Liczymy pasujące modele…
Cup holder replacement bracket for the Toyota Highlander 3rd Generation 2014-2019 with rear captain chairs and flip-down cup holder arm rest tray Part Number: 780610E010A0 Print Settings Printer: Bambulab X1-Carbon Supports: Yes…
Update 9/14/24 updated the files and added one with support that rest on the lower edge. Cover for a 2024 Toyota Grand Highlander Hybrid Drive mode button. When driving my arm is resting on console and I accidently keep hitting the drive…
2005 Toyota Highlander front cup holder spacer. This was made to replace the broken spacer in my 2005 Toyota Highlander so that two cups can be placed. Prints without supports
The drink holders seem way too big in my 2015 Highlander allowing drinks to tip over. I purchased it used, so maybe I am missing something that came with the vehicle. This print has worked out nicely for me. I secured it with some picture…
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/czGNmh0JVvM Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Whatever PLA Black…
This is a replacement cup holder swing arm for the Toyota Highlander middle row cup holder. NOTE: While this model may not perfectly fit the original part, it is designed to fit the replacement bracket available here on Printables . Thank…
This fits in the middle row cupholder space on a 2015 Toyota Highlander with captain's chairs. The bottom of the cupholders in the center table broke on ours, so this drops in the cupholder holes. This gets in the way of folding the…
When you have ladders/plywood/pipes/whatever hanging out your tailgate and it won't close, it beeps all the way home, and that's annoying! Insert this into your tailgate, the locking mechanism will grab it, and then it will shut up.…
🚗 Tesla Phone Mount (Model Y Juniper & Model 3 Highlander) Perfektní ergonomie: Telefon máte přímo za volantem v přirozeném zorném poli – ideální pro navigaci. OEM Vzhled & Stealth Design: Konstrukce zapadá přímo do větrací šachty a…
A friend of mine wanted me to make this for his 2013 Toyota Highlander, so this should work for similar highlanders and models in general. Printed in two pieces to help lock the USB port into place. I tried to make it parametric but I'm…
This is a replica of a replica sword. It is not , however , from the movie The Highlander starring Christopher Lambert. Other sword replica company's refer to this sword as coming from the original Highlander movie and states that it is…
The climate control knob on my Toyota Highlander Hybrid snapped off recently. Taking a closer look, it had a very flimsy attachment point and the break shouldn't have been surprising. Another friend of ours had the same problem. Toyota…
Highlander Gnome – Raise Your Mug, Guard Your Garden 🍺⚔ Bring a touch of rugged Highland spirit to your prints with this bold and battle-ready gnome! The Highlander Gnome stands proud with a frothy mug in one hand and a trusty dagger in…
This is a replacement hinge repair kit for the overhead sunglasses holder found in Toyota Highlander models from 2020–2024 . The factory hinge is a common failure point and not sold separately by Toyota , often requiring replacement of…
Introduction As a long term player and fan of the Video-Game “Foxhole” made by “Siegecamp” I`m proud to showcase the next Warden Armoured Car. The “Highlander” is a great addition to any attack force. Its manoeuvrable, speedy, brings a…
A slip on cover for a Toyota Highlander key fob. Intended for printing in 85a TPU. Print upright with a brim (for stability) Print Settings Printer: ender 3 Rafts: No **Supports:** No Resolution: 200 **Infill:** 20% Triangle Filament: any…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 Design Concept The Minature Highlander Cow model brings a sense of whimsy and charm, capturing the essence of a cute and friendly highland cow. The exaggerated…
Print PETG, 3 perimeters, 0.16 layer height, 60% infill gyroid
This is the sword used by Duncan McLeod, the Highlander, the movie series of the same name. I couldn't find a version of this blade online, so I made one. And now it's a desktop toy for your computer, when you're bored and need distraction.
This was designed using a 3D scan of the car's head unit to allow for a precise fit. Make sure your printer is dialed in before printing. I recommend printing from PETG at minimum, but ideally ABS. If using a lighter colored filament, use…
hvac control knob for 2016 toyota highlander may fit other makes/models/years if printed face down it requires no support
This is a reshell of a 2019 Toyota Highlander key fob meant for FDM printing with PETG. I made it when the plastic case of one of my own keys broke. You just take the PCB guts out and place it in this one. I have been using for a year and…
Make sure you use a heat-resistant material for interior of vehicle…I wouldn't use standard PLA. Nylon materials works great. Original nut this replaces is shown in photo. This likely works on other Toyota models.
For 2022 Toyota Highlander. This is a bracket that snaps into the lower vent cut-out to attach a phone holder such as an adhesive-backed magnetic holder. It extends downward enough to sit against leather trim for greater stability. Excess…
Files are organized by the colors as they appear in the photos. Obviously you can mix and change colors as you please or based on what you have available. The colored pieces are glued (I used hot glue, super glue would probably work as…
My 2019 Toyota Highlander dash has an area to toss things. This area also has a hole to snake a usb cable through. I'm upgrading to a carplay solution soon, so I made this magsafe mount to ‘permanently’ stick an Anker Magsafe charger…
HGN-IIC Highlander for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
Made these parts to fill the holes in my 2020 Highlander after removing the Qi charger from the center console. R part (passenger side) is for the hole left by the spring shaft thing after prying/twisting it out, this covers the damage…
HGN-732 Highlander for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
Recommend printing in ABS.
An adapter to hold the after market Hopkins 4-Flat Connector.
Just a keychain with a Scottish Highlander on it with the text Scott under it
6cm*2.5cm*0.37cm can be scaled as desired 2 models included: 1 with toyota logo on the back, 2 without logo. during printing you can change the filament to another color and the TOYOTA inscription will be in a different color.
This piece fills in the blank areas to the sides of an aftermarket double-din stereo for a 2002 Toyota Highlander. This should work on any Gen 1, 2001-2007 model with standard audio. (I do not know if it works with the Bose Audio…
Highlander's have massive cup holders. Here is a very rudimentary remix.
Somehow I lost the rear lift gate latch cover for my 2015 Highlander. I purchased one from Toyota for around $27. However I thought I would try to model one. This is what I came up with and it fits pretty well. There are two pics of…
Holds the sword securely to the wall and covers as little as possible. You can read the serial number near the guard so little is covered. 2 parts: Wall mount that screws into the wall Sword Holder that actually holds the blade and slots…
Tray liner to keep things from sliding as much. Based on the tray from cjolly3053 https://www.printables.com/model/985816-tesla-model-3-highland-2024-front-center-console-t/comments
Garfield Highlander Ring Figure STL is a collectible mashup character figurine that combines Garfield with a highlander theme for an easy to print 3d model. Use it for desk display, tabletop collecting, cosplay prop detail, or as a unique…
Highlander's have massive cup holders. Here is a very rudimentary remix.
This is a reshell of a 2019 Toyota Highlander key fob meant for FDM printing with PETG. I made it when the plastic case of one of my own keys broke. You just take the PCB guts out and place it in this one. I have been using for a year and…
This piece fills in the blank areas to the sides of an aftermarket double-din stereo for a 2002 Toyota Highlander. This should work on any Gen 1, 2001-2007 model with standard audio. (I do not know if it works with the Bose Audio…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kCQ4d8cxzM4 Category: 3D Printing
