P
PrintablesTomáš L
Peugeot 807 Headlight Washer Covers
If you have lost headlight washer covers of your Peugeot 807, you can print them. :o)
- Pobrania
- 444
- Polubienia
- 26
- Ocena
- 5
Wyniki wyszukiwania: headlight
634 modeli
P
Printablessternli27
DIY 18V Makita Bosch LED Worklight Headlight Lamp
LED Light: https://de.banggood.com/AMBOTHER-2PCS-Tri-ROW-4-Inch-9-32V-20-LED-Work-Light-Bar-Flood-Spot-Beam-Offroad-SUV-Driving-Truck-ATV-UTV-Boat-Fog-Lamp-Waterproof-p-1764193.html Attention: The lamp has no integrated undervoltage…
- Pobrania
- 320
- Polubienia
- 70
- Ocena
- 0
P
PrintablesMattelec
Honda Ruckus/Zoomer LED Headlight Adapter
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…
- Pobrania
- 218
- Polubienia
- 15
- Ocena
- 5
P
PrintablesThe Computer Armory
1982-1992 Camaro EXTRA THICK Headlight Adjustment Base - plus various other GM Vehicles
EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…
- Pobrania
- 93
- Polubienia
- 14
- Ocena
- 0
P
Printablesjwendland
Aero Bridge with Headlight Mount (parametric)
The bridge is designed to be fastened with 2 zip ties to round 22mm aero bar extensions which are 81mm apart. The light mount should be compatible with many available headlights (10mm width, bore for M6x25 bolt). I printed this in PETG…
- Pobrania
- 71
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPeopleware
Scheinwerfer Gabelbefestigung / Mountain bike fork mount for headlight
Neue Version verfügbar ! (English below) Mein Mountainbike besitzt keine Befestigungsmöglichkeit für einen Scheinwerfer und der Lenker ist auch bereits voll mit allen möglichen Halterungen. Ich habe mir eine Scheinwerferbefestigung…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printablesjrsone
Pro4 SC10 headlight tabs & diffusors
The Team Associated Pro4 SC10 has a couple of issues around the front headlights, one being that the body pops up and on top of them during crashes, and the other being the excessive brightness of the LEDs when looking directly at them.…
- Pobrania
- 17
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSem Rispens
urban arrow headlight
this is an adapter for the urban arrow 2021 for the head light
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesModulexe3D
Miata POPUP Headlights Keyhanger - Single Hook
This the COOLEST way to hang keys in my opinion: Parts to Print: Backplate - 1 Main_body - 1 hook - 1 lifter - 1 Pin Small - 1 Pin - 1 light_Right - 1 light_Left - 1 Print Settings: Backplate: 15% Gyroid Infill, No supports Main_Body: 15%…
- Pobrania
- 2585
- Polubienia
- 1352
- Ocena
- 4,87
P
Printablesthall72
Lego Compatible (4070.dat) Brick 1 x 1 with Headlight
This model is compatible with the lego system.
- Pobrania
- 1174
- Polubienia
- 50
- Ocena
- 0
P
PrintablesMiceciCZE
Battery Holder for Bike Headlight
Holder for battery pack SolarStorm with a diameter of 32 mm. It can be used in combination with double-sided adhesive rubber band. Necessary components Rubber band Recommended material ASA / PETG Print settings Layer height = 0.2…
- Pobrania
- 957
- Polubienia
- 23
- Ocena
- 0
P
Printablescopperbricks
Audi B6 A4/S4 Bi-Xenon Headlight Dust Cap
General Info & Fasteners The dust cap on my Audi S4 headlight was super cracked and not watertight at all so I designed this replacement. I've only used it on the right hand side headlight but if you mirror it it will probably fit the…
- Pobrania
- 706
- Polubienia
- 35
- Ocena
- 5
P
Printablesredvsgreen
KTM EXC/EXC-F Front Headlight replacement
Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.
- Pobrania
- 604
- Polubienia
- 46
- Ocena
- 5
P
Printablestsukworks
'17-'23 KTM Headlight Frame for Diode Dynamics LED SSC2
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
- Pobrania
- 590
- Polubienia
- 84
- Ocena
- 5
P
PrintablesMegardStudio
2015-2021 DODGE CHALLENGER COLD AIR HEADLIGHT INTAKE RING TUBE WITH GRILLS
$100 for velocity stacks. No thanks. These will fit all Challenger models from the SXT to the Demon as long as they don't have the light tubes installed. On some models, you'll need to reach in behind the headlight and push in the 3 clips…
- Pobrania
- 547
- Polubienia
- 52
- Ocena
- 5
P
Printablesrazvan.cristea92
BMW E39 headlight long adjuster
This is the BMW E39 headlight long adjuster with all the injection mounding features removed. Place the part with the biggest flat part on the printbed, the ball cuts also indicates this. I recommend PETG or ABS and as much as possible to…
- Pobrania
- 439
- Polubienia
- 40
- Ocena
- 0
P
Printablesrazvan.cristea92
BMW E39 headlight short adjuster
This is the BMW E39 headlight short adjuster with all the injection mounding features removed. I recommend PETG or ABS
- Pobrania
- 420
- Polubienia
- 42
- Ocena
- 0
P
PrintablesHMC Motorsports
Headlight Duct Honda Civic EK9 / EJ9 (facelift version: '98-'00)
Left Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for K-Swapped cars with air filter on left side. Mounting holes to be drilled upon fitment. Package includes: -Entire headlight as a…
- Pobrania
- 366
- Polubienia
- 34
- Ocena
- 0
P
Printablesneplatny udaj
Volvo V50 headlight washer cover
The plastic clip on the cover broke and whole piece fell off. I was able to find it so I've modelled a new piece based off it. I've made the clip a bit beefier so it doesn't break again. This is the driver's side. Passenger should be the…
- Pobrania
- 351
- Polubienia
- 22
- Ocena
- 5
P
PrintablesRiccardo
Beta rr LED Headlight
An aftermarket headlight bracket for an led light bought on aliexpress ( https://a.aliexpress.com/_mq77pMZ ) In order to fit the front plate you'll need to heat it with an hair dryer, after the plate has taken the headlight shape, hot…
- Pobrania
- 340
- Polubienia
- 17
- Ocena
- 5
P
PrintablesTallahassee
Audi A6 C5 allroad Headlight Washer Cover
Headlight washer covers for Audi A6 C5 allroad. Re-modeled based on original 4Z7955275 part. The thickness of hooks (the ones that latch on the washer nozzle) is slightly increased for durability. The scale is OK. See comparison photos.…
- Pobrania
- 335
- Polubienia
- 33
- Ocena
- 5
P
PrintablesTico
Hyundai Tucson headlight dust cap/cover
dust cap for the headlight of a Hyundai Tucson. I lost one of the dust caps while replacing a headlight so i made this design to replace it. Print instructions There are 2 printable parts, 1 dust cap and 1 seal ring. I recommend to print…
- Pobrania
- 335
- Polubienia
- 37
- Ocena
- 5
P
PrintablesMižufko
KTM Headlight Replacement
KTM Headlight Replacement I added one more bracket to this model for better stability…also the brackets are wider for better strength and the holes are wider for a better fit of the original screws no supports 80-100% infill
- Pobrania
- 333
- Polubienia
- 27
- Ocena
- 0
P
Printablesswissmineral
New rims, tires and headlights for LEGO Porsche RSR
Because the original rims of LEGO ® Porsche 911 RSR set do not look like Porsche (Pic.3), here is my version of RSR rims and tires. For the rims I used black filament. The tires I printed out of flexfilament from Extruder. The…
- Pobrania
- 303
- Polubienia
- 48
- Ocena
- 2
P
PrintablesDouwe Miedema
BMW E39 M5 530I 528I 540I XEON Headlight Adusters
2 different models for the BMW E39 M5 530I 528I 540I recomended to print in PETG because it can get really hot.
- Pobrania
- 303
- Polubienia
- 38
- Ocena
- 0
P
PrintablesBlackCrow (RockyTop)
Thumper Headlight mod
Convert non functional headlights to functional headlights This is a headlight mod for the Thumper model found here- https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc This build was designed for…
- Pobrania
- 288
- Polubienia
- 71
- Ocena
- 5
P
Printablesredvsgreen
Husqvarna Headlight Replacement
Used for later Husqvarna enduro models, replaces the headlight so you don't break it during crash. Two versions, you can print with the Husqvarna Logo as well. (the one on the picture is upside down, printed it wrong). Added another…
- Pobrania
- 287
- Polubienia
- 10
- Ocena
- 0
P
Printables45Matches
4.75" 120mm Headlight Cap Bulb Dust Cover Hella 158 222-00 Fit for Mercedes BMW Mini Cooper
Replacement Hella 158 222-00 Polypropolene Cover for Halogen Headlamp Cover Fits Mercedes, BMW Mini
- Pobrania
- 281
- Polubienia
- 24
- Ocena
- 5
P
PrintablesLukas Fajkus
Skoda, VW - Headlight Adjustment Gear
3D model of Skoda Fabia I Headlight Adjustment Gear. The old plastic gears started spinning on the shaft so I made a new ones. Instructions: Print orientation: gear up, 10mm hex touching printer bed PLA (205/65 °C works for me), 0.1 mm…
- Pobrania
- 274
- Polubienia
- 32
- Ocena
- 5
P
PrintablesDust Hart
Headlight mask for 7"/178 mm
Headlight mask for round custom Headlights 7"/178 mm. I used an accessory headlight from Harley. The headlight is simply pressed into the mask and held in place with the help of 3 lips If you need a different diameter, please write to me…
- Pobrania
- 255
- Polubienia
- 26
- Ocena
- 0
P
Printablestuny
Working Headlight Kit - Dummy 13 Dirt Bike
Headlight Kit for Dummy 13 Dirt Bike Add some illumination to your playtime! Designed to power a headlight LED, this sleek design fills the void where the motor would go by incorporating a battery pack in it's place. This works off of 2-3…
- Pobrania
- 251
- Polubienia
- 120
- Ocena
- 0
P
PrintablesHMC Motorsports
Right Headlight Duct Honda Civic EK9 / EJ9 (facelift version: '98-'00)
Right Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for OEM D-Series or B-Series cars with air filter on right side. Mounting holes to be drilled upon fitment. Package includes:…
- Pobrania
- 234
- Polubienia
- 20
- Ocena
- 0
P
Printablesfrez_knee
B6 A4/S4 Headlight Adjuster Gears
These are replacement gears for the headlight adjuster mechanism on my B6 A4 with bixenon headlights. The gears often break or strip leaving you with no way to adjust the aim of the headlights. The assembly shown is for the up and down…
- Pobrania
- 232
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRoco Roco
Sherman S Titan Armor Headlight Mask (WIP)
Prototype for Sherman S Headlight mask. Helps cut light from shining into oncoming traffic as well as helps protect against small scratches. Also makes the SS look mean. Print in TPU.
- Pobrania
- 228
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJollyBob
Opel Mokka 2015 headlight washer cap in TPU.
I lost one of my headlight washer caps, so I made new ones printed in TPU matte 95a. Left and right are adjusted separately for a good fit. To fit them on the washers just pull the washer out firmly and set the new cap in place. I printed…
- Pobrania
- 228
- Polubienia
- 29
- Ocena
- 0
P
Printablesfrez_knee
Audi A4 Valeo Headlight Projector Bracket (B6)
A common issue with the projectors in OEM Valeo Bixenon housings fitted to B6 A4's is that the reflector bowl can become scorched which results in diminished light output. Instead of replacing the whole headlight housing, only to have the…
- Pobrania
- 221
- Polubienia
- 19
- Ocena
- 0
P
PrintablesSamet Muric
BMW X3 F25 Headlight Washer Cover
There was only left, I drew right and left. Not tested. Maybe a few corrections needed.
- Pobrania
- 210
- Polubienia
- 8
- Ocena
- 0
P
Printablesjon
VW T4 Headlight Holder | Scheinwerfer Halter
This is the plastic holder for the headlights on a VW T4. There is no printed thread. I cut the threads after printing. Holds the headlight perfectly.
- Pobrania
- 208
- Polubienia
- 20
- Ocena
- 0
P
Printableskrammer
H4 style headlight plug adapter
I used these to connect to 4x6" LED lights to the custom harness I make for customers. Bend the locking tab on the 7.6mm connector to lock into the adapter. Parts required: 7.6 mm female spade connector (some list as a 7.8) wire and…
- Pobrania
- 205
- Polubienia
- 12
- Ocena
- 0
P
PrintablesFerrariGuy
88-94 c1500 Chevy Truck OBS Headlight Switch Standoff Bracket
A bracket to replace the fragile stand off posts that the light switch brackets screws onto on the backside of 88 to 94 c1500 dash plinths. I've repaired 2 dashes with this having it printed in Nylon with an MJF printer. The remnants of…
- Pobrania
- 204
- Polubienia
- 29
- Ocena
- 0
P
PrintablesGunbleR
Kia ceed headlight dust cover
Dipped beam headlight cover for kia ceed. required original rubber grommet. made for mounting HID headlight There is also a version without the hole
- Pobrania
- 198
- Polubienia
- 19
- Ocena
- 0
P
Printablessoulrider911
3dSets Landy Headlight Lens and Headlight for LEDs
Needed a Headlight lens and headlight bowl (modified) with a 5mm hole for leds the 3dSets Landy build. Print with the dome facing up and use supports. You need a small CA glue dab to attach it to the inner headlight housing.
- Pobrania
- 196
- Polubienia
- 31
- Ocena
- 5
P
Printablesslabua
Headlight Grill 180 mm
Grill for a 180 mm motorcycle headlight. It has been designed for a Kawasaki ZR-7. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Supports: Yes Resolution: 0.2 Infill: 20+ Filament: Overture PLA/ABS/ASA Cream Black Category:…
- Pobrania
- 196
- Polubienia
- 24
- Ocena
- 0
P
Printablesmbe075
GMC & Chevy 2 LEDs headlights Upgrade for 3D SETS Model 14 (Max Team)
Warning You have to make an hole in the left and right grille parts provided by 3D SETS for the wires of the 2nd LED. Definition None. Printing Is required the same printer size than 3D SETS has defined. Infill 0%. The back face on the…
- Pobrania
- 188
- Polubienia
- 29
- Ocena
- 5
P
Printablesn.leinad
Subaru Legacy Outback Headlight Washer Cover
Made this replacement cover for the headlight washer nozzle on my dads car. OE number: LH-86636AG260 RH- 86636AG250 Compatible with: For Subaru Legacy sedan IV,2003-2009 For Subaru Legacy station wagon IV, 2003 - 2009 For Subaru Outback…
- Pobrania
- 184
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMarkus_p
3DSets Headlight lens for Model 7 Buggy
Front headlight lens for Model 7 Buggy from 3DSets
- Pobrania
- 183
- Polubienia
- 42
- Ocena
- 5
P
PrintablesMatīss Graudiņš
E36 Headlight tab
Replacement for your broken E36 headlight tab. Suggest printed solid for improved strenght, then soldered on to the headlight
- Pobrania
- 183
- Polubienia
- 20
- Ocena
- 0
P
PrintablesJakub
Citroen C4 headlight cover
Lost a plastic cover for Citroen C4 Spacetourer. Printed from PLA works for 3 years already. But I advise to print it from TPU or some flexible material.
- Pobrania
- 180
- Polubienia
- 41
- Ocena
- 5
P
PrintablesSt4n
Max Team Model 14 Van headlights
Remixed version of headlight for 3DSets' Max Team Van (Model 14). Contains two pieces: reflector and glass. During assembly I glued G157UPW LEDs to the reflector. You can add thin layer of foil inside of the reflector. I printed van-glass…
- Pobrania
- 179
- Polubienia
- 34
- Ocena
- 5
P
PrintablesTanner Farley
GM Headlight / HVAC Control Knobs & Switch Panel
Designed these to fit my 2000 Chevy Silverado. Pretty basic design that I thought looked nice. The "insert" was snug enough that a press fit will hold it in place with no adhesive. Use the test prints to make sure the knobs fit snug. HVAC…
- Pobrania
- 175
- Polubienia
- 30
- Ocena
- 0
P
PrintablesRoss Peters
Engwe M20 Headlight Gromet
The stock wire gromets did not seal the headlights at all, so these replacements are designed to make a better seal. Designed to be printed in TPU.
- Pobrania
- 174
- Polubienia
- 12
- Ocena
- 5
P
Printablesjimmyapage
S13 headlight motor replacement parts
Replacement cap and knurled adjustment knob for a 200sx 240sx 180sx Nissan S13
- Pobrania
- 173
- Polubienia
- 19
- Ocena
- 5
P
Printableswittmason
Scale steam locomotive headlight
Oil burning headlight to be used with Chris' 0-6-0 or any early steam locomotive. May need to be scaled to your scale.
- Pobrania
- 173
- Polubienia
- 10
- Ocena
- 0
P
PrintablesPéter Baranya
VW Passat headlight adjustment gear
100% infill, and simple support needed.
- Pobrania
- 171
- Polubienia
- 17
- Ocena
- 0
P
PrintablesFreek van der Horst
Yamaha XSR 700 7inch headlight
This is a headlight mount for the Yamaha XSR700, mine is a 2019 model. The print is made to fit the original mounting points / brackets and the original bolts. It is designed to (pressure) fit a 7 inch LED headlight. The front can be…
- Pobrania
- 171
- Polubienia
- 28
- Ocena
- 5
P
Printablesab
Corsa B headlight mount
Corsa B Headlight mount for keeping the headlight in place. Not as stable as the original, yet a cheap replacement doing its job. Corsa B Model 1993-2000 (S93) also known as Vauxhall Corsa Mk1 and some Chevrolet / Holden / Buick…
- Pobrania
- 169
- Polubienia
- 9
- Ocena
- 0
P
PrintablesVWELD
VW Golf MK4 1998 2004 headlight cover cap 1J1941607B vweld
I made a rear protection cover for the golf 4 vehicle spare part light Replacement part Enjoy!
- Pobrania
- 166
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJamash47
E90 E91 E92 E93 headlight cap
headlight cap for bow e90
- Pobrania
- 160
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMiami dev
Audi, VW, hella, depo, Headlight range adjustment Gear
Repair gear for range adjustment. can be applied to many manufacturers
- Pobrania
- 159
- Polubienia
- 14
- Ocena
- 0
P
PrintablesDockGuy
H4 Headlight connector adapter cover male plastic sheath H0518-3P / DJ7033-7.8-11 (updated)
This is a reproduction of part [H0518-3P / DJ7033-7.8-11] by the 3B auto parts manufacturer for use with H4, 9003, and HB2 7.8mm spade terminal headlight wiring. Original part: http://www.iiib.biz/en/proView.asp?id=550 For the matching…
- Pobrania
- 158
- Polubienia
- 52
- Ocena
- 0
P
PrintablesEmir Durmić
Headlight dust cover cap 90009172
Printed this replacement for a friend. He drivers VW Passat B7 and it fits like a glove. Original has some kind of rubber gasket (it could be hand cut or maybe channel for the gasket could be filled with silicone).
- Pobrania
- 157
- Polubienia
- 8
- Ocena
- 0
P
Printableshandro
E30/E24 US Ellipsoid headlight adjustment knob
Headlight adjustment knob for US Ellipsoids in E30 / E24. Mates with PN 63121385397. This is meant to be used as a tool and not left installed permanently. Note: I've only tested this on my US 1990 325i E30 Coupe. I have not tested the…
- Pobrania
- 156
- Polubienia
- 16
- Ocena
- 0
P
Printablesprider
Honda Trail 90 Headlight Bucket / Housing
Several years ago I designed a replacement headlight housing for a Trail 90, I decided I wanted to fully redesign the housing now that I'm much more proficient in CAD. stl, step, 3mf and f3d files all included. I haven't yet printed and…
- Pobrania
- 155
- Polubienia
- 8
- Ocena
- 0
P
PrintablesCottees
Subaru H7 Headlight Plug
Replacement plastic housing for the H7 headlight plug in a Subaru Liberty/Legacy. May work with other cars.
- Pobrania
- 152
- Polubienia
- 24
- Ocena
- 5
P
PrintablesLuponaito
Super 73 Loominade Honeycomb Headlight grill
Ok so I just bought my Loominade headlight and installed it but thought it would be cool if it had a grill. I didn't like the grills online, so I decided to make my own based on the honeycomb pattern on my Union State rear rack. I printed…
- Pobrania
- 151
- Polubienia
- 9
- Ocena
- 0
P
PrintablesGeorge
Headlight washer cover OPEL VECTRA C
Opel Vectra C headlight washer nozzle cover to protect the nozzle
- Pobrania
- 151
- Polubienia
- 19
- Ocena
- 0
P
PrintablesHelioplast LTD
Peugeot 5008 headlight washer cover
You can modify it if you want, it is definitely not perfect, but it is a pretty accurate copy of the original.
- Pobrania
- 148
- Polubienia
- 18
- Ocena
- 0
P
PrintablesPhoto Type
BMW e90 (2007) headlight dust cover
Headlight cover for car BMW e90 i made from measureing an original you may need to adjust on long side to be a bit shorter but i printed it as is and it worked fine, printed it on elegoo mars 3 with abs-like resin.
- Pobrania
- 145
- Polubienia
- 23
- Ocena
- 0
P
PrintablesTanner Farley
GM Headlight Switch Knob
GM headlight switch knob to replace warn out knob. These are notorious for the rubber to start disintegrating after years of use. Designed to mimic aftermarket HVAC control knobs. Added a second set of models to mimic Express van knobs.…
- Pobrania
- 144
- Polubienia
- 28
- Ocena
- 0
P
PrintablesMarik Komarik
Headlight + turn signal bracket - 27mm motorcycle fork
I printed it standing up, since I needed some flexibility around the fork and would prefer not to print a beefier one in 2 days. There are M5 nut slots on the smaller part, maybe it will make mounting this on your motorcycle more…
- Pobrania
- 144
- Polubienia
- 18
- Ocena
- 0
P
PrintablesDimation
921973Z520 hyundai i40 headlight mounting
921973Z520 hyundai i40 headlight mounting
- Pobrania
- 144
- Polubienia
- 21
- Ocena
- 5
P
PrintablesDaniel Hoško (GaPa)
Front sensor rod xenon headlight Laguna 3 ref renault 538100005R
There is one already made on Cults3d but I made mine again from scratch because the other one is paid. This isnt the same model downloaded and reuploaded. This is original model. The walls might be too thin but from my testing it is few…
- Pobrania
- 144
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBrent
KTM 690 Enduro/SMC R 2012-2018 Headlight Mount
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
- Pobrania
- 142
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMariusz Szafranski
BMW e60 Headlight Tabs
My Driver side tab cracked in half. It would be a party when on the highway/ move excessively on bumps. Mirror it for the driver side !! PRINT WITH SUPPORTS !! There's a hidden pocket in the tab, you wont see the supports but it will make…
- Pobrania
- 141
- Polubienia
- 11
- Ocena
- 0
P
Printablesdamballa92
Golf MK3 Hella Headlight Repair Kit
I believe most people owning a MK3 VW Golf is familiar with these. Either by overtightening or simply due to the part being too old, these end up breaking and making the headlight feel “loose”. Tried with ABS myself. ASA should work, I…
- Pobrania
- 140
- Polubienia
- 7
- Ocena
- 5
P
PrintablesMarkus_p
3DSets Headlight lens for Model 11 Sandy
Front headlight lens for Model11 Sandy from 3DSets
- Pobrania
- 139
- Polubienia
- 29
- Ocena
- 5
P
Printablesdajuji04
LED Headlight Cover for BMWs motorcycles
The purpose of these covers is to provide space for the LED headlight diffusers for BMW motorcycles, the great advantage of LEDs over halogen headlights is that visibility is improved and of course, aesthetics. I recommend printing in…
- Pobrania
- 138
- Polubienia
- 13
- Ocena
- 0
P
PrintablesAlberto A.
Porsche Cayenne Headlight disassembler
One of the common problems of the Porsche Cayenne first series are the electrical wires inside the headlights. There are various videos on Youtube on how to repair them but the biggest difficulty is dismantling the connector from the…
- Pobrania
- 138
- Polubienia
- 19
- Ocena
- 4
P
PrintablesKotyarko_O
Bmw E30 - headlight control switch hand
Bmw 3 E30 - headlight control switch hand (knob). Suitable for m5 thread. Different from the original part. Modelled not according to the original. Clean and ribbed borders versions included. Fusion360 source-file (*.f3d) attached.…
- Pobrania
- 137
- Polubienia
- 24
- Ocena
- 0
P
PrintablesS.Eisenhut
Astra J headlight cleaning system nozzle holder 13258411 13258412
Astra J headlight cleaning system nozzle holder with the part numbers 13258411 and 13258412
- Pobrania
- 135
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAdam Kirkham
Buell Lightning Headlight Assembly
Buell Lightning headlight assembly without the reflector. I may add this at a later date. The model is dimensionally accurate for every feature I was able to measure. This headlight assembly design was used for 883cc (xb9) and 1203cc…
- Pobrania
- 132
- Polubienia
- 5
- Ocena
- 0
P
PrintablesqMeats
BMW F30 HEADLIGHT WASHER COVER (front) "COMBO"
All three BMW F30 bumper covers were scanned from cars of different revisions, so one of them should definitely fit you) There is also an "eng" model, which is a scan of the 3rd lid.
- Pobrania
- 131
- Polubienia
- 6
- Ocena
- 0
P
Printablesprz3d
VW Bora/mk4 Jetta headlight cover
Print with something a bit more heat resistant than pla (mine is pte-g) and put D profile window seal trim in it and it will fit your car.
- Pobrania
- 131
- Polubienia
- 19
- Ocena
- 0
P
PrintablesDaniel Hošek
Headlight for JEEP Wrangler JL 1:8 (3Dsets.com)
Before installation can be equipped LED in the headlights: I printed the models "Front light - left.stl" and "Front light - right.stl" with holes 5 mm (corresponds to the size of my LEDs). I respect the model license (model purchased on…
- Pobrania
- 129
- Polubienia
- 32
- Ocena
- 5
P
PrintablesFlorian Helm
LED headlight mod for Royal Enfield Hunter 350, mod. 2022/23
Replaces the stock headlight rim iot fit an ece certified 7" LED headlight assembly, in this case from MOTEA.com, Part No A031414, “Craftride LED Halo 7” for Harley Davidson ECE". Pretty much plug and play for the H4 part. To use the halo…
- Pobrania
- 129
- Polubienia
- 12
- Ocena
- 0
P
PrintablesRobert Givens
'97 Diahatsu Hijet S110P Headlight Trim Body Clip
I had a couple of the body clips on the headlight trim break on me so I modeled up some replacements. These print on their side with no support needed (I modeled all needed supports), you way want to add a brim. Material: ABS Wall loops:…
- Pobrania
- 127
- Polubienia
- 24
- Ocena
- 5
P
PrintablesHonzik1
Nami Burn-E led 12V headlight 2x10W visor
This is visor for 2x10W headlight which is used also for Nami Burn-e e-scooter. (Also called as " Work light 12V " on Aliexpress. When you switch lens from original 6D floodlight to 2D lens, this visor helps to to cutoff your light to not…
- Pobrania
- 126
- Polubienia
- 9
- Ocena
- 5
P
PrintablesEivind Birkemo
HEADLIGHT HIGHT LEVEL ARM - 60mm - 150mm. 11 FILES!
Arm for headlamp level sensor. fits 10mm ball. length from 60mm - 150mm, measured from senter ball to ball. STEP file included.
- Pobrania
- 126
- Polubienia
- 11
- Ocena
- 0
P
Printableshszer0
Triumph Tiger Explorer 1200 Headlight cover
Prints fine at 100% infill, ABS
- Pobrania
- 126
- Polubienia
- 23
- Ocena
- 0
P
PrintablesMadMax3D
Renault Espace - headlight level sensor articulation
I recommend to split the model in half vertically and rotate in slicer, then print and glue together. A paperclip works well as a locking element (inserted in the small hole). On the image there is an original mechanism.
- Pobrania
- 125
- Polubienia
- 13
- Ocena
- 0
P
PrintablesT Sims
1978 pa50 Honda Hobbit Custom headlight bucket.
A hole needs to be drilled for the stock speedometer spring.
- Pobrania
- 125
- Polubienia
- 3
- Ocena
- 5
P
PrintablesCortexian
Triumph Tiger 1200 Headlight Adjustment Tool
This is a headlight adjustment tool for the Gen 4 2022/2023 Triumph Tiger 1200 motorcycles. Designed to work in conjunction with a 3/8 inch wrench. The adjustment knob is in a very awkward space to access and is also very stiff to turn,…
- Pobrania
- 125
- Polubienia
- 5
- Ocena
- 0
P
Printablescoockie2910
Kugoo Kirin F3 Pro Max mount for headlights arctic v2 3 lens
For Kugoo F3 pro max
- Pobrania
- 124
- Polubienia
- 10
- Ocena
- 0
P
PrintablesVSpecENG
R33 GTS-T Headlight Cover
Back cover for an S1 R33 GTS-T headlight. Printed the cover in ASA and the gasket in TPU. Tree supports everywhere.
- Pobrania
- 121
- Polubienia
- 10
- Ocena
- 0
P
Printablescs900
FD3S RX7 headlight motor knob cover
This is a replacement cover for the manual headlight adjuster knob. The “stock” cover is a copy of the OEM part and would work very will printed form TPU or other semi-flexible material. The “024 oring” model uses a 024 oring to secure…
- Pobrania
- 120
- Polubienia
- 10
- Ocena
- 0
P
PrintablesBrayan
BMW 148132 Headlight Top Cap
Replacement headlight top alignment cap for BMW E39, E60, E61, E53. Designed with a flat bottom for better printing. Gasket is needed from previous cap or just some generic o-ring with ~34mm inner diameter. I recommend printing in some…
- Pobrania
- 120
- Polubienia
- 3
- Ocena
- 0
P
Printableswolffman
3DSets Headlight modification for LED Light
This is the headlight from the 3Dsets models with a hole in it for a LED light. It works really well with this lens: https://www.printables.com/model/237490-headlight-lens-cover-for-the-3d-sets-landy/comments/454368# Print in Silver Silk…
- Pobrania
- 120
- Polubienia
- 44
- Ocena
- 0
P
PrintablesAlokin
Headlight dust cover latch fix for BMW X3 e83
This is to replace the latch on the dust cover for the BMW e83 headlights, clean off the old latch pieces and just slide this in. Dust cover part number 1305239123 It holds nicely even if not glued. DO NOT glue, if you do it will be…
- Pobrania
- 120
- Polubienia
- 29
- Ocena
- 0
P
PrintablesRoo
Dice for Deer In The Headlights Game
The Deer in the Headlights game dice are wooden and the paint just wears off easily so I made these up as replacements, Category: Dice
- Pobrania
- 119
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDonkan
Headlight Wiper Cover Volvo S70/V70 1st gen
Cover plug for removed headlight wipers on Volvo S70, V70 1st gen. Contains a cavity to be able to fit even when the axle/motor assembly has not been removed entirely but only cut flush with the front using a Dremel or such. Disconnect…
- Pobrania
- 118
- Polubienia
- 14
- Ocena
- 0