2045 modeli
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
FPV stick Simulator PS5/4 FPV stick for PS5/PS4 controller. Inspired by Taranis QX7 stick I advise to print with supports on the plate
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
I was looking for a carrying case for my BetaFPV Meteor 75 Pro FPV Quadcopter that holdes my drone as well as accessories like batteries, charger, tools, props and a powerbank. Since this is very specific, I didn't find anything out there…
I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…
This is a mini version of my FPV-Rover V2.0 The dimension are 10cm x 10cm x 3cm Intructions and BOM can be found on Instructables https://www.instructables.com/id/Mini-FPV-Rover/ Videos on Youtube: Print instructions Body: Print body with…
Have you ever wanted to mount your drone on your backpack, but it was never convenient enough to buy a separate backpack, or buy a mount from amazon? Well now you can put your printer to use and print this amazing mount. All you need are…
As I had some spare parts from my first FPV Rover, I decided to build a RC car. But it shouldn't be just a standard RC car. Therefore I've designed a trike with a rear steering wheel. Videos: https://youtu.be/wLeIawSgQNw Intructions and…
Did you ever lost a drone? I did not, but several times I was helping to find one. Though without a tag of any type. In the past I was attaching Air Tag with a double sticky tape. Leaves ugly marks and it is hard to mount/unmount. This…
A tool holder for the Torvol FPV backpack. I downloaded the tool holder from Collinhasasthma ( Designs - Thingiverse ) and printed it out, but it wasn't the best for me so I redesigned the tool holder from scratch. The tool holder has now…
With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…
Designed for Eclipson Hushwing , but should fit many similarly sized models. Fits Caddx Ant Nano camera, HGLRC Zeus Nano FPV transmitter and maximum 4.5 mm diameter antenna for cheap (~$35) and lightweight (~10 g) FPV setup. The camera is…
BETAFPV C03 canopy holder, fit for air65 camera and air 65 FC, 10° printed PETG, weight 2.5g print without support tree
Note: A larger version of this drone, able to fit a 20x20mm stack is available: The Goblin FPV Drone I worked hard on this little guy. Poured love into every edge and crevice. Spared no mechanical consideration. And what a beautiful…
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
Print. Fly. Crash. Repeat. Round 2! ----------------------- After the initial version has been out for some time now. It's time for some improvements, thanks to some feedback from the community I got rid of the click-in system and…
ATTENTION: as of 1/21/2026, The Phoenix FPV Drone has been "modernized" to compete with my other 5" drone, the Leopard. Though I maintain that the Leopard is slightly tougher, and the Dragonfly is slightly lighter, you need only choose…
The Wraith FPV Drone This is a 4/3.5 inch drone frame. Mine is printed using carbon fiber PA6 nylon for the body and ABS for the top. I'll list out the specific electronic and mechanical hardware that I used below. This list will also…
ATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing here? A performance optimized beast,…
UPDATE: GreatScott!, a large electronics YT channel, has made an FPV build guide using this frame! Check it out here: UPDATE: I have added camera mount 30mm and rear mount 30mm, as requested by a user UPDATE: I have added STEP files and a…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. This one is with 540 motor. This was requested a lot on the other version and I redesigned the whole rover (although it looks the same) for this…
Let me be clear about one thing. I like drones. And I like printing them. It drives down costs, it makes parts easily replaceable, and it enables all a whole new kind of design philosophy. So I've certainly made a good few of them myself.…
Experimental monocoque 2" FPV Drone frame. This is a work in progress, I might remove outdated models inbetween. Current version features: top battery mount very crash resistant, depending on material (recommended: ASA, PCCF, mechanically…
Many parts of the drone are designed for PLA filament. The motor arms are designed for heat resistant filament (PETG, ABS, ASA). Assembly steps and details are shown in the video. Slicer settings are included in the part names. All…
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…
This is a cheap FPV gimbal for pan/tilt axis. This is designed around common servo, easily found in every online marketplace. The camera used is a old Eachine 1000TVL, but a found the exact same with a different brand. Adaptator for…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
Print your very own FPV Drone (kind of)! It is just a model of a FPV Drone, not really for playing. It was designed as a giveaway for Maker Faire in GermanY Printing: Layer height: < 0.2 Supports: No Brim: No First Layer Speed: <25mm/s
This project is a custom-built foldable long-range FPV drone designed for efficient, extended flight times of up to 18 minutes. The frame is entirely 3D-printed and incorporates a unique folding mechanism for easy portability. The drone…
I looked at a lot of frame reviews and tried to incorporate many design features that I liked into one drone frame. I recommend test printing it to see if your components will fit first as it is a fairly tight build. If slicing use the…
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
It's an open source design. Videos: https://youtube.com/playlist?list=PLgceMsQyNMfT9rvlGa_Ch6L50eUYFBX7_ Git reposistory: https://github.com/alessandroame/MFR Carbon frame version: https://www.printables.com/model/486129 My goal is to…
Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…
This is NOT the lighter "Air" frame (yet). This is the standard Pro edition, which can support up to 35mm props (but not HQprop as they are larger). Also keep in mind that the AIO mounting is 26mm and may not work with all whoop style…
Due to the large number of files, they are archived in zip format to preserve folder structure. Notes, Fixes, and things I forgot to include in this release. I forgot to include the decorative cab plating in the ScoutXL files. Please use…
Hallo, es geht hier um ein sehr leichtes Drohnen Frame das für Freestyle und lange Flugzeiten entworfen wurde. Weil ich einfach nur Freestyle fliegen möchte habe ich mich für 3,5 Zoll Drohne entschieden. Die 3,5 Zoll Drohne versuche ich…
Case for the BetaFPV Air65 TinyWhoop
The vinyl caps that I have had for different SMA connector radio devices I have were always falling off. I made these with the correct ¼-36 thread so that they stay on and don't fall off. Print with thin layers for the best detail on the…
This is the Stingray designed by David Payne. Includes all kinds of parts and accessories. The DXF file is the cut file. Build out of Depron or Foam Board. The PDF files are also ready to print in A4 or US Letter and are provided as 1:1…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your O4 Pro/Lite camera with TPU in front of the lens for maximum protection but…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your DJI Osmo Action 3, 4, or 5 camera with the best mount in FPV! Max protection…
Case for the BetaFPV Air75 Tiny Whoop. The case has a modular design so it can be used for different battery numbers. The Case consists of the Case itself and a Lid to close it. Also a storage insert for four batteries (Lava 1S 450mAh)…
I’ve been wondering for a while: how small can you build a digital FPV drone that still records in 4K? For this project I used a DJI O4 Air Unit and stripped away everything that wasn’t absolutely necessary. The frame is designed so that…
Heavily inspired by these two models: https://www.thingiverse.com/thing:5374521 https://www.printables.com/model/62756-dji-fpv-battery-hub-holder This one includes also the googles battery slot and internal space to hide usb cable. Plenty…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
Can not be used by katcaps
I took the FPV-Rover V2.0 and made some adjustmants to fit my hardware and my liking. Things I have changed: -inner_frame_left and inner_frame_right: I deleted the venting openings. These pieces are now much sturdier. -motor mount:…
3D printable 5-loop and 6-loop helical directional antenna to be used on 5.8GHz FPV video receivers (e.g. FPV goggles). We reached more than 600 downloads! If this model is helpful for you, a quick ❤ will help other makers and pilots find…
so... more = better Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older d
Full Build Detailed in Youtube Video: (Parts list in video description)
Introducing our cutting-edge FPV drone designed for thrill-seekers. With a lightweight 6.5-inch 3D printed frame, it offers the perfect blend of durability and agility. The unique feature of versatile motor mounting holes, spaced 8-12mm…
If you don't have yet the real fpv controller you can start training in a flight simulator using the sticks and your ps 4 controller. It's not the perfect solution but it will do the works till you get a real controller. Print tips: no…
# Printable TBS Source One V5 ## donate if you like…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
I modeled some thumb-sticks for my Xbox one controller for Lift off; a FPV drone simulator. It has a 3mm screw hole in the mounts so if you want to make your own thumb-stick all you have to is make a thread 3-4mm deep thread to interface…
Hi, this is Robocat 270 quadcopter keychain, i made it to look like a real one ;), i hope u will like it. There are two versions, the one with antena have a hole where you can put a piece of 1,75mm filament to imitate antena, second one…
RUSHFPV MAX Solo 30.5x30.5 Mount Optional standoffs that can be placed under the mount to allow for more airflow under the VTX I printed this in TPU with supports on for the main part I have also added a version with recesses for M3 nuts
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
so... more = better \_(ツ)_/ Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older
5 inch FPV drone - G4ZO x2 frame A frame for a 5-inch drone that I designed, in my unprofessional opinion I feel like it flies pretty well. I printed it from PLA but its melting point is too low and maybe it's better to print from…
Countless hours spend poring over a screen into the small hours of the night. Many a cup coffee chugged. All so you could power trip while flying the 3d printed equivalent of a mosquito on steroids. Enjoy my friends, the majestic…
I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…
Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor. Wanted to be able to use it on my radio as the goggles done work with my eyes. Screen attaches with a standard ¼" tread 5/8" machine screw. See the attached…
BetaFPV C03 camera mount The design combines the idea of brighfive's Bribrain LowRider version requested by the legendary TDog. Features: Available Angles: 10°-60° @ 1° interval apart Weight: Approx. 0.573g Mounting Pattern: 25.5x25.5mm…
More info: https://hackaday.io/project/25092-zerobot-raspberry-pi-zero-fpv-robot/log/97988-the-new-zerobot-pro How to get started 2018:…
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 4th and most sophisticated iteration. The design builds on my previous completely 3d printed frame NLR35. The goal was to make it lighter, more powerful and yet fully…
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 3rd iteration, you may know the previous versions https://www.thingiverse.com/thing:4743497 and https://www.thingiverse.com/thing:4818009 This time, the design aim was…
It's finally here. The new FPV-Rover V2.0 This is a remix of the drogerdy designed by timmiclark. http://www.thingiverse.com/thing:700835/#files Upgrade 01: http://www.thingiverse.com/thing:1269962 Upgrade 02:…
A modular case to easily carry the BetaFPV Meteor75 Pro O4, batteries, and a few spare parts. Prevents squishing the drone when transporting it. Even if the battery holders can work with the standard case, I'd recommend choosing a cut…
Simple FPV drone frame for BetaFPV Air 5-in-1 Controller and 1103-11000KV motors.
This is a Holder to hold the DJI FPV 3 Batteries and Hub. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: ESUN PETG Clear Notes: This is my first posting. Category: R/C…
Yeah that small drone is flimsy. I do understand, betafpv shaved every gram to keep that thing as light weight a possible. But I really didnt like the fact, that this small beast will tumble all over the floor the moment you up it on the…
Because dron lands on battery, i made a little protection cover for it. because it slides over a cable and on bottom is secured with battery feet it does not require any glue to stay in place. Print Settings Printer: Two trees saphire…
All parts can be printed with PLA. Layer: 0.16 or 0.2 Infill: FullAll
A lens cover to protect your DJI FPV goggles. Fits well into V1 and V2 of the FPV goggles. Print in TPU, doesn't matter
A simple, small box for storing and safely transporting the Air65 drone and 10pcs LAVA 1S 300mah (260mah) batteries
Filament ABS Nylon Layer 0.2 Infill 15% Infill type Rectilinear Support + Support type Snug
**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…
A simple battery holder for goggles V2. Holds very well in place, ultra light If needed, to get better clip, you can warm it into hot water and bend slightly the clip. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
This is a remix of the Pavo Pico frame for 3s batteries by al-bandit (@albandit) in order to serve as a replacement for the original frame with 2s batteries. This is designed to accept threaded inserts which should be similar to the…
Printed upright with no supports. Large sticks can be removed using an m3 screw down the centre, to push the original stick out. Or use the steak knife method by gently cutting a split and they remove nice and easy. I cleaned the inside…
Changelog: 2024.01.27 : Add file pavo_pico_duct_with_feet_flanged.stl: Height is +1mm to a total of 6mm Flange the base to +1.5mm all around for added strength and overall stiffness Lightweight replacement frame duct for the BetaFPV Pavo…
I designed this to get my Caddx Nebula Nano into an ImpulseRC Apex 5" Frame. But it should fit into every frame with a mount distance of 20mm. I left 0.3mm of space to make it fit better. It is 19.7mm wide on the outside and there are…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
This is an excellent project that combine the knowledge of 3D printing, Arduino, and FPV (First Person View) camera. It is a great beginners project for anyone interested in making their own RC tracked car, or just want to use 3D…
This is my first custom designed fpv drone frame to be cut by cnc from carbon fibre sheets.
A Great Screen protector for your DJI Digital FPV Goggles. With this model you no longer need to worry about settings your goggles down on a bright and sunny day. Also adds 2 extra slots for Micro SD cards for when you fill up your main…
First of all: DM me on Instagram (@ente.fpv) so I can make a mount for YOUR frame specifically :) Say Hello to the DUCKY MOUNT The okayest mount for the DJI Action 2! The DJI Action 2 is known for having a VERY fragile backscreen . To…
BD1 “Chimera” Made in Poland Chimera is 2,2" freestyle cinewhoop type drone, for 3S batteries, with fully 3D printed construction Ready-to-flight mass(with lamp, battery and wings) : <200grams Carry weight : Can fly with light action…
Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props and more!Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props, the…
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Updates : 2025/02/10 : upgraded parts for DJI O4 Pro support (cam plates & top…
![BetaFPV C03 camera mount/canopy [Improved Complete Set]](https://media.printables.com/media/prints/5388c6c5-f443-476e-a91c-2cb185f211f6/images/11110340_e9dbe0a0-128d-4b63-b2fb-100d6291ac5f_1c42e2f3-7b8f-4de9-a9d5-c1a2f3042f00/screenshot-2025-11-08-212802.png)
