Fillamentum Spacer - Repwinder
Spacer and end cap for fillamentum spools for the repwinder Print instructions 0.2mm, 15%
Wydruk około 2,16 €–2,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 48
- Polubienia
- 5
- Ocena
- 5
188 modeli
Spacer and end cap for fillamentum spools for the repwinder Print instructions 0.2mm, 15%
Wydruk około 2,16 €–2,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a simpler version of the Hypnotic Extruder Visualizer, that fittet the Ender 3 S1 Sprite Extruder. It's two parts that i printed in PETG with 0.2mm layer height. They are made to pressfit onto the extruder stepper motor axle, and…
Start with BC's excellent spool holder mount, add in a touch of BobbyMcWho's simplified back, incorporate Aikano9's adapter for HugoG's wonderful Filler - Filament Holder, add a chamfer to use less support and there you have it. All…
Hello, here is a file to test the filament and the printer. It is a small audi quattro, fast to print. For a better test I recommend to print with 0.07mm (ULTRADETAIL) .
This is our new airless basketball model designed for the amazing Fillamentum PEBA filament! This airless basketball filament has one of the best bounces we have tested, and also has amazing durability as well. Since the Kimya PEBA-S…
I took Engidahvs' model, along with the PC4 M10 arm from BC, and extended it out 25mm to be more centered with the spool. I then joined them so it can be printed as one, solid model and added an elongated support so it's sturdy. This is…
A recreation of the Fillamentum Sampler . Update 22/9/21: Added a little holder for 20 samples. It should have enough tolerance to give the samples some wiggle room. Update 25/9/21: Added a see-through lid.
silica gel box + fillament holder. this is a build made to hold a 3d printer fillament in a cornflakes box. the fillament is placed over two rollers with implanted bearings. three boxes hold alot of silica gel around the fillament. Print…
I needed a filament guide that had an easy feed/entry I used a "PC4-M10 Male Straight" Pneumatic fitting (you can search for them online at your favorite store) I printed the cap for aesthetics. Fusion 360 file included. Print…
Neither Bambu Lab Studio nor Orca Slicer contain a material profile for Fillamentum NonOilen , a great 100% recyclable material . ( More info about this material here .) ► I have prepared a material profile based on PLA and for use on…
A simple fillament Spool to Drill Adapter with M8 Rod. Needed Material: M8 Rod - about 15cm 2-4x M8 Nut (counter Nuts make it more secure, but 2 should work fine)
This is an original design I made specifically for Fillementum CPE HG100, though it should work in any food safe filament. The lower right corner is meant for a glass carb cap. STEP and F3D files included so folks can edit it themselves.…
An easy Print filament Stand @ 50g filament used to print and mounts a 1KG roll. No Support is needed.
03/2025 update: New bottom spool rollers, the center autorewind replacement. Hardware used(pcs for one box): 2x 608, 2x 688 bearing, 6x M3x10 DIN912 screws. Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure. author of…
english The box is designed to store unused filament spools in a dry place. The silicate container included for this purpose also prevents the filament spools from rolling back and forth thanks to its rounded shape. Print samples (24 x 24…
A quick-printing snap-together spool for eSun's "Refillament." It sucks that, every time you buy filament, you're stuck with this absurd non-recycleable polystyrene spool that you just have to chuck in the garbage to be carted off to a…
Hi there - i was looking for a robust and good spool holder to mount on top of my Ender 3 v2 I recommend my filament guide here https://www.thingiverse.com/thing:4712122 to fit in front of the spool holder. There was some but was really…
Filament holder for PM spool. ( https://www.filament-pm.cz/ ) Fusion360 file included if you want to modify it. Prusa i3 MK3 0.2 20 infill PLA no supports
This is my moder glasses holder. I put focus on a tiny, compact and modern design
Combined a bunch of others drybox designs to create my existing setup. List of Purchased Parts: EZY Drybox 18L/19Qt from HomeDepot Metal Rod 5/16 x 36'' for Filament Spools also from Home Depot. I have a fine thredded rod but a smooth one…
I hold my spools on a shelf and wanted evry spool holder to be printed same as the color it holds. NEW IMPROVED VERSION
A reverse bowden tube adapter for the official Ender 3 V3 SE/KE sensor. Allows for the use of the original bracket. Important The sensor has the filament port slightly offset in both the X and Y direction. See the pictures for correct…
Updated 25-02-22 Split main body, pivot back plate hex corrected to 7.1mm across flats for M4 nut I have designed this spacer and pivot assembly to make it easyer to change the filament on the Eibos Cyclops dryer. As good as the dryer is,…
Print with 3 walls, 0,15mm layers and 15% infill.
My girlfriend wanted a stand to organize her markers with but everything I could find online used too much filament or was modular with no nice way to move them around as a unit. Considering she wanted a number of these I figured I'd just…
Try it out!
Bearings used: https://www.amazon.com/PANTZ-Bearing-Section-61804RS-Bearings/dp/B0CNR (2pcs 32x20x7) Threads M30
Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…
3D model description suporte para rolos simples 3D printing settings layer 0.2 ou mais mínimo 30% infill
Use some rubber at the bottom for minimal sliding, you can also fill the bottom with sand if you use the linear infill and for example use filament change to pause and fill the model
Sollte in temperatur bestandigen Material gedrückt werden
A remix of the great https://www.thingiverse.com/thing:3020026 . It is just roughly 20 mm shorter and fits perfectly for the Fillamentum spools. Image for size comparison, left is the original size (but including a scale).
Bracket for mounting fillament sensor and supporting cablemess on the gantry of the CR and Ender series printers. Enjoy Print instructions Print it upside down with legs in the air. Enable "Support everywhere" so the small clamp will be…
Simple Redesign of the filament dryer temps and time for the Creality Space PI Dryer. Can be printed without AMS or CFS if you pause and swap the filament on the text layer.
I was bored by plane looking filament samples and added some sci-fi elements to them. I also modified the Lid.
great design made to fit
Fits snugly to the side of flashforge finder 2, holds filament even if it is the smaller sized original Dremel Filament Print the base on the side, and the peg standing up. You will need a screw to fasten them together. Ask me if you got…
Simple fillament spool roller - fast print, easy to put together. Bearings, screws and nuts needed. Two wides included. One to fit standart spool wides and one to fit Fiberflex spool. Pieces to print: part A - 4pcs part B - 2pcs (wide or…
For when you have multiple spools installed on your printer. The print simply clips onto the top rail of the printer, and you can feed the filament trough. Printed with 0.28mm layer height, and 35% infill. (less is probably sufficient)…
A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path when using an external fillament holder this is much smaller than the original filament spool holder and can be useful if you need to fit the printer…
I was massively impressed by InterlinkKnight's Digital Spool Holder project, but wanted one that could be mounted on my Ikea Skadis pegboards. The design of the spool holder is very good - if you want a super quality filament holder with…
Wallmount Fillament Spool Angle Holder i rearanged my printing space and had no more vertical space. so i made this in order to mount the fillament spool on the wall have have the printer take the less space possible. Material: M8 or 5/16…
Updated 11/03/2023 [dd/mm/yyyy]: V1 Original version, has dimentions for 6mm and 4mm PTFE tubing, threads have an offset of .5mm for a well calibrated printer. However due to material shrinkage, and layer height selected this might not…
Filament Roller With Bearings Parts like bearings,screws,nuts,washers on 2d layout
Creality Ender 3 V3 SE fillament guide that mounts on top of the printer, instead of the stock spool hanger. Optimized for printing on the side of the guide cutout, probably would make more sense to optimize the model to print on the side…
printed in PLA with 10% infil. I've created this model from scratch although it was heavily inspired by Terminal_6 https://www.printables.com/social/319444-terminal_6
Some wood stumps feel out of the filament tube below the roof of my Prusa lack setup, so I took the original tube reversed it and made it in a way that you can just push it in below the filament guide into the enclosure. No glue required,…
Print at 0.28mm layer, 4 walls, 25% infill (if this model gets over 500 downloads i will make one for 3kg and 5kg)
Anycubic Kobra 2
Fits to the front of your Prusa MINI / MINI+ Helps you keep your desk / enclosure clean You can scrap directly from print sheet Recycle sign at the front - everybody knows that you are thinking about nature even when printing plastics…
This simple modified version of the RPI 3 mount has a hole on the bottom. Less filament to print without compromisring strengt Should allow for slightly better cooling
Easy to print clip that uses custom lengths of filament with a friction lock. Probably also able to pull one strand of filament through all 4 holes for a stronger fit. NOTE: you might have to change scaling based on printer tolerances.…
Spool for filament 200mm. Consists of two parts connected by two short M6 bolts. Reel.
No instructions as this is a mod from another listing. The only thing I would recommend would be to us flat screws so the heads don't stick out and possibly interfere with the chain. If possible. See the other persons 45 degree cut photo.…
Thats pretty much all, Printed on normal PLA, no supports no nothing, A fast and stylish print, No magnet or other parts needed, snaps in place! Should fit all the prusa printers with an exposed extruder shaft of 5mm (MK3S/MK3 Plus and…
Hey guys . I saw some ways of mounting rails to my walls for the spools i had but i thought every signle one was way flimsier than i imagined. So i designed this one , its pretty standart and im using 15mm hollow aluminium rods and it…
this is designed to prevent the filament from tangling up with the printhead, it also reduces friction on the filament. It also reduces the friction on the filament when it is being pulled by the extruder, Imade this because im not using…
2 versions: With spool support and only z axis guide! Spool holder for the Easythreed K7, using the model ( https://www.thingiverse.com/thing:4870760 ) as a base. What I did was create a new adapter for this part; the fit is perfect. It…
I wanted better access for filament cutter when I changing filament on Prusa Mini so I added nut to body. Just insert whole filament cutter with nut side to extrusion and rotate to fix it in place. Other files (top piece) and guide are…
The wall-mounted filament spool holder for 3D printers is an excellent solution for saving space and making workspace organization easier. Its simple and functional design does not require support during printing, ensuring quick and easy…
Simple pulleys to guide filament using 608 bearings. Mounted using adhesive foam tape.
i used tree suport and brim
You need two 608zz ball bearings. Print it slow, with support and at least 60% infill. Glue the ball bearing into the roller with instant adhesive. If you want to make a version with only one roll, take the two spacers.
A Simple but effective Spoolholder for 75mm Rolls. Designed and Tested on Geetech Spools. As bearings just use 22mm standard ones. (608Z) Tip: Push the bearings in, while the part ist still hot from printing.
The CF rod fits snugly within the printed holder and is repurposed from a broken drone leg: 🔗 Holybro S500 V2 Spare Parts I won’t be listing anything from AliExpress, as I do not endorse purchasing from them. The model is designed to fit…
This is a simple part that utilizes emmett's very good ‘Gear Bearing’. The model basically stacks several of those (which have been customized to suit the scale of this model) on top of each other, into a little roller, with rounded sides…
These deeper caps are needed for clear spools from Devil design and Fillamentum.
Big Spool Holder to build you will need 4 12x18x4 bearings and m3x30 screw or longer
I removed some of the height of the original roller body and included two new roller designs - I am not very good with CAD yet so these were the best I could do. I remixed the original model so that I could stick this roller inside my…
Discussions regarding fillament jams lead me to draw and print a really very simple fillament movement senzor. Bondtech gear movement indicator in the fillament jam situation does not show you, whether the fillament moves, the fillament…
Why I made this I really dislike how when I cut the fillament head (Which is often when I need to change fillament) The loose bit just flies all around So I made this contraption that can attach to your wire cutter Obviously it wouldn't…
Print however many segments and one end for each side and connect with 2x connector for each connection. Some supports required.
You can put a long thread and 2 nuts through the center to hold it together or glue it together I guess The screw holes on the base of the bracket line up with the core one nylon rivet holes for the top cover, you can insert some M3x10…
Other material: PTFE Tube ID 3mm x 5mm OD 2x M3x10 eventual PG7 cable connector
Gedruckt mit PLA, 25% Infill, Füllmuster, 4 Wand Linien. Die Auflage für das Fillament bildet ein 16mm Kabelkanal mit einer Länge von 360mm. Alle Teile sind einzel Druckbar. Die Wandhalterung kann auch ohne die Fillamtenhalterung genutzt…
Reduce the strain on your internal Filament tube with this handy spacer. Designed to mount to the original filament sensor holes on your Centauri carbon (you can even use the same M3 bolt). PRINT NOTES: This model must be printed on its…
It works by inserting a one-inch PVC pipe cut to length to create the complete model. You place the PVC on top and then slide on your roll of filament. It uses a one-inch PVC pipe, cut to length.
I used 20mm PVC pipes and 4.2 x 13mm screws
Expect a V2 very soon!
FreeCad FCStd file is included. The holder has 3 parts that fit together without the need for any fasteners or glue. Mounts to the back left foot and horizontal rail above the main harness exit from the main board enclosure. To save…
Simple to print, easy to fit, and helps avoid the bowden tube snagging on the frame.
Material PETG. 100% infill.
So I bought a 2.3 KG fillament spool which didn't fit on the default spoolholder and due to its weight I didn't feel comfortable printing a longer spoolholder. This has led me to designing my own clean modular fillament guide system. At…
Filament Wallmount (can you use a rod of 40mm inside) Great resistance and low filament usage.
Filament rubbing not only increases friction but damages both the filament and the hole the filament is routed through this guide ads a layer of protection.
for pla on the A1 or A1 mini AMS lite that are 73 mm in diameter for inside.
Hello everyone Here is my fillament clip. Best way to print it is to use a 0.2 mm nozzle. Fit nice and tight. Publication of yours print profile is more than welcome. Enjoy!!!
Just added hex holes to the design by @volly. As i own about 10 of these boys around the house, for every 4 i printed i saved enough filament for 1 extra one. https://www.printables.com/model/315746-ikea-koppla-slide-tail-mount original…
Refillament spool for eSun refillament series filament, the spools have labels on them displaying the filament type on the spool. I have left a spool blank for custom logos etc. These are compatible with the Anycubic Ace Pro. I recommend…
This is just a normal fillament storagebox with option for drying filament with package for drying(I don t know how it s called and those packages usually comes with a filaments) and it s for 1kg filaments. WARNING: The window for the lid…
I just wanted to share this very simple technique : cut common empty spools into halves and glue them on the sides of Esun refills, to spare some plastic. The majority of my 1kg spools have a 90mm small diameter that fits perfectly inside…
Fillament welder / joiner holder. Found it anoying as frick to operate using 1 hand. So i made a contraption to hold it in place, so that i can slide it to gether, join the fillament. then slide it out. Together with a hole to place a…
This is a very BETA model. I drilled a hole for the power for the filament drier (because I forgot to model it!). I used threaded inserts for the panel side. You need longer screws. Holes are in place to glue magnets but I've not done…