119 modeli
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…
I remixed the HexScraper - Printbed scraper from visle to add a magnet so I could hang it from my X1 Carbon. The STL is designed for a tight fit using an 8mm x 3mm magnet but I have included a parameterized Fusion 360 file if you want to…
Clean bed. Fresh start. The Minimalistic HexScraper is a compact, one-piece scraper for removing filament remnants from your 3D printer’s build plate. A central grip keeps the tool close to your hand, while the hexagonal shape provides…
I was impressed by the concept of RostaP 's storage wall. It is super versatile and it is extremly easy to design your own addons. However, I found the actural panel design a bit to unspectacular. So I came up with the idea to repeat the…
Der Schaber kann ohne Support gedruckt werden. Die Dateien sind für den Druck mit PETG optimiert, andere Materialien sind auch möglich. Zur Befestigung der Klinge am Griff werden 2 M3 Quadratmuttern und 2 M3x12mm Inbusschrauben benötigt.…
This stand features a strong triangular structure combined with a lightweight honeycomb back, offering excellent stability while maintaining a clean and modern look on any desk. Key Features No supports needed - quick and clean print Fits…
This is a model of Hexside School of Magic and Demonics from The Owl House. It is 172mm wide, 159mm long and 83mm tall. I've tried my best with this model, but this building only appears from two angles and those don't even match up all…
HexStand v2 : Precision Engineering Meets Minimalist Design The HexStand is a masterclass in structural efficiency. Combining a robust triangular architecture with a lightweight honeycomb aesthetic, this stand offers rock-solid stability…
I only removed the sides of the HexScraper and scale it down to fit the same siza on the extrusions of the Prusa Mini+. Works well together with the Prusa Mini Hook for scraper tool .
Ender-3 V3 SE Tool Holder for HexScraper
A handle for a 6.3 mm Hex Shaft. Intended to assist with nozzle changes. Design considerations: Accept a standard 6.3 mm Hex Shaft. Use M3 bolts and nuts to secure shaft (likely in spares from printer build and mainenence). Large enough…
I added the “normal” hexagons to my scraper and thought, “why shouldn't i make partial hexagons for the borders aswell?” So here they are. The 1/3rd hexagons are for the small corners on top of the scraper. The flat half ones are for the…
This is a model of the airship used at Hexside from the show The Owl House. Dimensions Length Width Height wings up 71mm 31mm 34mm wings down 71mm 66mm 31 mm Print Instructions There are four methods to print this model. I've tested them…
It's a mashup inspired by Low Poly Buddy and Frog Hex Scraper. I think most of us agree hex scraper is probably a bit better than default printables scraper, but wanted something very on-brand Prusa. I like the way this grips better than…
Holder/clip that snaps to the frame of the MK4 to hold scrapers. Print 2 to hold the scraper straight. V2 - Reduced the width slightly so it is more snug to the frame.
This is a remix of a great scraper model with printables logo.
Features: Swappable blade to avoid having to print a whole HexScraper when yours is worn out. Hexagon with screw threads to secure a 8x2.7mm magnet. Hollow Hexagons for decoration. 2 Types of blades included: 2 Piece and Single Piece…
Inspired by the HexScraper and designed for the pocket tools challenge. With this pint-sized pocket pal packed in the pocket of your poncho, you can plunder PLA any place! Particularly if you are prone to placing piles of plastic pocket…
Paint on supports on the front edge, the rest of the model does not need supports. Orient the model so that the tab on the top the hexagon is facing up. The tab has been removed from the bottom of the model so that it sits flat on the…
I wanted to store the Hex-Scraper on my Mini but it was to wide to fit without interfering with the filament hose. So I remixed this smaller version. The hook I used can be found here:…
This a remix of Machvolum's model which comes from visle's original model. This version add's rounded corners to Machvolum's model. The theory is that on sharp angles (such as 90 degree corners or similar) the extruded filament tends to…
A scraper to clean the print bed of your printer with a modular blade, so it can be replaced when washed off! Changelog V2 improves dove tail (non retro-compatible) and adds hexagon pattern on the joint. V1 first version with a dove tail…
Hey, I was just trying tolerances with hexagon, but I found out I really like how it looks, so i printed more hexagons and I think it looks great. Of course all credit to author of HexScraper, I just made little modification.
Stackable hexagon storage box V2 Large A model with supports for the handles is provided because all printers cant handle the long bridge for the handles. The Bambulabs P1P could handle the handle bridge without problem but my V400…
Gridfinity holder for the HexScraper by visle and Bambu Lab Scraper Includes glue fit 6x2mm magnet and screw holes Made with the Gridfinity Fusion 360 Addon By Le0Michine
HexScrappers Pack is made for easier removal of prints. Please let me know your experience.
The same great HexScraper , but now with more magnetism! The embedded magnet allows you to hang the scraper on a metal surface, such as a metal desk or the PSU on the side of the MK3/S/S+. The magnet pocket is sized for a 9.5mm x 3.2mm…
Holds the great HexScraper on the frame above the PSU. Single piece is enough but it will wobble side to side. Print two and mount them far apart to avoid that. The fit is quite tight to prevent sliding, be careful when mounting. Tested…
This is a variant of cubic trisection. You shold print every part 3 times. The pieces need support.
Ender-3 V3 SE Tool Holder with HexScraper place
A compact and lightweight print-in-place holder for the popular HexScraper (by visle) – made to fit the Honeycomb Storage Wall system. Perfect fit for the HexScraper ( Link ) Compatible with Honeycomb Storage Wall ( Link ) Print-in-place…
Found the 8mm magnet not to work at keeping the scraper attached during operation, bumped it up to a 10mm magnet, so far has moved at all during printing.
Stackable hexagon storage box V2 medium Printed with Filalab PLA in Violet and Galaxy Black on a BBL P1P and Flsun V400 with a standard 0.2mm layer height and no extra supports. A model with supports for the handles is provided because…
Gridfinity bin for HexsScraper (https://www.printables.com/model/122894-hexscraper-printbed-scraper) + open bin for whatever you want or fits Creality included knippers.
Slimmer variant used in our shopfloor. edit: added STEP file for remix purposes
Very easy to remove your print parts with this ! Enjoy :) i do this with my Mini+ Prusa
i made a split up version to print without support and a full version I would enjoy seeing your makes this is a hanger for the famous hexscraper I used my end cap replacementpart for this…
hexscraper but a thinner version [PRINT AT 100% INFILL]
Stackable hexagon storage box V2 Extra Small All of the boxes in HexStorage can be stacked on some other box, this one can be put sideways on the small and medium box, you can fit 2 beside eachother. For different sizes look at my profile…
HexScraper better Version
Skadis holder for Hexscrewdriver from Amazon / Aliexpress Made 2 versions for 4 or 7 screwdrivers. Printed with PLA, 3 walls, 0,4mm nozzle, 20% Infill, ….
A simple left hand side tool holder for the Ender 3 V3 SE/KE anti shake construction. With a place for a hexscraper.
Stackable hexagon storage box V2 small A model with supports for the handles is provided because all printers cant handle the long bridge for the handles. The Bambulabs P1P could handle the handle bridge without problem but my V400…
I could not find a scraper sporting a hex pattern that was 2 sided, clearly this had to fixed. Perfect for scraping prints off 2 build plates, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to…
Strengthened roof and pillars with tire finger grips and a hex make-over. Now it's a strong, stylish, and useful tool.
A simple model that attaches to the side of the Original Prusa Enclosure. You can use the nylon rivets that originally came with the enclosure to attach the holder to the enclosure. You will have to press a little harder than usual to get…
The center hex is sized to fit on the turntable spindle. If you like the design, please post your Likes and Makes! Thanks!
Recently started with Gridfinity for my IKEA Maximera drawer. Since it's only 7.8cm high, I needed to find a holder for my hexscrapers which can hold it horizontally. surprisingly I couldn't find any to use, so I decided to remix one of…
A very interesting puzzle based on hexagonal sticks. There are three types of stick. You need to print 3 with 1 notch (hexstick1.stl). 6 with 2 notches (hexstick2.stl) and 3 with three notches (hexstick3.stl). the diamentions of each…
Printed with a 0.4mm nozzle, 0.4mm layer height and 20% infill.
This is just a scraper made by Visle with the head of The Rock added on it
Designed for HexScraper and Ikea Platsa cabinet system. As easy as print, place and hang. Print Instructions: Supports: No Brim/Raft: No Quality: 0,2mm or better Material: Anything that is not flexible. Infill: 15% or higher
Because small print beds need scraping too! I took the HexScraper, split it in half and added guide pins/holes to assist in putting it back together. The motivation for this was being able to print it on the Tina2, which has a smallish…
Hexscraper with the upgraded turtlehandle
Honeycomb storage wall holder for Bigtreetech Belter or HexScraper Print well with no support. Slicer may say that it has floating region and they're needed for it to work, …i think :)
The center hex is sized to fit on the turntable spindle. If you like the design, please post your Likes and Makes! Thanks!
Remix of Antman's hexscraper holder for HSW system. Made to be used with the hollow inserts. It's a snug fit, so scale up or down to fit your wall. Normal print settings for walls, infill, ect. Paint on supports are needed
Four Color Hexsticks - STC # 25-C A 12 piece puzzle with all pieces tangent to a face of a rhombic dodecahedron. There are 3 solutions to this puzzle (photographs included): No two like colored pieces are parallel to each other. All…
Hexscraper is little but sturdy icescraper tool to go in to your pocket when winter is at coldest. It can break even the hardest icecrust from your windshield, with ease… Compact size for best portability. Key feature is the blade, it has…
I remixed this HexScraper - Printbed scraper (with magnet) from Roland Deschain and added a longer blade to it so it is easier to get under your prints on your build plate.
A quick idea for a Last Meters (Metres) competition entry. I like to keep “swatches” of all the filaments I use, and I also like hexagons: so I came up with this design for interlocking swatches/samples, able to be printed with very…
A small hook to hold the HexScrapper from @visle which you can hang on the Bambu P1P Pegboard mod or any other identical Pegboard.
These antenna mounts are designed to mount the HereLink antenna's to a Hexsoon EDU-450 multicopter frame. They are patterned to match two of three holes set on the left and right sides of the lower plate. The mounts are angled to provide…
As was suggested this should be more suitable for thin prints removal.
Like the original, better print 0.15mm :)
Hello! I would like to start by saying that this is the first design that I publicly share, so feedback is welcome. I present you, The HexScraper - A multifunctional windshield scraper. Designed to be useful to most drivers, it has hex…
there is a flat side so you can print it without supports
By far my most used print is my HexScraper. It's a fantastic tool that I know won't damage my print bed. However, I kept losing the damned thing! This is a super simple attachment that just plugs in to the top of your MK3 Z axis holder…
A set of interlocking drawers designed to be easily printed with printers of any quality. Add a 6x2mm magnet to the back of the outer drawer, and a magnet into the drawer itself for assisted closure. Prints without supports!! Print…
These are designed to be exactly the same size as the cardboard hexs so that they can be packaged inside the box and so that no MMU is required if you want to do multicolour. They have slot for the number counters and roads, settlements…
This is a very simple but robust frost scraping/removing tool (ideal for car windshields). On one side, the angle is modest to maintain durability; on the other side, it is a sharp tool for difficult corners. The model is large (use…
This is my very last minute entry into the TPU Flex it challenge! Hope you like it! This model can be used for doors of any (reasonable) height from the ground, as it is pretty tall. Print Settings: Material : TPU 95A Infill : 10% Layer…
The distance between the inserts is 130mm. Use M3x5x4 brass inserts.
made for @visle hexscraper model: https://www.printables.com/model/122894-hexscraper-printbed-scraper
Ich nutze den HexScraper MINI w/Replaceable Blade von K2_Kevin sehr gerne. Auf seinen Bilden Sieht man den kleinen HEX-Button. Da ich diesen unbedingt auch drucken wollte, habe ich dieses Modell erstellt.
fast printable scrapper to scrap the plastik from the printbed
Fixes these challenges: If you want to remove the top plate to work on the “middle layer”, the whole drone just falls apart. If you use two thin nuts to hold the arm mounts and bottom plate together, you can then use nuts to hold the top…
A small Holder for https://www.printables.com/de/model/122894-hexscraper-printbed-scraper Use double sided Tape.
A 1x1 gridfinity holder for the visle HexScraper (https://www.printables.com/model/122894-hexscraper-printbed). Tolerances are extremely forgiving, so it might feel a little loose. I printed at 0.3 mm layer height with 5% infill on a…
A set of adapters that allow to use HexScapes walls and terrain primitives with MagHex
This model is a spinoff of the popular board game, Scrabble. Instead of the common square board where tiles can be placed left, right, up, or down, the Hexscrabble board is a hexagon allowing for more combinations! This adds a new…
Bracket to mount the Lightware LW20/C (SF20/C) to the Hexsoon EDU450 Drone Frame
Created this soap dish to catch excess water and soap dripping from Dial liquid soap bottles and staining countertops. Should be big enough for most bars of soap as well. Print with 3 or 4 walls on the base piece at 0.2mm layer height for…
If you like the design, I would really appreciate your Makes and Likes!
There are two designs, one for the HexScraper and one for the HexScraper scaled down to 60% in X and Y. The Flap part needs a little support as shown in the pitcher.
Hook for keeping your HexScraper in one place, simple as that
https://www.printables.com/cs/model/122894-hexscraper-printbed-scraper this is the HexScraper which is on one of the photos Print with supports
The scraper: https://www.printables.com/de/model/122894-hexscraper-printbed-scraper/files
HexScraper with hole inside for 12x3 magnet, need to pause just before the hole is covered to insert the magnet. HexScraper s dutinou pro magnet 12x3mm. Je potřeba výtisk pozastavit a vložit magnet před pokračováním.
1x4 - Horizontally holds two of Visle's Hex Scrapers
originally designed for the Qidi Xplus4 but this model should work with any 3d printer that has handles on top. This model uses a hexagon to hold the print bed scraper and an original design to latch onto the handle of the 3d printer and…
CZ: První verze držáku na HexScraper. Jedná se zatím o prototyp a postupně ho budu vylepšovat. Držák se umístí na zdroj tiskárny: Prusa i3 MK3, Prusa i3 MK3S, Prusa i3 MK3S+, Prusa MK4. EN: The first version of the HexScraper holder. This…
Don't let those audio waves go to waste! This silly gadget snaps on to your special omnidirectional computer speaker to redirect all those rad sound vibes in any direction you want. If you found this useful, it would bring me great joy to…
Hex Scraper Holder, the file with magnets uses 6x2mm magnets.
