146 modeli
Nerf or other 2mm flywheel balancer Requires at least 2 5mm diameter strong magnets and a shaft out of an old burnt up 130 size motor
Wydruk około 2,40 €–2,94 € nettoWstępna wycena jednego wariantu
Update 03.07.2025 I made another iteration of the rotor which you can find in the filesection and I will also update the assembly and printplate with that one. Added the note to print the shaft in 100% infill after the recomendation of…
“If you see me, it's already too late” SPIRIT A brushless flywheel blaster by wonderboy v1.6.2 - 11/18/2024 Once upon a time, I really wanted to build a T19 dart blaster (by torukmakto4). Some time later, I saw a Gryphon remix with a T19…
This is a kit I designed that converts the Nerf Maverick into a Talon magazine compatible flywheel blaster that I have dubbed the “Mayfly”. It was inspired by an illustration done by the visionary Hotkoin, which you can see here: /…
MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…
This is the clutch and flywheel required for the VW Engine model. Updates: 9/11/2025: Narrowed the clutch pad just a bit.
Schmetterling is officially released! Schmetterling is a compact and modular flywheel blaster platform designed with modularity, ergonomics, cosmetics, and repair-ability in mind. Schmetterling 1.0 is designed from the ground-up as a…
I designed this to lock the flywheel or flexplate on the LS based engines. It held rock solid while I torqued the crank bolt to over 250 lb ft. You can probably get the same results at 60% infill. Print this logo side up. PLA or PLA + 90%…
Replacement gear for the Odin M12 Speedloader. I reinforced the size of the paddles by removing one of the original six. You dont feel any real difference while loading, it is almost as fast as the original gear. You can load 10 BBs with…
Double Impact is a flycore-based, dual talon mag-above grip, full auto flywheel pistol. it was created with three goals in mind: Be the most compact (excluding mags) dual magazine blaster. Be one of the fastest firing homemade blasters in…
A series of flywheel cages for the gryphon that use either hurricane/pulsar or banshee Jr flywheels. Each type comes 32.5, 33, and 33.5mm crushes and two different body types: a standard version modeled after the regular gryphon cage and…
Reposting of https://www.thingiverse.com/thing:3876903 since the files were removed from the site. The files were removed and were made as an Etsy listing. It's not illegal to do so. CC-A-NC-SA allows me to redistribute the previous files…
print with 100% infill PLA works fine but PETG is recommended. Set z seam to random The hole is exactly 2mm to fit a motor shaft but will shrink during printing, it's a tight fit but holds on very well, I used a hammer to push the…
Re-upload of the FP-68 Grass Snake Compact FTW flywheel pistol foam blaster by BigTendies that was removed from Thingiverse ← see archive entry for further details
this is a model of a nerf flywheel I designed because I couldn't find any online. it should be the same dimensions as a regular nightingale flywheel.
Flywheel puller for if you over press your flywheel. This will not completely remove the flywheel. It will pull it flush with the motor stud. Works with a Gryphon with Kraken 130 motor and Kepler flywheel. Needed: 4mm nut and bolt Print…
Reupload of https://www.thingiverse.com/thing:3621882 as they are missing on thingiverse and I cant find it anywhere else that I know (Wayback also doesn't have a good archive for this page either). This is all of the files I have for the…
The Dual Beater is a 3d printed, flywheel powered, single stage (ish), semi-shotgun dart blaster. It uses dual magazines and pushers for individual cycle control using a three stage trigger. If you decide to build one, please contact me…
A remixed variation of the Rochat-style flywheel for the Open Press Project, originally by user “ dddddyck ” on Thingiverse - ( https://www.thingiverse.com/thing:4797673 ). I have rebuilt the wheel to add a handle - you will need one 20mm…
Notable Update: Found a rehosting of this file set on MeakerVI's google drive, will keep these files here though. Reposting of https://www.thingiverse.com/thing:3381961 since the files were removed from the site. The files were removed…
3D printable piece, designed to work with the flywheel puller metal part made by Fetteworst, to pull any Daybreak, Kepler or Pulsar wheels (or any other wheels with the same top geometry) off a motor shaft, without risking bending the…
If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! The Gryphon by Flygonial includes a 40mm spacing flywheel cage, but it's a little too tight for Banshee wheels by Banned Blasters. This…
This is a remix of the flywheel cage for the Mayfly by Gemeneye, to have the proper crush/spacing (19.5mm) for Worker Nightingale flywheels. You can use this with Honeybadger or Loki motors, or other similar high RPM motors. I've been…
This could be the smallest 3D-printed flywheel Nerf blaster ever made. Despite its compact size, it still packs enough power to launch half-length foam darts with impressive performance. To maintain the compact design, I decided to remove…
I wanted to make my own flywheels (hey, why not, right?), and the Hurricane is an easy blaster to mod. I ended up going with a simple gear-like structure. I'm getting about 77 fps average (over a couple dozen shots) with the larger…
The gyroscopic effect of the flywheel allows the car to do tricks and drive on 2 wheels, combined with the bumper it can change course when bumping into something. Inspired by Kikkerland's ZeCar toy, this has been designed to be as…
Used to dampen the vibration of a nerf flycage as it operates goes between the Motor and flycage motor mounting holes, in my opinion a very good idea for printed cages to lengthen lifespan. TPU is recommended but could maybe used with…
This is a remix of the 40mm spacing Carbine flywheel cage and flywheel cover, of the Nerf Gryphon by Flygonial, to support Banned Blasters Banshee flywheels. It is UNTESTED as I do not have any spare Banshee wheels at this time, and I am…
Used for pulling nerf flywheels that have been over pressed. (Unpopular opinion): I prefer to over press and then use this to work upwards and fine tune alignment especially with two stage setups, utilizing a very long hex key to really…
Have you ever wanted to improve the accuracy of your flywheel blaster? Well adding a second stage of flywheels will greatly improve it! These models were remixed from Old Fusion Design's straight and angled flycores for FTW, and…
Flywheel Cages for the Nerf Barricade to be able to fire Elite Darts with stock motors. Available in different crush variants. Cut Outs on the Back Shell of the flywheel Cage need to be made larger. I also added a replacement Muzzle.
Since the only flywheel cage options for the Fearless Fire were either incomplete or a full on brushless setup I decided to make my own. This is a simple 32.5mm crush cage designed for Pulsar flywheels. I went with the smaller flywheel…
2026 July 8 Most recent code is at https://codeberg.org/dr_a_gon/foam_dart_blasters Code here still works, just older. Version 5.1 Added flyback diodes. New Version 5 Updated 2026 May - Single trigger, computer controlled flywheels &…
flywheel cage for nerf vulcan. 40mm daybreak flywheel compatible. Secure in stock vulcan barrel with tape, glue, or short screws. shell cutting and barrel trimming required
So I needed some simple flywheels for my gryphon build, couldn't find them…. Comments on how I can improve them are greatly appreciated!!
Just some simple pieces to protect the motor while pressing on flywheels. Works with a Gryphon with Kraken 130 motor.
https://www.etsy.com/shop/meakerarms Thank you for your support. After way longer than I'd intended, I'm pleased to present the: Meaker Mk16 Flywheel Blaster A solenoid-driven flywheel powered small/medium blaster with a built-in stock…
About An improved fidget spinner, featuring a low-friction central gripping point and a double-helix geared outer surface which provides superb grip for high speed and long duration spinning. If printing using high infill (as close to…
This is a flywheel cage and wheel set for the FDL-GONK, designed to use the new 2207 “Plus” brushless motors from Kelly Industries. The wheels themselves are designed strictly to be printed in sls, as the design is closer to zero…
New file flywheel-spacer (0.6mm thickness) to use between flywheel and camshaft if the flywheel rubs on the case.
Here are 4 models of flywheels you can use with your engine. you are supposed to mount these flywheels onto part 4185 with technic pins, as shown in the pictures. The flywheels are supposed to be manufactured by CNC machining or metal 3D…
Build guide and documentation Typhoon is designed to be a super short bullpup to minimize the total length of the blaster while still remaining shoulderable. It is designed around high concavity brushed flywheels, specifically the Fuijin…
2026 Update The 050 motors are proving inadequate for driving a full length pusher. I'm working on a modification to use TT gearboxes. Beware! Details on reddit:…
print in place no support.
The Flygonial Protean is the spiritual successor of the Nerf Stryfe and an improvement on the original open-source 3D-printed flywheeler platform: the Gryphon. Designed and developed by Flygonial, this modular blaster is the ultimate…
My crude version of a N20 Woozi single stage pulsar cage. Ill maybe make a nicer v2 in the future. Tnx to woody for making the woozi files available for free. original STL:…
A flywheel that I have designed that fits on a 775 Motor. You can use it to repell nerf darts or something like that.
I wanted to be able to fully remove a flywheel, and kelly's puller was a good shape to start from.
Helps you to easily pull out the Worker Hurricane Flywheel. Only an M5 nut and a watch bracelet link removal tool are needed.
UPDATES: 04/02/24 1.5mm fillet added to cage to prevent extension spring sticking to the side of the cage (hand filing the side of the cage will also help clear this) 27/12/2023 Published This is a remix for GnK-90 that adds new cages and…
Slugger is a Nerf blaster that shoots either 4 short darts or 2 full-lengths per trigger pull, fed from a box magazine and propelled by a pair of concave flywheels. The hope was that I'd get better feeding than the P16 magazine (also used…
This print will be of very limited general use, but I thought the approach might be of interest to others contemplating a similar project. The project was to create a mold pattern which would be used to cast a flywheel in cast iron (the…
If you want to print these Parts and attempt this Mod (wich I do not recommend) you will need to print the Flywheelcage once “normal” and once mirrored. Attempt this mod at your own risk, I am not responsible for anything. This is mod is…
( https://www.etsy.com/shop/meakerarms ) Thank you for your support. I'm happy to announce my newest printable blaster, the: Meaker Mark 29 Gryphon - "Opinicus" A manually actuated semi-auto mag fed on-the-fly top loading flywheel blaster…
we needed really big flywheel to use with my sons lego pneumatic motor experimets, as i could not found any, i made one, You can change its weight by inserting something to inner diameter cavity, (i.e. playdough). Ive printed it in PLA…
The meme machine I've always wanted in real life; a nerf Whizz Banger. See a demo of the original prototype (using ahakelly plus motors) below. This original hits 130 fps! (ridiculous) I've since then been tuning it for Dutch Legal Nerf…
Print TPU. I used Gyoroid for a more flexible part, but it was not needed. I can't guarantee what will happen long term with temps, but it won't fall into the bell housing; the lip is too big. In the worst case, it falls on the road one…
This is a remix for the flywheel powered car #3566283. So far thing-i-verse has not let me add the remix info in the right place. https://www.thingiverse.com/thing:3566283 Demo and build video on youtube. https://youtu.be/hgVMQ4UHOGA So I…
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
The Out of Darts Juno is a full-auto rival ball flywheeler "flamethrower" blaster designed by Tarik. As the spiritual successor to Luke's original Project HIR-mini and OOD Jupiter, the Juno has been reworked from the ground up with…
Update 11-02-2026: Fixed lipo door and lower back heat inserts pockets. Here is my take on a brushless mega blaster. It does around 130 fps at 25k rpm. It has select fire, semi and full auto. It also features a pre rev mode, just to make…
Worker Hurricane Flywheels Custom flywheels made for the Worker Hurricane Designed for smooth operation, solid grip, and clean performance while keeping the wheels lightweight and easy to print. Great for standard builds, replacements, or…
UPDATES: 27/08/2026 Fixed TPU mounts not fitting to cage properly New cage plates with more material around holes 30/07/2026 New flywheel cage! This now consists of one printed part, and 2 metal plates to mount the motor. Plate .step file…
What is the Paragon? The Paragon V2 is a solenoid powered vortex fly wheeler that can be semi or auto depending on the set up. it uses the Neutron solenoid by Out of Darts instead of the FTW hyperdrive solenoid. uses standard 130 motors…
I've had 370 sized motors hanging around for ages waiting to be put into a blaster but I never quite found the right one to put them in. Some 370 motors are pretty powerful and would serve as good alternatives to some of the hobby grade…
This is a remix of the original geared flywheel for UK 1 pence coins, Everything else is the same I will be adding the grub screw version when i get round to it. Best printed in PLA or ASA at 0.2mm layer height, 20 percent infill, (PETG…
This is a holder bracket for 3x3mm neodymium magnets (up to 6) that used with the [ESP Rowing Monitor project](https://github.com/Abasz/ESPRowingMonitor) to upgrade my generic air rower (actually a cheap Concept2 clone) with more accurate…
Briggs & Stratton 22 Hp flywheel starter ring gear. Print it from nylon or other heat resistant material. Works well if the original ring gear has weared out. Tried out PTGE - this material will deform if the engine is hot. Nylon works…
This is a set of models for the Nerf Gryphon by Flygonial. These files will let you use Worker Hurricane flywheels or Kuryaka Pulsar flywheels with the longer barrel and a lot of picatinny rail. The 33.5mm spacing is intended Hurricane…
A 3d printed metal top? Yeah! Using the unique properties of our metal Pasta we have developed a High-performance top that spins for over 4 minutes with a strong spin, not only does it work great but looks amazing as well! The finishes…
If you're interested in a prebuilt or custom blaster build, please check GryphonsAndMore on Etsy! The Gryphon foam dart blaster by Flygonial includes a large number of spacings for flywheel/motor crush, and a flywheel cover to go with…
Re-Fork is a carbine form factor half dart blaster designed to feel nice to hold and take standard attachments through Picatinny rail and M-Lok mounting. Note: This is my first blaster design, so there are absolutely going to be flaws.…
I redesigned the Flycore to have more crush with Worker Hurricane Flywheels. (Root diam. 25,75mm)
Required strength is low. I used with draft settings, PLA, single wall, maybe 10% infill. If you use transmission mounting bolts stack washers or put a couple wrenches under the bolt head. See picture that is part of this post.
This is a set of four Gryphon flywheel cages with the spacing (e.g. 43.5) directly in the model, visible from the outside. Initially I'd made versions of this with the spacing printed on the bottom of the cage, which was fine before…
These are high crush flywheels inspired by daybreak and pulsar flywheels, however they only work with stock stryfe cages (43.5 mm). I am using them in a Dart Zone Spectrum 42 mm cage, which is the cage size limit. I would highly recommend…
In V1.13 of the Gryphon redesigned the flywheel cage to allow it to be printed in the opposite of the original orientation: with the side that the motors insert into as the bottom layer. Less supports (though still recommended), and…
( https://www.etsy.com/shop/meakerarms ) Thank you for your support. This is a redraw of Ansuzalgiz's Falcon . At the time of redraw, it was licensed under the GNU/GPL 3.0 . This license permits: Commercial use, Modification,…
The Ruby Flywheel. An Open-Source Customizable Flywheel I thought it odd that there were so few flywheel models for blasters given the amount of flywheelers in the hobby, so I designed this. The Ruby Flywheel is a standard stryfe sized…
REVISED: goBilda hubs fit properly now without modification. Please re-download and delete earlier copies. A compact set of flywheels made with Robotics in mind, but useful wherever the storage of rotational momentum is needed. Either of…
A test to see if I can make the worlds smallest nerf flywheel. Requires gluing the magazine together, switch and safety plates to the flywheel cage. Wire guide is standard stryfe wiring. Hardware- 1 21a microswitch 18 gauge wire 1 xt60 2…
It’s a double stage rival flywheel cage what did you think
Replacement Flywheel for gyroscope. Recommended that you split about the equator in slicer to print without support.
Print at 0.2mm layer thickness; I've only tested this in PLA.
PLA used for the print. Glue needle to the main part.
This tool will prevent the flywheel from rotating on some Kubota engines. It was designed for Aixam Mega 1 with a Z482 engine, but it will probably also fit Z402 and some other engines. These engines are common in moped cars. The tool…
Rubber to mount the flywheel cover to the engine. Printed in Ninjaflex Tpu. No support is needed when printed ‘standing up’
This mesh I created can be used for model train layouts, my intended use, or for almost any other hobby. It prints well with a 0.4 nozzle but would come out cleaner with a 0.2. It really came out nice. Enjoy!
its a triple stage rival flywheel cage
My friend have a Puch Maxi E50 moped with a tuning kit flywheel, that didn't fit in the original cover, and also was running hot in a fully closed cover with the available spacers to make it fit. I therefore designed one on my own, with…
These are the modifications of some shell parts of the GearsVector. Make it able to install WORKER Hurricane flywheels with a smaller size shell. However, this mod is only compatible with the OFD FLYWHEELCORE of 32.5mm. Category: 3D…
3 inch custom flywheel using Andymark Hub Extrustion for a mock weighted flywheel as well as 3 - 1 inch rubber belts as grip.
I rather liked the Nucleus aesthetics but I play a lot of hvz, so I wanted a wider spacing to use with Worker Hurricane flywheels.
Built video https://youtu.be/XQptqLILCpo Demo video https://youtu.be/03NDw8Vpccs The walking 3d printed robot uses a flywheel to power its walking action. Remix of my flywheel car. https://www.thingiverse.com/thing:4643897 that was a…
Both Vector pro and the Srike force blasters share the same flywheel cage geometry. This will work in both interchangeably
This is a customized flywheel cage for the Buzz Bee Air Warriors Ultra-Tek Brute, allowing you to use the smaller Hurricane flywheels made by Worker. The main source is Kuryaka's reference cage, but it also has elements from Open Flywheel…
This top has immense centrifugal force due to its flywheel-like design. It has a large amount of its weight on the edges, and no hard catch-points for spin longevity; but also has bumps to throw other tops potentially into next week.…
I designed this flywheel cage so I could add an afterburner to my Vulcan with minimal shell cutting required. The piece fits into the hole left for the original Vulcan barrel and does not require much, if any, alignment. I would also…
