Liczymy pasujące modele…
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Gridfinity dremel bit storage. Remixed to reduce the print time by making a lid instead of holes going through the part
Wydruk około 4,48 €–5,48 € nettoWstępna wycena jednego wariantu
This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Wydruk około 9,65 €–11,80 € nettoWstępna wycena jednego wariantu
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
The Gridfinity Screw and Nut Measurement Tool is a must-have for any DIY enthusiast. This compact and durable tool is designed to accurately measure the size of screws and nuts, ensuring a perfect fit every time. With its easy-to-use…
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
This is a mashup of two very cool systems. Additional Materials: 6 pcs - M3 x 6 mm bolts (or M3 x 4mm) 6 pcs - M3 x 8 mm bolts 14 pcs - 3 mm x 35 mm rod 2 pcs - 3 mm x 32 mm rod (for the bottom of the front latches 2 pcs - 3 mm x 25 mm rod
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Wydruk około 4,81 €–5,88 € nettoWstępna wycena jednego wariantu
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena jednego wariantu
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Wydruk około 4,76 €–5,81 € nettoWstępna wycena jednego wariantu
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Socket set for 1/4" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 4,64 €–5,68 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
Here is a Gridfinity baseplate designed to save filament and magnets. It still uses the default 6x2mm magnets in the same positions and is compatible with other gridfinity bins and models. There is an included STEP file so you can make it…
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
I loved the idea behind cmsj's 45-degree AirPods Pro holder, but I wanted to print a model that was a bit more precise. I pulled dimensions from Xials' extremely precise CAD model of the device to make a custom-fit version using…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on the Fusion 360 plugin, this 3x2 module holds a set of small Trojen metric Allen keys ranging from1.5mm to 6mm. The bin has no stackable lip and the size labels are raised so a colour change makes them easier to read.
Wydruk około 3,59 €–4,39 € nettoWstępna wycena jednego wariantu
Take your Gridfinity to new heights with Gridfinity Legs! Legs for your Gridfinity Bases. Have screw holes on top and bottom so that Gridfinity Baseplates can be securely mounted to them. Bottom of legs fit into GridFinity Bases, so you…
Wydruk około 12,78 €–15,62 € nettoWstępna wycena jednego wariantu
This is a 3x4 holder designed for spade bits. It supports imperial (inches) 1-1/2, 1, 7/8, 13/16, 3/4, 5/8, 1/2, 3/8. There is an extra 1 inch slot, for all those folks that have an extra spade bit, but don't know where it came from.
Wydruk około 12,66 €–15,48 € nettoWstępna wycena jednego wariantu
You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Wydruk około 4,27 €–5,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 2x4 Gridfinity bin designed to hold 140mm tall Field Notes notebooks. A single bin can hold 12-16 notebooks depending on how tightly you want to pack them. Once filled with Field Notes notebooks, the overall height is roughly…
Wydruk około 8,04 €–9,83 € nettoWstępna wycena jednego wariantu
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Wydruk około 7,58 €–9,26 € nettoWstępna wycena jednego wariantu
If you do not want to ditch your Dewalt drill bit case, then this custom 3x4 Gridfinity holder is for you!
Wydruk około 7,05 €–8,61 € nettoWstępna wycena jednego wariantu
Here's a small 1x1 Gridfinity block that can hold up to 4x Oral B IO brushes. I also made a 2x version as 4 brushes can be a bit tight. On the 4x model the stands are placed so that there's a smaller gap against the wall, where the 'back…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
I don't use magnets, so I made this Remix.
Wydruk około 14,83 €–18,12 € nettoWstępna wycena jednego wariantu
Made with my parametric gridfinity box . I've seen these in the wild. But I was not sure about clearences and they seemed to be higher on sides than on top, which makes inserting swatches pain. By elevating the middle, you have no problem…
Wydruk około 3,87 €–4,74 € nettoWstępna wycena jednego wariantu
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Wydruk około 6,35 €–7,76 € nettoWstępna wycena jednego wariantu
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Wydruk około 13,19 €–16,13 € nettoWstępna wycena jednego wariantu
A Gridfinity tool holder for an iFixit Kit.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
I have a deburring tool with a different shaped handle (https://www.amazon.de/gp/product/B07R9YNSJM/), so I remixed the holder to fit that :) The model includes the Fusion 360 files as well. I printed it in Das Filament PLA Black, 0.3mm…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…
Wydruk około 6,49 €–7,93 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
I made a simple Chapstick and Vicks inhaler holder, there was some extra space so i added two more holes.
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Thanks to @FruitieX for the great original model. Modifications from their model: Resized the opening to work with the Added pass-through holes to allow wires to go under the gridfinity baseplate. Removed some extra features that were…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Wydruk około 4,57 €–5,59 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Same as the old original design except 14mm less wide. The gain is that you can place them snug together side by side, and hence can put overlapping gridfinity bins. In order to handle a lot of weight its not possible to go with only 2…
Wydruk około 10,52 €–12,85 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Gridfinity 2x4 bin holder for the modula system The holder has room for 2x4 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 2 adapaters biltema (or vanilla adapters ) to peg board/wall…
Wydruk około 8,26 €–10,10 € nettoWstępna wycena jednego wariantu
Originally made to hold my razer trinity sideplates, I think it can be useful to other people. Two versions are provided : one 4u tall (low), and one 8u tall (High, no picture availlable)
Wydruk około 2,08 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity 2x3 bin holder for the modula system The holder has room for 2x3 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 1 adapater biltema (or vanilla adapter ) to peg board/wall…
Wydruk około 5,87 €–7,17 € nettoWstępna wycena jednego wariantu
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Changes I changed the overall width and length by 2 mm (1 mm each side) which makes it fit a lot better. I also removed a few mistakes that were made by adding the area around the original baseplate. And to make it even easier to screw…
Wydruk około 13,62 €–16,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
Holder for aluminum setup blocks / spacers and 1-2-3 block compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
Gridfinity 2x2 bin holder for the modula system The holder has room for 2x2 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 1 adapater biltema (or vanilla adapter ) to peg board/wall…
Wydruk około 4,39 €–5,36 € nettoWstępna wycena jednego wariantu
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu
It takes up 3 gridfinity squares so it Is not a suitable size for a real fingerboard, Or skateboard. so there is a small fingerboard that will be printed alongside the ramp I printed it in PLA
Wydruk około 4,30 €–5,25 € nettoWstępna wycena jednego wariantu
Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.
Wydruk około 5,37 €–6,57 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Prints very well in PETG with 10% gyroid infill and 3 outer layers.
Wydruk około 1,86 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
These two storage trays allow you to display your Filament Color System Chips (FCS) in Zack Freedman's gridfinity . Storage Tray Features 4x1 tray stores 20 FCS chips 4x2 tray stores 37 FCS chips FCS Features Easily determine material and…
Wydruk około 6,54 €–7,99 € nettoWstępna wycena jednego wariantu
A gridfinity charger for your Sonicare Toothbrush.
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No magnets. Stores a 50ml bottle. There was a little space left over, so I made a little rectangular storage area. No supports 15% Infill PLA Fits my bottle like a glove.
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
A 1X4X2U bin made to hold 2 Olfa Craft Knives with thumb slot for easy removal of the craft knife
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple caliper holder with slots for 2 15cm (6 inch) scales. Just took a picture of my calipers, imported into F360, and traced. Easy. And I rounded the corners a little more than normal to make is fit on my MK4 build plate - yes, a 6x2…
Wydruk około 7,27 €–8,88 € nettoWstępna wycena jednego wariantu
Holds 15 spools of thread that are 19.2mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 19.7mm to easily…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
To be use with https://www.printables.com/model/535225-gridfinity-battery-holders
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
I love Gridfinity, and I also love to maximize storage space. I am not generally happy with rectangular bins to store stuff. A cutout shape ensures the right item returns to the right spot in the drawer. In this case, I was able to angle…
Wydruk około 6,63 €–8,11 € nettoWstępna wycena jednego wariantu
Took the concept of jgremlin's design and remixed it to better fit the dimensions of my wrenches. Metric Version.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for CR2025-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 10 batteries. A 1x2x4 bin that fits 20 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.
Wydruk około 5,21 €–6,37 € nettoWstępna wycena jednego wariantu
Box for Dremel Versatip with accessories. I made some small changes after the first print, didn't print it after the changes. So if there some changes needed please tell me. (Fighting with fusion360 after every update they make) 12.11.25:…
Wydruk około 12,59 €–15,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
This is for those random things like the shown Black & Decker Bit Mini-Case. It is a 2 x 2 unit and has a height of 2 units.
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
