Merkur Futur Shaver Holder Shortened
Just a shorter version of the original.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 5
Liczymy pasujące modele…
Just a shorter version of the original.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Small wheel for shortening this TV antenna . It's used on campervan, but can be used anywhere. Might need a bit of modifying, because the teeth don't allow the antenna to stay paralel. Printing instructions Layers: 0,20 mm but doesn't…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Horten Ho-229 WW2 Era German Flying Wing Fighter Jet
I recommend activating the border for printing because of the height of the model. I used maxim sachs' stl file found on thingiverse and made some modifications: - MK108 guns removed : - wingtip antennas removed : I noticed mesh bugs as…
I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…
Shortened 9mm to better match toothpaste tubes common where I live. Now fits tubes up to 60mm wide. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: Translucent blue printed in…
Dummy 13 Swords Shortened Handles resized 200% handles were shortened to fit better with hat accessories
Dummy 13 Swords Shortened Handles resized 250% shortened handles to better fit hat accessories
This is a remix of the Smol Bottle Opener where the part that pushes the cap from above is moved closer to the handle, creating a different lever angle. Printed successfully on Prusa Mini+ with settings: Prusament PLA Layer height: 0.2mm…
Shortened the mount. Print as usual. No issues. Trying to keep the footprint of the printer as small as possible especially since it will be going into a DIY enclosure soon.
Here is my simple foot or bracket for an Ikea LACK table with screw hole for use if you want to shorten the size of the legs. Ikea LACK table legs are hollow after the first 35mm from each end and need a foot or bracket if you want to…
Just a slightly shortened version of the original index grip. I removed about 2.5cm from the front to look better on shorter barrels without sacrificing the index finger grip. Use with the original grip key.
Shortened modifications of Flexi-Conda and Brick-Flexi-Conda models. Remix is based on several modifications of the original models - both variants of the flexible snake in 3, 4 and 5 link variants. The original model has nine links - so…
Sometimes your lamp needs to hang a bit higher. If cutting the cable is not the solution you're looking for this elegant shortener may be of help. In fact it makes a loop in the cable which is neatly covered up by a lid. The place…
I have some hanging lamps above my diner table but they're in the way when I want to fold clothes. I designed this cable shortener to be printable without supports, be elegant and to use little material. My cords are 6mm but the design…
This adds three changes compared to the one made by Dave: 1. Make it 6mm shorter (so it fits in the slot better) 2. Remove the bars on the bottom as they don't seem to be doing anything and are prone to breaking 3. Make the dock slightly…
The original didn't fit well for me so I shortened the spacer length on the L2 piece by 2mm.
Shortened length of end part to make it easier to connect. Simplified the design to allow upside down printing. Print Notes: Orient upside down. Use plate supports for snap lips. If you plan to print high temp filaments, print the…
SEE REMIX IF YOUR VULTURE KIT USES THE DRUM SPRING This is a full replacement for the entire front-assembly of the Vulture blaster. This means that every part of the breech, barrel, and magazine assembly have been redone. The only…
Remix of Petr Bravenec's design, shortened to fit my use-case. Mount hole dimensions are unaffected.
Note: original mod is https://github.com/VoronDesign/VoronUsers/tree/master/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber also found on Printables at…
The LCD mounts that shipped with the MK3S+ annoyed me with how far they stuck out past the frame. These mounts are 1/2" (12.2mm) shorter, allowing the LCD to sit closer to the frame and thus making the overall foot print smaller. All the…
Hortenwing/Prandtlwing: this "Wing" has twisted wingtips in order to solve the problem of "adverse yaw". This was achieved by reversing the "downwash" towards the wingtips ("upwash"). This way the aeroplane didn't need a vertical tail nor…
Shortened the original Dan Pistol by 50mm overall with a 25mm reduced draw to improve flubbing at low fps. Comfortably hits 100-130fps with small sections of k25 spring and a barrel flush to the shroud. Length Changes: Shortened: slide…
We found that with smaller amounts of grounds the portafilter funnel included with the Ninja Luxe does not let you tamp down as far as needed resulting in a sour cup of espresso. I've therefore created a shorter version that will let you…
Dummy 13 Big Gun Shortened Barrel Extended End resized 250%
Shorten cables for your hanging lamps.
Dummy 13 Big Gun Shortened Barrel Extended End resized 200%
I printed a bunch of eric-ao's safety locks for my own drawers but ran into a few cases where the gap I had was just too narrow. Simply height adjustments to make it fit in some tighter spaces more easily. Printed at .2mm layer height in…
This is a device for shortening the wire or cable of a pendant light. You wrap the cable around it and feed the ends trough the hooks. More turns, shorter wire. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
This is a handle that can be used to shorten a leash for walk-training a dog to help increase control and avoid buying a whole bunch of different length leashes. When dogs are young, they need a very short leash to learn to stay close by…
I bought from Prusa a second original spool holder in order to hold 4 spools at a time in my little enclosure. But original holders endpart are way too large for only 1 kg spools and take too much space in my expected configuration. So, I…
I had the same problem as one of the other commentors. Once printed, the frame was slightly too large to fit on top of the X1C. I removed 1.5mm from each of the rear pieces between the last vent hole and the corner. The glass still fits…
Remix of Jallims Handle V1 with a bigger gap between shelves for easier sliding
Lamp cable shortener for a 6mm cable. Feel free to design some inserts for the inner diameter.
This is a replacement for front shortened mudguard for Triumph Thruxton for a sportier look. Should be printed in ASA for UV durability.
Angle the model on the print bed and it will fit a typical prusa MK4 style print bed. See original post for the rest of the model.
This is a modified version of the Tesla Model Y rear seatbelt guide (original model: https://www.printables.com/model/251256-tesla-model-y-rear-seatbelt-guide ). The original model had a length of 264mm, which exceeded my printer's 260mm…
2.5mm worked best after my measurements, If someone needs a slightly different size I also added 2mm less and 3mm less.
I shortened the Center Dock by 5mm, because my DragonBurner Toolhead with the integrated ZeroClick Mount didn't reach the parked probe fully.
I extended the length of the original model to shorten a cable for around 40cm
Hello everyone! This is a 3D printable Nerf N-Strike Barrel that I have designed to resemble a shortened Nerf Recon/Retaliator Barrel. I’ve always loved the look of the N-Strike line of blasters, and arguably the most emblematic part of…
extender of the overly short inaccurate JoyCon thumb sticks. this is a shortened version of an original design. the original version is grate if you like long thumb sticks. How ever I did not like them so i shortened them. Recommend…
Chopped about 10mm out of the middle of the models in 3D Builder. The Die holders are slightly taller due to the orientation. The original author made this for a Craftsman set. The Harbor Freight Metric/Imperial sets appear to fit nicely.…
Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…
This is a headphone cord wrap specifically designed for the Bose AE2, but should work with any cords that are ~1.7-2mm in diameter. I find the stock cable way too long and this was an easy solution. When importing into slicer, I suggest…
A watch band shortener tool remixed from two designs that requires only a metal pin. In picture a 1cm needle part is used (half of it goes deep inside to keep it firmly) which works really well. You need a base, pusher and a knob. There…
Skadis connector threaded shortened made to fit with https://www.printables.com/model/282684-ikea-skadis Threaded for M4
This is a handrest for the SpaceNavigator Desktop edition. Your SpaceNavigator won't move around anymore when using it! I made DarthBane's model a bit smaller so I could print it on my Prusa Mini. You can either cut the pad out of foam…
About I remixed the router attachment brackets from ayanev ( https://www.printables.com/model/249532-ikea-skadis-wifi-router-attachment-bracket ) to allow for mounting without screws. I shortened the wings to fit some of my smaller…
Shortened version of the bottom part of the original model from @TomekZimoch to fit on the Prusa Mini.
Printed in ASA. Printed 12mm camera mount screw to attach camera, but not necessary. Camera fits tightly.
AX24 - Shortened Aftermarket Servo Mount - Remix Shortened Aftermarket Servo Mounts for the Axial AX24. A couple of mm was trimmed off of the front of the original, moving the servo closer to the center of the vehicle, which seemed to…
Howdy, still a learner at 3D modelling, I have today my attempt to create a shortened more pistol like variant of the DC15 blaster pistol from the OG Star Wars Battlefront games from 2005. This is my own design using the game blaster…
I've shortened the end caps for the repwinder. For the locking screw version, I removed the ratchet as that should only be needed on one side. I then shortened it by 0.8mm. For the other end, I also shortened it by 1mm, and left an indent…
This model will shorten your cable by 28cm
This is the same model, but shortened by 15 mm to fit in size for 220x220 tables (like Sapphire Pro).
I had to remove 2 links of the drag chain that came with the SV08 enclosure kit due to the length of the stock cables. This prevents the Z gantry from reaching the last few mm of Z axis height without popping out the stock drag chain…
I liked the original model but i wanted to make a smaller one to reduce time and material used.
This remix provides a shorter version of the “d1 gear and axle” that is part of the “Orange D-Axis and C-axis” folder for the Antikythera mechanism. When I assembled my clock, I found that the d1 axle stuck out the back of the D2 gear and…
After i added the MMU2S to my MK3s i needed another Lack-Table to hold the Spools. I want to store the spools underneath the Printer with a drawer for easy access. As i dont need the full lenght of the Lack table i will shorten the legs…
Shortened to fit on a 300mm bed.
For whatever reason, some printers are about 25mm shorter between the IFS and enclosure hole. I shortened it to fit.
a Horten HO 229 kit card, glue required
T300 hall sensor, shortened version
PC4m10 rear connector threads for the MMU3
Print with whatever layer height, 40% infill, 2 perimeters minimum, I recommend HTPLA (PLA+ / PLA Pro), but PETG and other slightly flexible filaments should work too. I have not tested in standard PLA. Assemble by sliding the two halves…
dkrnet's original Cereal Box Filament Spool Roller is an amazing design; however, the stock base was just a little too tall for my Safeway-branded 15.3 cup cereal box. Thankfully he uploaded his original STEP file, making shortening the…
Shortened the original model in CAD. The jpg shows you how to print it with minimal support. Category: Office
For a 3D printer table I wanted to use 2 Ikea Lack 50x50 tables. 2 times 45cm height would be a bit too much, so I shortened the legs of the bottom one of the two tables. In order to regain stability and for leveling the setup, I designed…
I modified the original version to allow a bit more space to work with Nadir's CN3D shrouds. To work with the M12 probe. Print in ABS. It will use the same hardware as the original design.
(See original source model for printing instructions.)
I've cut off the IKEA LACK legs to 10,5cm and have inserted these feet at the bottom of the legs. My printer might have been a bit out-of-sync when printing so the dimensions might have to be adjusted a bit. If you print it and it doesn't…
Brought the ends in 4mm so that the spacer doesn't hit the case in the middle.
Modification part. for Dollfie Dream III body. shortens the torso by 5mm to reduce the waist seam gap, and give some variety
The original Smiley Blaster stock was a bit too long for my 8-year-old, so I created a shorter version in Tinkercad
I had to shorten the original model by 2.6mm to fit my V2.4 300x300; please measure twice before printing. 29
Remix of: Fully 3D printable snow shovel-ice scrapper by Ematyk | Download free STL model | Printables.com I shortened the extension piece and the shovel head to fit in a 256x256x256 build volume in printers like the Bambu Lab X1 & P1…
See original model. When and if the original creator will upload a shortened version of his own design, I strongly recommend using it instead of this one, since I retouched stl files in a rather rough manner. His work will probably be…
Shortened the original model and made the rack mounts slotted to allow some wiggle room.
I had a problem with a lamp hanging too low so I was hitting it with my head all the time. Grew tired of it… so enter a ceiling lamp cable shortener.
just shortened the claws so the can be printed on a 200x 200 print bed but still fit in handle
Prevents the cushions from sliding/creeping forward.
Uses RedCowl's fantastic barrel collet dev kit for barrel retention: ( Link ) The two big parts print muzzle-down. The lid (green) prints with the rearward-facing angled side on the bed. The little yellow hook prints on its side. Rail…
Shorter Godox Bulb Cover, specifically designed for DPIIIV Series Studio Lights. Likely compatible with many other Bowen mount compatible lights but I unfortunately do not have access to them to test. These were specifically designed with…
English version below the German description. Da die Führungen/Flügel beim Original, bei größeren oder zu vollen Spulen an der Rolle schleifen, habe ich nach der Original-Vorlage diese in SketchUp neu gezeichnet und die Führungen/Flügel…
Print in 100% infill with ASA for UV resistance. You will need to buy alternative nut to secure the part to the rear indicator housing. The original version showed in the picture is may block certain hard/soft panniers luggage which…
UPDATE 1: Added tighter fitting lid. This FFC Barrel allows you to shorten any flat flex cable no wider than 16 mm to the desired length, without cutting the cable. It includes a small hole in the bottom which allows you to fix it in the…
Overview and Background My lamps were hanging too low, however I didn't like to cut the cord shorter because I wasn't sure about the optimal lamp height. This was more fun Edit the cord thickness or remix in general at Onshape
I found the original axis to be too long. This shortens the axis by 1mm, making the unit feel nice and solid.
This shorter Masuter Pro Y axis belt tensioner extends the stock Y axis work area up to 430mm. You will need: Longer belts Print 4 of them 4 M5 hex nuts Flip both Y end stop brackets on the frame by 180 degrees Move the front cable chain…
A simple shortened case foot design to let the Thermaltake V21 fit inside an Ikea Kallax or Expedit shelving unit. There is enough room left to put adhesive felt furniture pads on the case feet to reduce vibration and prevent scratching.…
I was having y-axis collisions, so I remixed M3D's mod of Rons' tensioner and the one-piece holder. My remixes are here - the tensioner and the holder (this model). After installing my modified housing I did not actually need this…
I shortened the fixation part to accomodate stiffening mods of the playseat challenge with it Here are the mods I am talking about: Brace https://www.thingiverse.com/thing:4944013 Joint Stiffening https://www.thingiverse.com/thing:2772442…
I really like the original design. But my ERCF is not mounted on a Voron so I shortened the legs for a general design.
All my printers are in LACK enclosures with Drakka01's excellent Pocket Doors , but the MK3S(+) printers stick out a bit too much to close the doors completely, if you want to have enough space in the back for the heat bed cable. I…
The location of the of the BLtouch sensor was a bit too far to the right for my liking. I've shortened the arm a little.
This is a remix of Kabliga's genius insert for Switch game boxes, shortened by 1.8 mm. I had to make it shorter to fit in my original Nintendo Switch game box. Despite my printer is dimensional accurate the original design won't fit.
(Almost) universal filament guide A bit of backstory I bought my first 3D printer a few weeks ago, already thought about and made some upgrades to it, but this is the first visible one. As a lot of you, I was tired of seeing my filament…