13 892 modeli
Extruded fractal flake prototype. A predecessor to the fractal flake vase I made some years ago. The basic shape and parametric model is almost the same: A variation of the Koch-curve with hexagons, which changes in rotation and…
Wydruk około 6,55 €–8,01 € nettoWstępna wycena jednego wariantu
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
A scan of my hand that's modified. There are also a six holes to mount it to a wall using a flat head screw or equivalent. (Don't use all screws at once they're there to mount it in one of 6 directions.) Printing the included .3mf file…
Wydruk około 5,88 €–7,19 € nettoWstępna wycena jednego wariantu
Model consists of 4 bars (two sides, upper one and lower one) and four connection pieces. The longest one is the side bar and can only be printed diagonally on the bed. Lower bar has two integrated latches that hold the picture from the…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Wydruk około 5,59 €–6,84 € nettoWstępna wycena jednego wariantu
You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. 0.3mm, rPETG, 5h.
Wydruk około 5,15 €–6,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Wydruk około 87,94 €–107,49 € nettoWstępna wycena jednego wariantu
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Wydruk około 4,10 €–5,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
San Francisco 49ers 1st Layer Black 2nd Red 3rd Gold 4th White 5th Black
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Easy to assemble stand for a 4”x6” photo frame. Having a few homemade ¾” hardwood photo frames for 4”x6” photos, it was only natural to come up with a sturdy stand for them. Hopefully these will work for you. The stand’s back is around 6”…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
This is simple picture frame with stand. The connection between the front part and the rear part is press-fit. Originally the frame was created for a picture height / width: 105 mm / 150 mm (PictureFrameFront.stl,…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wondered what a space filling curve might feel like to play with, so I made this. Even though it kind of looks like a space filling block, it is indeed just a single curve looped in on itself and thus can be printed in spiralized vase…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
The Frauenkirche in Dresden is an Evangelical Lutheran church of the Baroque and the defining monumental building of Dresden's new market. It is regarded as a magnificent testimony to Protestant sacred architecture, has one of the largest…
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Remix of my IKEA Halvklart lithophane picture frame New back design Added more stars New button What you need Printed parts (frame, cover, button) IKEA Halvklart USB LED spolight Don't forget to look at the remixes that use different…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
It prints perfectly on my mk3s with no supports. Make sure to print in PETG and wash the part so that it is reef-safe.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Wydruk około 25,42 €–31,07 € nettoWstępna wycena jednego wariantu
Update 2022/04/19 I've created a version of the Mark 3 arms for 2020 VSlot aluminum extrusions. Check out the remix section! Update 2019/10/18 I've imported this project from my Thingiverse account. To make things clearer, only the Mark 3…
Wydruk około 4,28 €–5,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check out my Amazon Page to see what kind of gear I use to make these models! This was designed to be used as a classroom exercise to teach students about 3D printing, math, and design all at once. Print out these blocks and assemble them…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
This is a hinge to attach an acrylic glass door to a wooden frame. The provided objects are for a 10mm wood panel with a 5mm acrylic glass sheet, inset by 5mm. The model contains a spacer to compensate for this 5mm inset. If you have…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a beefed up Y-axis motor mount for the i3 MK3S with built-in end stop. The advantage of this design is that the linear bearings won't hit the backplate of the frame anymore to mark the back end of the Y axis. Instead, the belt…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 12 piece jigsaw puzzle based on the Peano-Gosper curve , also known as the "Flowsnake". The Flowsnake fractal creates a snake-like path that never crosses. The path fills the complete space of a “Gosper island”, which resembles…
Wydruk około 5,11 €–6,24 € nettoWstępna wycena jednego wariantu
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena jednego wariantu
UPDATE: added a currently untested version with a small hanging hole, the files for this print are marked with _hang stargate: print with supports at 0.12 base: no supports, i printed at 0.12 but 0.2 should be fine base: no supports, i…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
If you like it feel free to leave a comment or even better,buy me a "coffee": https://www.buymeacoffee.com/redangel1984 If you are looking for bracing/stiffener for your printer which uses 2040-AluminiumExtrusions for the frame, look no…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena jednego wariantu
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits most picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork.
Wydruk około 4,55 €–5,56 € nettoWstępna wycena jednego wariantu
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: remixed original frame 2 part, so it contains holes for M3 nuts assembly result is then more robust and tough no space between 2 frame parts also added eyelet so it can be hanged other original model parts can be reused
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
Wydruk około 3,12 €–3,81 € nettoWstępna wycena jednego wariantu
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
Based on the design from @Kittelot and trimmed in order to fit on the Prusa Mini. I also removed the center of the backing in order to save on material since it was not required. It fits 4x6" photos nicely! Print Settings: Print with…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
A simple 4x6 picture frame. My daughter needed a picture frame for a school project. Nothing too fancy, just glue or tape the picture into the frame.
Wydruk około 5,89 €–7,20 € nettoWstępna wycena jednego wariantu
This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…
Wydruk około 4,98 €–6,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check out the attached instructions.
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
This upwards facing picture hook is made for canvas printed posters on wooden frames. They have a closed wooden frame all around and getting them on the wall with a zero gap is difficult with normal picture hooks. That is why I designed…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🔒 Notice of Use This design is for personal, non-commercial use . Commercial use is not permitted, either digitally or physically . 📩 If you would like to obtain a commercial license , please contact me directly or sign up here:…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
A Mickey Mouse shaped picture frame. The "portal" diameter is 90mm (about 3.5in) and nicely hold a picture with a diameter of 101.6mm (exactly 4in). I cut my images from a 4x5 printed photo to size using the included "disk.stl" file as a…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena jednego wariantu
Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
This is a variant of the Gosper curve which forms a closed loop. Inspired by an idea shared by @Ema that used a different subset of this curve, I wanted to investigate what the space filling hexagon looks like inverted. Multiple copies…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Bulldog stilizzato silhouette wall decoration. Sono presenti 2 file, uno intero, mentre l'altro è sezionato e ingrandito del 170%
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
I wanted to have a picture of my family on my desk at work, so I created this simple Instax photo frame. Prints at 0.2mm, no supports, Prusament Galaxy Black PLA. UPDATE: [03.03.2024] V2 Design available with bigger clearance and extended…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
I modeld this for my son to play with and as an experiment to check if a glasses frame can be printed. Adjust the scaling get the dimensions right Printing: 0.2 or less layer hight I used black PLA+ No supports needed! Materials: A wooden…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
Print model with PLA, PETG, ABS using 0.2 layer height, 15% infill. I use 0.6mm nozzle but 0.4 will also work. Prints without support. You will need 2 small magnets per frame: 5 mm in diameter and 2 mm thickness. You can get them cheap…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was designed to be a table display for Instax Frames. It can be used together with my Instax Frame and Keychain model or with standalone Instax frames. Printing Advice This model requires a little bit of support on the camera…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena jednego wariantu
A take on the fractal vise utilizing flexures in place of the bearings for the rotations. I've got a running article on the various versions here , and the models for this one and V5 are on OnShape here . This rev is essentially just a…
Wydruk około 7,74 €–9,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Picture frame (3 versions) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Simply slide in the back plate, then push the plate back a little at the free end (the…
Wydruk około 2,57 €–3,15 € nettoWstępna wycena jednego wariantu
A simple, quick-to-print design, borne of the necessity to afford a modicum of protection to this hardworking educational tool in its travels to and from school. Plus, who wouldn't want a Micro:Bit on their fridge or whiteboard? Design…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Schild mit der Aufschrift “Infoschalter für besonders bescheuerte Fragen” Eignet sich zum aufhängen Nur 2 Farbwechsel für den gesamten Druck
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
It's a frame to hold an engraving tool to cut round glass objects. This is the first prototype. I only updated the back-end plate (file "Bottle_cutter_slider_02" and see photos), now it is more rigid but its purpose is not to prevent the…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
A simple surface mount ATX PSU support frame. Works well with an EVGA 1000W PSU. Printed in PLA, more infill is better! 6x bolts (I think I used M6) required + ATX PSU mounting screws. Absolutely no warranty implied or given if you use…
Wydruk około 23,62 €–28,86 € nettoWstępna wycena jednego wariantu
To fix the frame with the 2.5" drive, use the original screws that are used to fix the 3.5" drive to the cabinet. K upevnění rámečku s 2,5" diskem použijte originální šrouby které se používají k upevnění 3,5" disku do skříně.
Wydruk około 0,84 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
===Update=== Stand added ===Update=== Instax Mini Magnetic Fridge Frames, with an overall thickness of only 3mm. I recomend the textured sheet for a shiny surface finish. The frames can be equipped with magnets (6mm x 3mm x 1.5mm) to…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple mount to keep the Thermometer secure and in one place
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Its just drone frame with legs. I printed this on 30 x 30 cm table soo it can't fit your table. Make sure that fit.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Got a second-hand Define R6 case to fill up with drives, but it only came with one useable tray. So instead of paying above the odds for them online, I messed around in Fusion 360 and made my own! Nice snug fit, has the same tab that the…
Wydruk około 3,11 €–3,81 € nettoWstępna wycena jednego wariantu
Simple little holder for instant pictures
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Make your collection visible Multiple TCG sports cards wall holder and display frame for PSA, SGC, USA, BECKETT cards and also for UltraPro cases. Redesigned all my previous cases to use with one universal stand for better stabilty and…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
I modified the wheel for the Xbox controller that the cable fits in. That's good for PC-Players without a dongle, like me, or everybody who wants to charge the controller while racing. I reduced the speed and heat to prevent stringing,…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Hi! I didn't find some nice easy to print simple picture frame for Fujifilm instax mini so i draw 5 models. Really easy to print. You can print the 5 frame on a MK3S in one print with no skirt. Their hole in the back to hang them on some…
Wydruk około 7,19 €–8,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Instax photos are really cute and make for a nice little present when you meet with friends and family that you dont see in a long time. I designed these little frames to turn an Instax into a little present I can give to my loved ones,…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
This design is based on the clips of the original MMU2S frame attachments, but I needed a frame that keeps the MMU horizontal and as low as possible. I have a height restriction due to the limited space in the IKEA enclosure. The part is…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sawtooth picture hanging bracket with a slim 3mm profile. Designed to be attached with 2 - #4 flat head screws. The bracket is 40mm wide and 8mm tall, with a 1.5mm recess to afford for the nail head. This model was designed for 3D…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Webcam Step: Elevate Your View Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
What do bandit camps, archeological dig sites, war camps, traveling troupes, and forest camps all have in common? Work tents! I love tents as scatter terrain for rpgs, but I find the most tedious part of crafting them is getting the core…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Pequeño frasco para guardare cosas
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fan duct for 140mm front fan for Fractal Design Define 7 computer case. It helps keeping the GPU and m.2 ssd a lot cooler when using for example Noctua 140mm PWM controlled fan. My GPU was overheating all the time, Define 7 doesn't have…
Wydruk około 14,86 €–18,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of a Mainframe z16 model in Fashion scale/Barbie 1:6 size with scaling at 327.84%. Size (HxWxD) approx. 35,6cm x 11,4cm x 22,2cm Remix differences The model is cut into 4 pieces with assembly joints for M3 threaded inserts The…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
I created this glasses frame for a friend so his lenses would fit perfectly. The model is fully parametric and was designed in SolidWorks. By modifying the lens sketch/profile, the frame automatically adapts to the new shape. This makes…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
This is a small picture frame that fits the Fuji Instax Mini perfectly. I hope you enjoy it. I would love to hear feedback and, better yet, see your prints. I am currently working on a two-color version as well. Printed with .4 nozzle…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
This is a replacement hanger to attach a Kryptonite bike lock to your bike frame. This is a complete remake, but inspired by an original from Peite, with a few changes: Cleaned up and some fillets added for strength and smoother looks.…
Wydruk około 4,53 €–5,54 € nettoWstępna wycena jednego wariantu
This elegant wedding-themed Instax photo frame is the perfect way to display cherished memories from the big day. It features a beautiful floral pattern design and a dedicated space to add the wedding date, making it a unique and…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
Bilderrahmen für Fotos mit den Abmessung 10 cm x 15 cm Düse: 0,4 mm Schichthöhe: 0,2 mm Filament: PETG für andere Abmessungen Bildgröße angeben
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Schlüssel zum Öffnen der Revisionsöffnung am Frischwassertank im Camper Wohnmobil Wohnwagen
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: 160mm X 160mm X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: FRANCE, GERMANY, POLAND, ITALY.
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
If slicing yourself, orient with the text face on the bottom Prints without supports Print in PETG Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C. Gcode provided is for MK3.5 * warning - one…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
“Keith Haring signs an obvious motive of love!…..The heart is in celebration, the two characters gesticulate, as if carried by the euphoria of feelings. The contours are frank and clean, thick black lines which have made the young street…
Wydruk około 4,26 €–5,20 € nettoWstępna wycena jednego wariantu
Bike Hook for Cargo Bikes (Inspired Design) This is a 3D-printable S-shaped hook designed to hold small bikes or balance bikes on the outside of a cargo bike. The design is inspired by commercially available cargo bike holders , but fully…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
neodymium magnet 60*10*3mm 8pcs The magnet I bought was slightly smaller than spec and I put thin painter tape on each side to fit in square cavity. These magnets can connect with frames or Q11 directly and steady. rubber foot 24 pcs…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
Bird nesting house with 3 different looks Timber frame, Bricks and Football. You will need all the common files and a set of one of the designs to make a house This Bird house can be assembled mostly mechanically, only the Rooftop of the…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This the Benjamin Franklin Clock version that B&B TECH shared. However, I wanted a better mounting for the clock and a more appropriate pendulum bob that suited my 6mm dowel. I also had lead sinkers on hand to use as weights and therefore…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Hinweisschilder fürs WC.
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
Glass magnifier replacement frame 100mm. Just printed both parts, base and ring with PLA. Insert the glass lens into the base. Lock it by firmly pressing the ring against the glass lens. Warning : take care to insert the ring with the…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
Replacement for missing 2.5" drive caddy on the back side of the motherboard for the Fractal Design Define C case. Modelled using a case bought in 2017. I printed it in two parts with the middle drive holding the two parts together.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed additional protection for the chassis of my Tamiya Neo Fighter buggy. While doing some jumping around I noticed that the rear part was ruining and with it the screws too. With this additional protection the rear frame and…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple case / frame for Picopad Pro. 2 versions: with / without text (function of slide switches). Version with text need thinner layer (0,1 - 0,15 mm). Use 2 pcs M2 threaded inserts (CNC kit / Prusa) for video card. https://picopad.eu/…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Remix of MMU3 Spacer for MK4/S frame. End of spacers was mofified to be wider to be able to fit on MK4/S frame. Update: added locks to hold spacers in place Thanks for the original design...
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Box for housing the light switch and routing cables to lights. Mounts via double-sided tape on top of the MK4 power supply with extra brace around the frame for rigidity. The cover plate is attached by M3 screws which cut treads into the…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
