354 modeli
If you're like me and have been accumulating loose extra tools in this kit that fall out when it's opened, then this magnetic extension tray can be stuffed with that excess and more. The top of this tray is made with a small lip that…
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
The reach of iFixit bit driver was not sufficient for my use. I created this extender to enable myself to reach to screws. I printed this with the 3 perimeters and 30% cubic infill. I printed it standing with the bit end down. I printed…
I dropped my kit, and the revolving bit carrier part broke it's pivot on the top side. Modeled it and print turned out excellent.
Background I am cleaning up my pegboard tool wall and wanted a better way to hold my iFixit Mako Precision Bit Set. The holder is intended to hold both the bit set and the lid at the same time. Model description This holder is designed…
The original box for the iFixit Mako Driver Kit is held closed by magnets. However, if you often carry the toolkit around, this extension might be useful to you, making the box closable with a latch. All parts are printable without…
This is a storage tray for the iFixit Mako Driver Kit with its original case. It a 5x3 tray for the Gridfinity system by Zac Freedman . This does take up more room than Zac's model for the kit but this allows for easy transport and…
About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…
Introducing “Fixit” (still not sure on the name ;) ) Fixit is a modular system I developed to help with gluing a large number of laser cut objects. It uses a special grid that allows m4 hex head bolts to be slotted in upside down,…
After the release of the the “ iFixit Mako Driver Kit box frame ” I asked myself, why the heck did I never make a version based on my parametric “ Rugged Box ” to fit the foam insert of the kit. So, I did it now. I included the lid in two…
Video: Standoffs: Currently needs 320mm bed space. STEP file included if anyone wants to modify for smaller printers, its not something I will have time for any time soon sorry. A large turntable that uses my "Fixit" fixturing system.…
This is a remix of Tactical Grizzly's Ifixit Stand with an extra Slot for the Back cover so to has a dedicated place. I thought the model was perfekt and only wanted a place to store the lid of the IFixit Mako. The extra wall I added…
This enables you to store your iFixit Essentials kit on your IKEA Skadis pegboard. V2.0: This is a new version, updated to use the supportless and easier to print Skadis Ultimount, just like DavidsGotWoods Mako Kit. Since it was requested…
Combined this model https://www.printables.com/model/498256-ifixit-pro-tech-toolkit with the wastebin mounting system
I loved the excellent model by @JohnD920 for mounting the iFixit Mako Driver Kit to the Honeycomb Storage wall—but I wanted to be able to (optionally) leave the lid off the kit, and be able to just choose driver bits directly from the…
I was searching for a Gridfinity holder for my iFixit Mako set, but wanted to keep the original case as I like this very much. This design is also very much inspired by iFixit Mako Screwdriver Set Gridfinity Holder by Tactical Grizzly ,…
iFixit Mako Driver Rugged Box Frame I wanted something with better hinges / latches than the iFixit Mako Driver Kit box frame so remixing it with Rugged Box (Parametric) seemed like an obvious solution. This uses the dimensions from the…
I use my Manta kit every day, and I wanted to make sure it was always within reach when I needed it. This simple design lets you slide your Manta kit just under your desk, keeping your work surface clean when you don't need it, but always…
Block is two block deep and 3 blocks wide. Printed with 10% infill and 0.4mm layer height with 0.6mm nozzle. Built on my easy to use template base: https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3…
I was having a hard time reading the existing labels and finding the empty holes to put back the bit I just used, so I made this model that can be printed in white or other bright colour making it easier to find the empty holes. The plan…
Here's a honeycomb storage wall Ifixit Mako 64 piece mount that allows you to put the cover on the back giving you full access to your tools without removal. Requires 2 of the hollow inserts for mounting and supports enabled. I put the…
This is a desktop bit holder for iFixit 4 mm bits and bit holder.
Makes the Ifixit screwdriver set much more accessible than when stored upright with the lid on, and take up less space than when stored flat & open. There's a large open space in the back for more storage, or to add weight. This is a…
Made this for easy accsess to the tools in the kit. And thinks it looks good on display as well ;)
Remix to mount to an IKEA Skadis Pegboard Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Notes: Supports needed for pegs Category: Tool Holders & Boxes
I like my ES15, but I found the bit set it came with was sorely lacking. So I decided to combine it with my iFixit Mako bit set. This case adds holders for all of the bits, it also has a small driver handle that can have the ¼" adapter…
Frame for iFixit Manta Driver Kit. IIt fits very tightly, if it has to be taken out of the housing frequently, it has to be scaled up a little bit. The two frame parts are connected by a sprip of filament. The latch and the bottom part…
If you're like me, you don't like the case that the ifixit Manta screwdriver kit comes in. It's a really good screwdriver set, but the lid falls off as it's only held on with magnets. This case has latches so it won't come undone in your…
I wanted to place my Ifixit Mako driver kit to my honeycomb storage wall so I designed this holder.
The holder has three attachment points and is therefore bombproof on the honeycomb wall. Small clips were added to the side where you can store tweezers, spudgers or other small tools. The lid can still be stored at the back. Just print…
There's only one STL. Print two copies normally and two addition copies mirrored in your slicer. Takes up a 3x5 slot area. Corners can be stacked when not in use and they are tall enough to help support adjacent modules. Uses dramatically…
Some time ago I broke my iFixit tweezers tip and since i didn't wanted to buy them i made my own based on originals. Very easy print. I printed with 100% infill, 0.12 layer height, with PETG filament.
Reverse Tweezer Tip replacement. Won't be as strong as the original, and you will need to thread the plastic with the screw. Worked well with PLA - it does have a bit of flex, but if it breaks it's five minutes to print another. Printed…
Gridfinity-compatible storage tray for iFixit 54 Bit Driver set. Heavily inspired by the storage box/tray that comes with the set, but the 1/4" adapter was moved to make everything fit in 2x4 Gridfinity squares. No magnet holes. I've…
This little adapter fits snugly against the three flats of the iFixit precision screwdriver handles (Polymer and Aluminum Bit Drivers and Marlin Fixed-Blade). By providing extra wings, higher torque can be achieved for really stubborn…
Could not find a suitable holder for my IFIXIT dental tools, so i made one myself. Easy to print and with minimal support waste. Still the tiered design allows for easy access of any tool without knocking of the other ones. My recommended…
The original tray for the Bit Driver Kit was made out of a flimsy plastic that gets brittle over time so i have designed a printable version to replace it. Update 05/08/2023 After speaking to @tswartz07_941440 it turns out there are 2…
A remix of JohnD920's iFixit Mako mount for RostaP's Honeycomb Storage Wall to reduce the amount of plastic used.
Gridfinity bin for holding up to 54 bits and an assortment of other small repair tools. Originally based on @georgag 's bin and modified to fit with the Gridfinity system and hold more tools.
Fits perfect on my ifixit tweezer set.
This tray snugly fits the iFixit Pro Tech Toolkit (Item # IF145-307-4) in a 5x3 gridfinity sized grid.
A re-implementation of daveh_dev's magnetic mount for the iFixit Mako driver kit using Multiconnect for Multiboard and direct-to-wall compatibility. Like the original, this mount lets you to quickly grab the whole kit or just remove the…
A Gridfinity tool holder for an iFixit Kit.
A small holder for the accessories from the ifixit pro tech toolkit. I used this holder for the pliers: https://www.printables.com/de/model/540978-hsw-tweezer-holder I used this holder for the Mako Screwdrivers and cutted the holders on…
Because I'm a T-nuts system fan I had to remix this one. Two mounting holes should be more than enough to keep this one steady on the Skadis. Took this model because it's not a massive print and it looks really nicely finished with the…
Essentially a “shoe" that adapts your existing Mako Driver 64-bit kit to Gridfinity. It made more sense to me to keep using the existing layout than design a new thing from scratch. You can leave the lid on, but I prefer to stick that to…
A mount for the iFixit Pro Tech Toolkit, with or without the Mako driver kit, using Multiconnect for Multiboard and direct-to-wall compatibility. Variants Full Toolkit: Fits the full toolkit with everything inside of the tool roll.…
This adapter takes the small 4mm bits from IFixit and adapts them to the ¼" bit size of the LTT screwdriver. It is fairly low torque as the version I have printed will spin inside the ¼" tip of the LTT screwdriver It will print nearly…
NOTE: : Your lid might not fit right unless you modify it. It's not a problem for me because I keep mine in a drawer with the lid off. Also, this print has tight tolerances. Make sure your printer is calibrated. Be advised, I have an…
While technically a remix I've re-made the holder from Zach's original template using MachoThick's ES15 model and bit holder design. I've added the iFixit screwdriver sketch from Zach's own models. This will fit standard 4mm bits like the…
i have printed these on my ender 3 with some nice PETG in 0.15 layer height
This allows you to use your iFixit bits in your LTT screwdriver. The magnet does go through the plastic base so the bit doesn't fall out.
Sometimes companies make screws hard to reach. This part extends the Ifixit screwdriver at about the same diameter as the tip. Make sure you print it at the long flat face down, there is a key in the model that should help you find it.…
Overview: This is a 4x4 Gridfinity holder for an iFixit Essential Electronics Toolkit (item # IF145-348-5). I noticed most iFixit Gridfinity holders did not include a way to keep the original case stored, so I designed one. This is a very…
Die Schalen wurden passend für die Ikea Alex Schubladen erstellt und das sie kompatibel mit dem sliding-tray sind https://www.printables.com/de/model/886260-sliding-tray-for-ikea-alex-drawer
I just added the Skadis Hooks made by Printables user Rod. Will add to that part, too. added three of Rods Delta model, just to be safe, as the Manta is a bit heavier. Just to be on the safe side.
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
I like to save cases and boxes and it's an issue. With this iFixit Moray screwdriver set you can not only save the case that it comes in but also have a Gridfinity adaptation. All you need to do is print the holder and insert the foam…
iFixit Driver Kit Pegboard Holder A pegboard holder for iFixit's driver kits "64 Bit" (Nowadays also called "Mako") and "Mahi". Maybe other kits are also compatible, but I only tested those two.. Printing and assembly I printed the model…
Created for discontinued tool it (https://www.ifixit.com/News/14199/new-54-bit-tool-kit-from-ifixit).
I have both the iFixit Manta & LTT Store driver, I wanted to keep them together in a way that stacked well with my tools. I made this box to let me keep the original Manta case intact. You will need 6 M3x30 screws. As always, I've…
Compatibility This bin is compatible with the iFixit Precision Tweezers Set and probably a lot of other tweezers. General It is 1 x 4 x 3 Gridfinity units in size which corresponds to a size of 42 x 168 x 21 mm + rim heigth. The height…
iFixit Screwdriver Mount works for Mako and Mahi. Modified @DavidsGotWood's mount to work with @tchoupshop_82950's low profile T-clips. Download the low profile T-Clips here: Link
Simple standoffs to orient things using the FIXIT system. Uses 2.7mm bamboo skewers (has a 3mm hole) to adjust height between the base clamp and a cup. The cup holds plasticine or bluetac to secure most things pretty neatly. Designed for…
This is a replacement lid for the iFixit Mako driver kit. It's my favorite kit and I lost mine awhile ago. Includes screw organizers at the bottom and a magnetic close like the original had. It was designed to use 5x2mm neodymium disc…
Simple HSW mount for the iFixit Pro rollup toolkit storage. Update (11/13/2023): Added a new model that includes a third peg towards the top of the model for stability on the wall. This one will probably require support.
Printed standing with support for the insert to the HSW
I am reorganizing my tools drawers with Gridfinity . Needed something to keep iFixit Manta kit from sliding around, so I designed one. Set case does not sit very tight in the insert as I am taking it with me every now an then. Also added…
Holder for the iFixit Manta set. Designed in Fusion 360 using this template, Gridfinity block template , but the design ideas are copied from the design by Michel Bauer . A secondary slot for storing the cover for the original casing.…
Added the original latch & my custom pads - renamed files for better distinction to original Added a version with holes (3mm) in hinges UPDATED the hinge again so hopefully it snaps better together had to split it in 2 parts cause my…
I love the design of daveh_dev for the Mako Driver Kit holder on skadis, but wiht the magnets I bought, it wasn't holding good enough in my opinion. I changed the position of the magnet rows to align the bits of the kit, and added more.…
This is a simple stand for the IFIXIT tool box. No supports needed. Easy to print! Das ist ein einfacher Ständer für das IFIXIT Werkzeugset. Es werden keine supports benötigt und es ist sehr einfach zu drucken.
Has space for the most important IFixIt tools (or replicas) for opening devices
A quickly modelled storage bin the iFixit precision electric screwdriver
Original by @Onelostcause - Includes both versions, with and without the original lid in the bottom.
Fix your wonderful iFixit Pro toolset to a Skadis pegboard using t-nuts from https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb . I printed this model in PLA with a .4 nozzle and .2 layerheight. I…
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
This is a space efficient box for the iFixit iOpener repair kit. Keeps your repairtools neatly orgainzed. I added the iFixit logo to the lid using an svg in the orca-slicer (also included in the 3mf file). The lid just clicks into place.…
Melted original and decided to print them myself. CF nylon, 0.3mm nozzle, 0.1mm layer hight and fits perfectly.
Recently I bought a Miniware ES15 electric screwdriver and decided it'd be really convenient to carry it around with my iFixit manta set because they use the same size bits. I really like the case the iFixit Mako comes with so I modeled…
This is an low profile bit wrench I made to screw in a part that was bugging me print time is 14 mins approx I used Prusa slicer and 100% infill. The bit holder part is finicky to have it actually hold the bit snugly you may want to mess…
*****UPDATE 2***** Thanks to @modernespiel for Making a split version of the bottom case that has Gridfinity support. It also has spots for recessed 3x3mm Neodymium magnet in the four corners. Expect my next update to add the magnet holes…
A stand for the iFixit Pro Tech screwdriver box that does not take up to much space on the desk. Have a small tray in front so that you dont loose your small screws. the one on the image is printed on a Bambu Lab P1P.
This is a mount for the iFixit Manta driver kit to go on the Honeycomb Storage Wall.
I didn't liked most of the models for the manta kit, as they first take a lot of filament and second mostly don't fit my Prusa Mini. Also there was not really a model for the Essential Kit. As all iFixit hard shells (Essential, Manta and…
This is my mount for the I fix it, Murray, precision bedside. The Malte is designed to fit on to the ikea ska dis system. You will need support structures to print it, but I highly recommend using organic support. if you print it please…
A shallow tray to store your iFixit precision bit driver in prime position for instant grabification. Pictured is an older revision of the ⅓ height version. For Gridfinity by Zack Freedman .
Honeycomb Storage Wall Mako driver set holder with tweezer storage. Logo has been removed from original.
Ein Gridfinity-basierter Halter für den Mako-Schraubendreher-Satz / Pro Tech Toolkit
A remix of MarMed's iFixit 64 bit driver kit holder but without the logo, as I prefer the clean look. Printer settings 0.6 nozzle (Bondtech CHT), 0.3 Quality profile. Supports enabled (everywhere) Printed with Clas Ohlson PETG but PLA…
Box for the Ifixit Pro Tech Toolkit, low edged and non-stackable.
iFixit Essential holder for honeycomb storage wall
NOTE, be careful when using a power drill to screw it in, I slightly cracked mine along a layer line because I overtightened it. not a problem other than it doesn't look perfect. screw it in and leave a little extra and manually use a…
This is my remake of Lukas_B's case for the iFixIt Manta kit. I made the model from scratch, and attatched the Fusion 360 file for others to use. Since I diddn't see the point of the little X-piece inserts from iFixIt's original box for…
6x5 gridfinity bin to hold the ifixit manta set (including the lid/top). This design allows for easy access to all the bits provided but also recessed enough to allow stacking. The weight of the bits holds it down so grabbing a single…
I broke the tip off my tweezer, so I decided to model my own. Since I had the screw spacing figured out, I decided to try customizing it as well. There's a round set and a wide set to grab an M.2 SSD circuit board.
This is a test design for an Ifixit manta tool kit holder. Currently the walls are a bit thin and the toolkit sit slightly loose. im working on a new model with thicker walls which should give the tool kit a tighter fit. MK2 was stronger…
Desktop stand for the iFixit Manta tool kit. As built it has roughly a 10 degree incline, might be too steep for some but you can adjust by cutting the base at a different angle. Has a storage area on the back side for any loose bits,…
Hello! I used the following designs to create a iFixIt Moray holder for the SKADIS pegboard: iFixIt Bitset Holder by Fufus IKEA Skadis Collection (easy print/tight fit) by CSD_Salzburg IKEA Skådis caliper holder by KTP HSW iFixit Moray…
I have an iFixit tool set that I got on Amazon a few years back. I wanted a pretty place to display/store the tools and it had to be Gridfinity-compatible so I made this. I printed it with my MK4 using some generic PLA, 10% infill, gyroid…
