Wyniki wyszukiwania: fini

Yet Another Fidget Infinity Cube v2

Buy a printed fidget cube from me directly: AustinMakes.etsy.com An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed. Note: vertical hinges will be stiffest after printing, but…

Infinite Cube - No Supports, No Glue

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube, now optimized for faster printing and minimal material usage! This version is divided into three parts, eliminating the…

Gridfinity Baseplate (Quick print, lite version, less filament)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Gridfinity Box (Quick print, lite version, less filament!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Silicone / Caulk Cartridge Finishing Nozzle Tips

No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…

Dremel box organiser - Gridfinity based

I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…

Gridfinity Caliper Holder - Low Profile Space Saving

This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…

Gridfinity Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots

This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…

Gridfinity cable Organizer

For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…

Gridfinity Bins - 2x2 Format

Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…

Ultimate Kobayashi Infinity Cube

This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…

Infinite Cube

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube , a mesmerizing blend of geometry and minimalism! With its 111 mm dimensions on all sides, this artistic sculpture adds a…

The Infinity Pen Holder: A Minimalist Organizer

The Infinity Pen Holder is more than a simple desk organizer. With its clean, minimalist design inspired by the infinity symbol, this unique piece is the perfect blend of form and function. This model helps keep pencils, pens, and other…

Gridfinity dremel bit storage

Gridfinity dremel bit storage. Remixed to reduce the print time by making a lid instead of holes going through the part

Gridfinity Modular Drawer Remix

A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…

Gridfinity Deburring Tool

Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…

Gridfinity Caliper Stand

This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…

Xiaomi Wowstick 1F+ #Gridfinity holder

Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…

Infinity Cube (fidget cube) with interchangeable hinges

First of all: If you like this model, please klick on like to help me earn some Prusameter. Thanks. The special thing about this Fidget-Cube in comparison to similar constructions is: the cubes can be printed individually, in different…

Screws labels for Gridfinity Bin

Screws labels with pictures of DIN912 screws

Gridfinity X Cantilever Sbox - Storage Bin Case Organizer

This is a mashup of two very cool systems. Additional Materials: 6 pcs - M3 x 6 mm bolts (or M3 x 4mm) 6 pcs - M3 x 8 mm bolts 14 pcs - 3 mm x 35 mm rod 2 pcs - 3 mm x 32 mm rod (for the bottom of the front latches 2 pcs - 3 mm x 25 mm rod

Gridfinity base for Systainer 3

Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.

Thanos - Avengers Infinity War

Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster

Gridfinity zip tie storage

gridfinity zip tie storage (came back to look at this holder and saw just how many mistakes i had made, iv learned how to do a better job of it so hear the updated version) Added a taller version for the longer zip ties enjoy

Gridfinity Pen/Sharpie Stackable Tray 4x2x4

Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design

FESTBOX a cool box to be hanged to your Festool Systainer with Gridfinity Compatible Model

I was looking for small boxes to put accessories when using my Festool machines to don't have to always open the Systainer to take them Starting from a previous idea to hang my Mirka sander to its Systainer →…

FlexBox2 - Gridfinity Bin with Dividers and Labels

Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…

Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]

This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…

Gridfinity Dremel Bit Caddy

This caddy organizes my whole dremel collection with all different attachment requiring different gridfinity slot this caddy fits most of my dremel needs. This is model is by Zwierzak, Does a Thing on Thangs didn't see any good Dremel…

Gridfinity Generic DevBoard Holder

This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…

Gridfinity Bin for Prusa Nextruder Nozzles

There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…

Gridfinity Box Parametric Solid Edge

If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped A parametric Modell of the standard Gridfinity Box in Solid Edge. If you set a Dimension to 1, the Model gets stuck. So if you want a 1x4 Box, Set 4…

Gridfinity USB Cablemanager 1x4

This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Gridfinity Stripper pliers rack fit for drawers

This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…

Gridfinity Dremel Sanding Band Holder

Holder for Dremel 1/2" and 1/4" Dremel sanding bands, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Gridfinity Dymo 160 Tape Holder

Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Infinity Cube fidget

It's fun to play with, especially when you're bored.

Gridfinity Index Card and Pen Holder

Simple Gridfinity box for index cards and/or 3x5 post-it notes, plus two writing implements. Wells for pens fit regular Sharpie markers, many types of mechanical pencil and our beloved Pilot Acroball-2 black and red pen.

Disney Infinity : Captain America

Another edit of a Disney infinity fanart model on SketchFab by JohnLogostini . This is my printable version of it, with a lot of detail in the model itself, instead of maps. Printed at 10cm high on my mk3s+ I added a photo of that print,…

gridfinity 1x2 bin dremel tools, spanner, chuck and std. dremel 3.15mm (1/8") tools

Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…

Gridfinity AAA battery storage

This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.

Gridfinity 2x2 for 21mm Liquid Bottles e.g. Vape Liquids 10ml

A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.

Gridfinity for Swiss Army Knife

Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699

1x1 Gridfinity Dremel Accesories Holder

1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…

Gridfinity 2x4x6 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Gridfinity SanDisk Extreme SSD Holder

Simple holder for 1TB SSDs using the Gridfinity system by Zack Freedman . Fits up to 3 SanDisk Extreme SSDs for all your storage needs. Leave any suggestions below. Thanks!

Dremel bits holders to use with the Gridfinity system

Printed with no support and 25% infill.

100° Modified Hinges for Modern Gridfinity Case

Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…

socket holder 8-22 metric, 3/8" drive ratchet, gridfinity

Socket holder 8-22 metric, 3/8" drive ratchet. The socket holder uses a gridfinity 2x5 bin. Its made for metric sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22. Printed with 10% infill. You can hang it on a peg board…

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Silicone / Caulk Finishing Tool

Use brim for handle. A compact finishing tool designed for smoothing freshly applied silicone, caulk, sealant, or similar materials. The tool consists of a threaded handle and 9 interchangeable heads that screw onto the end of the handle.…

Gridfinity Allen Key holder

Based on the Fusion 360 plugin, this 3x2 module holds a set of small Trojen metric Allen keys ranging from1.5mm to 6mm. The bin has no stackable lip and the size labels are raised so a colour change makes them easier to read.

Gridfinity 5x5 Baseplate Stack, Single Material Compatible

Didn't like any of the print in place Gridfinity baseplates as they didn't seem single material friendly. I modeled in single line supports to get a good blend of adherence and still being able to separate. Modeled a solid tower in each…

Tool Box Parametric Remix and Gridfinity Storage for Micrometer

After printing a box for my inclinometer, I use for my table saw → https://www.printables.com/model/63528-tool-box-parametric/comments/86291 , I decided to 3D print another box to store my micrometer to replace the original wooden box and…

Onefinity Wire End Cap Protector

Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print instructions Category: 3D Printer Accessories Summary Endcap that protects the wires coming from the Y-Axis on the Onefinity CNC machine. Print…

2x1 Gridfinity Rugged Box

You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…

Gridfinity Bin for Gallon Ziploc Bags

Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…

Disney Infinity : Han Solo

I found these cute Disney infinity fanart models on SketchFab. But they aren't printable without some serious editing. So i did and here's the result for Han Solo. Printed at 10cm high on my mk3s+

Gridfinity 2x2x3 4mm hex bit holder

Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…

Yet Another Fidget Infinity Cube: Screw Version

Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…

Gridfinity Nippers Pliers Strippers Rack 2x2

A rack that fits a set of thin Knipex electronics pliers and 3 Knipex comfort grip small pliers. Prints without supports.

Gridfinity Pen Holder (5x 12mm Holes) For Pilot G2

A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.

Gridfinity 4x4x6 HexBin

A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…

CORE ONE Tools Gridfinity Bin

This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.

Gridfinity CD / DVD bins

Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…

Gridfinity Refined Hammer Holding set (misc hammers), modular

These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…

Gridfinity iFixit Kit holder

A Gridfinity tool holder for an iFixit Kit.

Skull And Spine Toff / Finial

Skull And Spine Toff / Finial. Glue/Add to top of pole or staff gcode is pre-spit with dowel connector. (organic supports)

Gridfinity Zyn Holder

I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…

Gridfinity D / R20 / LR20 battery bins

Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…

Gridfinity Chapstick and others holder

I made a simple Chapstick and Vicks inhaler holder, there was some extra space so i added two more holes.

Gridfinity C / R14 / LR14 battery bin and spacer

Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…

Gridfinity bin for AA and/or C batteries

A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…

Gridfinity Bin for Quart Ziploc Bags

Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…

Onefinity Elite Masso Stepper Motor Wire Cover

Digital File to DIY 3D print (Cover ). 5 x STL model files included for different wing size (0mm, 30mm, 50mm, 60mm, 70mm). 1 x 3MF model file (prusa slicer) Installation: I used original masso cover screw. Each screw is long enough. Wire…

Maximera Gridfinity Bins (w/ Fusion file)

These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…

Gridfinity 2x3x6 Hex Bin

A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Gridfinity Bosch GRO 12V-35 rotation tool module

Leave a make if u found it to be useful or write a comment for feedback, thank you! Did mine in PLA, 0.6 nozzle, 5% gyroid infill. Cut in half to fit on smaller bed sizes. Happy printing!

1x3 Gridfinity Caliper Stand

This 1x3 Gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. It is based on this model: https://www.printables.com/model/503777-caliper-stand @spikeon requested this 1x3 version so the head end…

gridfinity 1x2 cardan joint and reduction step bin sae

Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…

Gridfinity 2x2 Paintbrush Holder - Diagonal

9 holes with spaces between which can be used for thick handled items and paintbrushes. I needed a paintbrush holder and the original version of this was too tall for me. So I tweaked it.

Gridfinity for Maglite Mini

Gridfinity for maglite mini - part of my 'Gridfinity Survival Kit' Collection

27A Battery #Gridfinity organizer

Design description This is a gridfinity holder for 9 27A batteries. Block area is 1x1, and has a height of ⅔, not stackable when filled. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…

Gridfinity Moleskine Notebook Holder

Simple gridfinity holder for two notebooks. Requires 5x1 squares on the gridfinity base. Perfectly fits a large (5 x 8.25") Moleskine notebook. A Maker's Notebook will hang off the edge, as shown. Use only as directed--gridfinity storage…

Gridfinity 1x2 D Battery Holder, no lip, no magnets

A remix of the battery storage tray by BenBreaksThings to hold two D batteries in ZackFreedman 's Gridfinity organization system. Since these can't be stacked with batteries in them, I remixed the original to remove the lip from the top…

Gridfinity Baseplate Tape Cutting Stencil

This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.

Gridfinity Alex drawer tray grid (economic variant)

Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…

Gridfinity 1x2x4.5 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Gridfinity - 5x2 - Holder for Bosch Gluey + spare glue sticks

Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…

Gridfinity Ryobi Multi-Bit Case Holder

This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.

Gridfinity Craftsman 1/4" and 3/8" Ratchet Holder

Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Infinite Loop Agility Ball Game

Hello Makers, i saw the video of the game at the beginning on Instagram and was immediately impressed. No further words are needed. Unfortunately I couldn't find a finished model to reprint, so I simply designed it from scratch myself.…

Gridfinity Storage Case for tools and spareparts from Prusa Mini+ (Kit) Version 2 +CAD/STEP/STP

This is a Gridfinity Storage Case for the Prusa Mini+ (Kit) 3d-printer you can store up to: 1x Needle-nose pliers Nozzle cleaning stuff 1x Universal wrench 4x Allen keys 1x Torx key 5x Glues for printbed 8x Nozzles Prusa mini + Sparparts,…

Keychain with logo. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota.

Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…

Gridfinity Filament Sample Bins & Sample Card

Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…

gridfinity bin socket torx holder

Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…

Glue Stick Gridfinity Stand

I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…