2903 modeli
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
2 part sleeve case for the Raspberry Pi 3, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shuffles double-sleeved Magic The Gathering cards, or another variation that shuffles single-sleeved It's A Wonderful World cards. Instructions for Magic The Gathering Shuffler Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This Pokemon TCG Deck Case is made to store sleeved cards. It holds a 60 cards deck as well as a Pokemon Coin, that usually comes with the official decks. I made some different styles of the Topcases. To print these cases in multicollor,…
Wydruk około 6,76 €–8,26 € nettoWstępna wycena jednego wariantu
This is a slim and configurable case for a Raspberry Pi 3B. It's not a case for systems that runs a heavy load for a long time, but my 3 Pis (pi-hole, openHAB, octoPring) do run with a temperature between 45°C and 55°C measured during…
Wydruk około 2,90 €–3,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by https://www.reddit.com/r/voroncorexy/comments/ajyzxb/new_80t_gears_details_in_the_comment/ HINT : Voron moved away from printed Z gears. This is only a makeshift alternative…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
Update - 07/09/23 Yet another tweak, whilst sleeved cards did fit in the deck box they were a little tight around the lid, I have now fixed this issue :) UPDATE - 06/09/23 I have tweaked tolerances on a couple of the parts so the logo and…
Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu
Un Evoli avec un anneau afin de faire un porte clef.
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
The box can be closed with a simple sliding mechanism. I have made 2 different types of latches: Flat ones that are exactly as high as the lid Latches with a small hook, so that they are easier to open. If you love this design and want to…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Print in separate part (orange and white) for better results, gluing pieces together. You can scale it to 200% without issue. No support required.
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Clamp that retains X Stepper wire and sleeve. Eliminates bending action when Z travels up and Down. Print instructions Use 3mmx10mm screws with 3mm hex nuts. Requires large Zip tie to fasten to Motor.
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Catan board game card holder - with card sleeves compatible For cards dimension: 68x44mm (only card) / 70x47mm (card with sleeves) The models in the photos are printed on 0.1 layer height. It is advisable to glue the foam legs to the…
Wydruk około 8,90 €–10,88 € nettoWstępna wycena jednego wariantu
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Wydruk około 15,36 €–18,78 € nettoWstępna wycena jednego wariantu
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Reusable coffee cup sleeve for the Starbucks grande reusable cups. Not dishwasher safe!
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this Filament Roll Sleeve that slips over a Prusa spool holder to allow smooth rotation of the filament spool when using spools that snag or that provide high resistance when turning on the spool holder. See the photos for…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drying stand for the Solace adult toy from Lovense. You can print it as one object, but I cut it in half in the slicing software, so I didn't have to use supports. Then glued it together with superglue. (Loctite Precision Max)
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
Color: White / Champagne / Silk white Materiel: PLA / PLA+ Brim: Required, smooth sheet recommended (strong adhesion required for printing)
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
1.Necessity. Incompatibility due to size of TRS straight jacks that protrude too much for the required application. From a size of 50mm to 20mm. 2. Solution. Manufacture with MDF printer (Fused Deposition Modeling) an angled housing where…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
The STL file does not have the text on it. The gcode has (using prucaslicer).
Wydruk około 0,78 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hexanogal multi-purpose can holder / sleeve that you can use to fasten regular cans with 66mm diameter to car boot / trunk or wherever you like. Just add velcro tape in the space reserved for it. No supports needed with 0.2 layer height.…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu
These are sleeves you can put on your Abus keys for easier identification when you have several of them. I've made 3 versions: Version A: Simple cover, matching the key's keyring hole Printed vertically with organic/tree supports Version…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a decorative display stand for Stabilo pens. They have a diameter (flat sides) of 7.8mm, check if yours have the same size before printing. "sleeve.stl" is the base model, the other two have minor modifications for variety.…
Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu
The FNIRDSI DSO-TC4 is a multifunctional transistor oscilloscope, to protect its display I created a cover / sleeve. It is a snug fit, the lever of the transistor tester can be used to lock the cover. I printed the cover / sleeve with the…
Wydruk około 4,83 €–5,90 € nettoWstępna wycena jednego wariantu
If you use Prusament (or similar standard-size spools) and find the stock Core One+ spool holder annoying because of the bayonet-style notches that catch on the spool, this is for you. I designed this smooth sleeve adapter that slips onto…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
In my WC there is a 110mm water pipe running through the room (top-down). As a simple optical upgrade, I want to decorate the ends of the water pipe with a deco-pipe-sleeve that can be assembled without changing the water pipe. This is my…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
Print in Vase mode, no floor layer. Should take only 40-50min in most 0.4mm printers. Might need spacers to work in a 26800 flashlight, I used 4 of the Convoy 26mm spacers for my D4Sv2. Printed using 0.4mm Ender 3 v2 Designed in FreeCAD…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
The work tray on the Park Tool PCS-10.3 Deluxe Mechanic Repair Stand has holes for tools, but loose L-shaped hex keys sit unevenly and the smaller ones can fall through. This insert fits snuggly in the holes on one side of the repair…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
The flimsy sleeve that protects the siphon trap cut out of our Schildmeyer Trient Basin Cabinet (sold by ALDI Germany as Ambio Waschbeckenunterschrank) became loose over time. This exposed the edges of particle board which are prone to…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Simple firesteel protection for storage in a box.
Wydruk około 0,46 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
While printing for a long time, I noticed that the cardboard roll wears out, which creates dust, which is an undesirable phenomenon when the bed is closed. The sleeves effectively reduce this, so there is no dust at all.
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
Absolutely love the idea by @LeonH for the monster trays and other card holders. I printed all in PLA (prusament galaxy black / eSun fire red / eSun white/Sunlu green (turquoise)) with 0.6 nozzle and 0.3mm layer height (text with 0.2mm).…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
While I'm sure it was fine, the idea of metal on glass made me uncomfortable, especially under a clamping load. I also noticed there's potential for water to find its way out of the tank via capillary action and I wanted to prevent that…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clear Travel Mug https://www.muji.com/sg/products/cmdty/detail/4550512399964 Suggested print settings: Layer height 0.2mm. Infill 50%. Perimeters: 5. No supports are needed but follow the suggested print orientation for ideal results. If…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
While I'm sure it was fine, the idea of metal on glass made me uncomfortable, especially under a clamping load. I also noticed there's potential for water to find its way out of the tank via capillary action and I wanted to prevent that…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: Simple chinese pasta roller shaft sleeve replacement. I did the measurements from my machine! It's a test model, may need some adjustments. -- HU: Egyszerű, piacon kapható tészta nyújtó gép tengely persely javító. Ez a modell saját…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
A nice Mini Bic lighter sleeve, that feels very tactile. It has holes to attach paracord and when the lighter is reversed, the sleeve protects the gas lever from accidental discharge. J25 is the official model number of the Mini Bic…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) I used coin artwork from the Pokemon card…
Eevee and all her evolutions, all scaled and with organic supports (PrusaSlicer 2.6) all setup. These are excellent models and perfect for painting. They are approximately 38% of the original model size, and have been simplified to ~60k…
Looking for an attractive and flexible storage system to organize and protect your trading cards? Don't banish your hard sought collectibles to flimsy generic cardboard boxes in the back of your closet, store them in style in these…
Add a touch of elegance to your everyday lighter with this 3D printable sleeve, featuring a delicate floral ornament design. Designed to snugly fit a standard BIC lighter, it transforms a simple object into a stylish, decorative…
Inspired by custom gun grips, my new Bic Lighter Sleeve has an awesome tactile hand feel, gives a satisfying POP when you remove the Bic, and I think it looks bad ass! Check out Dragon Scales 2.0 👇 There's a fin inside to keep a good grip…
The QuickDraw Sleeve & Toploader Dispenser is a premium storage solution specifically designed for efficient organization and dispensing of your trading card sleeves and toploaders. Its innovative design enables hassle-free storage and…
Create the perfect Valentine’s Day accessory with this 3D-printable Bic lighter sleeve, featuring elegant heart-shaped cutouts that add a touch of romance to a practical item. The design celebrates both the warmth of love and the spark…
If you download the model, please don't forget to leave a like. Thank you! <3 Delight in the charming essence of Eevee with this low poly geometric 3D print. This design beautifully renders the beloved Pokémon in minimalist, angular…
Download Eevee now for completely free Subscribers have complete access to the remaining 3 Pokemon along with display stand and commercial licence. Includes Hi-resolution versions & painted profiles. Recommended tree supports & thin walls…
My new Bic Lighter Sleeves have an awesome tactile hand feel, give a satisfying POP when you remove the Bic, and who doesn't love dragon scales!? 🐲 There's a fin inside to keep a good grip on your lighter while still allowing it to be…
A nice Bic lighter sleeve, that feels very tactile. It has holes to attach paracord and when the lighter is reversed, the sleeve protects the gas lever from accidental discharge. Used silk Black&Green PLA. Не удержался и напечатал еще…
2 part sleeve case for the Raspberry Pi 4, their spilt in the middle of the headphone jack. The 2 parts of the case slides over Raspberry Pi, and held together by friction between the 2 part of the case and the Raspberry Pi. So no need of…
Just a simple sleeve to go around a clipper lighter. I printed mine in TPU, should work in other materials also. working on V2
I currently into Dirtywave M8 Headless tracker but I'm not found any simple case for my Teensy 4.1. So I created one. Models come with 2 type of lid: Teensy41Lid: Standard lid with ventilation holes Teensy41Lid_heatsink: Cutout lid for…
Inspired by Snactiv ( https://snactiv.life ), these are wearable chopsticks that allow you to snack without getting your fingers dirty. Perfect for when you're working, gaming, chilling on your phone, ... A sleeve is included to keep the…
https://www.cgtrader.com/body3d Evoli ( Pokémon ) Créée sur ZBrush BODY3D https://www.youtube.com/c/BODY3D?sub_confirmation=1 Diorama Cyclope & Jean : https://youtu.be/d51IaDLtU7g Category: Art Tools
Big Eeveelution fan? Looking for the whole set of 9 models? Find the rest of them over on my Patreon ! Or Show your support by buying me a coffee ! So which eeveelution is your favorite? I personally think Jolteon, but that's just because…
Introducing a contemporary, artistically designed sleeve for your Bic lighter that combines functionality with modern aesthetics. The sleeve features wavy, chamfered embossing, providing a secure grip while showcasing the lighter’s color.…
Keep your energy drinks cool and "Dragon-y"! My drink sleeves have an awesome feel and they look sweet! I recommend 3 walls and less infill for better insulation and greater strength. This version fits a tall (1pt) Monster Energy, or any…
Please Attributions go to: https://www.printables.com/@dtxtr_339032
Eevee - low poly (pokemon) Let me know which Pokémon you'd like me to make in the comments!
Add a bold, edgy touch to your lighter with this Wall of Skulls BIC Cover. Designed for standard BIC lighters, this 3D-printed sleeve features a detailed, textured brick wall embedded with eerie, lifelike skulls. The intricate design…
Thank you for printing my models. It means very much to me! Some 3D printed models from this community have put a much-needed smile on my face on some days. So I hope I can make my contribution and delight you with my creations. If you…
I made this piggy bank of Eevee from Pokemon, i'm going to made another one from other Pokemon very soon. I made it with the build volume of the Bambu Lab P1S in mind. If you have a printer the same size or bigger you are not going to…
Enlarged and redesigned Mini Bic J25 Lighter Sleeve v.2. Add some features
Printed the original sleeve and made the rookie mistake of not paying attention/checking measurements. I quickly realized the original was intended for a mini-Bic lighter. I really liked the design, and I rarely use minis, so I remixed…
Needed a eevee piggybank, found the low poly eevee by Agustin, which I used as a base, scaled it up and made it similar in size to https://www.printables.com/model/116879-starter-pokemon-piggy-banks and uses the same cap for sealing. Note…
Pokemon Cookie Cutter Set / Pikachu Eevee Pokeball The cookie cutter is around 75mm Its a 2 piece item, one for cutting the cookie dough and one for modeling . Print with 100% infill If you have any idea/request let me know :D
If you have the Matcha expansion, you might be interested in my insert that adds support for Matcha . UPDATE 12/23/2023 Based on feedback I've received and my own continued use of these models, I have updated two of the boxes.…
Print Settings I printed a few iterations, at .02 mm layer height. The one pictured is not the final model and was printed before I decided to bulk up and smooth out the hanger portion. Consider Your Filament Please be careful with any 3D…
very cool with silk pla, printed at 1.16, no supports
When Halloween’s shadows awaken and the night grows cold, let this little Jack-o’-Lantern guardian stand watch. Light your spooky candles, summon a flickering glow, and keep a flame close at hand—lest some grisly ghoul come creeping from…
One of our exciting releases of a headphone or headset stand featuring a favourite Pokemon of ours.. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and can be glued…
really loved the mini darth vader, so i made one that fits perfectly a clipper lighter thanks to funda clipper cover, looks great spray painted shiny black remix from https://www.thingiverse.com/thing:2936081…
Overview: A 3-piece bolt-together magazine sleeve designed to fit over the 10 round polymer magazines of the Derya TM-22 for an improved, P-Mag styled look. 2 versions available - one with a cutout to add spent brass, and one without. I…
Modular LED channels for hexagonal acoustic (or 3D printed) panels. The channels are designed to be printed with 0,4mm nozzle. Assembly material: Hexagonal Acoustic Panels 30cm x 26cm 3D printed Channels LED Strip: Minimum 60 LED/meter (…
Here we have a spacer that will utilize one of the OEM base plates from a 12rd magazine, and fill in the gaps around the 15 rounder to make it comfier for your hand. I personally printed with fuzzy skin, but you do not need to. Nothing is…
This is a sleeve for the Apple AirPods 3rd generation. I printed them in Ninjaflex 85A (shore hardness). Other flex materials might work aswell. I also added modifier to generate a cutout for the charching LED and / or a engraving of your…
A rugged, no-nonsense Bic lighter sleeve designed to look like it’s been forged, hammered, and built to last. The bold, faceted texture gives it the feel of hand-worked metal, adding grit and character to an everyday essential. Print it…
It is a remix of Phatcros' beatiful design. I have remixed it to make it shorter to fit my clipper lighters just how I wanted. This remix is for Clipper Lighters that are 50-51 mms long without the metal cover.
########################################################### Update 2025-02-05 Redid a few things to support the expansion From the Abyss all in the main core box. Still supports sleeved cards. Still supports my custom meeples for…
Good working sleeves for XT-60 connectors. Larger holes so it works with 4mmq wires and inside more room so it will snap on. Snap on but better to use a little drop of CA My favourite material is TPU but PLA works fine.
This is an all-in-one tap and drill guide for 2020 Misumi aluminum extrusions. 2020 comes with a center hole so this guides the tap in so you do not tap crooked. There are also 2 and 4mm drill bit guides to drill wrench access holes.…
looks good with dual color filaments, no supports, print at 1.16 quality
Basic insert for Gloomhaven: Buttons & Bugs. Supports SleeveKings standard thickness sleeves I have thought for better token storage but nothing else that I could make work in the available space. There is about 2mm of lid lift (proof…
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
We all know how hard it is to put the bed cables into the textile sleeve. This tool helps you solve this exact issue. You of course need another printer to print it on, so if Prusa is your first printer, then it won't help you much but it…
Updated on 12/22/22 Filleted the corners to make it nicer to carry without pointy edges and to make it easier to print. Updated on 9/23/22 After receiving feedback, I have updated the file to make the shuffler much easier to use and is…
This 3D printable Bic lighter sleeve features an intricate Voronoi texture , combining elegance, functionality, and practicality. The organic cutout pattern not only showcases the solid color of the lighter beneath for a striking contrast…
fits clipper perfectly, has a hole in the bottom so you can refill your clipper (and helps to remove it from the sleeve) printed in translucent tpu, but i bet painted stone colour looks great, i suggest using supports
Triggered by a community request, I adapted the original case so that it fits a Raspberry Pi 3B +.Test prints are done by the community, too.You can find more details here: https://twitter.com/spikeinkent/status/1294704712101527553 The…
I printed mine in PLA+. Probably better off in PETG, nylon or ABS but 🤷
Il mio bambino desiderava questa moneta dei Pokemon, così gliel'ho fatta copiandola da un'immagine e trasformandola per la stampa 3D. Stampata con Prusa Mini + , Prusament Galaxy Black e Oh My Gold, layer 0,15 mm
I just added this assembly to have everything in place needed for a complete support of an 30 cm or 40 cm sized Eurobox ("Bauhaus" version). You can just load the complete print bed definition. Everything prints fine w/o supports in 0.3…
Simple Enclosure/Sleeve for a 5.25" DVD or Blu-Ray Drive. Designed for the shorter 170mm drives. Hole at the back is for an Inateck UA1001 SATA to USB3 adapter, which is the neatest/smallest one I could find (…
Complete re-design of real1up 's “Wingspan Organizer (Basegame + European + Oceania)” that is accommodating for sleeved cards. In order to make enough room for the sleeved cards, the original player boards will have to be removed. This…
Keeps the R36S protected pretty well! Print with the screen side up, paint supports near the triggers and around the smaller button holes. Have some precision scissors ready to get rid of stringing! I printed this with Overture high speed…
Keep your 12oz can drink refreshingly cold with our Hexagon-themed can koozie sleeve! This stylish accessory is perfect for keeping your favorite beverage icy-cold on a hot day, without compromising on taste or quality. With our…
