713 modeli
I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Hier eine mehrteilige Überwurfmutter (17mm) für den Gasschlauch von meinem Grill. Die Mutter kann auf dem Schlauch bleiben so das sie nicht verloren geht.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These are footswitch topper for your Fractal Audio Modeller. They provide a tight fit and make it much more convenient to use your device barefoot or to switch presets with your hands. ---- Did you like my print? If yes please rate it ❤️…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…
Wydruk około 9,82 €–12,00 € nettoWstępna wycena jednego wariantu
FMF El Tri – Mexico National Football Crest (Bas-Relief Edition) : World Cup 2026
Wydruk około 5,49 €–6,71 € nettoWstępna wycena jednego wariantu
Gardena union nut (custom thread) sparepart for garden shower. Sparepart from Gardena: https://www.gardena.com/de/produkte/sparepartscategory/009540010217/ Gardena Überwurfmutter (spezielles Gewinde) Ersatzteil für Gartendusche Ersatzteil…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Mobile holder CFMOTO 450MT
Wydruk około 11,41 €–13,94 € nettoWstępna wycena jednego wariantu
Pressure fit mounting box for FM Transmitter chip: https://www.amazon.com/gp/product/B08PVBZB8F/ NOTE: YOU WILL NEED TO REMOVE THE MIC FROM THE BOARD FOR THIS TO FIT Resolution: <= .28 Infill: >=20% Filament material: PLA Print with brim…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you an Action Camera Holder for FAST/FMA/MICH helmets . A great way to attach the camera to the helmet and then easily remove it. The holder fits perfectly into both helmets and camera holders. Be careful when…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
The power connector was designed for FM1000 series VHF transceivers. The power connectors of these trx are very hard to get. They use standard molex-pc connectors. Printing Print using a 0.25mm nozzle. Use PETG material, it's much more…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recambio bumper para rc XPRESS FM1S. Imprimido en PETG con cuatro perímetros y relleno 15% giroide. Colocar soportes en la parte donde se monta con el chasis del coche. Replacement bumper for RC XPRESS FM1S. Print in PETG with four…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed this bracket to lift the STM preamplifier up on the ScientaOmicron VT-AFM XA. Both reducing strain on the cable and keeping it safe from being knocked around.
Wydruk około 5,91 €–7,22 € nettoWstępna wycena jednego wariantu
I modified OddlyCinematic's Nikon FE/FM/FE2/FM2 Grip with BumpMesh to add some texture to the grip section.
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
PFM-1 (противопехотная фугасная мина) is a Russian scatter anti-personnel mine. There is also a PFM-1S version, but it differs only slightly. The model consists of two parts connected by a thread (body and head). The head piece is…
The original model provided by blinkz did not work on a 765 CFM so I re-modeled it with the proper dimensions. Part is already oriented for optimal strength. Buy me a coffee If you like my work, you can buy me a coffee !
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
A multi part fridge magnet in the shape of Thor's Hammer. Many Mjolnir only come in one piece or are uploaded as just an stl. I wanted to enable people to print it in multiple materials and use their own magnet so I used the model of…
These knobs are perfect for making your own star grip nuts or star grip screws. They are designed for metric screws and nuts with thread sizes M4 – M12 . The different versions and their dimensions are listed in the documentation. After…
Simple print to store your brushes. Please activate the tree supports.
I called it HIT FM Hold It Tight Filament Mount :) ... again am running out of names . Its it is annoying to have so much filament wasted with the flimzy mounted filament sensor all the way to the top , I never liked it, it looks like it…
I have been trying to get my hand on an Alphonse Elric action figure for quite a while.. It aint easy to find one that is really posable. I originally started trying to make one with lucky 13, however with that design, it is not easy to…
This a replacement for a common part that fails in most socket AM2 AM2+ AM3 AM3+ FM1 FM2 machines. I have only used it my AM2+ machine. I would recommend that you print it in a vertical orientation with walls set to 99 and infill set to…
Classic untextured Hoffman Tactical grip 3.1 with a simple beavertail mod. Fits all AR grip mounts that are Milspec. Requires supports on the beaver tail and some sanding. Fuzzy skin settings; thickness 0.1, point distance 0.5.
Suitable for models 2023 CFORCE 1000 CF1000AZ, 2023 CFORCE 500 CF500AZ-9S, 2023 CFORCE 600 CF600AZ-3SA, 2023 CFORCE 600 TOURING CF600AZ-3LA, 2023 CFORCE 800 XC CF800AZ-2A, 2023 UFORCE 1000 CF1000UZ, 2023 UFORCE 1000 XL CF1000UZ-2, 2023…
Halfmoon Mandala Flower Keychain/Earrings 2.0
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye
This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…
My own 3d model of a 120mm fan, more specifically a 200 cfm 120mm EZDIY-FAB fan . I needed a 120mm fan model for a fume extractor I designed, so I took some time and modeled the fan aswell
Drehknauf ( Ø ca. 35mm) mit eingesetzter M6 Mutter Drehknauf ( Ø ca. 28mm) mit eingesetzter M5 Mutter Drehknauf ( Ø ca. 20mm) mit eingesetzter M4 Mutter Turning knob ( Ø ca. 35mm) with inserted M6 nut Turning knob ( Ø ca. 28mm) with…
[EN] Hoffmann-like spacer for 25mm beehive frames. Possibility to fix in a place with little nail, but is not needed. Holds firmly in place when you just click-on. Please, do mirror the object for printing one for the opposite side of the…
2023-11-15 These front inner fenders are designed for the FMS FJ40 Cruiser (1/10th scale). The left fenders encapsulate the servo for the steering wheel and have a slot for a battery strap. These parts were designed and fitted, I didn'…
This is a recreation of the Deep Side bar for a Hoffman-style self-spacing frame for a Langstroth hive or similar. This is a design that has been around for a very long time, but there are some variations in how they are made from…
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
Simple adapter to get you from a 1/4-20 camera mount to 5/8-11 for survey equipment or laser levels which is what I made this for. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .15 Infill: 30%…
This is a simple modification of a8ksh4's “slim_flat” Beepy case, which adds openings on the back to help improve airflow around the Raspberry Pi and closes off the power-only micro USB port so you don't accidentally connect anything to…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
Covers for the m-vave fm-1 knobs that you can print to match the blue/green/yellow/orange color scheme of the sloop CFW.
I needed an adapter to plug this sanding machine to my vaccum (35 mm). It was a little bit tricky to adjust it perfectly. It fit just a little tight to the machine so it won't move when we use it. It's not the best design i've ever made…
Mini FMS Huddison Discord Server (for more information and config files) https://discord.gg/xDKwFYDsZk Mini Autopilot in this video is also available to make. Software used - Mobiflight - https://www.mobiflight.com/ Parts list Pro Micro…
Replaced downward fillets with chamfers and filleted some sharp edges to improve DFM. There is a suppressed feature in the f3d file which contains a patch for the logo. I've only included the right hand version, you can mirror the part…
Da ich bisher keine geeignete Halterung für meine Wasserwagen hatte, habe ich mir eine Entworfen. Diese gibt es in zwei Versionen, einmal für eine und einmal für zwei Wasserwaagen. Entworfen wurde das ganze für das Lochwandsystem der…
Check out other Christmas models:
Kerfmaker pour réaliser des découpes et assemblages. 2 boulons de 4X20mm et 2 écrous de M4 sont nécessaire pour finaliser l'assemblage du Kerfmaker. Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution:…
M-VAVE FM-1 3D Model I designed this model for the M-VAVE FM-1 using SolveSpace , as I couldn't find a suitable model for it online. The model was designed from scratch to fit the FM-1 and was printed in PLA using multiple colors . Feel…
A small 3D printable wind deflector for the CFMOTO 800MT-X. This is designed to sit near the fork area and help reduce helmet buffeting without needing to fit a tall touring screen (not that any screen works to stop this) I am not a…
Sunshield for CFMOTO MT800 First put the upper part and fit the lower part afterwards Holes in the lower part for water drainage
Stanley FatMax FMST1-75779 Shallow Organizer Dividers for the large and small bins I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Included is the f3d file A lid exists, to prevent small washers to move to another bin.…
Screen shade for CFMOTO 650MT / Adventura 2022+ model with TFT display. Can be fitted with original plastic rivets. I used standard PLA and 0,2 nozzle for good logo design. Model with Hockey Kladno logo and without.
I liked the design of the iPhone Dock which is a remix of, however, when I opened the provided model files I saw it wouldn't be easy to modify the size to fit my Samsung S24 Ultra. Instead of simply messing with the original model I…
Halfmoon Mandala Keychain/Earrings
CFMOTO 450MT FRONT ABS sensor cover I also uploaded a version with the bottom part cut off for drainage. I haven't checked it yet.
I needed a holder for the mosquito spiral, this is my proposal… Use a 2-3 mm steel pin
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
0.1mm layer height. Print without support.
This is a remix of one of @CalebKraft’s 6mm trim pot caps, originally designed for the FM-1. They fit the 6mm trim pot knobs found on most desktop mini synths, including the Korg Volca series, Roland AIRA Compact series, Behringer Mini…
Na het proberen van de cover van 4D_printer heb ik er zelf 1tje getekend. Mijn schuifmaat heeft een andere vorm. After trying the cover of 4d_Printer I drew one myself. My caliper has a different shape.
V-Core 3 motor mounts (aka FMMM) The name Full Metal Motor Mount (FMMM) is given by RatRig Discord community. for enclosure1 owners please read comments below Nothing fancy but seems useful for some other users. I was not happy how to…
18.12.2025: On indefinite break from Printables due to work & family - cannot provide support of any kind at the moment. My apologies & thank you for your understanding. My variation of the open-source SpaceMouse v2, with a number of…
Body for cheap MP3 Bluetooth FM player body (small size) from Aliexpress.
I redesigned the Bee Barn XL frame concept by Jim at Vinofarm and optimized it for 3D printing on consumer-grade 3D printers like the Prusa MK3. The new frame design requires negligible "human time" to manufacture, very little time to…
A 3d printable top case for the Atari STFM, it comes in two variants. The first variant is an all in one (ish) that can be printed an large format printers or professional print houses, the long standoffs at the rear are still separate…
Popular cheap portable synth. I wanted more knob options for my big dumb fingers. Mine were printed on a stock prusa mk4 and they're super tight. You may need to scale them up if your printer prints differently than mine. There is a gap…
This is an Art Deco Style FM Radio Project which uses an Arduino as its brain. This design is a copy of a fantastic Art Deco Radio, the 1936 AWA Radiolette . No matter how hard I tried, I didn't manage to discover who the designer of this…
This is the standard grip for the Hoffman Tactical Super lower 3.1 but with a modifier body to add fuzzy skin to the grip and not the upper parts that mate to the lower. The Prusa Slicer files have settings that I use already built into…
A Wolfman or Werewolf is a legendary human who can transform into a wolf or a wolf-human hybrid, either voluntarily or because of a curse or affliction. The idea comes mainly from European folklore and has roots in ancient myths about…
Printed from various materials (PLA, PETG) Mine is not functional. it is only static. To improve the appearance you can use a piece of wire to simulate a cotter pin. The threads fit nicely Watch out for the supports. Unfortunately someone…
(19.07.2021) update : added a 35mm stand receiver This is a remix from the amazing idea of Alexandre Valentim on Focuspulleratwork forum to have an easy way of organizing and storing wcu rings on your focus station. I've modified the…
Update 30.01.2025 Since there was an request and also some new screwdriver arrived at the workshop, Ive done a rework of the Holder. Now availible in 6 sizes :) Those are the dimensions of the hexagon Size Hexagon in mm Size 1 14.4 Size 2…
FMS FCX24 Chevrolet K5 Blazer bottom protector. Works with my FPV camera mount . Needs 8 small screws to mount (make sure they don't stick from other side because they can scratch steering servo). You need to print: 1 Left protector 1…
https://www.printables.com/social/413555-onlyshellsremain/prints Grip for Hoffman Tactical Lower V2.5, V2.6, V2.7 Modified FossCAD MOE grip to make it symmetrical inside, and cut away some material so that a lock washer fits and to reduce…
Stubby attachment for for EGO LB5800 (580 CFM) Leaf Blower. Includes crush ribs on the interior for a more flexible fit and a twist lock mechanism. Useful for blowing off car, gutters, etc. Depending on your printer's settings and…
The stepfile is only the left side. Just mirror the side for the other. printed without support.
Might also fit other cameras ? I printed this in TPU95A with the finest settings my printer allows, and it fit perfectly with a bit of a push+screw action when installing. I am also sharing the FreeCAD file in case you want to modify it.…
I did not create this. A kid named hutchison did for me. I am just spreading the file. Needs work. Remix and spread
I needed a convenient place to put the switch for my auxiliary lights. This mount hooks into the front screw and indexes on a slot on the underside of the left controls to stop rotation Including the fusion file in case you want to remix.…
Replacement wing strut for the FMS Ranger 1220mm. This is nearly the same as the OEM strut save for a small flat spot that should be oriented down towards the bed. Supports are necessary for the two small protrusions that connect to the…
Desktop stand for the NV-FS1 Hardware: M3 x 5 x 4mm Heat Set Inserts x 6 M3 x 8 SHCS x 4 M3 x 16 SHCS x 2
Stanley FatMax FMST1-75779 Shallow Organizer Lid for the small bins This lid exists, to prevent small washers to move to another bin. I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Print with the top of the lid on the…
This is a printable model of a FMC [ en / de ] for Boing 737NG. Original size of 225x150. The display is a 5.0" TFT panel. Ideal for a home cockpit and flight simulator or as a control panel. Buttons: Taster9308 [ PDF ] Display: 5.0"…
This is v1 and it is still in work. Frame can be printed with little supports needed. Transmission mount can be printed without supports.
This is a tool tube for the CFMoto (Ibex) 450MT. It has been customized to store the Icon mini ratchet & extension, Harbor Freight 1/4" 8/10/12/13mm sockets, and up to 10 hex bits. Inspiration came from the design on Uncle Wang's Shop.…
With this mount you can attach the 3.5mm plug under a desk. I use the cable to connect my wired IEMs (3.5mm) to my mixing console (6.35mm) Rodecaster Duo. I've used 3,5mm countersunk spax screws. The cable is a Cordial CFM 3 VY. Printed…
Drew these up myself for ease of printing. STL is left and right. Same file is compatible with front and back. May require 180degree rotation in slicer to make it easier to print. Enjoy.
FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…
Printed without support Designed to be mounted with wood screws from the back. CAD Model…
Brand new model of magazine for Frog Engineering Hi-Capa (TM system) HPA converted GBB pistols!!! Details can be found here: https://youtu.be/4JXC142Xr2Y
Extensor de parabrisas para CFMoto 800MT, usa insertos para Plastico rosca M6 Impreso en PETG 3 perímetros Infill 30% Honeycomb
Diseñe esta visera para ampliar la protección que ofrecen las mascaras de paintball/airsoft de tipo Dye i4 o su clon FMA F1, ya que suelen dejar la frente descubierta. Son modelos muy básicos ya que no tengo conocimientos de diseño y los…
Designed this around the QX-Motor 30mm EDF 7000KV For the FMS Alpha Free Flight Airplane https://www.horizonhobby.com/product/free-flight-alpha-red-kit-467mm/FMM073RED.html . Intake area is slightly more than EDF. Exhaust area is about…
EN: It is the bowl for the OCB tamping machine. There is a compartment for the tubes at the top left bottom left for tobacco and in the middle for finished cigarettes. On the right is the compartment for the tamping machine. For a clean…
Lifmunk from Palworld I recommend using 0.08mm layer height and tree supports. Enjoy!
Wall mount for the EGO 580 CFM Leaf Blower. This print attaches to the wall with 2 screws and fits into the keyhole slot. Recommendations: Mount directly to a stud or wood panel that is secured to stud. Strong drywall anchors may also be…
CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
CFMOTO 450MT oil drain Machining of skid plates is required. Some skid plates cannot be mounted.
This is a simple design I made to hold my Milwaukee M12 FMT multitool. I wanted to be able to hold all the accessories while keeping space for sanding disk and blades. The body is split into two parts because the full model does not fit…
