135 modeli
A remix that follows the firing order of a 2JZ engine. 0.4mm nozzle, 0.2mm layers (or less) Post-Printing If you can print the 3cyl engine, you should have no trouble printing this one. More cylinders, longer crankshaft, more likelihood…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
This is a gimbal and switch protector the the Flysky FS-I6X Transmitter. It clips on where the lanyard would go. It may work with the Flysky FS-I6 but I don't have a transmitter to test it on. If someone prints it for the I6 and it fits…
Wydruk około 3,62 €–4,43 € nettoWstępna wycena jednego wariantu
A case for your Rii i6 / K06 Mini keyboard with an integrated USB dongle holder and phone stand! This version is reversible so you can put the mini-keyboard in either way!
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Description Digital File to DIY 3D print a Wall or VESA Mount for Technicolor Xi6 (Videotron Helix) TV Terminal. Model match terminal design line. The mount can be screw to wall or at the rear of TV using VESA 50x50 or VESA 75x35 holes.…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena jednego wariantu
Wall mount for Unifi U6 LR WiFi access point.
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Magcubic HY300 WiFi6 Projector
I created this wall mount spacer to accommodate a cabinet or closet where… ethernet comes out of a grommet hole, perhaps with other wires, and you wish not to cover the hole a cut-out exists, but not a gang box/frame and you wish to cover…
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
Stand for Ubiquiti U6-LR-US WiFi6 wireless access point. Use #8 sheet metal screws to mount metal plate to stand. [OPTIONAL] Use #6 sheet metal screws to mount Power Injector to back. Print with extra perimeters (4-5). NOTE (14Dec2022):…
Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.
This is a case and insert for the Flysky FS-i6 or FS-i6x. Sized to print on a MK3 or MK4. I glued some foam to the lid of the case and created an insert for the base of the case. The Case The case is a version of…
3D scanned the Flysky Fs-i6 and created the handles to give it a wider feel. Feels like a Taranasis Qx7 in your hands. No Drilling or Gluing, just snaps in and stays put. https://youtu.be/0_VPp9_kHLE (Originally uploaded to Thingiverse by…
I've always thought that the Bambulab printer is quite impressive. It can print things really fast, and it seems that the key to its speed lies in the hotend. So, can we use it on our printers? Yes, we can. However, there's a downside.…
A case to hold the FLYSKY FS-i6X 10CH 2.4GHz RC Transmitter Controller (https://www.amazon.com/dp/B07Z9YNP7S), 8x AA batteries, and assorted accessories. The battery mounts are remixed from https://www.thingiverse.com/thing:9805 and the…
Waveshare ESP32-P4 WiFi 6 7" Touch Display Case (Wall Mount + Desktop Stand) This is a custom-designed enclosure for the Waveshare ESP32-P4 WiFi 6 7-inch 5-Point Touch Display Development Board (1024 × 600), featuring a clean appearance,…
This is a holder/cover for using a ZnSe lens with the thermal imager UTi690A from UNI-T. It needs to be printed in a hard/stiff material like PLA. This cover protects the ZnSe lens from both the front and back when not in use. The ZnSe…
I fly my drone using the receiver from eachine to receive the 5.8GHz signal video feed. This feed can be directly shown on any smartphone with an OTG USB interface! This design was based on thing: 1415509 and modified to fit a smartphone.…
Design This model is for securing a Focusrite Scarlet 8i6 underneath a desk or to a wall. There are various alternative designs but I wanted one that stopped movement forwards and backwards and both sides connected across the bottom, so I…
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times,…
Transmitter Tray FLYSKY i6 or TURNIGY i6 by GeorgeXib on Thingiverse: https://www.thingiverse.com/thing:2655235
Lens cover for the thermal imager named: UNI-T UTi690A, UTi120S and UTi712S It's a snap on fit to the thermal imager and the lanyard can be attached to it so you dont loose the lens cover when using the thermal imager. Adding the UNI-T…
Based on the original model UniFi6 In-Wall Wall Mount Spacer U6-IW-US
This is a remix from https://www.thingiverse.com/thing:4967196. I have added a hole for mounting a ZnSe Focus lens in to this lens cover. Drop the lens into the hole & lock it with a clip. I printed everything in TPU except the Clip which…
Wall mount for Unifi U6 LR WiFi access point.
I ran into an issue with the original model where the switch covers were attached very thinly due to needing to be bent which made them prone to breaking off. This removes the switch protectors allowing for a stronger part.
Using the Rotor Riot logo to protect your FS-i6 sticks Inspired from http://www.thingiverse.com/thing:2073993 but redrawn from scratch, using logo and joined together with a bridge as I prefer those style designs. It should protect the…
I wrote a guide on how to make it more usable here: https://github.com/Szalacinski/amdv620-to-w6800-flashing-guide If you are in China, you can buy the complete kit from GS Origin here: https://item.taobao.com/item.htm?id=1052125661134…
Start with Fusion and when I try to print.....notice my printer is not big enough for printing this. don't want to separate the file into pieces. if you have a better idea with it wish you have better solution.
FlySky FS-I6X extension dor Micro TX modul (Crossfire, ExpressLRS, etc) and external battery.
Battery Caddy for Fuji NP50/ Pentax D-Li68 single version and four batteries version printed with Prusa Mini+ with PETG
Allows mounting of the TPLink AX3000 wifi antenna to a wall. Use #4 wood screws.
You will need these components: M3x30 Screw *2 M3 Nut *2 M6x12 Bolt *1 M6 Nut *1 Setup: Insert the M6 nut to the slot and tighten the M6 bolt. Then insert the joint to the rod of the frame. then insert the joint part 2 and insert M3…
This is just a model I made for my own purposes, maybe you find a use for it. The mount I used previously was quite flexible, not secure, and everytime I plugged something in, it moved. So I drew up another one with focus on sturdiness…
Nice project, but little tricki to print at once. Look at screenshot, how to set on bed and set supports. Locking pin - when you put it inside and turn 90deg - its locked and dont fall of. Printed from PLA, on bambu X1, 0.2mm layer, with…
A slightly modified version of NathanMichaelMoore's gimbal protector to strengthen the part
A remix of a perfect model makes it an even better fit, making sure that it can fit. All credit for the sleek aesthetic and 99% of the design goes to benbojangles: https://www.thingiverse.com/benbojangles/designs There are two versions.…
Zyxel Cloud WiFi6 AX1800 halter für Tisch
This is the mount I was using in my drone videos: You need to use threaded inserts to make this design work. You also need to print this project to attach it to your radio: https://www.thingiverse.com/thing:1874118 And to attach the main…
I modified a single gang box originally but it was a little small for the weight of the in-wall unit and potential pull of cables. The passthrough lets me route cables out the back. It's big but I've been using it for awhile and I think…
for intra oral scanner medit i600
Hi Internet Sim Rig Enthusiasts, If you've seen any of my YouTube game play streams, you'll know by now to skip the first 6 mins because I never have sh!t setup first go lol. But! You'll also know the struggle with the keyboard and mouse…
Friction fit Onshape document https://cad.onshape.com/documents/564cafc40f26e2e23155f577/w/1b99f61fca698a9f6b175dce/e/cadc660cc3400bd68c0760fc?renderMode=0&uiState=61ba358b1c6ff91db3a7c10a Category: Tool Holders & Boxes
Video https://www.youtube.com/shorts/X6UwkqAMoZo ________________________________________________________________________________________________________ ENGLISH -------------- I wanted to create a simple system to be able to switch…
No supports needed for V1. V2 needs supports. Print face down for a smooth front side. The display fits in the case by friction when printed on my Prusa Mini+. 02/03/2026: V3 - Added a small inward chamfer sloping towards the screen.
V5 of the Gimbal Guard is the one you should be printing, I've uploaded the other versions to show the iterative process I went through. V1 worked, but was terrible to remove, and was mainly to confirm my measurements. V2 was nice to…
Friction fit 10 inch rack mount for Focusrite Scarlett 8i6
Stick propector for your FlySkyi6 or FlySkyi6X
This is an antenna modification for the Fsi6x that is suitable for the Fsi6 as well. With this design you will replace the stock antenna and you will not have to drill any holes in the radio. I printed as it is with supports and infill of…
Print in PETG using any QUALITY or STRUCTURAL profile.
Stand for Polaroid i600 photos. Can be printed without supports.
Here is my take on a lens cover / 20 mm ZnSe macro lens combination to be used with Uni-t UTi690A (tested) / UTi120s - UTi712s (it should work as they seem to pretty much be the same camera) thermal cameras that does not require glue or…
This is a remix form another model. Here I only uploaded the moditications done. You should go to the original part and take the misssing files. Based on this design ( https://www.thingiverse.com/thing:1607446 ) I made a new top part to…
guiding Blade for Flysky FS-i6 if you convert to drive RC Cars with
Description I just picked up a TOADS DB6 Digital Interface from Temporarily Offline (KM9G). I am in no way associated with KM9G, just needed a protective box for my TOADS. Now I wanted to add a Raspberry Pi Zero 2W and not have an extra…
Wall mount for a Ubiquity UniFi6 Mesh that attaches to a network wall jack. https://www.tinkercad.com/things/iRDIbuNBCls
A simple case with buttons for the Waveshare ESP32-P4-WIFI6 4.3inch Development Board
Because I didn't find a gimbal protection for the FS-i6S i designed one by myself. Therefore I used the screw of the mobile/tablet mount that came with the radio but a normal M6 screw is also possible. Works pretty well. It holds the…
FlySky i6 gimbal protector There are several i6 gimbal protectors on thingiverse, but none of them protect the switches too. Prints best with supports and 30% infill for strength Print Settings Printer Brand: Prusa Printer: Prusa Mk2…
The power switch on the Flysky fs-i6x transmitter is a terrible design. It sits flush with the control face and is a smooth, chromed plastic finish. This means that if your thumbs are ever damp (or very dry) it is almost impossible to…
Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-4C based on my other design for the 3.4" version
I re-designed RepRaptor's industrial steam valve to replace the knobs "VRA"and "VRB" on a FlySky FSi6 RC transmitter. This provides a nice nostalgic reference to the transmitter when controlling live steam locomotives. Print Settings…
This is, as far as possible, a faithful re-creation of the battery cover for a FlySky FS-i6 / FS-i6X transmitter. Print settings used: - Filament - Creality Hyper PLA - Printed with the text facing upwards - 0.1mm layer height - 3 walls -…
I designed simple shelf mount for my TX and connect cable for a simulator. The diameter of the holes is 5 mm. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0,2 Infill: 80% How I Designed This…
Designed this Mount to be used with most common beam clamps. I needed a way to mount several of these in our Warehouse on the steel beams. This mount will adapt to most beam clamps. For reference I used these as my clamps -…
Today I am posting my Nissin Di622 flash mount to attach a cheap, Chinese, 4 stick softbox. It has also a slot to slide a color gel filter to change flash color. From the hardware part you will need: 2x M6 screw 2x M6 nut If someone needs…
Longer version of the neck balancer for FS-i6 transmitter with larger hole.
printed without supports Petg 0.2 layers
This stick increases grip and precision in movements To install the stick insert an m3 insert into the hole, unscrew the original stick and screw this one
self‑centering add‑on for RC transmitter sticks. Just place it over the throttle stick and secure it with elastic band.
Protective cover for the screen and the keyboard of the thermal imager UNI-Trend UTi290B, UTi690B. You will need 8 magnets 5x1.7mm, double sided tape for the base, paper glue for the text Do not take into account the apparent play on the…
Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Build your own, or buy a kit from Evil Genius…
Our Fisher and Paykel BI602X Wall Oven started to have an issue with the Soft Touch Buttons. The button edges started to crumble. It was only a matter of time before the buttons would stop being functional and they were starting to be…
Threaded insert frame for FlySky FS-I6X handles.
Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Build your own, or buy a kit from Evil Genius…
Mit diesem Einbaugehäuse können die Rauchwarnmelder der Firma Ei Electronics in eine geschlossene Gipskartondecke eingelassen werden, um eine gefälligere, flache Optik zu erzielen. Alle für die Funktion erforderlichen Öffnungen, sowie die…
Covers for FlySky Fs-6x and FlySky FS-i6x style transmitters to protect the gimbals and switches in transport. I've broken enough switches that it was time to get something more suitable for the abuse my gear goes through, getting chucked…
Fibonacci64 is a beautiful 86mm circular disc with 64 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy fully assembled or as a kit from Evil…
This started out as a project to attach a Kyber button board (and more to the point, the buttons) to my FlySky R/C radio transmitter. It has since evolved into a modular accessory mount; the button mounting parts are still included and…
I did nothing to modify this design, except to separate the two parts into two different STL files so they could be printed (or reprinted) individually. All credit to JCG_RC for the effort to scan and design the grips. Category: R/C…
A keyboard based off the Sick68 in case anyone is interested in a more minimalist aesthetic. Using an arduino pro micro “upgraded” to get 2 extra pins, here is a guide. Key layout is the same as the sick68 (As it uses the same plate) I…
Feb 2026: Decided to move a few of my models to public domain. Simple case for FlySky's new radio receiver! (I printed in clear PLA) It prints in two parts, and screws together using 2mm tapping screws. I used 11mm length screws.
You can get the controller at https://a.co/d/cC7XSKp
Upgrade your budget FlySky FS-i6X into a fully capable ELRS radio! I designed this custom back cover to fit a Radiomaster ELRS Nano module and a 2S 18650 Li-ion battery pack . Combined with the OpenTX/EdgeTX mod for the FS-i6X, this turns…
Replacement power switch for flysky i6 and other similar R/C controllers. I don't like the original switch because its hard to switch because its so small and slick. This is loosely based off of GenesisR's version. I took the switch…
A board to contain the Waveshare ESP32-P4-Wifi6-POE-Eth board with HDMI adapter for use as a KVM. Use software such as https://espkvm.io (or http://github.com/espkvm/espkvm ). Also posted at…
V2 - Added space for the onboard speaker's sound to escape from the bottom when in ports facing up orientation. Made for my NINA display project https://github.com/chvvkumar/ESP32-P4-NINA-Display
English: I created one here, quickly, for my Ikki68 Keyboard: Width: 343mm Height between 17 and 20mm Depth: 100mm Printparameter: 2 perimeters 13% infill PLA There are 2 parts, which are held together by magnets. Suitable are magnets…
Printed with PETG. Code for controlling the stepper with either a Pi5 or ESP32: https://github.com/chvvkumar/allsky-asi676-focuser
Battery Cover for a Turnigy -i6 Transmitter
this is a extremely fine ipad case. stick this panel on your ipad mini6's back so yu can gain a smooth naked ipad.(Sand it to get a better feel, use cloth-based double-sided tape to stick it better)
Note: While this printable was designed for the FlySky i6x, there's no particular reason you can't use the parts with any similar R/C radio, as long as you can find a place to attach the screws that doesn't short out the radio. Background…
A case for Banana Pi BPI-R3-Mini and BPI-WiFi6 Mini (they are compatible), with space for internal antennas and a 37x37x24mm heatsink. Needs 4 M3 insets and screws.
This remix is the combination of two designs. The UniFi6 In-Wall Wall Mount Spacer U6-IW-US by Shane (printables.com/model/269375-unifi6-in-wall-wall-mount-spacer-u6-iw-us/remixes) and the OnQ Bracket by Nick Berardi…
Flysky FS-i6X (FS-i6) 3rd Gimbal Hi, I have designed a fully functional 3rd gimbal that can be run off 2 of the Aux’s (VRA & VRB) with minimal modification to the original components and no extra programming needed while still maintaining…
It's a replacement part for Ignition Coil seal on GM 4.2L I6 Atlas engine. Supposed to fit 02-09 Chevy Trailblazer and GMC Envoy. Mine is 03 GMC Envoy with 170k miles and all genuine rubber seals were cracked. Replacement rubber seal is…
03/01/2019 I had to reprint my transmitter protector so while I was at it I decided it is right time to modify two of parts to make it easier to attach it on transmitter. (wider fillet holes at the bottom) I uploaded three NEW objects…
ASI676MC AllSky Mount for MAKERELE Waterproof Junction Box Outdoor Junction Box ABS Plastic Waterproof Universal Electrical Project Box (Grey Cover, 11.8 7.8 6.3 Plastic latches) https://www.amazon.com/dp/B08PPF9RVF
Related to: https://www.printables.com/model/116330-uni-t-uti690b-znse-focus-lens-holder
