Liczymy pasujące modele…
I've been enjoying making nooks and places for my shrimp and fish to hang out in. Caves are a great addition and really expand the unused space of the substrate.
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
A simple holder for the Ikea Skadis system to organise thread reels
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
I used to operate auto rewinder spool holders like https://www.printables.com/model/199248-narrow-double-stand-for-75mm-integrated-auto-rewin inside my dry-box. The challenge with those was that it always was kind of some fiddling with…
Wydruk około 8,49 €–10,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Da ich keine passenden Muttern für die Gewindestange (für eine DIY FilamentBox) hatte, hab ich mal kurz selbst welche entworfen. Am Anfang gehen die Muttern etwas schwerfällig aber wenn sie einmal drauf sind, kann man sie gut drehen. Ich…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
english There are so many tube squeezers out there, but I have never seen the slot angled on any of them. I find that the angled slot allows the tube to be pushed out directly with the printed part. Inspired by the most diverse squeezers…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing the "Sewing Tool: Thang and loop pressing bar"! This innovative tool seamlessly combines the precision of the "That Purple Thang" with the functionality of the Loop Pressing Bar . The "That Purple Thang" excels in maneuvering…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
This is a space for shrimp (or fish like our Kuhli Loaches) to hang out in away from the bigger fish. It also adds more space for your bottom feeders to hide but where you can still see them. It will float so I recommend putting some…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
I present to you fully parametric boxy things dispenser - update from my previous model now with view port and lid. You can use it for anything with boxy shape, I use it for dishwasher tablets. Saves space and I can't get over how…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
Bring a used-up Sharpie marker back to life as a handy bit driver. Two different model files - one for typical ¼" bits, a second for 4mm electronics bits. Bit is held securely by a 6mm diameter by 3mm thick neodymium magnet printed in…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Obviously I don't own the LEGO ® brand, and the fact that this fits their bricks doesn't mean they support this model. Go buy their products if you want quality, this is just an homage to their brand, not a LEGO ® supported product. I…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
A compact, sub $10 dry-box that is easy to open, portable, and can be removed and capped off for longer storage, compatible with Vincent's Auto-rewind spool mechanism. Print instructions I wasn't happy with the existing drybox offerings I…
Wydruk około 3,08 €–3,76 € nettoWstępna wycena jednego wariantu
Nähfuss-Halterung für BERNINA und SKADIS. Drei Versionen: - normal - grössere Füsse - normal mit extra Halter für den Fuss 3A. → Siehe Bilder *** Sewingmachine foot holder for BERNINA and SKADIS. Three versions: - normal - bigger feets -…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These Saddles (regular and short versions) replace the rollers in @GunplaMark 's The Ultimate Cereal Container Filament Drybox - Official Remix to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit diesem Werkzeug kann die Brüheinheit des Siemens EQ 9 Kaffeevollautomaten bewegt werden, was die Reinigung und Wartung vereinfacht. Es ist keine Unterstützung nötig. Google translator With this tool, the brewing unit of the Siemens EQ…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the spring used in VincentGroenhuis' awesome Universal Auto-Rewind Spool Holder. I use 5 of these on my Prusa i3 mk3s MMU2.0 setup as a replacement for the prusa fiber buffer. They reliably rewind fiber onto the spools…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This Drum , Drum Cap , and Spring Assembly is part of my Auto-Rewinder for Ultimate Filament Drybox mashup. It is published as a separate model only because of different licensing for the original model. Stretched drum, drum cap, and…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sewing box divided into three parts to facilitate printing: There's one file for the structure, another for the drawers and a third one for the handles. The position of the models optimizes printing time and saves material. This model has…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I am new to 3D printing and wanted a project for my first newly purchased Prusa MK4 after printing the provided examples. My wife started sewing recently and she wanted a small box for storing her sewing bobbins. I used SketchUp Free to…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Ein druckbarer Gabelkopf für kleine RC-Modelle. Möglich wird dieser Druck durch die neuen Organischen Stützstrukturen ab Prusa Slicer 2.6. Wichtig ist, dass er in der skizzierten Lage (Bilder, Code) ausgedruckt wird. PETG ist als Filment…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
print settings: PLA works fine! Happy printing :)!
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. Damit können Gewindeeinsätze rechtwinklig in Bauteile eingebaut werden. Wenn der Druck korrekt ausgerichtet, wird keine Unterstützung benötigt (siehe 3mf-Dateien). Die…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Every sewing project needs a different color, and for every color a new coil have to set up. I just lost the overview wherefore I made a simple carrier to keep them organized somehow. It works for standard sewing machine bottom coils (at…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are two types of flower-shaped sewing practice boards for children. They can practice safely with a blunt sewing needle. Finished products will be beautiful handcrafted gifts or cute home decorations. Dimensions: height: 150 mm…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
My Wife wanted to buy those Donut weights from a content Creator, but they were out of Stock, so I made her even heavier ones. Also iterated on the design. If you use one of those fancy build plates with a pattern make sure to get a good…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Dieser Griff ermöglicht es, das Kindle Paperwhite 12th Generation (2024) besser zu halten. Er wird einfach angeklipst und die Position kann individuell festgelegt werden. Da sich der Knopf in der Mitte befindet, ist er sowohl für die…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: ….I used David Glaze 's Silent Auto-Rewinding Gravity Spoolholder (reworked Michal Fanta 's original Gravity…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Additional spool for sewing machine automatic rewinder. Usefull tool when you have only big overlock spools but need the small ones.
Wydruk około 0,19 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A mount for a 5015 fan in combination with a correct adjusted fan duct. Its made for Artillery Sidewinder X2 (maybe it is also compatible for X1 and Genius Pro). It's made of 2 parts - a front and a back part. Both are easy to print (but…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
I made a cutout of the lower part of the sign, to have a better contrast when adding it to a black background. The original design is made by Kathrine Braugiroux at Thingiverse. I have printed a smaller version in black colour and then…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This is a stirplate case designed to take one of a number of common PC fan sizes, and whatever electronics you decide to use. All you need to provide is a case fan, some strong magnets, and the electronics to drive the fan (DC power…
Wydruk około 18,22 €–22,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
držák na 24 cívek, 12 spodních a 12 vrchních nití, já to mám na oddělení stejných barev pro snadnější používání. tisknuto bez podpěr / prints without supports
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Inspired by the "Sisyphus Auto-Rewind Spool Holder" made by Vincent Groenhuis I thought it would be much better to replace the original spoolholder with one that works based on gravity as well. The main issue this spool holder solves is…
Wydruk około 7,80 €–9,53 € nettoWstępna wycena jednego wariantu
I will present this as a Sewing Machine “Game” Controller Aid, :) as a contest entry. The reason for calling it a game controller is because when I was a kid there where no Electronic games. My grandmother came up with an idea to…
Wydruk około 4,03 €–4,92 € nettoWstępna wycena jednego wariantu
Too much of sewing is pinning and measuring and I get bored easily! I got tired of making double fold straps so I made a giant bias tape maker instead. This is for 90mm/3.5 inch wide fabric strips. This was made using the customizer by…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
Integrated sewing workstation The print file includes pauses for each magnet you need to place. One that goes between the bins and the needles to secure them, and one each for the magnetic closure. Be sure to orient the magnets properly…
Wydruk około 7,50 €–9,17 € nettoWstępna wycena jednego wariantu
Replacement for pedal top of a sewing machine. (Necchi 559). After the pedal fell off a table, the top part was broken. I designed a replacement part so the safe operation of the pedal was possible again. Material: PETG or PC (The used…
Wydruk około 8,62 €–10,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Someone I love very much was an amazing designer and sewing guru, just wanted to do something to remember them today and ran across the contest. Don't forget to hug your loved ones while you can.
Wydruk około 0,72 €–0,87 € nettoWstępna wycena jednego wariantu
From FreeCAD, simply set the size of your sewing spool holder and the spools you want to use on it, then print it out. It's a first test, and perhaps not everything will be perfect. Feel free to comment on any shortcomings or ideas you…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Created the protection box for Airwaves, because after a few days in my pockets the package always was busted and the gums were floating around in my pocket. Problem solved now! Print instructions Printed it with my MK3S with PLA without…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Holder for chewing gum box (Orbit/Extra, Airways). Fits to IKEA Skadis pegboard. Print it with supports and don't forget to share a picture of your print.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I noticed that with continued use the wedge shape of my wife's sewing machine (model Janome 4300 QDC) foot control was being pushed against the wall under the worktop and the movement caused it to make marks on the decorated wall. What I…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Egg for darning socks, which can be opened into two screwable parts and contains small parts essential for sewing. Material used: PLA CRYSTAL. Only the thimble is in TPU.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A corner square for assembly of outside 90 corners using glue and nails or glue and screws, makes assembly quick + easy. Features: - Chamfers for sawdust to not skew alignment - Clamping holes - Screw holes for screwing to tablettop for…
Wydruk około 12,54 €–15,33 € nettoWstępna wycena jednego wariantu
Ich habe nach einem Hantel für Kleinkinder gesucht und habe dabei leider nichts Gutes, außerdem habe ich mein eigenes Modell entworfen und getestet, und was eine Überraschung es funktionierte. Es enthält realistische Gewichte und eine…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Helps you hide your chewing gum from nosy friends. Case is designed for standard chewing gum (20mm x 12mm x 6 mm). However it can also be used for smaller chewing gum. Dimensions of the case: 20.5mm x 25 mm x 46.5 mm
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Abgewinkelter Trichter für das Vorschubgetriebe der Bernardo P600G. Ein O-Ring mit Innendurchmesser 17 mm und Schnurstärke 2,5 mm ist nicht unbedingt notwendig, hält den Trichter aber besser im Einfülloch bzw dichtet dieses ab. Ich habe…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena jednego wariantu
DE: Durchmesser Loch: 55mm für UV Schutz in PETG oder ASA drucken EN: hole diameter: 55mm Print in UV resistance material like PETG or ASA
Wydruk około 1,71 €–2,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement for a broken blister boxes.
Wydruk około 6,72 €–8,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo, da man gerade kleinere Gewinde in den Modellen meistens ein wenig nachschneiden muss, habe ich mir dazu diesen Griff erstellt, der Werkzeughalter aus Metall war mir dafür zu unhandlich. Gedruckt aus PLA mit 3 Wänden Hello, since…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
The lower holder is very difficult to remove. This ejector helps here Der untere Halter läßt sich nur sehr schwer entfernen. Hier hilft dieser Ausstoßer It would be nice if you post your make. Thank you
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
This is a multi-part remix with new additions of other FC Mounts. This should fit into the HeeWing Ranger T1 Nicely and mount the buzzer/USB board nicely behind the FC. I am still wanting to test fit with the PDB and will do that soon, i…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The sorter allows convenient storage and sorting of small items. The individual tiers can be stacked and the upper part of the sorter can be closed with a lid. Updated. Added a lid with holes, for mounting the top handle.
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…
Wydruk około 3,04 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used a 6 mm metal rod I had lying around and redid the round part as well to make it fit well… editable flies included in case you need to adapt in some way…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Useful e.g. with the Articulated Screwiverse Arm . SolveSpace files attached for customization (you'll need the screwiverse thread for SolveSpace from the Screwiverse as well).
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
This adapter can be used to make your ABC Design Salsa 4 stroller Screwiverse -compatible. You can then for example attach one of the Tentacle Hooks to it to hang bags or other stuff securely to the handlebar. I haven't tried printing it…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu
Slightly reinforced and remodelled from scratch to be able to print. PLA, 50% infill. Supports needed and included in gcode. The hole in the middle might require slight filing to sit perfectly on the axle.
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
PLA 0,2 mm no support
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Printed in PETG. 0.4mm nozzle. 0.2mm layer height. I whipped up some hangers that fit perfectly on the .25" in front bar of the Elfa shelving I have in my office.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Another organizing addition to my wife's sewing drawer! Made it for her many seam rippers. Dimensions are 155 x 55 x 38mm with the lid on.
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
My wife started to use old, flat magnets that were previously attached to the back of shopping lists from the fridge as a means of keeping loose pins, sewing needles etc from getting lost down the side of the chair or on her workbench. I…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Spare part of broken cog in sewing machine. Printed in PLA. Use a vise to seat on the metal part (tip - print two cogs, place together from the teeth side, squeeze in the vise).
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Kept fumbling for the four tools I pretty much use every time I sit down at my Cobra Class 26 with accessory table. This was designed for the attached table and would need adjusted for stand table.
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
I'm glad to introduce you the latest version of my cantilever tool box! Take all the necessary tools with you Easy to use and store Print-only design, no metal parts or glue required Clip and snap assembly Rigid and durable PARAMETRIC.…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
Template for equal distances on the stitch.
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The AMF files of the buildplates are included. The…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
inspired from commercial product, I tuned it to suit gutterman bobines but can fit with a lot of brand. to use in combination with a clip https://www.printables.com/fr/model/249327-pfaff-sewing-machine-bobbin-cover/comments/1177551…
Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…
Each holder holds five spools of thread with a diameter of up to 35 mm. Slightly larger diameters are fine if mixed with other spools of a smaller diameter. Edit August 2026: I added a longer version that also has room for a bobbin. If…
This is a modified cable chain end mount for the Ender 3 V2, allowing the chains to be mounted so they run nicely parallel to each other and the printer. I've also added all the other bits you need to print a cable chain for the Ender 3…
⚠ Designer’s Note This model was originally created for the Prusa MMU2 to add light filament tension and reduce slack without a buffer. It still works as intended, but there are now other community designs that perform better if you need…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
This cave is the perfect addition to your aquarium. Just press it against the glass of the aquarium and cover it. The fish will have a hiding place and will be beautifully visible. An excellent trick for your ancistrus, who often breed in…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
Different sizes and types of Basic Simple buttons for your needs. 100% Infill For strength 25mm, 20mm, 15mm, 12mm Holes are 2.5mm No supports
CAD file . The supplied models are separated based on meter width, in this case 19mm and 21mm, close to the most common widths, at least from what i could find, i had a 19mm. These values are the maximum meter width that will fit. If you…
Printed in PLA I have used 50-100 infill and found both work fine
I really liked nobodyinperson 's idea.. I didn't like that the notches were visible and decided to make my own remix. CONCEPT The concept is as follows (for those who are seeing this for the first time): The insert is slotted in 6 places…
Inspired by Vincent Groenhuis Auto Rewind Spool https://www.thingiverse.com/thing:3200204 I decided I needed to make under the shelf / Hanging Spool Holders for these. This uses the metal rods and 608 bearings from the Prusa MMU spool…
Allows you to use large industrial spools of thread on a home/non-industrial sewing machine. Usage Place the holder on the right side of the sewing machine as shown on the third photo, Insert thread from the spool to the hole on the top…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Mewi curls up with pure chibi sweetness! With its round body, tiny paws, and soft adorable expression, this little kitten is designed to print completely support-free , making it clean, easy, and beginner-friendly. Perfect as a desk…
Introducing a newly designed filament rewinder with virtually endless expansion possibilities . Main Features: Modular design for easy customization Sturdy and compact construction Minimal extra parts required: 7 × 608 bearings, 2 × 3 mm…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
Angled battery holder for Milwaukee. In 2 versions. Version 1 for screwing with wood screws or version 2 for hexagonal screws. Angewinkelter Akkuhalter für Milwaukee In 2 Versionen verfügbar, Version 1 zum festschrauben mittels…
The latest 3D-designed Sewing Edge Ruler is a tool tailored for utmost precision and flexibility in sewing projects. Engineered with metric measurements, it features detailed markings for both centimeters and half-centimeters, catering to…
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
If you like this model check my other stuff, check out my www.patreon.com/wekster or my youtube channel www.youtube.com/wekster
List of buttons Geometric buttons : round , square, triangle and hexagon Japanese video games buttons : acorn, leaf, mushroom and star Dimensions of the stl file width : around 17 mm Height : 3 mm Thread Holes : 2 mm Print Settings…
YouTube Video ( https://youtube.com/shorts/rRwxUmyBnUs ) Overview This model has a top portion that holds one end of the sewing tape measure and a bottom portion that can rotate relative to the top portion. The top portion has a ring that…
![Sewing machine spool & bobbin clip {Fadenrollen Klipp} [V2] (size:= M; L) // more powerful inner clip effekt](https://media.printables.com/media/prints/900668/images/6887835_da70503f-32a6-473b-9e4c-5a68c096e3aa_526eaf59-464b-4738-b9ee-614b38f723b5/2024-06-02_23h26_07.png)
