Liczymy pasujące modele…
Does not require support material Print with back face (power cord plugin area) on the print bed
Wydruk około 3,60 €–4,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the AOC-STGN-I2S v2 bracket designed by simbaja. His model was made for the M720q however I have a M90q which while very similar they changed the bracket area on the M90q ever so slightly causing the original design to…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Hook your Nitecore Charger on to wall or bench out of the way and always accessible. This version is for Nitecore charger i2 version 2014
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Samsung Galaxy Z Fold 7/8 Ultra Wireless Charging Dock UPDATED - Fits the Galaxy Z Fold 8 Ultra also. I love my Samsung Galaxy Z Fold 7, but I couldn't find a nice charging dock that would allow me to charge my phone in the “unfolded”…
Rebuild from @Thomas_63847 model
Frame for 0.96-inch OLED display module. The bottom support at the sides ensures that the resistors do not stand out.
Case for Arduino Uno + LCD16x2 with I2C Print instructions Unassociated tags: lcd 16x2 i2c Category: Electronics Summary Case for Arduino Uno + LCD16x2 with I2C Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
These are the Case with I/O slot cover for the RaspberryPi2/Pi3. It can be fitted with a 40mm fan. Type A is the normal Case. Type B is the flat Case with screw hole. The upper Case is common to A and B. See this site for more…
Although several designs exist, I wanted a minimalistic one, so I designed one myself Requires no additional hardware, LCD fits snuggly in the casing. Casing clicks together. Requires some supports for better result ( supports for the…
Kryt pro I2C displej 16x2: https://arduino-shop.cz/arduino/1570-iic-i2c-display-lcd-1602-16x2-znaku-lcd-modul-modry.html Print Settings Rafts: No Supports: No Resolution: 0,15mm Infill: 15% Filament: Prusa, DevilDesign PETG Post-Printing…
Sun visor clip for a 2010 Hyundai i20. Will probably fit other models but I have no idea. I believe this to be to part number: GETZ 8523505100OM 85235-05100OM Best to print in PETG, ABS or ASA for heat resistance. A car's interior can get…
Remake based on the work of https://www.thingiverse.com/niknolte/designs https://www.thingiverse.com/thing:4684139 published on thingiverse : https://www.thingiverse.com/thing:5322163
Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…
1602A / I2C LCD Display Module - 16 X 2 Text LCD - I2C CTRL Adaptor included Buy from Amazon here!
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
Hi, I made brackets to test my Sovol SV06 Plus with Portable Input Shaper from FYSETC. This specific one is slightly easier to use - requires only USB-C and flashing firmware to it. There were no brackets available for SV06, so I decided…
Has marks for adjusting B tension on 30t and 34t cassette cogs. The top of the gauge is for 28t cassettes. Replaces the paper gauge that comes with the derailleurs (Shimano “GG Adjustment Gauge” Y3GK89600) and I have added a lip to make…
All printable parts for your RepRap Prusa Mendel i2. Source: https://github.com/josefprusa
This is a case for a the M5Stack i2C Cardkb keyboard. Materials: Cardkb - https://shop.m5stack.com/products/cardkb-mini-keyboard-programmable-unit-v1-1-mega8a Silicone Cover - https://etsy.me/4dS4H8G PLA
This is a very simple bracket to install a dual i226-v network card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins and weld in…
I haven't printed this last version of the part with all the switches, yet. Please share your results if you print it. Don't forget to like and comment. This collective grip has: 3x axis 1x 4-way hat switch 4x press-buttons Print: Printed…
This mounting plate is designed for a 128x64 OLED display prototype board. It was designed to fit the part on Amazon with the ID “B09T6SJBV5”. The Fusion 360 file has been included which should make it easier to work this into an existing…
A bracket to mount a SCSI2SD adapter (version 5 and newer) into the expansion card slot of a Macintosh SE or SE/30. Allows for much easier access to both the SD card slot and micro-USB port. Version 1.2 of this bracket features tweaks to…
Hey, i designed a easy cap for the INMP441. If you want to fixate it, just use hotglue or similar. Leave a like if you like it ;)
I previously had a Scarlett 2i2 Gen 2 mounted under my desk with the mount from ziller88 . After the Interface died i bought a 2i2 Gen4 and modified the mount to work with the new interface. It comes in 4 Versions: Scarlett 2i2 Gen4 desk…
Simple sliding lens cap for the UTi260B thermal camera to protect the sensor better. The camera ships without case or lens cap and I felt that it needed one. while designing additional close-up lens holder I drafted the profile of the…
Remixed model of sternli27's design for use with cheap bulk connectors from china. Follow stenli27 designs for amazing ideas using these battery adaptors. Currently working on a low profile affordable and easy to source solution for…
I print with PETG 0.15mm and 100% infilled
The Dell Wyse 5070 is a thin client with two DDR4 SODIMM slots one M.2 PCIe slot, and one M.2 SATA slot. Typically the PCIe M.2 slot has a wireless card installed, but I wanted a second Ethernet port so I could run opnSense on the machine…
As many people probably did, I saw a video and some blog posts recently touting the MI25 as a secret beast for AI image generation, especially since you can get this 16GB card on eBay right now for under $100. As a server grade card, it…
A very simple Stand for an Anker Zolo Qi2 wireless charging pad with a simple frichtion/press fit. Just push in the pad from behind it then ever-so slighty sticks out so the phone does not rub against the stand. I'm using this with a…
All holes are 3mm. Inspiration: https://www.printables.com/pl/model/199471-1602-lcd-screen-holder
Je ne trouvais pas de supports pour les Focusrite Scarlett 2i2 3rd Gen donc j'en ai fait un car ce modèle est bien plus petit que ses prédécesseurs. Je me suis inspiré de ce support https://www.thingiverse.com/thing:3647280 pour faire…
This is a bezel with press pad for 0.96" 126x64 I2C OLEDs (about 25,3x26mm) that can be mounted “hole only” (5 holes) on a panel. M2 screws with washers and nuts are used for attachment.
Ideal case for Raspberry Pi 2/3 along with dual MMDVM hotspot. Printing without supports, Infill: 15%. Share your printed model.
Template for hinge fi26 and fi35. Print instructions Category: Hand Tools
Adapter to fit the Di2 battery into a non compatible seat post. For a seat post with an inner diameter of 21.8mm 3 o-rings (17x2) give a good fit.
Saw the Fallout-style retro terminal design of Arthur Guy ( https://www.thingiverse.com/thing:4567037 ) & Mike Tong ( https://www.thingiverse.com/thing:4808443 ) some time ago, and felt that was very cool. So to make another one for the…
Right rack mount for Topton N100 i226-V Mini PC that takes only single 1U. One original bottom screw replaced with M3x40mm. Holds device in place. Printed from ABS with 0.2mm layer, 40% infill, 4 perimeters, 5 top/bottom layers. Design…
This 3D printed bracket is designed to mount a SCSI2SD to the 3.5" hard drive bay on vintage Macintosh computers. It works with both SCSI2SD v5.1 and v6 models, and has been tested with the Macintosh SE, SE/30, Classic II, LCII, and…
This custom-designed 3D-printed enclosure is made for the ESP32 4-channel relay module , ideal for controlling low-power devices in your home or workshop. The design includes space for status LEDs and physical control buttons to manage…
You can use this model to mount you FOCUSRITE SCARLETT 2I2 under the table. Category: Music
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and 3.90mm and use a prime pillar
These little OLED displays are super-useful. But mounting them into an enclosure means cutting a really neat rectangular hole, which I find slow & tiresome. This bezel holds the entire module on the outside of the enclosure, and fits with…
Large version of my Mi24 wallart, precut to fit MK3 printbed. Also included is orginal scale file
Snap fit for the screen and rear cover, M2 screws for the ESP32 board. Supports needed. Left and right side cable routing options. DHT22 → GPIO4 SDA → GPIO21 SCL → GPIO22
Focusrite Scarlett 2i2 - Vertical Stand.
Remixed Raspberry Pi 4 Case for use with the new Bigtreetech Pi2. I also made a low profile DIN rail clip that uses a couple rubber bands for retention. I used this type of M3 self tapping wood screws , I personally think they work about…
Extruder visualizer Prusa mendel i2 style. No glue, No support\ It needs 3 magnets (8x3mm) to work.
Clip to attach Shimano Di2 cables to the brake lines
Conventional 16x2 character LCD displays with hd44870 controllers are huge. They get even bigger with a PCF8574-based I2C module attached to their back. Buydisplay.com sell the EastRising ERC1602-4 LCD series with a chip-on-glass (COG)…
I was building an Allsky camera and I needed a way to mount a ZWO ASI224MC to the underside of the enclosure. The TinkerCAD OBJ file has been added if you want to modify
Single piece wallart of Mi24 military helicopter. Also included is orginal scale file.
This is a battery mount/shim to fit a Di2 battery in the seatpost of a Colnago C64. The wall thickness of mine is quite variable and there are seams, so I made two versions to test the fit, and have uploaded both. What also might work is…
Designed this little gardening helper for my girlfriend. She loves it. It's great for indoor gardening. It can be used to spread potting soil from a large container into small pots. Particularly suitable for seedlings or small plants, as…
I recently get the latest BTT PI2 and create this case for mount it to voron 2.4R2 din rail You will need 4 M2.5 20mm screw for secure the case though raspberrypi_bracket v2 Or, M2.5 12mm for without the bracket The raspberrypi_bracket v2…
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
This mounts a Focus Scarlett 2i2 audio interface (3rd generation) under a desk or table. It includes a large hook for headphones below. There is a smaller hook in back for extra loops of headphone cable. I modeled this in Fusion360. Along…
Stand for Pixelsnap Qi2 wireless charger and other 56mm diameter charger. Work well with Google Pixel 10 serie and magnetic wireless charging phones. Printed on front face, no support needed. PLA 100% infill.
This is a edit of Ziller88's design. His file for 1st gen has the incorrect foot-groove size and would not work with 1st gen devices (Serial number's starting with S) If you don't know what generation your device is, see this link:…
Ti22 throwing and survival knife is a really nice and balanced throwing/survival knife (also the 3D printed one is a good practice). I machined my titanium knife, and it turned out really nice and easy to throw. I made a handle cover and…
This is a Focusrite Scarlett 2i2 Mount for the Balolo setup cockpit
Bei dem Modell handelt es sich um ein Fach für die Mittelkonsole bei einem 2021 Hyundai i20n. Es gibt 2 Varianten, eines mit Trennfeldern und eines ohne.
See “Differences” below for more information
Print with tree supports from the build plate. If you want more colors, adjust the print order by objects. No need to glue anything or use screws. PLA, 0,2 layer recommended
This is a really great project that was created by talented people on the Neo - Arcadia forum. Victim of their success, unfortunately we can no longer order "for the moment" the complete frame kits to manufacture the project. In the…
XI25 Pro frame link: https://oddityrc.com/products/ximage-xi25-2-5inch-aerodynamic-cinematic-fpv-frame
spare roof rack cap for Hyundai i20 and others
1.3 Oled mockup model.
This is a camera cage and tripod adapter for the HIKMICRO Mini2Plus V2 thermal imaging camera module. The combination of a thoughtful design and a specific material choice results in a ¼-inch mounting solution that is both easy to print…
BTT Knomi2 mount for Voron 0.2 as a screen
Mount for Focusrite Scarlett 2i2
This is a small case for a wemos d1 mini with a 16x2 I2c lcd. you can use it for displaying weather data from openweather map or for displaying the current time e.tc.
This design uses a 120mm standard pc fan to cool the MI25. Can sustain around 100w of power.
Specifically designed around a Yeti Rambler can koozie and the NIU KQi2 Pro scooter. Replaces one of the reflectors and uses its M4 bolt holes. You need the following hardware: 2x M4x12 bolts 2x M4 Washers Probably best to print it in…
I wrote a guide on how to make it more usable here: https://github.com/Szalacinski/amdv620-to-w6800-flashing-guide If you are in China, you can buy the complete kit from GS Origin here: https://item.taobao.com/item.htm?id=1052125661134…
This is a custom case to hold the Bigtreetech HBB macro button board and the KNOMI V2. You could use the stand to have a better desktop item, or without. There are some other holes to allow for alternative mounting. I used M3x10 screws to…
This is an adapter to mount the Wii2HDMI circuit inside the Xbox Original, It uses the two screws in the AV output to keep it in place. I blended two of the clips with heat to adapt it better to the board. But maybe you dont need to do…
I wanted a stand that could hold my phone by the anker Qi2 charging pad but also I wanted to be able to pick up the phone with the charger still on it. It also works with the thinner anker magsafe charging pad I have so it may work with…
FOR ANDROID PHONES, A MAGSAFE CASE IS REQUIRED. Can fit up to a Samsung Galaxy S24 Ultra. The phone shown in the pictures is a Samsung Galaxy S25. The pictures I took of the stand when printed did not have the rounded corners shown in the…
Printed using the normal Voron settings.
Space organizer in the Qi induction charger dedicated to Hyundai i20 N performance - cutout for iPhone XS and smaller, pen and token for the shopping cart. Tight fit in car. Print with 20% infill.
Ein fischertechnik-Gehäuse für das abgebildete Sensor-Board mit Bosch BME280 Temperatur/Druck/Luftfeuchtigkeitssensor. Montage durch Snap-in-Deckel, der auch die Platine in Position hält. Keine Schrauben. 4-adriges Flachbandkabel, direkt…
Bracket to mount a Supermicro AOC-STGN-i2S PCIe card into most QNAP NAS devices
1U Rack Mount for Topton N5105 i226-V N150 N100 Mini PC
My car's clip broke and the dealership will only replace the whole armrest for a insane amount of money, so I decided to model and print a replacement part. Printing specs Printer: Creality CR10S Pro V2 Orientation: 45deg angle relative…
DISCORD SERVER: https://discord.gg/PmNhTSpWCt MY WEB PAGE: https://la3emedim.fr/ Cooler for my Asi224MC Peltier kit for astronomical camera cooling Support specially designed for Peltier SR-01 5v and ZWO ASI camera cooling kits (224MC in…
Meant as a starting point for custom implementations.
I needed this charger to sit flat so I could fasten it with VHB in my car. The holes on the side probably allow some cooling to happen, they are primarily there to allow you to pop the charger back out of the holder.
Use with an 18mm ZnSe Lens. I've used the MCWlaser 18mm PVD ZnSe CO2 Laser Fokuslinse from Amazon.de, you may find similar lenses somewhere else. 5cm focal length results in an area of around 3*4,5cm which is in focus. Other focal lengths…
This is an enclosure for 3 sensors, a display and a ESP32 to run them all. It has quite some volume and a lot of air vents and it keeps the sensors in pockets that can be sealed with a bit of gum to keep the influence of waste heat within…
These are cases for the I2CDriver ( https://i2cdriver.com/ ) and SPIDriver ( https://spidriver.com/ ). They should fit snuggly into the cases, even with the rubber feet on if they are not too close to the side. Minor retouching might be…
A collection of custom Shimano Di2 satellite shifter button housings
Assembled with four countersunk M2.5 screws. If the buttons get stuck it may need some rough edges filed off the holes.
Ideal case for Raspberry Pi 2/3 along with single MMDVM hotspot. The distance is not mandatory, if you use it, place it on the other side of the MMDVM. Printing without supports, Infill: 15%. Share your printed model.
This spool snaps around the Shimano Di2 SM-BCR2 Charger to make it easy to keep stored when not in use When you install it, make sure all the cables have room because the charger is not symmetrical in any orientation and it only works one…
