Wyniki wyszukiwania: galileo

Sortowanie

201 modeli

P
PrintablesactualSIZE

Clockwork using Galileo's Escapement

Tick-tock, tick-tock, tick-tock. What lies between the beats of time? Rythme. Satisfying to build, watch and listen. I was having a lot of trouble seeing the proper angles for designing a deadbeat escapement from scratch, so I started to…

Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu

Pobrania
428
Polubienia
130
Ocena
5
P
PrintablesWesPless

PG7 mount for Galileo2

I had to upgrade mount created by Chad Baker - What I did was to create new PG7 screw socket (looks like original had broken thread) also make it bit lower so it is not interfere with cable chain on the back when head is moving on very…

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
169
Polubienia
17
Ocena
0
P
PrintablesWesPless

PG7 Cable mount for Galileo2

I had to design new PG7 mount for my Galileo2 Extruder on my Voron 2.4. I have Galileo extruder with TAP and scrab brus on the end … me previous mount https://www.printables.com/model/877290-pg7-mount-for-galileo2 was working just fine…

Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu

Pobrania
127
Polubienia
22
Ocena
0
P
PrintablesXVIIarcano

GALILEO Modular Microscope

Check the published mods, you may want some of them right from the start! The improved stage movement is ESPECIALLY recommended :) This project is about an affordable, expandable and customizable microscope based around basic hardware, 3d…

Pobrania
1073
Polubienia
967
Ocena
4,71
P
PrintablesAlia5

Galileo 2 (G2E) Filament runout sensor (UPDATED) [Filametrix and ERCF compatible]

Galileo2 (G2E) with filament runout sensor. - ECAS-Fitting compatible. - Step file included. - No change in overall G2E dimensions BOM: 1x Omron D2F microswitch 1x 5mm steel ball bearing (optional) 2x M2x8 self tapping screws (You might…

Pobrania
942
Polubienia
199
Ocena
5
P
PrintablesLoogle

Galileo 2 G2E PUG Umbilical Mount

PUG mount based on hartk's PG7 mount that uses the new standoff mounting location (other PUG mounts hook into the extruder motor threads, which is not recommended). Tested with LDO Nitehawk-SB If you have an SB2209 RP2040 see Ozuwara's…

Pobrania
764
Polubienia
106
Ocena
4,9
P
Printablesmariusbach

G2E (Galileo 2) cover for Canbus PCB (SB2040, SB2209 and similar) and 30x30 (3010 or 3007) fan

In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…

Pobrania
739
Polubienia
92
Ocena
4,8
P
Printableslink0007

Galileo Galilei statue

Statue of Galileo Galilei. Original by Pio Fedi. Found inside the main entrance to the Lanyon building of Queen's University Belfast. About the statue: "A colossal statue in Carrara marble. The celebrated astronomer is represented in the…

Pobrania
644
Polubienia
113
Ocena
5
P
PrintablesArnoldstrife

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief with Spring Steel Cable Guide/support.

Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.

Pobrania
620
Polubienia
62
Ocena
5
P
PrintablesLiselotte111

Galileo 2 cable cover

A cable cover for Galileo 2 with holes for ventilation/cooling a canbus board. I use a Mellow SB2040. Untested for other boards. Will upload photo's soon

Pobrania
605
Polubienia
52
Ocena
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief

Remix to add support for the connector as well.

Pobrania
538
Polubienia
57
Ocena
5
P
Printablesjeronbernal

Galileo 2 3007 SB2209 / SB2240 / SB2040 CAN Bus PCB Fan

A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…

Pobrania
467
Polubienia
79
Ocena
5
P
PrintablesMJ JOO

Galileo 2 2507 Fan Cover for SB2209/SB2240

Maintain a unique style of Stealthburner. No screws reguired.

Pobrania
467
Polubienia
58
Ocena
5
P
PrintablesXVIIarcano

Rack and pinion stage module for Galileo Microscope

This mod addresses some useability downsides with the dual M5 screw movement of the standard module. The independent rack and pinion movement for x and y prevents the binding issue of the two interconnected knobs, and the new gears…

Pobrania
461
Polubienia
134
Ocena
5
P
Printablescjackson234

Galileo 2 (G2E) PUG Umbilical Voron Stealthburner

Merged Hartk's G2E umbilical with the PUG connector

Pobrania
461
Polubienia
52
Ocena
0
P
PrintablesSnympi

Voron Stealth Burner ERCF Galileo Filament Sensor Mod

This is an altered version of my Afterburner Galileo extruder for the new Voron Stealth Burner toolhead. This accommodates a 7mm ball bearing and microswitch to detect filament after the extruder gears as required by the Enraged Rabbit…

Pobrania
449
Polubienia
52
Ocena
0
P

Galileo 2 SB2209 strain relief

Strain relief using a ziptie for Galileo 2 (G2E) extruder and SB2209 or SB2240 canbus board.

Pobrania
439
Polubienia
48
Ocena
4
P
PrintablesJoseph

Galileo 2 Extruder

Customized Galileo 2 Extruder, light weight & filament detection

Pobrania
437
Polubienia
209
Ocena
5
P
PrintablesJR Lomas

EBB36 Galileo 2 Standalone Mount

EBB36 mount for Galileo 2 standalone extruders

Pobrania
394
Polubienia
46
Ocena
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 30MM Fan Mount Cable Cover

Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.

Pobrania
375
Polubienia
45
Ocena
5
P
PrintablesToxicMoonCake

Gamesir G8 Galileo Mod V2

a revised version from the first i made. small improvements and in easier files to print. used with M3 screw inserts. Fits ipad pro 11". but u can cut it down to fit smaller screens.

Pobrania
362
Polubienia
17
Ocena
5
P
PrintablesChad Baker

Galileo 2 (G2E) Release 1.0 - LP-12 PG7 Umbilical & 3DO Nozzle Camera Mount

UPDATED 4/13/2024 to comply with G2E Release 1.0 This is a combined version of Baze_24616 & hartk PG7 Umbilical for use with CNlinko LP-12 8-pin connector and a mounting location for 3DO Nozzle Camera Board. STEP file included.

Pobrania
339
Polubienia
43
Ocena
5
P
PrintablesPetr Kašpar

Galileo 2 extruder with two sensors - before and after extruder for ERCF

NOT TESTED, WAITING FOR PARTS !! ONLY FOR TESTING !! now I'm editing for Filametrix mod… Sensor before extruder - only click Sensor after extruder - screwed For assembly: 2x sensor D2F-5 2x ball 5,5mm 2x tapping screw M2x10

Pobrania
330
Polubienia
73
Ocena
0
P
PrintablesGusk

Galileo 2 EBB SB2209 Cable Gland Mount + Lid

All the models I could find that used " PG Cable Gland M12 " for the SB 2240/2209 CANBus cable and worked with the Galileo 2 Extruder didn't work as expected. Some had a design flaw that caused more stress on the cable than relief; others…

Pobrania
314
Polubienia
32
Ocena
5
P
PrintablesIconic FAB

Galileo 2 + LDO Nitehawk SB USB cable strain relief / cable gland

About Galileo 2 + LDO Nitehawk SB USB cable strain relief / cable gland Not a biggest fan of PG-7 cable glands (like me) and willing to make safe and secure LDO Nitehawk-SB USB cable strain relief using Galileo 2 Extruder ? This one is…

Pobrania
306
Polubienia
66
Ocena
5
P
Printablesphlab

Galileo 2 BTT EBB36 Mount for Stealthburner Version 2

A mount for the EBB36 to mount the can board on the back on the Galileo 2 extruder. Version 2

Pobrania
303
Polubienia
26
Ocena
5
P
PrintablesIxian
Pobrania
279
Polubienia
30
Ocena
5
P
PrintablesChad Baker

Galileo 2 G2E EBB SB2209/SB2240 Cover 25x25x7mm_Fan (Updated to Release 1.0)

This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…

Pobrania
258
Polubienia
32
Ocena
5
P
PrintablesXVIIarcano

Revolving objective selector (turret) for Galileo Microscope

This accessory replaces the standard single objective nut with a three positions rotating turret. This way you can "zoom in" or "zoom out" selecting a different magnification objective. Bill of Materials One set of printed parts, printed…

Pobrania
256
Polubienia
64
Ocena
4,67
P
Printablesmorp

Voron Stealthburner Galileo EBB36 Side Mount

I didn't feel like removing my cable chains or worrying about Z chain clearance, so I made this side mount for the BigTreeTech EBB36 CAN board that fits on the galileo extruder . Print in orientations provided. You'll need three m3 heat…

Pobrania
232
Polubienia
35
Ocena
5
P
PrintablesSnympi

Voron Afterburner ERCF Galileo Filament Sensor Mod

This version of the Afterburner Galileo extruder accommodates a 7mm ball bearing and microswitch to detect filament after the extruder gears as required by the Enraged Rabbit Carrot Feeder as a filament sensor. Can be printed in ABS+ or…

Pobrania
226
Polubienia
27
Ocena
0
P
PrintablesXVIIarcano

DEPRECATED - Fine focusing spider for Galileo microscope

DEPRECATED! User @morpion on discord came up with a simpler and more practical idea which is currently published on github here: https://github.com/XVIIarcano/Galileo-Microscope/tree/main/Mods%2FOptical%2FAccessorized%20focus%20knob If…

Pobrania
207
Polubienia
61
Ocena
0
P
PrintablesMalakai

Voron Galileo 2 Extruder - PG11 Cable Gland Motor Adapter

Sometimes you need a larger cable gland than the PG7/M12 version everyone uses. If your using a premade CAN cable and do not want to repin or cut your cable then this is for you. PG11 is just slightly too small for the LDO Nitehawk Cable.…

Pobrania
204
Polubienia
30
Ocena
0
P
PrintablesMadMango

Galileo's Globe Puzzle

If you like the design, support is much appreciated (: buymeacoffee.com/MadMango __________ GALILEO'S GLOBE I have seen the wooden version of this 3D puzzle before and enjoyed it so much, that I've decided to create 3D printable version…

Pobrania
196
Polubienia
44
Ocena
5
P
Printablesarnaud S

Galileo 2 Bigtreetech EBB SB2209 USB

The EBB card with its USB socket on the front does not allow assembly with the standard body of the Galileo 2. The pcb displayed is that of a classic SB type CAN card. The EBB SB2209 USB card not having been modeled by Bigtreetech, I did…

Pobrania
195
Polubienia
25
Ocena
0
P
Printablescuiviemen

Galileo 2 SA extruder for EVA3

Galileo 2 SA (StandAlone) https://github.com/JaredC01/Galileo2/tree/main/galileo2_standalone drive component for EVA3 toolhead. The G2SA is still in beta so there is posibility that when changed the component will change too. To be used…

Pobrania
194
Polubienia
38
Ocena
5
P
PrintablesMarci

Galileo 2 Extruder Cable Chain Arm for Siboor Trident June

Use the F623ZZ bearings from the original siboor cable chain swivel, an m3 heat set and a M3x16 BHCS. Placing the heatset can be a bit tricky, be careful not to damage the swivel. Print orientation as in the .stl, Voron standard settings.…

Pobrania
192
Polubienia
32
Ocena
5
P
PrintablesEsoterical

Galileo 2 EBB36/NH36 PUG Mount

A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 extruder. The original PUG download page (for the gland itself) is at…

Pobrania
191
Polubienia
24
Ocena
5
P
PrintablesDaTTcz

Voron Galileo 2 Extruder - front_body_ECAS_coupler - 2x filament runout sensor+filametrix mod (v7) + cable cover

Modifikace dílu Voron Galileo 2 Extruder - front_body_ECAS_coupler Runout sensor -5mm ocelová kulička a mikrospínač, mechanické provedení nemá problém s průhlednosti vlákna. v2 - přepracováno, přidáno zúžení pro lepší vedení filamentu. v3…

Pobrania
184
Polubienia
31
Ocena
2,5
P
Printablesdeadlydayne

Voron Galileo PG7 mount for EBB2209/SB2240

This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…

Pobrania
181
Polubienia
17
Ocena
0
P
PrintablesSemperDiscere

BTT EBB36 Strain Relief for Galileo Extruder

So… I printed the original and it was an exact mirror of what the Galileo Extruder needed to be. The threads are for PG7 (M12.3x1.25) but may work for a nylon M12 (M12x1.25) Cable Gland. Depends on your filament shrinkage and slicer…

Pobrania
178
Polubienia
17
Ocena
5
P
Printablesyonkiman

Galileo 2 Extruder PG7 Mount (repaired)

The original "G2E PG7 Mount SB2040 3010 V1.5.stl" was not a single, solid design - parts of it were floating. I made some small tweaks to the Fusion 360 file (included) to make it a single, printable piece.

Pobrania
178
Polubienia
16
Ocena
0
P
PrintablesXVIIarcano

Base with drawers for Galileo microscope

This mod only replaces the design of the base module adding some internal space, screws for the rubber feet and for locking the pipes are unchanged froom the standard version. You will need: - One set of printed parts, printed using the…

Pobrania
177
Polubienia
53
Ocena
0
P
PrintablesBadMouth

Galileo 2 Dragon Burner

THIS WAS HACKED TOGETHER IN TINKERCAD SO THERE IS NO CAD FILE TO SHARE. Don't want to get too far into unrelated info, but I restyled these for a more complicated custom project and they came out too nice not to share. So I spent a little…

Pobrania
176
Polubienia
41
Ocena
0
P
Printables5akura1

Galileo 2SA with 2 Filament sensor

add for ercf, Only modify the main body Additional: 3x4x5 brass nuts X2, M3x4 0.4mm flat head screws X2, PCB

Pobrania
167
Polubienia
32
Ocena
5
P
PrintablesAileoze

Galileo 2 Cable Cover With 3010 Blower Fan

I was getting high temperatures (over 85C) on my EBB SB2209 RP2040 board. Running the toolhead without the cover on didn't seem to help so I added a fan to the cover. I only had 3010 blower fans to hand so I made this as an alternative to…

Pobrania
163
Polubienia
32
Ocena
5
P
Printablessalbang

Galileo 2 Bigtreetech EBB SB2209 USB Front Body and Cover

The left side guard of the front body is removed for the pin clearance. Attached a vented cover to be used together with the body.

Pobrania
162
Polubienia
14
Ocena
0
P
Printablestidklaas

Galileo 2 SB2209/SB2240 CAN bus Umbilical Mount

Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…

Pobrania
162
Polubienia
19
Ocena
0
P
PrintablesApollo1298

Galileo 2 G2E Umbilical Cable Relief Mount Compatible with BTT EBB SB2209 USB

I found the existing options for cable relief of the BTT EBB SB2209 USB were lacking in one way or another. So I made my own. My goals: Relieve strain on the umbilical cable. Compatible with the PUG system. Allow greater access to the…

Pobrania
158
Polubienia
27
Ocena
0
P
PrintablesGateIron, LLC

Galileo 2 w/EBB SB2209 Inline PG07 Cable Support, CAN Bus - PG7 Gland

This PG07 type cable support is intended to be super lightweight, so is thin and requires a strong filament with good layer adhesion for best results. I've had no trouble with ABS, but others report some cases of breaking along layer…

Pobrania
156
Polubienia
22
Ocena
4
P
Printablesphlab

Galileo 2 BTT EBB36 Mount for Stealthburner

Couldnt find a correct mount for the EBB36 on G2 with Stealthburner, this is Gen 1, will revise after a little testing. Mounts onto the hex spacers on the G2.

Pobrania
154
Polubienia
18
Ocena
0
P
PrintablesLGraak

Stealthbuner Galileo 2 Cable Cover for LDO Nitehawk-SB

Cable and board cover, for the Galileo 2 extruder for the Nitehawk - SB.

Pobrania
152
Polubienia
24
Ocena
0
P
PrintablesRondo

(Stock Stealthburner Compatible) Galileo 2 D2HW-C201H Filament Sensor + FilamATrix Support + EBB USB Support

See the FilamATrix Github for additional info and other needed modded parts (includes parts to support the EBB SB2209 USB board). See the EBB SB2209 USB GitHub for additional info and other needed modded parts if not using the FilamATrix…

Pobrania
148
Polubienia
41
Ocena
4,67
P
PrintablesDemond

Galileo 2 BTT sb2209 usb

this is a modified version of the Galileo 2 extruder front that allows the use of the bigtreetech sb2209 usb board. The original prevented the board to fit so I have adjusted a few areas to enable the board to sit correctly.

Pobrania
147
Polubienia
16
Ocena
5
P
PrintablesEnderman Prints

PG7 mount for Galileo 2 Extruder

Replaces cablechain with PG7 gland for umbilical. Most other mounts infere with Z-cablechain. This mounts cable gland on the side of extruder motor, using minimal amoun of valuable Y dimension. No need to remove Z-chain. As sturdy mount…

Pobrania
145
Polubienia
15
Ocena
0
P
PrintablesChase

Galileo2 Cable Cover with 4010 Fan

4 Different Models -With or Without Vents- -With or Without M3 Heat Set Insert Holes-

Pobrania
142
Polubienia
24
Ocena
5
P
PrintablesCrazyCreator

BLV Afterburner Voron Remix - Afterburner Galileo Clockwork

A remix from the great Afterburner Galileo Clockwork /EDIT In the files you will also find a variant for assembling an original Orbiter Extruder, so you don't have to print the printed parts that depict the Orbiter, but only what is…

Pobrania
140
Polubienia
19
Ocena
0
P
PrintablesDIVIIK

Galileo Navigation Satellite Model

A remix from dominic_97 Category: 3D Printing

Pobrania
137
Polubienia
18
Ocena
5
P
PrintablesGateIron, LLC

3010 / 3007 Fan Cable Cover for Galileo 2

I believe this design avoids some of the issues that are present in other Galileo 2 compatible board-fan mods. Features of this one are: True to Original: Started with JaredC01's official CAD file, and attempted to make the fewest,…

Pobrania
137
Polubienia
16
Ocena
5
P
PrintablesPhil

Voron Galileo 2 cable cover hexagon skeletonized with chamber thermistor clip

A remix of Liselotte111's hexagon door cover with an added 3mm thermistor clip for the chamber temperature.

Pobrania
135
Polubienia
17
Ocena
0
P
PrintablesJulien Mairy

Galileo Galilei – Bust (Galilée)

Galileo Galilei – Buste 🇫🇷 Description (Français) Ce buste représente Galilée ( Galileo Galilei , 1564–1642), astronome, physicien et mathématicien italien, figure fondatrice de la science moderne. La sculpture est inspirée du portrait le…

Pobrania
134
Polubienia
17
Ocena
5
P
Printablesmuf83

PUG Mount for G2E (Galileo 2) Compatible with BTT SB2209 CAN

A very simplistic pug mount for g2e working with btt sb2209 can

Pobrania
132
Polubienia
16
Ocena
5
P
PrintablesDazza

U.S.S. Enterprise Galileo shuttlecraft Star Trek Strange New Worlds.

Step Aboard the Galileo Prepare to launch with this model of the Galileo shuttlecraft, an iconic auxiliary vessel stationed aboard the U.S.S. Enterprise in Star Trek: Strange New Worlds. Bridging the gap between 1960s retro-futurism and…

Pobrania
132
Polubienia
19
Ocena
5
P
PrintablesGZaxisoffset

Galileo 2 Simple Umbilical for Stealthburner

Are you a peasant but want to take the shiny new Galileo 2 for a test drive on your bed slinger? Ziptie hole: approx 5mm x 1.5mm

Pobrania
131
Polubienia
15
Ocena
0
P
PrintablesNozzle Wizard

Galileo2 BTT EBB SB2209 USB V1.0 Cable Strain Relief Support

To get the SB2209 USB to fit my Galileo2, I de-soldered the I2C connector and it fits perfectly. The cap-head bolt in this is M3x40, so you don't have to find an impossible M3x50. It has a zip-tie routed slot as well as steel cable mounts.

Pobrania
127
Polubienia
9
Ocena
0
P
PrintablesAxel

Toolhead Sensor for ERCF Galileo2 Jared01 (G2E), Stealthburner

the support can be easily removed M6, M10 and ECAS Coupler

Pobrania
122
Polubienia
25
Ocena
0
P
Printablesdohmian

Stealthburner EBB 2240_2209 Cable Cover with 3007 Fan for Galileo Extruder

BTT modified the Stealthburner Cable Cover for use with their EBB 2240_2209 Board. My board gets 85°C hot when printing. Therefore I took the redesigned cover from BTT and the remixed version from Sven Kah and made a remix to fit the…

Pobrania
120
Polubienia
12
Ocena
5
P
Printablesjeronbernal

Galileo 2 SB PCB CNLinko M12 Z Chain Safe Strain Relief

SB PCB/Galileo2 Strain relief mount zip tie locations that sit flush with the mount use CNLINKO M12 quick disconnect or M12 strain relief

Pobrania
117
Polubienia
18
Ocena
4
P
PrintablesKaybee

Voron Stealthburner Cable Cover with Thermistor Mount for LDO Nighthawk and Galileo 2

This is a modified cable cover that allows you to mount the chamber thermistor for the LDO tool head PCB to the cable cover of the Galileo 2 extruder on your Stealthburner tool head. This is a remix of both the LDO Nighthawk cable cover…

Pobrania
112
Polubienia
9
Ocena
5

Orbiter V2 / Galileo 2 Printhead for Kingroon KP3S 3.0

Hardware: 5015 fan mount: 2x M3x20mm + washers 5015 duct mount: 1x M3x8mm or 10mm 5015 duct to the main bracket: 3x M3x8mm Hotend duct mount: 1x M3x8mm Endstop: 2x M3x8mm Main bracket to rail: 4x M3x12mm + spring washers + wide washers V6…

Pobrania
111
Polubienia
26
Ocena
0
P
PrintablesToXIc

CAN Cable PG7 holder for Galileo2 BTT SB2240 Stealthburner

CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209

Pobrania
110
Polubienia
17
Ocena
5
P
PrintablesJames Wilkinson

Galileo Galilei Board Game Insert/Organizer

An insert for Galileo Galilei with bins to put right on the table. V2 Out now: Support for sleeved cards of 73x122mm ( https://boardgamegeek.com/boardgame/393333/galileo-galilei/sleeves ) scale up 1mm the cards if you use 73x122 unless…

Pobrania
104
Polubienia
11
Ocena
5
P
PrintablesPanchodelis

Voron Trident Horizontal Umbilical Chain for A4T with Galileo2 and Orbiter – RTO Edition V2.1

https://www.youtube.com/watch?v=ime0QRmLQDA This mod was designed and optimized specifically for the following configuration: Toolhead: A4T Carriage: XOL Extruders: Galileo 2 (WWG2) A beta version of the mount for Orbiter extruders is…

Pobrania
104
Polubienia
34
Ocena
0
P
Printableskris boats
Pobrania
104
Polubienia
6
Ocena
0

Galileo 2 G2E PUG Umbilical Mount (support to SB2209 usb connection)

This remix was made to allow usb connection with BTT SB2209 toolhead board as the original model blocks the USB input. PUG Clamp and Bottom Standoff parts as exactly the same of the original model, but I provided them here for…

Pobrania
100
Polubienia
22
Ocena
0
P
PrintablesSpicyLimes

Star Trek TOS - Shuttlecraft Galileo

I purchased a Golf Cart a few months ago, and because I am a Trekkie at heart, I had to give it a name. After many discussions, and arguments, I settled on using the Shuttlecraft Galileo from Star Trek: The Original Series. While the 3D…

Pobrania
100
Polubienia
12
Ocena
0
P
PrintablesAxel
Pobrania
97
Polubienia
16
Ocena
0
P
PrintablesPeter Graaf

galileo 2 ebb36 mount with pg7

i needed a mount for galileo 2 with ebb36 and pg7 so i mashed these two models together. havent tested it yet

Pobrania
97
Polubienia
12
Ocena
0
P
Printables5akura1

G2SA Galileo 2 Filament sensor

G2SA Galileo 2 Filament sensor based on 5.5mm ball bearings

Pobrania
92
Polubienia
19
Ocena
0
P
PrintablesAbsak

Galileo 2 Filament sensor D2HW-C201H

Galileo 2 Remix with Pre-Extruder Gear Filament Sensor For the most up to date version of this mod please visit Github . Description: This is a remix of the Galileo 2 extruder by JaredC01, designed to integrate a pre-extruder gear…

Pobrania
90
Polubienia
28
Ocena
5
P
PrintablesRobin

Gamesir g8 + plus galileo mod for usb c dongle

I just wanted a way to get low-latency audio on my GameSir G8+ and couldn’t find anything online, so I created this myself. It holds my Galaxy Tab S9 without any issues, and I designed it so it should work with different tablets and…

Pobrania
89
Polubienia
7
Ocena
0
P
PrintablesMarkM

PG7 mount for Galileo 2 Extruder with wire slot for BTT CANBUS cable

This is a great PG7 mount that worked well with my BTT SB2209 RP2040 board since it it out of the way from the connector, however I'm also using the BTT CANBUS cable (the one with the pre-molded XT60+2 connector on it) and there was no…

Pobrania
88
Polubienia
5
Ocena
5
P
Printablesfulippo

Galileo 2 - PG7 Strain Relief

Another PG7 Strain Relief to use for umbilical based on https://www.printables.com/model/1077552-pg7-mou by Enderman Prints. This remix changes the position of the PG7 thread making it more central. The hole is open and allows to use an…

Pobrania
88
Polubienia
16
Ocena
0
P
PrintablesSchmitty

Galileo EBB Canbus cable relief

After adding the EBB RP2040 and Galileo mods… I was having issues with the canbus cable failing due to internal conductors breaking where the cable transitions to the plug, after many hours of printing. Tried other cable relief solutions…

Pobrania
88
Polubienia
10
Ocena
5
P
PrintablesPawel Lygan

Galileo 2 EBB SB2209 USB strain relief cable holder

The project has been adjusted to the EBB SB2209 USB board. Please use an empty PH connector (you should have spares anyway, delivered with a board) to isolate the piano wire from the port. Piano wire available on amazon My 3d design…

Pobrania
83
Polubienia
10
Ocena
0
P
PrintablesBaze

Galileo 2 (G2E) LP-12 Umbilical & 3DO Nozzle Camera Mount

This is a version of hartk PG7 Umbilical for use with CNlinko LP-12 connector and a mounting location for 3DO Nozzle Camera Board.

Pobrania
83
Polubienia
11
Ocena
0
P
Printablesterrakuh

Galileo 2 extruder + MMU filament sensor

This modification of G2E for the Stealthburner has an additional filament detection sensor after the extruder. I have designed this, as other designed didn't seem to be as reliable with my setup. The additional PTFE stickout from my…

Pobrania
83
Polubienia
23
Ocena
0
P
PrintablesLarryD

LED Light for GALILEO Modular Microscope

Designed this LED light to slide into the phone illumination module for the GALILEO Modular Microscope. All of the parts were printed in Hatchbox PLA with the exception of the strain relief grommet which is PETG. Note that the grommet…

Pobrania
78
Polubienia
30
Ocena
0
P
PrintablesDanAndersen

plant pots for kids greenhouse (Clementoni Serra). Zusatztöpfe Kinder Gewächshaus Galileo Nature Clementoni

My Kids have a small greenhouse made for Galileo Nature (ProSieben) by Clementoni, which was in need for additional plant pots. So, I designed two different pots for additional places in the greenhouse. In German: Das von Galileo Nature…

Pobrania
77
Polubienia
35
Ocena
0
P
PrintablesBaGooN

Voron 0.2 Umbilical PCB Mount for Galileo 2

This PCB Mount can be used with both the Galileo 2 Standalone (G2SA) Orbiter mount version and the Sherpa-MINI mount version. Required parts for mounting PCB: 2x M3x5x4mm heat-set Inserts 2x M3x6mm Print Settings: Material: ASA Layer…

Pobrania
77
Polubienia
16
Ocena
5
P
PrintablesSundee

Galileo2 D2HW for FilamATrix / Filametrix

I couldn't find a compatible one, and the normal G2 dual sensor one was unreliable, D2HW are just better in every account. This is a bond of 2 designs, certainly not my hard work: https://github.com/Ntrondle/Galileo2_D2HW for the sensor…

Pobrania
75
Polubienia
20
Ocena
0
P
PrintablesKifo

Galileo2 Extruder Cover Hex with Fan

Fits a 3010 fan (specifically this one - https://www.amazon.com/gp/product/B07KRT8TRB ) with a hex work design V2 tucks the front back to be more in-line with the rest of the toolhead.

Pobrania
74
Polubienia
11
Ocena
0
P
Printablesatom

EBB42 / xxx42 CAN Bus Board Mount for Galileo 2 Extruder

A mount to use an EBB42-style square toolhead board with the Galileo 2 extruder on the Voron Stealthburner. Compatible with original G2E parts and the original CB-G2 cable gland mount. I've included a modified cable gland mount with…

Pobrania
72
Polubienia
16
Ocena
0
P
Printables3DSolver

Galileo 2 (G2E) chain mount

Galileo G2E chain mount for SIBOOR June 2024 trident kit. The Galileo mounting depth is greater than that of the standard SB. It is not compatible with mounting motors on top of the portal.

Pobrania
70
Polubienia
8
Ocena
0

Meowburner Ears for Galileo 2 Extruder

Edit: I put the ears in the incorrect direction. This has been fixed. A quick and dirty remix of the Galileo 2 Extruder for the Voron Stealthburner, available at available at https://github.com/JaredC01/Galileo2. I basically just took…

Pobrania
70
Polubienia
16
Ocena
0
P
PrintablesStefan Jenisch

PG7 Mount for Voron 2.4/Stealthburner with Galileo 2 Extruder

I needed a PG7 Mount for my Voron 2.4 Formbot Kit which came with an umbilical setup. Since I feared that the sharp endings of the piano wire would scratch through the isolation of the canbus cable when used on its own I decided to put…

Pobrania
69
Polubienia
5
Ocena
0
P
PrintablesOzuwara

Galileo 2 G2E PUG Umbilical Mount (sb2209)

Didn't like the other alternatives, so I made my own modifications to the design to accommodate the protruding USB-C port on sb2209 (rp2040). The only modified part is the mount. All other files are unchanged from the original.

Pobrania
69
Polubienia
10
Ocena
0
P
PrintablesBlindiak

Galileo Project Insert

Insert ok for sleeved card

Pobrania
69
Polubienia
7
Ocena
5
P
PrintablesS S

Galileo 2 stealthburner umbilical mount for CAN Cable and steel wire

Galileo 2 stealthburner umbilical mount for CAN Cable and steel wire mounted on standard 2 hole cable_chain. https://github.com/JaredC01/Galileo2/blob/main/galileo2_extruder/stl/cable_chain_2_hole.stl

Pobrania
62
Polubienia
9
Ocena
0
P
PrintablesWolffy01

Galileo2 Twinsored meow G2E

G2E cat hears usable whith filametrix Twin sensor 5.5 ball

Pobrania
60
Polubienia
13
Ocena
0