Can holder + hook for Segway Ninebot MAX G30 D
Combined can holder and hook for attaching to steering shaft. M3x5 screws + nuts used.
Wydruk około 4,72 €–5,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 508
- Polubienia
- 79
- Ocena
- 5
192 modeli
Combined can holder and hook for attaching to steering shaft. M3x5 screws + nuts used.
Wydruk około 4,72 €–5,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
Wydruk około 3,70 €–4,53 € nettoWstępna wycena jednego wariantu
I created this adaptor plate because I wanted a cup holder on my electric scooter. There was a lot of options for bicycles (even a standard mounting system) but nothing for a scooter. This adaptor plate bolts onto the steering stem of the…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Requires:Original G305 PCB, Scroll, Side Buttons and Screws. Requires 4* 5mm Diameter 3mm Depth magnets. Requires 4* 5mm Diameter 3mm Depth magnets. (may need glue) rotate top -55 degrees, rotate Rear 90 degrees. If you enjoy this mouse…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Full instruction writeup on instructables: https://www.instructables.com/Razer-Viper-Mini-Wireless-Mod-G305/ It will likely ask you if the baseplate file should be separated, it should not be. I can no longer combine the bodies in Fusion…
LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…
An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact
Gashebel für E-Scooter Ninebot
-58g with holes / 63g without holes. Weight will vary based on battery and print material. -Wireless using G305 Internals -Rechargable AAA via magnetic microusb tip -Designed for FDM printing -No soldering required FREE THINGIVERSE TEST…
I used canopy model from GrabCad and tinkered simple mount for GPS. I used black PETG till layer 86, paused, changed filament to TPU, reduced temperature and printer the upper part with it. Came out nicely. But it can be fully printed…
For best results I recommend Resin printing. I included an example model of how I Resin printed this on a Anycubic Photon Mono X using Anycubic standard Black Resin. 2 Layers of dark gray spray-paint (I ran out of black spray-paint). 2…
Remixed from: https://www.thingiverse.com/thing:4600978 https://www.thingiverse.com/thing:3823244 https://www.thingiverse.com/thing:3969266 I used the tinfoil and lithium battery for a big while and I was looking into making a battery…
I have had success FDM printing this model. Mods I did to the Logitech g305: Replaced the AA battery with a AAA battery and spring. SLA printed back cover Weight 79g total with the SLA print coming in at 3g compared to the stock 7g back…
Update03: Added Bracket for heat inserts M3x4x5mm. Update02: Added bottom hook for U-LOCK - ULTRA COMBO 245/153C. Update01: Addetd top hook for 25mm thick shackles with inner Diameter 100mm. Since theft protection is an important issue…
Just a Remix of the Logitech G305 battery cover with Logitech Logo
Alternative mouse shell for G305 - Semi Ergo Shape - GPRO Feet compatible - LiPo replacement. Best filament with most accurate results is Extrudr XPETG so far. It does not warp like PLA or regular PETG and has good sanding properties.…
Meet the sub-40g Z(H)ero Mouse, inspired by Optimums Zero Mouse. Parts required: -Logitech G305 Lightspeed https://amzn.to/3EqIv8R -Lightweight Lithium Battery https://amzn.to/4hvylmi No additional screws/hardware required! I designed…
JREV Floor Extension
Spend $20 for rack-mount ears for my Cisco 10-port switch!? Forget that! These printed ears are MORE than strong enough at 30 percent infill, even with some other stuff stacked on the switch in the rack. My SG300-10P used 12mm long M4…
This is a simple, fully 3D-printable charging port for the Ninebot G30/G2, designed with flexibility in mind. You can choose between versions that accommodate an XT60 connector with or without a button, depending on the file you select.…
Ninebot G30 Spacer is used to install a bigger battery in the battery compartment. This is my version with 7mm walls. If needed you can grind down the top siderails where the spacer is mounted for even more space. Perfect for…
Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…
Rear Axle Bracket as reinforcement and for 125mm axle drop out motor brake disc mount adapter
Cinelog30 v3 GPS GEPRC M10 mount 25x25x8.2
Used filament as a pin for hinge and latch. The mouse fits comfortably without moving around and without the side buttons been pushed while inside.
Simple fixing of video antennas to avoid that with any collision or contact the antennas fold, since I realized that it is very easy and they go directly to the propellers, causing a major failure in that case, with this piece and two…
This a new design but I drew inspiration from Ninebot G30 AirTag Hook by mhaehnel | Download free STL model | Printables.com . The screws line up a little better and I have included the step and fusion files in case you want to modify or…
So we've got the ZS-VML here. A 3d printable mouse designed for FDM printing. It's a symmetric mouse that's based off of the Razer Viper Mini. It's got a lower hump, higher front, and slightly wider sides. You can find this mouse and more…
This is a G305 Internals Shell shaped like a mix between Sensei Ten and Endgame XM1. You need 6 6x3mm magnets and quite a few M2 Screws in different lengths - you can buy a set on Amazon and you will be fine (Button/Socket/Flat doesn't…
These models extend the handlebars of a G30P 25mm for better control. For use with stock grips. This update vastly improves rideability of the scooter. Snug fit, will require a rubber mallet and finesse. I suggest printing more than two.…
Base holder is made out of two parts, front and back. Update 20240806: There is now a V2 with mountable threads also for front and back, can be combined with old V1 for left, back and right or left, front and right mounting. Screws and…
Turn your Logitech G305 into the best ergo mouse in history! (which is G703/G603 imo) I made this because the G305 is still the cheapest good wireless gaming mouse in my country. HUGE credit to Rollinsloth's RS4 design;…
First two pictures are the “Big Daddy”. Second two pictures are the “Slim Boi”. The Big Daddy holds the G305 and three AAA batteries. The Slim Boi just holds the mouse. Print settings I used in the pictures are 0.3mm layer height, really…
From thumb throttle to hand throttle
A practical modification for your e-scooter
I really liked the idea of FKrueger89 to implement an iPhone Magsafe Holder in my car: https://www.printables.com/model/225145-magsafe-phone-stand-for-bmw-cup-holder/comments/364302 Because of the deep Cupholders in my car his design…
This is a remix of the VIPRO v1 Mouse G305 Shell that changes the battery to a USB charging AAA battery. Additionally the design was modified to allow it to work with later G305 PCB revisions that have a few larger components that…
Handlebar Bracket for 31.8mm handlebars
AJED Rear Axle Brake Bracket for Ninebot MAX G30 This bracket is to mount a rear brake system + increasing the maximum torque transmission (It acts like a huge torque washer) Please use maximum 2mm washers on the inside, otherwise a 125mm…
Here is a 20s6p 21700 cell holder designed for the Ninebot G30. V1 460mm (L) x 117mm (W) x 23mm (H) V2 460mm (L) x 117mm (W) x 13mm (H) making it an ideal fit between the two weld seams in the frame. It also provides sufficient space on…
Wanted a lighter, more ergonomic base for the G305. I wish I could transition away from Google Sketchup so I could make the polycount higher and make it more polished, but this model took me about 45 hours of work and it pissed me off…
Ninebot G30 Stealth Spacer Here we offer a few free spacers which can be 3D printed by everyone. Please note the license agreements before downloading or using these files. These spacers are NOT compatible with our aluminum floor system.…
i made my own rear fender for the Monorim rear suspension, the one they supply is a 2 part fender that is just horrible in my opinion. I broke min within 1 week, so i designs my own. when you print is you need to slice it in half and if…
This is a rack ear meant for a Cisco SG300 series switch, specifically the SG350XG. The bolt pattern is 20-28mm squared (20,24,28 steps) so it's a bit more universal. I'll be posting a very similar one as a universal rack ear that's not…
There is no soldering needed. I designed it to work with a triple A battery in lieu of having to solder a bit and using a different one. You will need to cut a few things. Specifics can be found in the google doc which details all…
Print with at least 40% cubic infill Fits in and replaces the original fender
Eine Einfüllhilfe für alle G31, G30 Modelle bzw. für die 5er / 7er Serie die dieselben Einfüllstutzen verbaut haben. A filling aid for all G31, G30 models or for the 5 / 7 series that have the same filler necks installed. Material: PETG…
12x12 mm Nano GPS mount to keep track of your flight safety, speed data, etc. It doesn't require long screws; you can use the original ones. It's installed under the antenna mount and is very lightweight.
Floorextension 20mm
ATTENTION!!! Don't forget to add a pause in the Slicer at the exact layer height to put the magnets in place. Make sure to put magnets in correct orientation!!! Model uses 3x6 mm diammeter neodimium magnets.
guide: https://medium.com/@zoroseerus/zs-a1-3d-printed-symmetric-wireless-mouse-guide-607e6e8e19aa -Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable AAA via magnetic microusb tip or 675 coin…
Mini TSC is a controller for the G3000 series of panels, such as the TBM930 and the Vision Jet, also can be adjusted for the Longitude, Honda Jet panels. This is a very quick and easy build, as it just clips onto side of a 7 inch touch…
This is a proof of concept of a low budget lightweight mouse mod based on the logitech G305 wireless mouse. If you buy a standard logitech G305 this model uses all internals and screws that you will find when taking that mouse apart.…
Edit 22/08/2026 Found and uploaded the, 'flat', version of the battery cage. Thanks to @Galaxy_5255671 for giving me motivation to look for it! Edit 15/2/2026 Added Back V2.1, with a bigger 7mm rear skate land and a much improved side…
Numberplate holder, needed in certain countries together with JREV Rear Fender
Now features accurate holes for mounting to the frame, as well as space to place a DIN 125 washer below the screw. This version is also compatible with a COB LED. Used COB LED: https://a.aliexpress.com/_Ewcz7Qa Compatible with same Lense…
Complete collection of G30 scans
Vzhledově i funčně obdobná náhrada podpažbí pro vduchovou pušku Walther Anatomic LG300
The plastic part of scroll wheel has worn out and became loose, which caused the scroll wheel to not to rotate freely. I designed this model to replace the plastic part. After disassembling the mouse, you need to remove the plastic…
You've probably seen the A1 Mini mystery kits for a printed mouse. I think it's pretty neat that Bambu Lab is including those as there are plenty of others to try as well, like this one. It's an asymmetric shape I made that has design…
hier ein Remix von einem Model, passend für BMW G30. Mit der Halterung ist das Handy nicht zu nahe zu dem Schaltknauf here a remix of a model, suitable for BMW G30. With the holder the phone is not too close to the gear knob
JREV Floor Extension for 16S6P configs
Grip, front cover and stand for the Anbernic RG300 retro gaming handheld. The grip makes longer gaming session more comfortable without blocking buttons, connectors at the bottom of the device or the volume wheel on the side. The front…
Fits original as well as aftermarket fender (I have bought mine locally on Allegro ) Printing Supports required for axle mounts Print on the flat side Use a lot of perimeters
Ninebot SNSC 2.3/2.4 Controller Adapter for G30 Controller
This would'nt be possible without Mouse Shape Tester Megapack , so thanks Scout339 :) I have a small desk and too many mouses, this was a way a find to keep thigs less chaotic
Logitech G305 conversion to G9x geometry. Printed on Elegoo Saturn MSLA using Sirayatech Fast Smoky Black and 10mL of Blu to increase durability. Print should work fine for FDM but will require a lot of support, PETG recommended as a…
Simple remix of the Retro Gaming Handheld Ergonomic Grip by gevo4258 , which slightly adjusts the opening at the bottom so that the grip can be used with the Anbernic RG300 and RG35xx. Can be printed with PLA, but needs support. Mine was…
Front Stem Light, for the JREV Light Environment
Just unscrew the four screws holding the handlebar in the stem and insert the AirTag holder (Incl. the AirTag) in to the stem. The model considers space to run the wire next to the holder. I used a wire wrap to secure the wire with the…
I really like this mouse but after a while in the tropical climate here in Taiwan the rubber degraded so much it started breaking down into a sticky mess. While replacing the microswitches I thought why not fix this as well. You may…
Hit my DMs if you want SLDPRT 2023 file to modify…
This adapter lets you mount the Klickfix holder to a Ninebot G30D II scooter. It might also fit to other variants of the G30. Please leave a comment if you've tried it. Parts needed 4x M5x50 screws 4x M5 self-locking nuts Assembly Drill…
Please leave a ♥ Like if this print was helpful to you :-) This is a "clamp-on" design chain holder for the Ninebot G30D escooter and a max chain width of 3 cm. Holds the lock securely in place when not needed and also makes locking it on…
Hello, It is a copy of the original canopy that I created with FreeCAD (the FreeCAD file is attached). But I designed a specific GPS holder for the Beitian Be-122 on the top instead of the camera mount. This must be printed in PLA with…
Hello everyone, This is a simple model of neck-mounted ABUS Granit 540 U-lock holder for Ninebot Max G30 e-scooter. Hardware required: 6x M5x12 mm bolts 6x M5 nuts Double up to eliminate lock rattle/movement (see photos). Recommended…
In order to make the G305 as light as possible you gotta use the lightest battery you can. Does require removal of stock battery tray which includes the dpi button, but dpi can be changed through the mouse software, plus that's just more…
fits in place of the original flip cover has a hole to fit standard dc jack and there is a file that also has a switch might make a hole for the original DC charging port. this is great for if you want to remove the built in charger to…
GUIDE https://www.instructables.com/Z100s-3D-Printed-Symmetric-Wireless-Mouse-Guide/ VIDEO GUIDE: https://youtu.be/o0P37Avcor0 -60g with AAA. Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable…
Ninebot-G30 20s6p Cellholder – Advanced Assembly Files Cellholder Dimensions: Length: 460 mm Width: 117 mm Height: 13 mm Hole Diameter: 21.4 mm Overview This new version of the Ninebot-G30 20s6p cellholder is designed for advanced…
Wanted to get a feel for how big the G300 is and where I could potentially fit it on my build. Took their dimensional drawing from the website and did a quick mockup of the major components. The “no-divets” model will print with much less…
A very convenient add-on for the awg30 wire frequently used for PCB rework and various bodges. Designed to print quickly. Mine is in recycled PETG. I heated the end tap with the hole with a heat gun and bent a little, so it's slightly…
JREV Ninebot G30 Floor Extension 10mm Fixed locking mechanism between components.
Line 6 G30 Transmitter Pouch
Relleno : 20% Calidad : 0.2 mm sin soportes
If your G305/G304 scroll wheel is rubbing against the shells, the rubber part of the scroll wheel is degraded, you can open up your mouse cut the rubber out and replace it with TPU printed ‘skin’ for your mouse wheel. you can print this…
Contains 2 different floor extension: 15mm outside 12mm inside CNC + TPU Rubber gasket 10mm outside 7mm inside CNC + TPU Rubber gasket Features countersunk screws so they wont get destroyed when bottom out.
A holder for this kind of lock. Warning! Slide-on design! You have to disassemble your scooters handlebar, reflector and brake line!
This is a remix from this model on Thingiverse: https://www.thingiverse.com/thing:3862387/files My remix has a flat bottom, so it's better printable on an fdm printer.
Description: A custom-designed waveguide for matching the depth of the Visaton W170s' origin of sound with the Vifa/Peerless/Tymphany XT25G30-04 ring radiator. The diameter of the WG matches the woofer's. The waveguide should also fit on…
Copper Nickel sheets https://de.aliexpress.com/item/1005005986261829.html Use 0.2mm/0.4mm Nozzle and PETG for the best result. For 0.4mm Users use this
Vorderschafterhöhung um die originale Handauflage des Walther LG300 höher zu legen. Einfach in der benötigten Höhe drucken und mit längeren Schrauben zwischen Schaft und Handauflage montieren. In das vordere Loch kann ein M5 Gewindestift…
This is a replacement axel gear for the Eufy G30 robovac, and other compatible models. If your wheel looks like the photo attached, then the gear should work, the same wheel is used on several models. I've printed this successfully with…