17 447 modeli
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena jednego wariantu
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
Wydruk około 6,77 €–8,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…
Wydruk około 3,22 €–3,94 € nettoWstępna wycena jednego wariantu
A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…
Wydruk około 12,31 €–15,05 € nettoWstępna wycena jednego wariantu
Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Wydruk około 9,65 €–11,80 € nettoWstępna wycena jednego wariantu
Screws labels with pictures of DIN912 screws
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
This is a mashup of two very cool systems. Additional Materials: 6 pcs - M3 x 6 mm bolts (or M3 x 4mm) 6 pcs - M3 x 8 mm bolts 14 pcs - 3 mm x 35 mm rod 2 pcs - 3 mm x 32 mm rod (for the bottom of the front latches 2 pcs - 3 mm x 25 mm rod
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Holder for Ryobi drill bit collection compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill bit sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Wydruk około 8,73 €–10,67 € nettoWstępna wycena jednego wariantu
Simple, no bells, no whistles watch stand with a base compatible with Zack Freedman's Gridfinity System . Fits in a 1x2 standard 42mm Gridfinity space. When configured for a 7.25" (18.5 cm) “wrist” it is roughly 42x84x84mm. No holes for…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity screwdriver holder for Craftsman screwdriver set.…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
Wydruk około 8,72 €–10,66 € nettoWstępna wycena jednego wariantu
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Wydruk około 4,76 €–5,81 € nettoWstępna wycena jednego wariantu
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
This 1x1 gridfinity module holds a stack of 20 6x2 magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray. You can operate the magnet server with one hand. There are interior compartments, but if you…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Socket set for 1/4" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 4,64 €–5,68 € nettoWstępna wycena jednego wariantu
This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…
Wydruk około 6,66 €–8,14 € nettoWstępna wycena jednego wariantu
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Wydruk około 3,13 €–3,83 € nettoWstępna wycena jednego wariantu
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
This is a basic usb stick storage module using the Gridfinity plugin for Fusion360. The .f3d file includes the parameters used for the width, depth and thickness of the tongue on the usb sticks I was using. I later saw…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
For just one or two tweezers
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
This is a baseplate for Gridfinity system to screw it down to a wooden surface using small wood screws. I modified the screw holes with chamfers to allow usage of little countersunk wood screws 2,5x10. It is a remix based on…
Wydruk około 4,19 €–5,13 € nettoWstępna wycena jednego wariantu
Didn't like any of the print in place Gridfinity baseplates as they didn't seem single material friendly. I modeled in single line supports to get a good blend of adherence and still being able to separate. Modeled a solid tower in each…
Wydruk około 6,11 €–7,46 € nettoWstępna wycena jednego wariantu
Honestly this remix of this design is way better than mine original. https://www.printables.com/model/659216-gridfinity-tweezer-box-angled-entry Rest your tweezers with style. Gridfinity Yeah, by Zack Freedman - gridfinity.xyz. Box has…
Wydruk około 5,47 €–6,68 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Wydruk około 4,27 €–5,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 2x4 Gridfinity bin designed to hold 140mm tall Field Notes notebooks. A single bin can hold 12-16 notebooks depending on how tightly you want to pack them. Once filled with Field Notes notebooks, the overall height is roughly…
Wydruk około 8,04 €–9,83 € nettoWstępna wycena jednego wariantu
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Wydruk około 7,58 €–9,26 € nettoWstępna wycena jednego wariantu
Comfortably holds two PCIe devices, or one multi-slot device without tipping over. Both cards fit without bumping into each other, and they can be lined up without hitting the cards in the next or previous gridfinity. Some PCI devices…
Wydruk około 4,80 €–5,87 € nettoWstępna wycena jednego wariantu
Here's a small 1x1 Gridfinity block that can hold up to 4x Oral B IO brushes. I also made a 2x version as 4 brushes can be a bit tight. On the 4x model the stands are placed so that there's a smaller gap against the wall, where the 'back…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Wydruk około 6,35 €–7,76 € nettoWstępna wycena jednego wariantu
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Wydruk około 13,19 €–16,13 € nettoWstępna wycena jednego wariantu
A Gridfinity tool holder for an iFixit Kit.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
I have a deburring tool with a different shaped handle (https://www.amazon.de/gp/product/B07R9YNSJM/), so I remixed the holder to fit that :) The model includes the Fusion 360 files as well. I printed it in Das Filament PLA Black, 0.3mm…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Wydruk około 10,14 €–12,39 € nettoWstępna wycena jednego wariantu
I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…
Wydruk około 6,49 €–7,93 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Socket set for 3/8" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Will continue to add to this collection as I work on it
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Designed to fit the drawers for this Husky Work Table . I believe the 72in version of this work table has the same sized drawers so it should also fit. You'll need to print: 1x Corner Top Left (1) 1x Corner Top Right (2) 1x Corner Bottom…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Changes I changed the overall width and length by 2 mm (1 mm each side) which makes it fit a lot better. I also removed a few mistakes that were made by adding the area around the original baseplate. And to make it even easier to screw…
Wydruk około 13,62 €–16,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
#gridfinity, #ZackFreedman
Wydruk około 3,14 €–3,83 € nettoWstępna wycena jednego wariantu
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
I made this to hold my threaded insert tip set. It's stackable when filled, and the bits are arranged in size order (I've given a bit more space for the larger bits). They are arranged clockwise in increasing size from the bottom right.…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu
It takes up 3 gridfinity squares so it Is not a suitable size for a real fingerboard, Or skateboard. so there is a small fingerboard that will be printed alongside the ramp I printed it in PLA
Wydruk około 4,30 €–5,25 € nettoWstępna wycena jednego wariantu
Socket set for 3/8" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.
Wydruk około 5,37 €–6,57 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This is a Gridfinity Storage Case for the Prusa Mini+ (Kit) 3d-printer you can store up to: 1x Needle-nose pliers Nozzle cleaning stuff 1x Universal wrench 4x Allen keys 1x Torx key 5x Glues for printbed 8x Nozzles Prusa mini + Sparparts,…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Holds 25 spools of thread that are 30mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Reuploaded version 1 to better…
Wydruk około 10,37 €–12,67 € nettoWstępna wycena jednego wariantu
Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Prints very well in PETG with 10% gyroid infill and 3 outer layers.
Wydruk około 1,86 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
A gridfinity charger for your Sonicare Toothbrush.
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
Simple gridfinity tray to store your FNIRSI DPS-150 DC power supply. The power supply fits snuggly halfway down in the tray and can be lifted up with no problems. You can store the alligator clips and other accessiories in another box,…
Wydruk około 3,54 €–4,32 € nettoWstępna wycena jednego wariantu
The Phomemo P12 Pro label printer has been great for aiding in my Gridfinity organisation. So I wanted to organise the tool which helped me organise. This model is a 3x2 Gridfinity bin which holds the Phomemo P12 Pro along with 2 label…
Wydruk około 3,30 €–4,04 € nettoWstępna wycena jednego wariantu
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Swatch sized to a Gridfinity bin to keep track of various types of infill. Same size as my Filament Colour Swatches . Brother DK-11204 Multi Purpose Label template included in the files. Print Settings in the swatches shown: Vertical…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Gridfinity needle file bin for storing 3 needle files. Designed for the 6 piece needle file set sold by Prusa, but you need to print two bin for storing all 6 files. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
A holder in the same fashion as the 4 piece, but for a full seven! Holds: 10", 6", 3", 1.5", universal, 3/8" to ½", 3/8" to ¼"
Wydruk około 6,20 €–7,58 € nettoWstępna wycena jednego wariantu
A container for Ring batteries, in the style of Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled) by xavierly (although this one is not stackable!) It holds two batteries in a 1x2 Gridfinity container. The base…
Wydruk około 4,02 €–4,91 € nettoWstępna wycena jednego wariantu
A simple cut and merge of the original 2x2x6 Wallet Cards holder to fit a 1x3x6 space.
Wydruk około 2,72 €–3,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A gridfinity 1x1 bin to hold 1 or 2 SG90 servos. I originally designed it to hold 1 servo, and store the cable in the rest of the space, but then realised that I might as well as fixings for a second servo, in case you wanted to mount 2…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
A 5x2 Gridfinity bin for the Wahl model 9649 hair clippers. Print with draft quality settings with low infill, but ensure more than 2 top layers to avoid the pillowing in my photo.
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
Gridfinity Steel Ruler & Pencil Holder Due to myself only having a smaller build plate on my ender 3 I designed my own Ruler & Pencil Holder. As you will see I have split this so I can print it on my smaller plate. After printing and a…
Wydruk około 9,18 €–11,22 € nettoWstępna wycena jednego wariantu
Gridfinity is a highly adaptable modular system designed to organize tools, parts, and small items. Here are the key components you can 3D print: Gridfinity Bins Modular storage containers designed to snap securely onto Gridfinity…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Gridfinity-compatible tray is specially designed for the WMF Palermo cutlery set, accommodating neatly 12 pieces each of forks, knives, spoons, and teaspoons. Optimized to fit a standard 60-piece set precisely, this modular organizer…
Wydruk około 18,12 €–22,14 € nettoWstępna wycena jednego wariantu
Gridfinity Coin Battery Storage Box Compact Gridfinity storage block designed for various button cell batteries (CR2016, CR2025, CR2032, LR44, LR43, LR1130, LR41, LR626) Grid Size: 1x1x3 Magnet Support: Yes (6x2mm magnets) Print Settings…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
