245 modeli
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
I DID NOT MAKE THIS. I did not make this design NeoTecLabs “made” this they stole the design from Flexi Alicorn by Jeffrey Yang. but a lot of people liked what they made including me and have been asking around for the files so I am…
DNA double helix with a X-ray diffraction-inspired base in honor of Rosalind Franklin. Remixed from DNA helix by linew (https://www.thingiverse.com/thing:3980700). Rosalind Franklin's research as a chemist and X-ray crystallographer was…
3D Printed OFFROAD RC chassis 1/10 scale RC BODY available HERE Stay tuned for exciting new projects on our Facebook group For any technical support please contact the following email : [email protected] The 3 main guide listed…
RC SCALE EXPEDITION OFFROAD CAMPER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. If you like it, you can [buy me a…
🆕 Available on Etsy, from me, with free shipping These are 1:10 scale recovery boards for RC crawlers and other toys. I really made these for a fridge magnet but folks at Etsy loved it for the detail. I am sure the community here on…
Pochoirs lettres et chiffres : 2 dimensions 70mm et 90mm. Epaisseur : 1.4mm Imprimés en 0,2mm. Possibilité d'adapter aux dimensions voulues avec le slicer (uniquement X et Y) Letters and numbers stencils: 2 sizes 70mm and 90mm. Thickness:…
Just print in whatever filament you want and prefer. Can be printed without supports easely.
I've printed a couple off and made a few adjustments.. Gluing RC Buggy tires can be a bit messy at times. Especially if you're a newbie like me ha! I saw a few "Tire Gluing Jigs" from various RC companies that help to press the tire down…
I designed this pod for use with inexpensive Pyle Audio Marine Speakers . Will probably need dimensional adjustment for correctly mounting speakers from different manufacturers. Includes two small drain holes, wiring hole, and adjustable…
Designed to perfectly complement my custom drifting wheels (for 12 mm hex wheel carrier), these TPU Knobby Tires offer enhanced grip off-road. No gluing required! You can easily switch between these tires, bare drifting wheels or opt for…
I recommend following the Build Guide when assembling. Please contact me in case of questions or any confusion. The model is provided as is. The necessary tools must be available for assembly. If you like it, you can [buy me a coffee] .…
Just print in TPU, infill 30%, supports needed. Original file is for tools with a diameter from about 25 to 40mm
charnière de remplacement pour porte de tableau électrique LEGRAND EQUINOXE
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
Remix of https://www.thingiverse.com/thing:2938514 I extended the bottom edge to 7.5mm for a little more protection from mud and water, and made the grips on it extend out a little further from the original. This has a great feel in the…
This is a remix from the offroad trailer from henke_99 on Thingyverse and a horse trailer from LULU3DBUILDER on cults. I put all together in tinkercad. I contacted the license owner on cults, and he agreed to change the license. I added…
Remixed from https://www.thingiverse.com/thing:3753924 The reason for the screenshot from thingiverse is because i am moving all my designs from there.
UPDATE jan, 1st 2024: I made a much better Shock Stand: You might want to try this one in stead: https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand *********************************** I went from 1/10th to…
Here comes a little Hi-Jack Lift in a small scale 1:18. I printed it in PLA, but other filaments should also work. For assembly you need a few M2x8 screws Have fun!
I joined the the following tire and wheel to make 1 stl for 3d printing as one piece, perfect for Gaslands or other miniatures games. Jeep Wheel https://www.thingiverse.com/thing:2056923 Tire https://www.thingiverse.com/thing:2119923…
UPDATE jan, 1st 2024: I made a much better Shock Stand: You might want to try this one in stead: https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand *********************************** I went from 1/10th to…
Diffrent fixing mechanism for 3 storry 1:64 HotWheels lift. I chopped off the little cips that were finicky to print and never worked well for me. Insted the part now just fits into the poles with friction. It fiits quite well. I don;t…
I looked all over for a Lego Torsen diffrential but all i could find was one on Shapeways. I don't want a part, I want a file i can make multiple parts from. not to mention it used helical gears not spur gears and worm gears, making it…
Un petit coffre fonctionnel et décoratif pour ranger de petits objets. Un modèle de coffre 90x50x40 simple et un modèle 90x50x40 texturé Les modèles peuvent être ajustés aux dimensions et textures voulues avec le fichier openscad.
RiffRaff, is a villain on Underdog, an American Saturday morning animated television series that ran from 1964 to 1967. Riffraff is an anthropomorphic wolf gangster. He leads an unnamed gang that often carry out various crime waves until…
OVERVIEW This is a fully 3D-printable 1:45 car built as a display model or functional toy. It’s a beginner-friendly project . No cutting, no printing supports, no screws and hardware needed. You print the parts (~6h), assemble them in 10…
A roof rack for Farmersmark's 1:10 off-road trailer. Thank You to the original designer, I Love this trailer.
Model of a Tabbert T@B 320 Offroad 2019 Camper. A caravan known as “teardrop”. We are fans from this one. I found no public model of this. So I decided to create my own. Best printed with SLA printers
I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. Minimum print area: 250x120mm UPDATES: 2025/03/20 - added NBC.4…
Clé pour coffret de compteur EDF. Permet d'ouvrir et fermer le boitier contenant le compteur EDF extérieur. A imprimer de préférence en ABS pour la solidité.
Mir hat das Model so sehr gut gefallen. Ich wollte aber noch ein paar Änderungen vornehmen die ich diese selbst schon in der jeweiligen Ausführung gefahren habe. Die Reifen müssen wieder in TPU gedruckt werden. Der Rest in PLA und wie in…
Only for those without M2 screws no other reason to print this instead of original. THE FIRST FILE HERE: https://www.prusaprinters.org/cs/prints/13780-mobius-kaleidocycle-box-kinetic-ring-box…
Decorate your crawler-track with this small finish line banner Consist of 5 part: banner.stl foot_small.stl (you need 2) pillar.stl (you need 2) No supports / rafts needed Maybe you have to glue the parts together
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
Introduction The Single-Slit diffraction experiment is amazing ! “The Action Lab” has conducted the experiment using an crescent wrench with 2 razor blades and a laser pointer: This 3D model provides a magnetic holder for two razor blades…
LEGO ARMY OFFROAD PICKUP
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
Car stand for 1/10th scale offroad rc cars. This car stand has a Team Associated branding. You also need six M3x10 screws and 6 nuts to screw the two halfs together. The Team Associated letters must be printed out separately and in an…
Resolution: 0.16mm infill (%): 20 Support: Yes Infill for tires should be 0, make the wall count higher. M4x24 screws - For the wheels.
I printed mine in polycarbonate with 5mm wall thickness and 35% infill. I have not tested any other material.
All stl files for the Dutch Drone Gods 2.5 inch frame
Following the publication of a multi-colored box that was almost impossible to reopen, I had the idea of turning it into a piggy bank. My contribution is just to have modified the model to add a slot on one side. So there are 6 different…
Vis de fixation d'un coffret électrique
I added the tow hitch to mount a remix of a offroad trailer from thingyverse by madizmo https://www.thingiverse.com/thing:2847515 that I added a horse box to, that I bought from cults. (More details about that on the trailer model.)
This is a model of the old French Suffren class anti air destroyer. It is an original model. The model is not optimized.
RC SCALE EXPEDITION OFFROAD CAMPER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. 010_axle can be reinforced by…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I have a few places of mud and/or incline on my lawn that the original mower wheels have struggled with. I wanted to print a replacement tire that uses the original wheels to reduce filament usage and have it look somewhat stock/original.…
offroad snorkel with gopro mount
Petit coffre de pirate avec charnière fonctionnel en deux parties. Impression de préférence en PLA Bois pour plus de réalisme attention au charnières qui reste fragile avec ce type de filament, augmenter la taille pour plus de résistance.…
A RC-car rim for WPL cars. It has slightly bigger hex size (6mm) so it fits better on the axle, depending on your printer settings it should still be a nice fit. Fits on original WPL tyres. This rim is slightly wider than original! Use…
There is 6 diffrent models: (10 mm long scrape head) (15 mm long scrape head) (20 mm long scrape head) (25 mm long scrape head) (2 mm thin scrape head) (1 mm thin scrape head) Enjoy :)
just a model of a car. resembles a jeep
Warning, this ONLY works with the ZWO Seestar S50 dew/light shield - baffled. Make sure to print that part separately first before printing this one. Simple yet efficient spike diffraction mask made specifically to fit in dew shield.…
Hi It's my nozzle for Kica JetFan. Quick mount diffrent nozzle. You need 2pcs screw M3x10mm
Car stand for 1/10th scale offroad rc cars. You also need six M3x10 screws and 6 nuts to screw the two halfs together. At the top and bottom there are indentations to stick some foam rubber tape in. I used 10mm wide and 1mm thick foam…
3d scan of a Saffron Milk Cap mushroom (Lactarius deliciosus) 80mm (H) x 100mm (W) I couldn't find an accurate model of a Saffron Milk cap mushroom. So I scanned one myself. Great for decoration or teaching others about safe edible…
Screwed Husqvarna / KTM Oil Funnel for Offroad Models with air release for better oilflow Should fit on all KTM / Husqvarna / GASGAS Offroad & Supermoto models. Feel free to remix to lighten it up or add some features.
This is a cover for your All Dogs Offroad upper control arms to prevent moisture and debris build up. You will need an R29 o-ring for each UCA cover.
CF Moto 450 MT offroad footpegs insert Christmas gift for cfmoto 450mt community! Have fun! I printed it with PETG nozzle 0.8 layerheight 0,4 3 perimeters it is strong and durable you need m6 bolt washer and nylon nut
attache rapide qui permet un démontage rapide des coffres ideale pour un bon netoyage
0.2mm layer height works fine for all the stls but you might want to use a finer one for the plates and a thicker one to make the case print a bit quicker. the holes are for m2 screws. I printed the bottom plates in transparent filament…
Decided to attempt to recreate Matt's Offroad Recovery's "World's Largest Offroad Wrecker" for an SCX24 chassis, and well, this is the result. Should be able to assemble using standard SCX24 screws. Could work on various chassis, but this…
A friend of mine wanted to replace the TRD 4X4 Off Road decal on his truck sides with something with more dimension. This is a model I created in fusion 360. 3 files are included to accommodate print volumes. The STLs will fit on a Prusa…
Cool Subaru body with a cage, its been sized to fit 1/24 and 1/10
It is just a stick with a chain and you can change between 3 diffrent rattles/toys to put on the chain. The only thing is that you will need a small string, rubberband or one of those keychain rings to connect the chain and the…
Modified the bottom section of this bullbar made by Matthijs2101 because the it looked very blocky and not very practical offroad. Also added tow hooks because they look cool. Intially wanted to add a winch too but the dimensions didn't…
Car stand for 1/10th scale offroad rc cars. This car stand has a Yokomo branding. You also need six M3x10 screws and 6 nuts to screw the two halfs together.
Vis de remplacement pour les coffrets électrique Schneider de type Thalassa PLS. Référence Schneider: NSYTCD274 Imprimées en PLA Replacement screws for Schneider Thalassa PLS type electrical boxes. Reference Schneider: NSYTCD274 Printed…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
pour les charnière utilisé un bout de Pla coupe a dimension et chauffer
A special version for reinforced bike wall mount with special hook for SPD pedals. Tested with Shimano M520 pedals. I tested a other 3D design but my bike fall out of the mount and got damaged. Therefore I designed a super strong pedal…
To mount the wheel you just need the screw that goes on to the compatible models and you are good to go, install the wheel into the position. Be aware that the original wpl/jjrc tires don't really fit ot these rims and that the little rim…
This is YAFFR - Yet Another Fish Feeder Ring. Fish love it, because ... fish! Made in OpenSCAD: Look-Learn-Imitate-Create -- Deutsche Beschreibung: -- Fischfutterring. Noch einer. ;-) Print instructions Category: Pets
This is just a simple 1/10 scale off-road utility trailer. It has a trailing arm suspension, and is tested to be trail/off-road ready, and is sized around 1.9 1/10 crawler wheels. Print the frame and suspension components in PETG at least…
A highly detailed 3D model inspired by an iconic 6x6 off-road beast. Perfect as a display piece, decoration, or to showcase your printing skills. 🧱 Recommended print settings: Material: PLA or PETG Layer height: 0.15 – 0.2 mm Infill: 15 –…
Replacement cover for 6" PIAA offroad lights. I'm not sure of the model that I have. The overall diameter is 6.25" (157mm). The lens is 5.8" (145mm). The cover snaps on for a tight fit. I replaced my PIAA 40 Series 44010 covers after one…
Ich habe die Genehmigung von den Real Life Guys bekommen, um dieses Modell hochladen zu dürfen. Aufbau: Vom Originalmodell benötigen Sie das vordere und das hintere Teil der Karosserie (auf den Bildern zu sehen). Skalieren Sie diese auf…
Ready to hit the dirt? This 3D model brings the classic VW Beetle into full monster truck mode – massive tires, exposed supercharger, bold exhaust pipes, and a powerful rear spoiler. A wild blend of retro charm and Mad Max vibes! Perfect…
I bought the set Facom PG.44A and I wanted something to hold the spanners. CAD file is provided (solidworks 2017), so you can remix it if you need to adapt it for your tools.
Iconic Movie Characters - Rear Window - L.B. Jeffries & Lisa Fremont - 1954
Nová ramena kol která nejsou spojena rychle se ničícím kulovým kloubem ale ocelovýma oskama. Také jsou upravena vystouplým uložením tlumičů pro větší výšku auta. Osky jsou 2.5 mm ocelový drát. Na jehož konce je potřeby vyřezat závit pro…
Puzzle de 50 pièces représentant les chiffres de 0 à 9. Les chiffres ont une hauteur de 8 cm et une épaisseur de 1 cm. Chaque chiffre est composé de 4, 5 ou 6 morceaux. Vous trouverez pour chaque chiffre un fichier regroupant tous les…
The unique geometry of the James Webb Space Telescope produces 8 point diffraction spikes around bright stars. This characteristic pattern is a tell-tale mark of JWST images and makes for an attractive holiday ornament! Looks great…
Fresh Prince of Bel-Air - Geoffrey Butler (Joseph Marcell) - 1990-1996 3D printable model.
Offroad style light for kid 12 volts car. Glue standard 5mm leds on the led ring and glue it inside the housing. You can apply aluminum tape on the inside of the housing to make it more reflective. Use 6mm (¼") screws to assemble the…
Adapter um T8 Leuchtstoffröhren in T12 Aufnahmen mit Schraubkappen zu verwenden und gegen Feuchtigkeit abzudichten. Zudem ist noch (bei Bedarf) ein passender O-Ring zur Abdichtung gegen Feuchtigkeitseintrag zwischen der T8-Röhre gegen das…
Offroad Chevy Concept Model- a concept for a truck I'd like to build. The wheels spin :) Used base body from this model: https://www.printables.com/model/692030-2021-chevy-colorado-zr2/files Used this front bumper (with a couple…
I designed this from the ground up. This case fits the Chipolo One. With the Find my Device Network Launching for android I've got a couple on the way for my bike and other stuff. I don't want to glue the thing onto stuff so this'll give…
Hey guys This is a Model from pintables since I dont have an ams and dont want to stop the print for changing filament etc. I had to come up with a solution because I wanted to print that modell but in color so I made all the work and…
Offroad Chevy Concept Model- a concept for a truck I'd like to build. The wheels spin :) Used base body from this model: https://www.printables.com/model/692030-2021-chevy-colorado-zr2/files Used this front bumper (with a couple…
Here is a set of printable windows for the fantastic NBC.3 trailer. https://www.printables.com/model/902228-nbc3-110-scale-offroad-camper-for-crawlers This contains a set of windows that will fit within the designed window frame of the…
Adaptor for smaller shocks - example you need to print from ludog's 1/8th 1/10th offroad RC shock stand : foot 2x side Print settings: Anything you like. I have used 0.8 nozzle with 0.4 layer height - Prusament PETG Supports: No
Cover to use with key for off road vehicles. Intended for TPU filament. Kawasaki version and plain version included. Keyring hole might have to be centered for some keys. Print Settings Printer: Dremel Idea Builder Rafts: No Supports: No…
A small concertina-shaped rosin case, modeled after a pre-WW1 anglo-german concertina by Charles Jeffries. Printed in two colors (black & silver). I also tried using layers and different colors to make the end-plate and buttons a bit…
![[OLD] 1/8th 1/10th offroad RC shock stand](https://media.printables.com/media/prints/45948/images/456918_4cc12716-beb6-45b0-abb9-2851c64e2d02/large_display_img_0624_45948.jpg)
![[OLD] 1/8th 1/10th offroad RC shock stand](https://media.printables.com/media/prints/34737/images/343226_9b9466f3-bb6b-4da5-a50f-75003b8de8e9/img_0625.jpg)
