Garden watering can sprinkler / Kropítko na zahradní konev
Garden watering can sprinkler / Kropítko na zahradní konev
- Pobrania
- 535
- Polubienia
- 69
- Ocena
- 5
498 modeli
Garden watering can sprinkler / Kropítko na zahradní konev
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Tool to safely remove air from tires for long term storage while holding cap. Inside is threaded to standard Schrader thread. Will easily remove air from tires, allowing for storage or compacting of tires. I have tested this on bike…
PETG 4 perimetry 0.2mm vrstva při tisku více objektů použijte v PS volbu “dokončení individuálních objektů”, odstraní se stringy
I wanted some custom valve caps to protect my car tyre valves. I had used some metal ones before but they got welded to the valve so I wanted something plastic to prevent that but also hex headed so that if it did get stuck I could get a…
CZ: Můj pokus o náhradní kolíček k sušáku IKEA PRESSA. Ačkoliv se nejedná o remix, podobných modelů najdete spoustu. Místo problematického “ohýbacího místa” se otáčí kolem osy. Print-in-place tisk, celý kolíček i s čepem a otvorem se…
not tested yet I would be very happy about a Make, Like or Share! Happy printing!
Replacement for a broken hook for hanging the "Nilfisk Multi 20T" vacuum cleaner hose (maybe usable also for other types, but I haven't verified it). Náhrada za ulomený háček pro zavěšení hadice vysavače "Nilfisk Multi 20T" (možná bude…
Náhradní packa na kočičí wc Savic Nestor XXL.
Náhradní nožky pro M1T290 / Replacement M1T 290 feet Tiskové parametry / Print paramers: Podpory / Supports: Pouze na podložce / Heatbed only Výplň / Infill: 30%
Použití filamentu jsem zvolil PETG, protože jako začátečník mám obavy z pokročilích materialu. Doporučuji pro pevnost přidat více perimetrů. Tišteno bez podpor Vnější Průměr je 55 mm( stolu ) a vnitřní je 38 mm ( slunečník)
Náhradní pant pro digestoř Mora OP 610W. Cooker fume hing for Mora OP 610W.
Náhradní díl pro venkovní sušák na prádlo Vileda
spare part for the bathroom, shower holder
Náhradní díl do lednice miniledničky na mléko značky Lamanti - dveřní zámek
spare part, toilet, flushing
Print your own valve caps for your car and bike. This cap fits a standard Schrader valve. These caps have more threads than normal, so they stick better, and you don't loose them. -Print with 0.1mm layer height for good detail -Add a 10mm…
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…
I can't find the original file I used to create this Valve Cap. It's an emoji, open source - right? Print Settings Printer: Qidi Tech x-One 2 Rafts: No Supports: Yes Resolution: .10 Infill: 15% Filament: Hatchbox PLA Gray Category: 3D…
This tool can remove the valve core from Schrader-style valve stems. These are commonly found on mountain bikes, car tires, HVAC, and water rocket launchers . As this is a plastic tool, it cannot match the strength of a machined metal…
Deutsch Ich habe ein aufblasbares Bodyboard. Das ist gut für Flugreisen, aber die Pumpe ist zu groß um sie mitzunehmen. Deshalb habe ich einen Adapter auf Schrader-Ventil (Auto-Ventil) konstruiert. So kann ich das Board auch mit einer…
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
Description: Never lose your road bike pump adapter again! This 3D printable keychain holder keeps your Presta to Schrader (AV to SV) adapter securely attached to your keys or bag, so it’s always ready when you need it. The actual adapter…
Easily top up tubeless bicycle tires with sealant through the valve using these 3D printed funnels. No more spills or blocked syringes! I provide funnels for both Schrader and Presta valves. More info and Fusion and STEP files here.
This small grommet allows you to use a presta valve in a Schrader valve hole without cutting or herniating the stem. I use Schrader-ready rims on all our touring bicycles because in the middle of nowhere, you never know what kind of tube…
This model was inspired by the iconic Darth Vader helmet from Star Wars, combined with a Schrader valve cap for a unique and fun twist. Whether you're a Star Wars fan or just looking for a cool and functional 3D print, this cap is the…
Who hasn't lost one of these... fortunately we can just print us new ones. The first time you use them they will most likely fit a bit tight. It's best to use an old valve for the first time. Added the fusion360 file. So if someone wants…
My bike trailer has these *** Dunlop valves that are the worst. This adapter stays fixed to the valve(s) and makes pumping air into the tyres much easier. Printed in PETG, 0.4 mm nozzle, 0.2 mm layer height, only perimeters, arachne
A tool to remove or tighten the service valves (Schrader valve) of cooling-/ heatpump systems. My standard tool is sometimes too big to use it properly. But it should work on the valves of tires too. I´ve printed it in PC, because in my…
Simple model of a schrader valve. The thread of a schrader valve is not standard for Fusion360 so you'll need to add a custom thread. Enjoy!…
Rotunda sv. Martina je nejstarší dochovanou rotundou v Praze. Je skoro tisíc let stará, přežila husity, Prušáky, požár, i asanaci při stavbě vyšehradské pevnosti. Využívala se během staletí jako skladiště střelného prachu, dílna,…
Pokud se vám stalo, že se vám v průběhu hraní si se stavebnicí Boffin 100, 300, 500 nebo 750 poškodila vrtulka nebo „kříž“, na který se vrtulka nasazuje, tak si můžete stáhnout přiložený model vrtulky, „kříže“ a můžete si je vytisknout…
Another in a continuing series of custom valve caps. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4DNjFG049Vl Print Settings Printer: QIDI X One 2 Rafts: Doesn't Matter Supports: No Infill: 15%…
Many thanks to Rion3d for test and picture I would be very happy about a Make, Like or Share! Happy printing!
This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…
I needed a connection between Schrader pump hose to any common BSP male connection. I designed for 1/4 BSPP and printed one. BSPP connection is tight. You might possibly need pliers to connect it. This is designed in Solidworks, I also…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker There are two variants, one is a standard valve cap and the…
A bunch of different valve caps that fit onto standard schrader valves. I suggest that you print them at 0.1mm, to capture the detail in the threads. Category: Tools
Náhradní figurky do hry Carcassone
If you are a maker with wheels then you want appropriate valve caps!
Kropítko na zahradní konev průměr 34mm - Sprinkle for garden watering can diameter 34mm
Includes proper Schrader thread. Add s small brim if necessary.
Kropítko na zahradní konev průměr 25mm - Sprinkle for garden watering can diameter 25mm
Disclaimer I unfortunately don't have access to other types of valves as of right now. I will be looking into adding more in the future. Tested Print Settings Material: PLA+ Supports: None
I recommend printing this in ASA (or at least ABS) for the best outdoor longevity. I printed mine in Polymaker Orange ABS, 0.25mm nozzle, 0.06mm layer height, 20% grid infill.
Custom bicycle valve caps for your ride. The threads are built in to the dice. Print, Plug and Play. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kFStzLcNeOh Print Settings Printer: Qidi Tech x-One 2…
Halter zum aufhängen und Transportieren von Kinderfahrrädern.
I recently posted my "derSchraderFlatter" Schrader valve deflator - a screw on replacement for a tire valve cap that holds the valve open so the tire can be deflated when needed for service without the need to manually hold it open with a…
A simple pumpkin valve cap Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: AMZ3D PLA Orange Notes: No supports needed you can use a brim to keep them from running…
Simple adapter for Presta style values to be used with Schrader pumps/air compressors. Added a clip to attach to my pump/compressor hose so I don't lose my adapter (again)!
I accidentally ordered Schrader rims, but didn’t have Schrader tubeless valves kicking around. I have some excellent 76 Projects Hi Flow tubeless valves, and the top of these valves is big enough to seal against the Schrader-sized 8mm…
I had some glow in the dark PLA filament left over from a super secret project and decided to do something different, A Valve Cap! This was cheap filament I purchased from China, but it does a great job in my QIDI. I went ahead and heated…
My wife was looking for valve caps for her new car and I promised (weeks ago) to try to get something that'd interest her. Weeks later, I stumbled upon the Parametric Tardis model by Gossamer and I barely had to do any modifications. I…
For better visibility you can change filament color on marking. Created with OnShape:…
Use these nozzles with a standard ball pump and a Schrader pump for filling vessels with a wider hole (6.5mm - 11mm). I printed this with a layer height adjustment. 0.0mm-8.0mm was printed with 0.1mm. The rest was 0.2mm SPEED on the…
Siehe auch " Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model “Schrader valve cap with tool ” Vor allem am Vorderreifen unseres Elektrorollers Mi 3 ist es sehr schwierig, die Ventilkappe zu…
Two cap models ready for use as well as a thread that can be used to make your own cap. Works for most car and bike tires. To make your own valve cap: Find whatever model you want to make into your valve cap. Use the thread model as a…
Valve cap (Schrader valve) Print settings: 0,1mm layer 4 walls no supports
A lego-style head and helmet designed as a car/motorcycle/bicycle valve cap. This is oversized so about twice the size of genuine lego minifigure parts. Print Settings Printer Brand: Creality Printer: Ender 5 Supports: Doesn't Matter…
Based on the Wheels Manufacturing PSS-1 , whose measurements are posted as follows: Length: 11.4mm Outer Diameter: 8.2mm / 9.3mm Inner Diameter: 6.15mm I guessed the flange to be 2 mm tall. First print came out too small on the ID & the…
I had Hatchbox Wood PLA loaded, so I had to make a peanut. I have also creates a Presta version as I'm starting to do with all of my valve caps going forward. Print Settings Printer: Qidi Tech x-One 2 Rafts: No Supports: Yes Resolution:…
This safety knife can be used in many ways when gardening, but at the same time there is no need to constantly uncover and cover the blade. It protects not only the user, but also, for example, small children who might accidentally get…
This is a quick hands-off air release cap for car tyre, simply twist the cap on top of the tyre valve until you hear a hissing sound to release air in tyre. This is convenience for when you are in a hurry and need to release all air in…
Put some originality on your bike with these original valve caps. Designed for a Schrader valve. Update 18/09/22 You will find the V2 model (STL, 3MF, STEP) which has a reinforcement on the thread part. And it is more practical to screw…
I remixed this valve cap to have threads. I just wanted to be sure that the caps remain on my bike without the possibility of them flinging off. I just added a second file for a slightly larger Stormtrooper. (file 2) ...and, I just…
Prints well without supports in the model's orientation in PLA. Simply thread the threaded end onto whatever you want to pump up that has a Schrader valve, then plug the hose from the Intex Quick-Fill onto the other end. The fit is…
This Traffic Cohn is for my friend Allison. She's gonna love it on her cruiser bike. Inside joke. I use supports for almost everything I create. I will eventually build the treaded area so that supports aren't needed. I let you know when…
Remember to print at low layer height to get reasonable definition for the threads.
Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08…
Schrader tire valve deflator tool. Use to deflate tires that have a Schrader valve. Just screw down until you hear the air rushing out. Recommend printing at a layer height of 0.08mm to help ensure the fine inside thread prints. Check out…
More than one person has occasionally lost a part of a board game, and when it's an expensive board game like in this case, that's where 3D printing comes in and... 🙂 All the pieces are printed without supports. For the best visual result…
EN: I created button of center console for Skoda Fabia 1 . I wanted to created original phone holder, so I use parts from non-functional old phone holder, did some changes in my button model, print it, and so far it works! Left , middle…
Valvecap french bulldog (Schrader valve) Print settings: 0,1mm layer 4 walls organic tree support 25°
Vybavení malého stavědla, aby po rozsvícení uvnitř modelu na kolejišti “něco” bylo. Páky hradla jsou připraveny k navlečení na strunu, která leze z trysky 0,4 mm při výměně filamentu - při správném slepení lze s pákami pohybovat. Tisk…
Náhradní mřížka na zahradní domeček. Ideální pro rozměr 198x78. Díky přiloženému modelu je však velmi jednoduché upravit rozměr pro jiné rozměry. Doporučený plast je UV stabilní ASA, nebo podobné.
Replacement schrader valve cap for cars, motorcycles, and bicycles. Print it solid, no need for supports. I didn't model interior threads so that when this is installed the valve will cut its own threads. This allows for a very snug fit…
Description This is an adapter that converts from a female Schrader valve into a WD40 compatible adapter if the WD40 can has run out of air but still has solvent. There are 2 versions: One without threads and one with threads. Use the…
Nožičky k brýlím na čtení. Tisknuto materiálem ABS. Po vytištění lze materiál vyhladit acetonem. Otvory na nožičkách protáhnout vrtáčkem a celkově dopasovat.
Náhradné umelohmotné diely pre skrutkovaciu svorku doporučujem tlačiť PETG, ale dobre sa osvedčilo aj TPU. Musí to byť tesné, aby sa to nestrácalo.
Basic Informations Description Language: DE, ENG Configurable: YES DE: Das besondere dieses Adapters ist die Konfigurierbarkeit. Mit nur zwei Werten können Sie den notwendigen Adapter im FreeCAD frei anpassen. Der maximale Unterschied…
Rychlospojovací spojka pro zahradní hadice
Simple remix for use as a schrader valve cap. Category: Other
EN: This is a sprinkler for garden watering can diameter 34mm. This sprinkler can be screwed, it can be cleaned of dirt. Material: ABS or PETG Printing: with support (better are maybe tree supports) CZ: Jedná se o kropítko pro zahradní…
Chemická kotva - šroubovací hlavice pro aplikaci hmoty. Vnitřní šnek by měl zároveň pomoci mixování dvou složek. Tisk bez podpor. Doporučuji co nejmenší výšku vrstvy pro snadné zašroubování (já tiskl 0,12mm layer height s 0,2mm…
Náhradní držák pro spodní koš do myčky nádobí značek AEG, Zanussi, Electrolux. (více typů) Jedná se o velmi namáhanou část myčky ( teplo a tlak). Po několika letech tato část zkřehne a začne se rozpadat. Tato náhrada je velmi levná a…
Rohy mají varianty bez podpor a podporami. Model má malý rohový převis, tak jsem malé podpory zakomponoval přímo do modelu. Je pak potřeba vzít malé kleště (štípačky) a vytrhat je ven. Je to vidět v 3D view tady na printables. Originál má…
🏒 Náhradní díly pro stolní hokej Chemoplast 📦 Popis Tato sada obsahuje 3D tištěné náhradní díly pro klasický plastový stolní hokej od firmy Chemoplast . Díly jsou navrženy tak, aby plně nahradily originální součástky, které se časem…
Recommend .1mm layer height for accurate threads. PETG or ASA for outdoor durability. Icons are optional. Users have reported needing to scale by up to 1% for proper fit. Update 2025/01/02: Added a longer variant for vehicles with TPMS…
Nahradni díl dřevěného kolíčku na prádlo
Print this out of TPU for a push-on pull-off tire deflator. The horizontal hole allows it to be put on a key ring for convenience. I'm using the tpu95-hf from Polymaker with a 0.6mm nozzle. The larger nozzle reduces back pressure and…
Rohová spojka k zahradnímu stanu 3x6m
Tištěno na Pruša MK3s, 0,1mm, 15% infill PLA naležato Jako fanoušek zrádců jsem nadšen, vygenerováno dle originální hole, výška na fotce 18.3cm v měřítku zmenšení na 10%
Náhrada 9V baterie za baterie 13350 z jednorázové elektronické cigarety bez další elektroniky. POZOR na polaritu článků! Články nabíjím v externí nabíječce. Při plném nabití je napětí 8,4V. 9V battery replacement for 13350 batteries from…
I've been hankering to make a small novelty valve cap for a while and figure why not a cricket ball?! This is 20 mm in diameter and has some tiny tiny details for the seam so make sure you use some fine slicer settings so they don't get…
Needed an adapter to fill my pool with air. This is a lot quicker with an air compressor than with a foot pump. Other designs didn't work out as I expected them, so I created this one within a few minutes. Best printed with TPU and 15%…
I cannot for the life of me, find the original file I created this from. Sorry. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/dV1HtM3Sw3e Print Settings Printer: Qidi Tech x-One 2 Rafts: No Supports:…