Liczymy pasujące modele…
This model is designed to comfortably transport your favorite onewheeled toy in the car without it banging in all directions inside your car. The part has an original design and was designed directly on the CAD model provided by Tony from…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20766 Thanks for your…
I did not design this. All credit goes to Tony @ Floatwheel. I do not have the source file. https://floatwheel.com/
This part have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. The design features a specific seat for the front bumper and therefore ensures the correct positioning and stability of the…
These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. The intent of this design is to solve 2 problems of the original design Tire rubbing (appare Compatibility of the Drop Top…
First of all, props to Higgs on Discord for doing it first (to my knowledge). You can buy that here - https://floatparts.com/ But printing it didn't quite work for me, so I made a simplified version. Check theirs if this isn't what you're…
This design helps keep dust from getting inside the Floatwheel's charger socket. It's designed to fit and seal the charging port up to the mouth of the socket Have fun! RECOMMENDED MATERIAL: TPU 90A Print Parameters: NOZZLE 0,4 LAYER 0,2…
This design helps keep dust from getting inside the Floatwheel's Power Button socket. The design is perfectly integrated inside the rails and leaves just under 1 mm gap between cover and button, it should also be compatible with the…
These parts are designed directly on the CAD model provided by Tony from Floatwheel. These are 3D printable versions of the footpads for anyone who wants to replicate them either in the original version or in the wide version . Obviously,…
Top drop fender that allows for the lower ride height position of the standard adv without any other 3D printed parts. I designed the new fender around the 3D Model provided by tony. The latching mechanism is just like the original,…
Attention! If you have a 12" tire, this is not the model you are looking for! For 12" tires like the Thundercat check out my new design: https://www.printables.com/model/1345564-floatwheel-adv-btg-mudguard-and-mini-fender-for-1 Original…
For this bumper I have removed the waffle design (intended for moulding) and replaced it with solid infill. This makes printing easier but also then allows you to select the infill you require which can be handled by the 3D printer. Needs…
These Rimmy OW rim guards were designed over the course of several months in the beginning of 2022 to address a problem Float NLC riders were having: Busting hubs from 3+ foot drops on Onewheel boards. This product was tested internally…
I tried some other stand on here and those were too flimsy for my taste. Tough, thick, chunky boy. Tuck away charger and cable slack. Designed to print on a Bambu 256x256mm bed. Holds the board @ 73.5º. Fits all OneWheels and FloatWheels.…
Simple Floatwheel Adv/Adv pro charging plug to avoid debris in the port. Designed/tested for TPU 98A, 0.4 nozzle, 0.2 layer height. No supports required. Should likely work with PETG, but untested. You might be interested in deeper…
This is a redesign of the 6'' inch Rimsaver made on the Floatwheel Original CAD provided by Tony. Some guys have already printed this type of design successfully. I don't guarantee that it will be successful on the first try due to the…
Thundercat BTG tire is HUGE! These mudguards and mini fenders were designed to fit the big kitty. These models may undergo further renditions, so check back and reach out on Discord or Reddit with any feedback. Note: Mudguard file updated…
Same idea as TFL's Gripples but smaller. Here's the real thing - https://thefloatlife.com/products/gripples Meant to be printed in TPU . Previously I used a long strip, but as some people noted, in theory localized pieces might be less…
An alternative version of the Floatwheel Adv/Adv pro charging plug to avoid debris and finer dust in the port. This version goes all the way in, touching the control box and entering the charging socket for a better seal. Designed/tested…
The part has an original design and was designed directly on the ADV Standard CAD model provided by Tony from Floatwheel. It's similar to the original Design by Tony, but optimized for 3d printing, the external surface is completely flat.…
Print in TPU . Adjust Horizontal Expansion if needed. Originally made for the standard rails, now the files include an experimental PRO version. My hub bolts are recessed a bit when tight, that's why there's that step.
Description These parts part have an original design and were designed directly on the ADV PRO CAD model provided by Tony from Floatwheel. It's a completely different design from the original Design by Tony fro the ADV Pro (wich are…
Flip two of the mids.stl files on their X axis for the other side. Add an o-ring to the power plug cover for grip. I print in PETG with a textured print bed. TPU for the plug of course.
INTRODUCTION These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel . This top fender was created for all those who want to print the fender at home but don't have a large print…
Print in TPU, adjust Horizontal Expansion in necessary. Only covers the rail hole, doesn't slot into the port. Maybe in the next version…
This is made for the Original Floatwheel board. Specific cup for the 2-pole GX 16 which allows to isolate the connector from water and dust and prevent accidental short circuits 3D print it in TPU, no supports needed, standard profile…
I couldn't get other bearing cover models to stay in place for long despite a few scaling attempts, so I decided to try a different design. The outer diameter is slightly oversized to be tight against the wheel hub. The overhang shape…
I went over the model from top to bottom and removed geometry that wasn't need and modified it to make it stronger and easier to print. It also has a slightly more “roomy” handle and reinforced screw holes. UPDATE(8-16-2025): Added a 2.1…
These parts have an original design and were designed directly on the ADV Standard CAD model provided by Tony from Floatwheel. It's similar to the original Design by Tony, but optimized for 3d printing, the external surface is completely…
Edited version of stock one to be flat.
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20772 Thanks for your…
These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. Models included: HYPERFORMA_Floatwheel ADV-ADVPro Drop Top Fender Base (MiniFender) +12mm_STANDALONE HYPERFORMA_Floatwheel…
BTG minifenders for the ADV and ADV Pro Beefed up comapred to my previous version. moves the droptop 14mm higher up so you can either use these lowered or with a BTG.
I didnt make this, this is isolated from Tonys construction file. I wanted a softer feel on the rear pad (like the Kush from Floatlife for the Onewheel GT). Obviously dont use this for a front pad setup as it will certainly give sensor…
Mudguard for ADV and ADV Pro
Custom rails made for the Floatwheel ADV inspired by TFLs WTF Extended Steep and Deep rails. My design increases the W angle from the factory 2.5 degrees to 5 degrees on each side (Steep and Deep). I also extended the rails by 20mm,…
***THIS MODEL HAS BEEN REPLACED WITH AN UPDATED VERSION*** https://www.printables.com/model/1053384-floatwheel-adv-printable-bumper-20 My stock bumper keeps cracking at the point where the small "ears" protrude so I wanted to try to make…
I didn't see a rail guard option for the Pro model so I decided to try to make one. This is my first 3D model so it is certainly not perfect but I think its functional for some protection and to change the appearance to look more the like…
Not 100% sure if it's compatible with PRO. Use some flexible filament. Play with scaling for a perfect snap into place if necessary.
Fits Floatwheel ADV, not sure about the PRO. Includes 2 files. One is more rounded, the other has a flat top parallel to the rails so the board can lay sideways without tipping. I'd recommend thicker walls and a Gyroid infill. Firmer TPU…
Print Settings Supports: No Resolution: 0.2mm Infill: 100% Filament material: TPU
***THIS MODEL HAS BEEN REPLACED WITH AN UPDATED VERSION*** https://www.printables.com/model/1343374-floatwheel-adv-printable-drop-top-fender-base-20 My Floatwheel ADV Drop-Top Fender Bases keep cracking and I wanted a way to print…
I recommend “snug” or “organic” supports for the groove. They are quick to print and save material over the “grid” option.
An internal sleeve for the Floatwheel Adv/Adv pro power button to avoid debris entering the board from the small gap between the rail and internal controller box. Requires a flexible material: designed/tested for TPU 98A. Almost invisible…
Print out 1 fender first in a cheap filament with low infill to ensure they fit before printing with stronger materials. Print fenders and mud guards in ABS or PETG with 100% infill. Foot hooks and AirTag cover should be printed in TPU.…
A 3D printable bumper that's actually good! This has been redesigned to be more durable than the stock bumpers and significantly easier to print. No need to place it at a weird angle and use tons of supports, this bumper can be printed…
Exactly as the title says, a cover for you adv pro power button
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20770 Thanks for your…
Print Settings Supports: No Resolution: 0.2mm Infill: 100% Filament material: TPU
Requested by the community, I release new models in this upload. These parts have an original design and are designed directly on the CAD model provided by Tony from Floatwheel. These new Minifenders respect the height of the original…
This is a remix of a remix from Kagman and echo6152 at…
A Floatwheel fender that allows for maximum tire clearance to fit tires like the Burris 11.5x7x6. Use any material you like for the shield. Polycarbonate and polyethylene are good choices. 1/8" thick should be sufficient. 8" wide. 17"…
Floatwheel ADV Short Fender Burris 7 inch
An essential part to ensure the longevity of the bearings on the Floatwheel ADV/ADV Pro, especially for wet and off-road use. It helps limit the ingress of moisture, water, and dirt into the original bearings, which unfortunately are not…
A no-bs handle to get better leverage when pulling the stator off/on the CannonCore motor.
modified model that perfectly fits into the sidekicks , original model fits only on the naked rails. This one has also overall bigger top to cover the bigger holes on the sidekicks
Fits with flight fins and thundercat
Cannoncore motor for modeling reference. Thank you, Floatwheel!
wanted to use my canon core for something more powerful and had an extra hypercore laying around. works great with more speed than i had before.
Low profile Floatwheel ADV/Pro/ADV2 charging port plug. Nails may be required :) The sealing is made in a form of a thread, so just unscrew and pull it and it will go out. Printing advice: - TPU 95 HF - 100% infill for a head of the plug…
The front and back should be able to be pressed fit into most 6in hub tires. The back has keyed holes for wall mounting.
The design started with wanting to utilized the front Float Life GT grip tape that came with my order of the GT Kush grip tape. I also keep having the “ears” of the stock Floatwheel footpads break so I wanted to be able to be able to…
Based on the ADV PRO model provided by Tony from Floatwheel. This print is designed to be easy and hassle-free: ✅ No supports required - prints cleanly on most printers 🔩 Assembly with M3 × 5 mm screws recommended for a secure fit (parts…
My Floatwheel ADV Drop-Top Fender Bases keep cracking and I wanted a way to print replacements without a ton of supports so I split the OEM model and made some alignment pins to help me glue it together. The top half still needs a small…
This part is my original design and was designed directly on the CAD model provided by Tony from Floatwheel. The goal was to solve a problem I ran into while moving around with the ADV - it's heavy, uncomfortable to carry by hand, and…
This 3D printable wall mount is designed to securely hold your FloatWheel Charger, keeping your space organized and clutter-free. The mount features a snug fit to prevent the charger from slipping while providing airflow and easy access…
I'm printing it with zero bottom layers and 15% gyroid infill for first 1-2mm to make less slippery surface, placing modifier with 100% infill above to make it stronger.
This flexible printed part is designed to add thickness around the battery and reduce any movement inside the back case. That’s why it must be printed in a flexible material . Unfortunately, the original spacers used in the Floatwheel are…
This 3D printable wall mount securely holds your FloatWheel ADV Hyper Charger, keeping your space organized and clutter-free. The mount features a snug fit to prevent the charger from slipping while providing airflow and easy access for…
Translucent, squishy Floatwheel ADV/Pro/ADV2 power-button port plug. The back side of a plug is two-layer thick so it should just bend when you're powering of/off your ADV. Printing advice: - TPU 95 HF See Also Floatwheel ADV/Pro…
If you’re skilled enough to rewire the motor, this part lets you adapt the V3 motor harness to the ADV1 front case . You must use it together with the original large nut from the ADV1 connector. The threads are: Inner: M18 × 1.5 Outer:…
Standard fits easier but may have bigger tire gap, the tight edit will have minimal tire gap (<5mm) and looks better IMO - but fair warning, may not fit immediately! I would start with the standard edit and print the tight ones if you are…
An essential part to ensure the longevity of the bearings on the Floatwheel ADV/ADV Pro, especially for wet and off-road use. It helps limit the ingress of moisture, water, and dirt into the original bearings, which unfortunately are not…
If you’re skilled enough to rewire the motor, this part lets you adapt the V3 motor harness to the ADV1 front case . You must use it together with the original large nut from the ADV1 connector. The threads are: Inner: M18 × 1.5 Outer:…
This flexible printed part is designed to add thickness around the battery and reduce any movement inside the back case. That’s why it must be printed in a flexible material . Unfortunately, the original spacers used in the Floatwheel are…
Low profile Floatwheel ADV/Pro/ADV2 charging port plug. Nails may be required :) The sealing is made in a form of a thread, so just unscrew and pull it and it will go out. Printing advice: - TPU 95 HF - 100% infill for a head of the plug…
Translucent, squishy Floatwheel ADV/Pro/ADV2 power-button port plug. The back side of a plug is two-layer thick so it should just bend when you're powering of/off your ADV. Printing advice: - TPU 95 HF See Also Floatwheel ADV/Pro…
Mudguards Mudguards for the Floatwheel ADV/Pro with BTG tire. I haven't tested them on ADV2 (it has different motor plug) but it should fit coz apparently ADV1 has chunkier motor plug anyway (but better check). Can fit Onewheel Threaded…
This part is my original design and was designed directly on the CAD model provided by Tony from Floatwheel. The goal was to solve a problem I ran into while moving around with the ADV - it's heavy, uncomfortable to carry by hand, and…
This is a redesign of the 6'' inch Rimsaver made on the Floatwheel Original CAD provided by Tony. Some guys have already printed this type of design successfully. I don't guarantee that it will be successful on the first try due to the…
These parts have an original design and were designed directly on the ADV Standard CAD model provided by Tony from Floatwheel. It's similar to the original Design by Tony, but optimized for 3d printing, the external surface is completely…
Description These parts part have an original design and were designed directly on the ADV PRO CAD model provided by Tony from Floatwheel. It's a completely different design from the original Design by Tony fro the ADV Pro (wich are…
wanted to use my canon core for something more powerful and had an extra hypercore laying around. works great with more speed than i had before.
Mudguards Mudguards for the Floatwheel ADV/Pro with BTG tire. I haven't tested them on ADV2 (it has different motor plug) but it should fit coz apparently ADV1 has chunkier motor plug anyway (but better check). Can fit Onewheel Threaded…
Minifender Minifenders for the Floatwheel ADV/Pro/ADV2 with BTG tire. There are 4 versions of minifender: Default board height + extra mounting screws Default board height, no extra mounting screws Lowered 12mm board height (down 1 notch)…
Drop Top fender for Onewheel Pint/X/S and Floatwheel Atom Fender itself is modular and consists of 3 parts: 1 central part and 2 side parts. 18 M2.2 9.5mm (DIN7981) screws are required to assemble. Minifender consists of two parts: front…
![FloatWheel ADV Charger [ADV-180-ADJ]](https://media.printables.com/media/prints/1219126/images/9146703_0c2b112f-7cea-4522-88db-e6a936e30ebd_245e3dbe-205c-4b54-bf0a-fbd47b0276a4/large_display_2025-02-26_09-42-40.webp)
![FloatWheel ADV Hyper Charger [ADV-900-ADJ]](https://media.printables.com/media/prints/1219165/images/9147056_ee7ed067-95d3-4744-ae50-32903073d923_88fd31d0-8f65-4b24-8fb5-6db0533fc984/2025-03-06_15-19-47.png)
