Wyniki wyszukiwania: formfutura

Sortowanie

38 modeli

P
PrintablesFormFutura B.V.

FormFutura ReFill Systems

Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…

Pobrania
936
Polubienia
81
Ocena
4,71
P
PrintablesRobin Vellekoop

FormFutura Refill MasterSpool

This is my entry for the FormFutura Refill Master Spool Design Contest. To challenge myself I wanted to design a spool that consists of two identical parts, no supports, no separate printed parts for connecting the two halfs and no…

Pobrania
733
Polubienia
79
Ocena
4,92
P
PrintablesFormFutura B.V.

FormFutura ReFill Flange Connector

Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…

Pobrania
414
Polubienia
41
Ocena
5
P
Printables3DMARKED

FormFutura Cardboard Spool Ring 2022

This is a model for the 2022 version of FormFutura cardboard spools. For this version, I used more existing models to create one that perfectly fit my needs. I recommend printing it with the same material that is on the spool itself for…

Pobrania
407
Polubienia
30
Ocena
5
P
PrintablesiMars

FormFutura - ReFill Master Spool - PrusaStyle

This is only a slicer setting change on the original file from FormFutura Technical Design By: Chrizz | Printables.com https://www.instagram.com/es_chrizz https://www.thingiverse.com/chrizz/designs

Pobrania
344
Polubienia
42
Ocena
5
P
PrintablesChrizz

Spool Idler - FormFutura Standard Cardboard Spool

RC-1.5 - 26 Januari 2021 Did some minor tweaks to the model, no need to trash the previous one if printed. RC-1 - 14 November 2020 Do you use FormFutura's, DSM or Mitsubishi Filaments? You know these are all on cardboard spools with a…

Pobrania
243
Polubienia
42
Ocena
4,82
P
PrintablesRobin Vellekoop

FormFutura Refill MasterSpool Respool Tool

A tool to respool any filament onto this ( https://www.printables.com/model/345540-formfutura-refill-masterspool ) MasterSpool. Required parts: 1x 120mm. M8 Threaded Rod 3x M8 (lock)nut Add a 120mm piece of M8 threaded rod and an M8…

Pobrania
205
Polubienia
28
Ocena
5
P
PrintablesChrizz

Master Spools (FormFutura) - Reel 2 Reel Edition - Pack 1

Let's get back in time and visit the 70's / 80's when Reel-to-Reel HiFi setups were more common for the public. We all may be remembering those Magnetic Reels by TEAC, TECHNICS, SONY, TDK, BASF, MAXELL, and so on! Right? No? Yes! Well… I…

Pobrania
163
Polubienia
18
Ocena
0
P
PrintablesMorius

FormFutura ReFill adapter for BambuLab spools

Please consider posting a make! Thank you! This is an adapter you can slide into a BambuLab Spool to make it compatible with FormFutura's ReFill spoolless filaments (750 grams). They have there own master spool but I don't want to make…

Pobrania
144
Polubienia
25
Ocena
0
P
PrintablesFormFutura B.V.

FormFutura ReFill BambuLab Spool Adapter

An adapter designed for effortless integration into a BambuLab Spool, enabling seamless compatibility with FormFutura 750-gram ReFill filaments . FormFutura does have its own 3Dprinted flanges but if you prefer to utilize existing…

Pobrania
140
Polubienia
22
Ocena
5
P
PrintablesTiago Elias

Robert Mauser Spooler for Formfutura refill filament

Robert Mauser Spooler for Formfutura refill filament

Pobrania
136
Polubienia
4
Ocena
5
P
PrintablesEchoDeltaMike

FormFutura SpoolHolder 2022

Remix / Updated model according FormFutura's latest filament roll design. Added 2 small holes to string filament through during storage. If not compatible with your filament rolls, maybe check version “2021”… Prints without supports.

Pobrania
127
Polubienia
9
Ocena
5
P
Printables3DBirdy

Formfutura Refill 2.0 Flanges

This is my version of the Formfutura Refill 2.0 flanges . It features thicker spokes, more holes for filament and thinner spool sides (mainly for TUSH style spool holders). You can either use the velcro straps Refill 2.0 spools come with…

Pobrania
117
Polubienia
12
Ocena
5
P
PrintablesEchoDeltaMike

FormFutura SpoolHolder 2021

For use in older style FormFutura filament spools, let's say model “2021”… To prevent the cardboard from fraying. For use in RepBox v2.3.1 or other roller type filament holders. Filleted for lower drag. Prints without support.

Pobrania
103
Polubienia
10
Ocena
0
P

FormFutura Refill MasterSpool for Prusa Mini

A MasterSpool large enough to be used with 750g FormFutura Refills and printable on 18x18 dish of a Prusa Mini.

Pobrania
103
Polubienia
13
Ocena
5
P
Printables3DMARKED

FormFutura Cardboard Spool Ring 2021

This is a model for the 2021 version of FormFutura cardboard spools and the 2022 differs a little bit but I remixed a version for it also which cand be found here: FormFutura Cardboard Spool Ring 2022 Version I used two existing models to…

Pobrania
94
Polubienia
9
Ocena
3,5
P
Printablesbrsbikes

Filament spool adapter 55mm - 36mm (Formfutura > Sovol sv06)

Filament spool adapter 55mm - 36mm (Formfutura > Sovol sv06). Only 3.6g.

Pobrania
87
Polubienia
6
Ocena
0
P
PrintablesChrizz

Spool Idler - FormFutura 250g Mini Cardboard Spool

RC-1.0 - 1 December 2022 FormFutura released their new EasyFil ePLA / ePETG range. These also come on cute small cardboard spools but they are a bit different and come with a bore (hole) diameter of 53~54mm. The cardboard spools give a…

Pobrania
76
Polubienia
12
Ocena
5
P
PrintablesClement

Raise3D Pro2 Large spool holder for FormFutura 1kg

This is a 79mm Spool Holder that can support FormFutura 1kg spool and permit to close the door for the Raise 3D Pro2. I printed it using the Raise3D with ABS at 0.2, infill 30% Remix of…

Pobrania
70
Polubienia
4
Ocena
0
P
PrintablesYourBuddyDinec

Loyal Moses Spool Holder - FormFutura Remix

The 3 main spools should print great with no support as long as you have good cooling. Just use one of each M and F types. The Hex Pattern ones uses the same 7x1mm hex pattern in the bambu spool meaning you SHOULD be able to use these For…

Pobrania
40
Polubienia
15
Ocena
4,67
P
Printablestinyledmatrix

Partly Laser Cut Master Spool for FormFutura - ReFill 2kg

Modded Version of: https://www.printables.com/model/417748-formfutura-refill-2kg-master-spool-flange Similar size and usage. The two big side plates are now laser cut. The core is still 3D-printed, but much smaller now. It easily fits on…

Pobrania
39
Polubienia
7
Ocena
5
P
Printables3DMARKED

Formfutura Refill Adapter To Bambulab Spool

I created this adaptor for the Bambulab refill spools to be used with the Formfutura refills

Pobrania
39
Polubienia
6
Ocena
0
P
Printablesbamseaske

FormFutura wall mounted spool holder

A wall mounted spool holder for FormFutura filament spools. Other spools with a center hole of 55mm might work too, but I have only tried FormFutura spools. These spools are made of cardboard, and this “rolling” design works very well…

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesBetaNab

Elegoo Spool - Masterspool Adapter (Spacer for FormFutura 750g refill) - FreeCad Files

Convert an Elegoo spool to a Masterspool. I also added a spacer for 750g refills. Tested with FormFutura 750g PETG refill. FreeCad Files available. I used realthunder's FreeCad.

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesTiago Elias

Robert Mauser refill formfutura v2

FormFutura refill flange 200mm

Pobrania
31
Polubienia
0
Ocena
0

Spool for Formfutura ReFill Filament

This Spool consists of two pieces, that have to be stuck onto Formfutura ReFill filament. The Design relies on the cardboard core of the Filament to stay intact. The Assembled Spool is small enough, to fit inside the bag the filament came…

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesTouff

FormFutura Cardboard Spool Adapter

A spool adapter for FormFutura cardboard spools. The key could've been longer or maybe have a lip on the inside. PLA, 0.2 nozzle, lightning filler (15%), 1hr print time

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesBusinessCat

Refill - Master Spool. FormFutura Design Contest.

This is my take on FormFutura Design Contest . Unfortunately my printer broke right after I printed sample of the locking mechanism. The spool features : - Very lightweight design - Easy and durable locking mechanism - Ruler to estimate…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesFormFutura B.V.

Formfutura Fil-0'-Lantern

We turned our mascot in to a jack-o'-lantern Used materials: FormFutura Refill PLA and FormFutura Matt PLA If you want to see more follow us on Instagram!

Pobrania
16
Polubienia
16
Ocena
5
P
Printables0scar

FormFutura Cardboard Spool Center Protector

Print 2 times and press them in the center of the spool. Print them in the color of the filament on the spool. The design is made in OpenSCAD, so completely parametric, feel free to adjust.

Pobrania
15
Polubienia
0
Ocena
0
P

FormFutura Refill 2.0 Spool Adapter

This 3D printed adapter allows you to use FormFutura Refill 2.0 spools with your Bambu Lab Spools. It's a cost-effective and eco-friendly way to continue using your Refill spools, minimizing waste and saving on new spool purchases. Easy…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesbmonkey

FormFutura ReForm rPET- Grey & Black

Remixed text for FormFutura. Used ARIAL BLACK but original design calls for "Berlin sans FB demi" (not installed)

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesZravel

FormFutura refill to Bambu Spool Adapter

FormFutura Refill → Bambu Adapter This adapter allows you to mount FormFutura Refill spools onto Bambu Lab spool holders — perfect for mixing materials and keeping your filament setup consistent. What started as a simple idea turned out…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesRaab6

Spool shaft for FormFutura & ColorFabb Filament for Mark Wheadon's big spool holder

This is a shaft for the big spool holder of Mark Wheadon http://www.thingiverse.com/thing:761893 I designed it to use it with FormFutura filament spools. Update 2016-01-04: I mentioned that it also fits to ColorFabb's filament! The outer…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesNE3D

Slim Centre for FormFutura Refill Flanges

Created a simple and slim screw and nut centre for the FormFutura refill flanges. Inner diameter is 49mm. Should work with the following FormFutura refill flange models. https://www.printables.com/model/959230-formfutura-refill-20-flanges…

Pobrania
9
Polubienia
4
Ocena
0
P
Printablesdaspixel

FormFutura Quick Role Side Panels for Refill Spules

This was designed to need as low material as possible while giving a quick chance to fix the end of the material without the need of any helper that is not where you need it ;-)

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesMiniWorld3D

Hex logos - FormFutura

As we conclude the 10 Years celebration of MiniWorld3D , we want to create a series based on gratefulness to brands that have been in our journey through this time, an acknowledgement to everyone who has been involved at some point and in…

Pobrania
8
Polubienia
3
Ocena
0
P
Printables

FormFutura Quick Role Side Panels for Refill Spules

This was designed to need as low material as possible while giving a quick chance to fix the end of the material without the need of any helper that is not where you need it ;-)