody made aftermarket wheels for it - so I created the replacement hex that converts from the Ascent 32 axle up to the standard hex size for 1.0" wheels. I printed in PLA on my Elegoo Neptune 4 Max.…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Hotheels logo printed in multiple colors to be backlit with LEDs. Not Requires an AMS / MMU it's a multi-color print, contain separated parts to fit. I use petg but it could be much better with PLA, I haven't tried it with pla yet.
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some…
Wydruk około 12,38 €–15,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fun Hotwheels tunnels for 4 lane raise track or 2 lane monster truck race. Can be joined together to create longer tunnel, why not create your own little Monaco
Wydruk około 8,29 €–10,13 € nettoWstępna wycena jednego wariantu
Center caps with a Chevy theme. Tricolor and single color print files.
Wydruk około 6,95 €–8,49 € nettoWstępna wycena jednego wariantu
This is a bracket that fits a $20 electronic tape measure from Amazon. This bracket holds 8mm wide component tape. I highly suggest using "snug" supports at 0.2mm contact distance, and use top surface ironing for best fit. Search amazon…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Additional M2x6mm screws are needed. Simply unscrew all four existing screws and place the adaptor on top of the plastic cover. M2 screws should just fit in without any problems. Do not use extensive force! Afterwards, any SteelSeries…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
This is a model for wheels compatible with old TYCO slot cars. These are really easy to print, just requires a brim around the part and/or some glue stick for bed adhesion. Mine are printed in PLA and work great. If the hole is slightly…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
FINALLY! A cheap and easy way to stack my RLC acrylic case cars. This is a simple bracket that will allow you to stack any RLC acrylic cases on top of each other avoiding that annoying wiggle and slanted look.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Printed with 0.25 Draft on Prusa Mini.
Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These will fit the WL Toys P929 and any other similar 1/28th scale car from WLtoys. I made them to fit a more scale body to my car, with narrower wheel arches. I printed the wheel in PLA and I am testing variants of the tire with TPU and…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
17'' (or any) wheels holder fits both the front and rear wheel (3.5/5) no supports needed you can scale it up or adjust it for any wheel simple and nice model for both exhibition and wheel service
Wydruk około 6,65 €–8,13 € nettoWstępna wycena jednego wariantu
custom supports to hold the rods that the rolls sit on
Wydruk około 3,45 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2D wall art of Ford Mustang Fastback 10
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Custom wheels for the fire competition distributor - individual fire sport. Suitable for M16 screw - thread in model. Before use, it is a good idea to adjust the thread with a tap. My recommended print settings: 4 perimeters, 50 % infill,…
Wydruk około 3,88 €–4,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Potřeboval jsem zvýšit rozkládací gauč, aby se mi pod ním nezasekával robotický vysavač / I needed to raise my sofa bed so that my robot vacuum cleaner wouldn't get stuck under it
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Upgrade for the original, standard houses and hotels of the Mickey Mouse 75th Anniversary Collector's Edition monopoly. Contains the reels and vaults that upgrade the property development tokens. I used a .4mm nozzle due to time and they…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
It is able to be printed on a standard ender 3 bed. If you decide to remix it, even on other platforms, please give credit. From my experience, this model prints very well in PLA and Bambu Lab PETG HF but has some difficulties with the…
See also 1:64 stackable sea container (works well with HotWheels) My other printables for 1:64 display I've also created more models that you can be stacked horizontally as well as vertically. Below is a preview of the display shelf you…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This is a remix of another remix I found. I made it so the full tower was cut into individual car components that easily and strongly connect with no adhesives needed. I split it into two separate versions, a base and a stacked version.…
Remix of a remix of the Hotwheels curve track piece with adjusted clip sizing. Changes were made to the legs to clean up geometry and artifacts. Sharp edges where smoothed where possible and slot openings where adjusted to fit the latest…
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
This model is a simple looping for connecting with Hot Wheels tracks.
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
I improved this model so you can print it without supports all over the place. You only need a line down the middle, as I show in the 3mf file, for the ones without holes, or a small amount around the connectors for the ones with holes.…
I don't have enough Hot Wheels track to make a cool stunt course, and the track packs are expensive, so I made my own track system. It is slightly wider than standard Hot Wheels track. The barriers are about the same height and more…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
Standard Hotwheels connector. This one is much more comfortable when comes to detach roads.
Supports needed in the connector areas, everything else is self supporting. Nice small little ramp for inline jumps but is speed sensitive.
Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…
I wanted a clean looking dual connecter which was hidden once the tracks were connected. Set of connectors which allow you to connect 1, 2, 3, 4, or 6 tracks in parallel. Dual connector works great for Hot wheels monster trucks. Supports…
A display for hot wheels. The tolerances are tight so you have to heat it up a little to get the parts to fit together. Alternatively you could scale up the shelf and logo and glue it. I corrected the scale of the shelf. Sorry for the…
A Model Car Display designed for 1/64 diecast Hotwheels cars. It also works with other 1/64 car models like Matchbox. It works great and it's fast to print.
Insert hotwheels card into slot and position it so that the name of the car is visible. Hope you enjoy this model! :)
These digital 3D printable models of Clay Wheels are meant to be used to create textures in clay and polymer clay, pottery clay, cake dough, fondant, fabric, and other materials. The download contains 18 OBJ files (reversed patterns…
Still requires print supports on the part where the hot wheels track clips in.
This page is only a summary and may not have all the latest updates. The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed…
My own Hot Wheels track piece, Something I felt was missing from what is sold. Works with most cars at medium speed, just don't overdo it. Connects to any Hot Wheels track with a connector, both my connectors and the Mattel ones work.…
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
After print, I decided to this model needed some improvements, and i created version 2. You can print, upload and say your comments about printed thing. I'm waiting your response :) V2 includes this improvements: - Support line for the…
Has a surprisingly large range of movement for high heels, spacing for toes are slightly increased to compensate for thicker shoe tips.
Update 28.11.2024: New better Beta Version with connector. Update 28.04.2024: As requested by a user, i added the first BETA version of the trackholder with connector. Due to the support, the surface is unfortunately not 100% beautiful,…
This is a recreation of the Hot Wheels retail packaging that the cars are sold in, minus the plastic blister that holds the actual car. I needed this for the display stand that I created to fit a 1:18 scale model, which can be found here:…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
Remix of a hot wheels launcher that allows the launcher base to connect to standard hot wheels track. Requires two printed parts and a rubber band. Requires supports. I printed at 0.2 mm height and print came out nice.
No necesita soportes pero se debe ubicar bien, si este modelo no cabe en tu impresora tambien esta el modelo compacto.
This is my current solution for storing my 1/64 scale models. After some experimenting I came up with this design. I wanted it to be very simple (just two parts), easily printable, compact, stackable and ability to add and remove models…
Ramps for Hot wheels cars and monster trucks Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 12 Notes: Need supports for the connector area. The rest of the ramp is self supported. Category: Playsets
Update 10/24/23 Updated model now has far higher detail on the wheels I remixed the Nissan Skyline GTR model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly…
Ever had one of these break? Want more of them or in different colors? These should fit perfectly in any track. Print with supports, 0.2 is fine. I usually print on my Ender 3 Pro using PrusaSlicer, if the tolerances differ on my new…
display for your 1/64 diecast cars, remixed I really liked the model by aonarcan. while slicing I noticed that the first layer could be better. I noticed the bridging that is unnecessary there. after I modified the model this problem is…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
Various wheels from Rocket League. These are a bit outdated and do not include most of the wheels that come from crates. Getting the game files takes a lot of time and I have not done it in a while. Some export weird and may not be…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…
Update 2024-01-28 Added hex display module with more stable standing base for bottom row Also added variation of it with 60x10mm label insert Added hex display module with 3mm screw holes for attaching to a board, shelf or wall 1:64…
An adapted version of the vectored intake wheels to use in FTC with 5mm hex rev shaft. Use of m4 inserts with heat set inserts to pack them close together.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Made a ramp for hot wheels cars to use for son's Mario kart track. We did not like the launcher that was included, which mostly shot the cars out of the track. The start gate arm is assembled with two M3 skrews, 20mm and 12mm length. No…
These 3D models of Lego train wheels have been optimized for 3D printing. The models included are: 55423 (Small Train Wheel) 85489a (Blind Driver) 85489b (Flanged Driver) These 3D models of Lego train wheels have been slightly modified…
Hanger that slides onto the bottom of Hot Wheels Track. Then hooks onto string or cable. Note: Print file is four (4) hangers, an individual hanger takes about 20 minutes. Testing shows about one hanger per two pieces of track for best…
🧩 Hexagonal Wall Display Pack – Automotive Collection Edition Transform your miniature collection into a true automotive gallery with this exclusive modular hexagonal display pack ! Designed for collectors who appreciate both design and…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This model will allow your kids (or, let's be honest, you) to connect any hot wheels track to any horizontal surface of a small enough thickness. Tables, book shelves, window sills… the world is now your launch pad. Includes hot wheels…
Car trailer with ramp. Connect the trailer by tilting it in an angle from above. Wheels and hinges fit for 1.2 mm nails with a snug fit - no glue needed. STL split into 3 files for easy separate slicing.
Material: PET-G Layer high: 0.2mm Perimeters: 4 (5 for connector) Infill: 30% Cubic Holes for connectors are blind because of reliable printing. Drill them by 5-5,5mm drill. Big square is modifier - you can set bottom layers to 0, it…
This is a simple mechanical start gate for HotWheels / Diecast 1/64 cars. Designed by PlayRobotics. This gate is really simple to print and assemble. In addition to the printed parts you will only need two M3 screws (20mm & 12mm long).…
A remix of a hot wheels car ramp extending it to fit 1/64 scale monster trucks! (hot wheels or monster jam). accepts two standard hot wheels track connectors to help line up monster trucks for the big jump! print oriented with the Xes on…
Initially, I designed this wheel for on-road drifting. I created it for the Traxxas E-Revo 1/16 (VXL), but it may also fit other RC cars with a 12mm hex wheel carrier. The front wheels are slightly narrower to provide enough steering…
Changelog: 5.7.2021 Added a “short” 160mm version for easier printing on the Prusa Mini.
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Holds 12 cars Can friction fit multiple shelfs together The dimensions of the rectangles are 3.2"x1"x1.4" (LxHxW) Screw hole is .2in diameter, will fit max. #10 screw
These are pieces to connect your new Snap-Track Hotwheels sets to older “e-track”. Snap-track is directional, so there are adapters for each end. Designed to be printed on a FDM printer. Has not been tested on SLA printers.
CAD based ramp for Hot Wheels tracks
Hot Wheels starting gate in which the base has been modified to support being mounted to a Hot Wheels track connector. This allows it to be mounted on something like a desk clamp (as seen in pictures).
Elegant 3D printable Clay Wheels ✨They're perfect for adding beautiful Aztec-inspired textures to all kinds of materials like clay, polymer clay, pottery, cake dough, fondant, fabric, and more! 3 patterns in STL print-in-place handle Size…
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA is easier to print and comes off the build…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
