8561 modeli
************************ UPDATE 7th February 2023 ************************ Due to requests from some people who have made the Awesome Bee Feeder I have now updated the design to have the bottle holder and base plate combined as one item.…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
---- Grenade MK2 WW2 ---- UPDATE: Small update to the "Head" see "Head_v2". The "Head_v2" version will now slice/print better on the two flanges. Tried to make a Grenade, and as a reference I used the American MK2 fragmentation grenade…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
John Stewarts Ring from the up coming Green Lanterns HBO series. Not 100% accurate as only based on one shot from the teaser trailer.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Before you read any further, take a look at the new version of this puzzle: printables.com/model/72524 The goal of the puzzle is to stow the green stone with the other stones in the box. I have always made small improvements to this game,…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
This was an experiment using an AI 3D model generator called meshy.ai The results were pretty neat! Not the highest resolution, or cleanest, and I had to make sure the bottom was flat for the print bed, but for a free model generator…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
What we know about Egypt's ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller…
Wydruk około 10,06 €–12,30 € nettoWstępna wycena jednego wariantu
This is a drill guide to aid in 90 deg and 45 deg drilling. Diamond cutouts are on either end to aid in finding measurement lines. The 45 deg guide will intersect at the the center line. All holes accommodate imperial bits. Please be safe…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…
Wydruk około 6,68 €–8,16 € nettoWstępna wycena jednego wariantu
Greek Goddess Bust
Wydruk około 10,00 €–12,22 € nettoWstępna wycena jednego wariantu
Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stripe From Gremlins. With or without base.
Wydruk około 13,31 €–16,27 € nettoWstępna wycena jednego wariantu
I found this model at MyMiniFactory and modified it for easier printing. I also added a stand and made a fuse out of wire and a key ring. For better details, use the variable height layer on the Impact Grenade button part as you can see…
Wydruk około 6,24 €–7,63 € nettoWstępna wycena jednego wariantu
Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The fence size is the same as Timo's, but allows cutting at -45, 45 degree angle. In addition: Added .1 mm to fit more easily Add lock mechanism with 2 M3nS nuts and 2 M3x14 bolt (from the MK3S+ Fasteners spare bag) to lock the track. The…
Wydruk około 11,52 €–14,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made for 38mm diameter tealights. Standard print settings. If you like the design. Check out this salt bowl: https://www.printables.com/model/1135479-greek-pillar-table-salt-bowl-with-spoon
Wydruk około 5,68 €–6,94 € nettoWstępna wycena jednego wariantu
A replacement straw for “Great Stuff” spray foam canisters. If you're like me, you have many small jobs, but after one use, the straw becomes clogged and unusable. With this model you can print your own and reuse a partially spent can…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
German Kugel Grenade Model 1913 (11/18/2024) Added grenadeandpin2.3mf and its corresponding G-code -Took 3dbob's advice and added about 1% to the x and y on just the Grenade body. Should help with a better pin fitting and ease of screwing…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena jednego wariantu
Philipoemen - Greek General Fixed 1/31/2024 - removed old files. Philopoemen /ˌfɪləˈpiːmən/ ( Greek : Φιλοποίμην Philopoímēn ; 253 BC, Megalopolis – 183 BC, Messene ) was a skilled Greek general and statesman, who was Achaean strategos on…
Wydruk około 12,93 €–15,80 € nettoWstępna wycena jednego wariantu
This is a straightforward print that looks good with a range of layer heights, but supports are required. My preferred printing orientation is with the greyhound logo facing up, and supports underneath the handle. Alternatively, you can…
Wydruk około 6,24 €–7,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my remix of Linear Bearing Greasing Cap by walter to fit on small 12g tube of Super Lube. It is only for LM8UU (8mm) bearings. You have to cut off the tip of the tube just above the thread like I did (check pictures). I have…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
My Thermomix "Teigretter" helps for easier dough removal on the Vorwerk Thermomix TM5/TM6. It is loosely based on the “Teigling” model made by DonBorste but completely drawn by myself - see…
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
***THIS IS VERY EXPERIMENTAL! I TAKE NO GARANTEE FOR WHATEVER HAPPENS!*** There are 3 different shapes: round, square and hex. Round works best, but square and hex are also nice… How to do it for the round shape : - open model in…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
A general purpose hook for Harmony greenhouse (and others) for insertion into aluminum rail. Attach a string to the hook, attach the other end and let it help your plants You may use a plier to turn the hook into position.…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This adapter allows the nozzle to be angled at 60 degree for Xiaomi Mi Vacuum Cleaner. Print Settings: Material: PETG Layer height: 0.26mm Supports: No My Other Xiaomi Mi Vacuum Cleaner's Accessory Holder -…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pendientes inspirados en la Antigua Grecia. Impreso con una Clearty Ender 3 v2 y diseñado en fusion 360º. Material utilizado, PLA, PARAMETROS DE IMPRESIÓN STANDAR QUALITY. Temperatura del nozzle 195º. Cama con 3DLACA, NO USO TEMPERATURA…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is an easy-to-print Synthesizer Stand angled at 45 degrees. I am using it for several synthesizers at 100 percent and 85 percent. I print up the first batch of four and am now printing another four. Will support Synths or mixers up…
Wydruk około 20,80 €–25,42 € nettoWstępna wycena jednego wariantu
Dragon Decoration / Filigree
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter). I've only kept the holes needed for our door to improve structural integrity. However, this can be easily custimized in the OpenScad Code ( splintDiameter ).…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Plate Caution 3D printing 200x200 mm in three colors, gcode PTEG and PLA is in progress.
Wydruk około 5,25 €–6,42 € nettoWstępna wycena jednego wariantu
NOTE: You find the new and improved version 2 here: https://www.printables.com/de/model/326872-air-traffic-controller-board-v2 Warning: The 60 degrees base seems to be misaligned, I'll remove this message when I've fixed this! Update…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
I had bunch of CRC grease tubes in garage, and wanted to design LM8UU bearing greaser nozzle with caps, so you can keep them even in your home office drawer without cleaning them. Nozzle screws into 100 ml CRC grease tube. Top cap seals…
Wydruk około 1,21 €–1,47 € nettoWstępna wycena jednego wariantu
The 15 degree shim that comes with the Eufy 2k wired video doorbell isn't enough to get a good view at a right angle from the wall the doorbell is mounted on. This 35 degree shim gives a perfect angled view. Print instructions Since this…
Wydruk około 0,90 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Infos: tolerances between parts: 0,2mm Insert the magnets at the right position and orientation so they pull each other used magnets (5x2mm) since V3:…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
El Chombo : Dancing Green Alien
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter to connect a Dewalt DWS715 Miter Saw (42mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose with a 90 degree elbow, created in Fusion 360.
Wydruk około 6,72 €–8,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I couldn't find a solid,…
Wydruk około 3,78 €–4,62 € nettoWstępna wycena jednego wariantu
Grey's Anatomy "It's a beautiful day to save lives"- Derek Sheperd
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
The cuff bracelet was intended to be printed with Matterhackers Quantum iridescent filament, which displays different colors on different sides of the print. That allows the rotating beads different colors in different orientations. It…
Wydruk około 3,85 €–4,71 € nettoWstępna wycena jednego wariantu
Grey Rhebok : Antelope Skull
Wydruk około 13,86 €–16,95 € nettoWstępna wycena jednego wariantu
Greek Oil Alabaster Jar. Often used to hold perfumed oils that were used after bathing. Motif shows Egyptian stylizations.
Wydruk około 16,10 €–19,68 € nettoWstępna wycena jednego wariantu
Bartmannkrug : Beard Man Mug Bartmann jugs were very popular, not only in Germany, but also abroad in the 16th and 17th centuries. They even reached the New World.
Wydruk około 17,76 €–21,70 € nettoWstępna wycena jednego wariantu
I have seen several of these online but they don't fit my MK3S or they are really flimsy. I redesigned the idea to make it solid and fit the printer WITH THE ORIGINAL BOLTS INTACT. The prusa original cover ignores the bottom of the bed…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zum greifen von Zigarettenhülsen
Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Chaveiro do Grêmio para imprimir com as 3 cores na mesma camada Ao abrir o arquivo na primeira mensagem no prusa colocar “Não” e na segunda “Sim” Abrir a aba do prusa em “Config. da Impressora” e “Geral” e adicionar 3 extrusoras com as…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
This model shows the white matter of the human cerebral cortex in the right hemisphere, with the grey matter included as well in the left hemisphere. Also shown in this model are the white matter tracts that cross between the hemispheres…
Wydruk około 12,35 €–15,09 € nettoWstępna wycena jednego wariantu
We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…
Wydruk około 6,37 €–7,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zum Finden der richtigen Position meiner Ra12-Zeichen hilft diese Bohrschablone. Sie funktioniert mit “normalen” Spur N Modellbahngleisen (z.B. Minitrix) und durch die drehbaren Flügel ist sie unabhängig vom Weichenwinkel oder dem…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Sofa with secret compartment to store banknotes, gift card, credit card, keys or other. I made it for a gift to a friend of mine who needed a sofa. Not being able to afford a full-size sofa, I made this one in 1:12 scale with a secret…
Wydruk około 10,11 €–12,36 € nettoWstępna wycena jednego wariantu
This is a Grey Birch La Chassis Rear Bag Rider. Mounted with (3) bolts, (2) on upper leg and (1) on the bottom. The bottom bolt is not required but adds a lot of stability. If you use the bottom bolt you will have to drill and tap the…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Little Green Army Women : Star Wars : Andor : Dedra Meero
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
Easy to print plant holder. Insert the plant holder into the aluminum profile of your greenhouse and attach any string or wire. Printing Instructions No supports needed.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Finder Tool with 0 - 180 Degrees Angle Set Square 200mm & 8inch or Set Square 20cm & 8inch or Set Square 20cm Protractor Angle Ruler 180 Allow Screw: 1 x Nut M5 1 x Cap Head M5X20mm Filament: PLA, PETG, ASA & ABS Thank you ;-)
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Joelbot the Grey – Hero Ready for Action! Hey maker! 👋 Every hero deserves the right gear – and in this modern harsh world, that means a magic staff … and the matching hat ! Features: Fully designed hero figure with staff and hat. Tested…
Wydruk około 5,69 €–6,95 € nettoWstępna wycena jednego wariantu
This is an adapter, to use a pole with cone threaded connector (as e.g. the Vileda ones) with the M24 connection mops, commonly used in Greece. It is a combination of the “ Vileda Mop rod, Coned Thread Connector” designed by Skaran (…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Saint Volodymyr the Great: Quick Facts Name: Saint Volodymyr the Great (also known as Volodymyr I Sviatoslavych or Vladimir I Sviatoslavich) [cite: 2.1.1]. Lifespan: Born circa 958; died July 15, 1015 [cite: 2.1.1]. Titles: Prince of…
Wydruk około 13,11 €–16,02 € nettoWstępna wycena jednego wariantu
neodymium magnet 60*10*3mm 8pcs The magnet I bought was slightly smaller than spec and I put thin painter tape on each side to fit in square cavity. These magnets can connect with frames or Q11 directly and steady. rubber foot 24 pcs…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
I printed this in PETG on my Prusa Mini+ with 0.25mm layer height and 4 perimeters. The wedge is a bit shorter than the keypad so it would fit on my small print bed. You could easily extend it but it works well as it is.
Wydruk około 9,14 €–11,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Sanding Block is useful for sanding inner Corners (example Picture Frames). The Lower screw will fix the sanding paper, the upper Screw will tension the Sanding paper. Cut your Sanding Paper into 50mm x 170mm stripes. Printed in PLA…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
None of the existing wedges for the G4 doorbell fit my needs, so i made one that did. This wedge puts the doorbell at 90 degrees to the door for doorbells that are mounted perpendicular to the door. I didn't trust the snap-on mounting to…
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
Printed using ePLA. use support as in the attached bgcode or use your own.
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
There are a lot of online meetings these days, and you see lots of trouble. The most common one is that someone comes into the meeting. I made a sign board for during zoom meetings. A step file is also uploaded, you can mix, change fonts…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
Greenhouse jar mk2 Turn your empty jar into a small greenhouse for your growing plant. This model is suitable for pot with a 8.5cm diameter and 7cm height. The model is designed to allow you to easily take off the jar for watering. This…
Wydruk około 8,01 €–9,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My first model!! A new dust port to be able to connect a 50mm dust hose, at a 45 degree angel to the top port of the saw. This way the hose has a bit more freedom to move when the saw is turned.
Wydruk około 2,28 €–2,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed using ePLA. Support is required as already planned under the attached bgcode file, or use your own. Threads are NPT type.
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
Standard print settings. If you like the design. Check out these tealight candleholders: https://www.printables.com/model/1135611-greek-tealight-pillars
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This model includes four separate .stl files , each corresponding to a different color. I printed each part individually on my Ender 3 Max Neo and then assembled all the pieces like a puzzle. The result is a clean, multi-colored design…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Refined Simon's grease filler. Prints a bit better and faster. No supports needed. 2 perimeters is enough. Attaching f3d file if anyone wants to tweak it.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
This Spinning Top works great and is easy to print. A steel ball with 4.5 mm diameter is needed, but you can also print a tip (included), if you don't have such a steel ball. Many Spinning Tops can be found, but I thought I could design a…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Resized Grease Jar from Thingiverse thing:1654011 by Shinny Toaster. I needed a larger diameter and a deeper jar. Remixed from original. I have included photos, STLs, and GCODE for i3 MK3S. Print instructions Remixed Grease Jar for…
Wydruk około 7,72 €–9,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Greenhouse jar Turn your empty jar into a small greenhouse for your growing plant. This model is suitable for pot with a 8.5cm diameter and 7cm height. The model is designed to allow you to easily take off the jar for watering. Cute…
Wydruk około 8,17 €–9,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple string art model to display on your desk. This is an 80mm x 80mm x 20mm circle with delicate strings. The strings form a curve on on side with a good amount of negative space. There are two versions, one with and one without a…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
a Hueforge Picture of a Green Dragon without a Backround Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The…
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
All on one plate. Main body printed on side , bracket layed flat, both with tree supports. Hardware required: M5x60 hex bolt DIN912 x 2 M5 connecting nut DIN6334 x 2
Wydruk około 16,12 €–19,71 € nettoWstępna wycena jednego wariantu
Settings: Nozzle: 0.4 mm Leyer height: Up to you, I used 0.20 mm No supports needed If this message popsup, look at 4th image and rescale it :) Easy and fast to print!
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Le Sombo Canard de bain Grey Star est une merveille fantastique venue de l'espace. Avec son design inspiré des étoiles grises, ce canard en caoutchouc apporte une touche de fantaisie galactique à l'heure du bain. Il est parfait pour les…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Meet the 30mm CO₂ Fun Grenade – where creativity meets excitement! Designed to turn engineering into play, this 3D-printed grenade (PLA, or any lightweight material you prefer) is made to look awesome, feel cool in your hands, and deliver…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . 1/10/2025: Complete Design…
Wydruk około 3,07 €–3,76 € nettoWstępna wycena jednego wariantu
Scifi Greeble Piggy Bank
Wydruk około 46,93 €–57,36 € nettoWstępna wycena jednego wariantu
This stand is suitable for holding the following Manicurist Green Flash nail polish products : 1x Green Flash nail polish remover bottle “dissolvant doux” 1x Cuticle softener bottle “émollient efficace” 1x Green Flash nail polish base…
Wydruk około 21,75 €–26,58 € nettoWstępna wycena jednego wariantu
Die Evangelische Kirche in Greifenstein-Nenderoth ist eine denkmalgeschützte neuromanische Wehrkirche. Das Modell, welches nur die äußere Form (nicht den Innenausbau) zeigt, entstand aus Videoaufnahmen von einem Drohnenflug. Per…
Wydruk około 31,31 €–38,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Brigadier General Andriy Biletskyi : Little Green Army Men Ill make a war planning table : Here it is. Andriy Biletskyi Role & Command: Brigadier General in the Armed Forces of Ukraine; Commander of the 3rd Army Corps and the "Center"…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
This is v3.1 of the model, the UGreen Nexode Batterybank Edition. Superior ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model is a 25mm coin with Recycle triangle <1> and PETG on both sides. Each coin consumes 40 cm of 1.75mm filament using a 0.4mm nozzle sliced as Prusament PETG. This print is useful for consuming the end of a roll that is too little to…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In collaboration with @Nuvz we created a lightweight and thin ornament for sending in your holiday cards! Should fit a standard wallet size photo (2inx3in or 75mmX50mm), slide the corners into the slits and send away to your loved ones…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Easel With board/Chalkboard for wishes or greetings Perfect decoration for Christmas table or any other decoration I printed Easel using White PLA and blackboard in Black to use white chalk ( which I don't have at the moment of taking…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena jednego wariantu
Great serpent (Dragon) (two colours) 20 cm - fan, matrix for graphics or for frottage If you use it as fan, you may find model of fan handle here: Fan Handle od autora Eva Máčová | Stáhněte si zdarma STL model | Printables.com Important:…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Eye part of Pot of Greed
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
If your compass cover has disintegrated like mine then you can just print a new one or download the free file and get it. Not sure if this compass came with Macgregors but this is the one that came with mine. Dimensions are I.D = 125mm ,…
Wydruk około 12,69 €–15,52 € nettoWstępna wycena jednego wariantu
tigre
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Wall art: Regret (two colours) 20 cm
Wydruk około 2,40 €–2,94 € nettoWstępna wycena jednego wariantu
Celebrate your love for the woods with the Outdoor Life coaster—a rugged yet classy design made to bring the outdoors in. This model uses purposeful extrusions to guide flawless color swaps and includes a .3mf project file with pause…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
EN: The stand in the style of Greek architecture is modular and consists of the following parts: - a universal column with a thread for head screwing - 3 versions of interchangeable heads (Doric, Ionic and Corinthian) - 5 length…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the first thing I have designed so it may be overly engineered but it works for me. I purchased the Creality 10W Laser module and as I have converted my printed to direct drive (using the Creality conversion kit) I could not use…
Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu
![[v2 abailable!] ATC Flight Progress Strip System](https://media.printables.com/media/prints/57584/images/605984_6bf0de79-4719-4c62-8bae-7d132891ef8d/img_20210221_144815.jpg)
