2028 modeli
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have The Minions for you for an exhibition or diorama. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If by chance the…
Wydruk około 16,44 €–20,10 € nettoWstępna wycena jednego wariantu
Baltimore Ravens 1st Layer Black 2nd Gold 3rd White 4th Black 5th Gold 6th Purple
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm releasing the second subset of my future RC car (a 1/10 UNIMOG chassis as accurate as possible - that's the goal !). The first subset was a limited slip differential you can find at…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
In the files you'll find a 16-thread and a 8-thread version of it. 80 mm in diameter 2,5 mm thick With haptic directional arrows, letters and braille. You can print it directly without supports. In the files you'll find also find the…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
This is my third attempt at a 2 speed automatic gearbox and it's been delaying my Unimog RC project for quite some time… You won't see attempt #2 because it didn't work… The clutch would break (too) soon, so I gave up and tried something…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Hello, I'm industriel designer, I usually draw on Rhino3. I made an extruder motor cooler which has the particularity of being positioned in the axis of the extruder. This is for new MK3s+ but also corresponds to the Mk3s model. The…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🥋 Keychain Kimono 🥋 Minimalist keychain inspired by the traditional martial art kimono / judogi This small decorative keyring is easy and fast to print, making it a perfect accessory for your keys, backpack, or as a small gift. The model…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Kumihimo is a Japanese form of braid-making. Ribbons are made by interlacing strands. Kumi himo is Japanese for "gathered threads". This one was designed for thin yarn. If you want to use thicker wool -> adapt the OpenSCAD File
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Cerimonial Alien Temple. Major mesh fixes with added uv displacement. ' Resculpting to head and temple base.
Wydruk około 10,01 €–12,23 € nettoWstępna wycena jednego wariantu
vycentrované použité závitové vložky do plastu M4 , šrouby původní ( v originálním balení jako náhradní s bříty 9 + 9 ks ) použil jsem ASA , určitě by vydržel i z PETG bílá barva na unašeči není vada tisku ani materiálu :-)
Wydruk około 7,91 €–9,67 € nettoWstępna wycena jednego wariantu
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to print a Case for my Pimoroni Pico Display pack 2.0. and couldn't find one that suited so I created my own. The case has a snapfit shell, buttons, led hole, and usb cable cutout. 14/06 I've added 2 additional experimental…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
Stackable Insertbox 1x2 units in footprint, full height compatible with Sortimo/Bosch/Auer/Allit EuroPlus Insert 63/others in size many variants available, see the link below this variant is available commercially as injection molded…
Wydruk około 3,31 €–4,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simon's Cat is a British animated web series released in 2008 by writer and creator Simon Tofield, who then expanded Simon's Cat into a book series. The films and books feature a hungry, white cat who uses creative schemes and tactics on…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
Utensile per rimuovere il filtro dell'olio stampato con ugello da 0,8 . Stampa molto rapida di 2 ore, 0,3mm in PETG, molto resistente. Le misure del filtro le trovate nelle foto, l'importante è che il vostro filtro da lato a lato sia…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a place to store my caffeine addiction fuel so I made this and thought to share it :3 Highly suggested to use supports, tested with 0.2mm layer height, because I wanted to make it asap, should work fine with finer layers.
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
school project
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
As a vehicle wrapper, I need my wrapping lettering tools every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. In my work I need different vinyl…
Wydruk około 22,04 €–26,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was desperatly searching for a mobile mount for my speederpad but didn't find any so i decided to build one. The very nice and solid Tower mount clip credited to @YosiYaffe https://www.printables.com/@YosiYaffe was a huge time saver.…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena jednego wariantu
Ich habe für meinen Paulimot Messchieber 300 mm ein paar Erweiterungen gebraucht, um tiefer in einer Box messen zu können. Also habe ich mir diese Erweiterungen konstruiert. Sicher sind diese nicht so genau und da es Kunststoff ist,…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
The main part is the dividing plate fitting to the main spindle nut with: 0°, 90°, 180°, 270° indexes 1°, 5°, 15° marks and holes for fixing in 7,5° intervals Best it is printed with a color change after the first 0.5mm for good contrast…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Mimon
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Update 26.12.2025: Messgeräteeinlage und Vorlage zum selbst erstellen einer Werkzeugeinlage in STL und STP Format hinzugefügt / Add insert measuring tools and template to create your own tool insert in STP and STL format.…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
zakladna 100x100x107 tisk je z ASA vrstva 0.20 Vytvořen gcode pro MK4 stl soubor vsechny tiskarny
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
Přívěšek na klíče “mimozemšťan”. Doporučujeme dvoubarevný tisk svítící filament + barevný obličej. Rozměry 34,33 x 41,75 x 2,5 mm (bez očka). Model obsahuje soubory bez očka ("alien") a s očkem na klíče ("alien_keychain"). Gcody se 100%…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Two stackable storage boxes for my tools. These boxes fit perfectly in the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. There is an upper part and a lower part. The upper box has an additional recess underneath to prevent…
Wydruk około 7,68 €–9,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought one of these 2.8inch LCD displays ( https://shop.pimoroni.com/products/pico-display-pack-2-8?variant=42047194005587 ) to use with a Pico W as I wanted a small, but capable bit of screen space to show some stats etc. It just plugs…
Wydruk około 2,19 €–2,67 € nettoWstępna wycena jednego wariantu
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Embedded/ Integrated Housing for IMOU IP Camera into ceiling. COQUE encastrée pour camera IP, marque IMOU (AMAZON)
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The existing models to attach a MLX90640 to a Raspberry Pi transform the whole setup into a thermal camera. I wanted to use the camera while allowing the Raspberry Pi to have other uses as well, therefore created this detachable cam…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
UniMount Version Base/Receiver Found Here: UniMount Printables Page Idea: A simple dog poop bag holder, to have a roll of poop bags (like these: Amazon Affiliate Link ) available in a convenient spot around your house! Ours is on the back…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
As an extension, I created another storage box for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. This fits perfectly under the holder of my mounting magnets. Ideal for storing small parts. Print Settings Printer: Prusa I3…
Wydruk około 4,51 €–5,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tiny case for tiny board - https://shop.pimoroni.com/products/tiny-2350?variant=4209263 Originally printed with the following settings: 0.4mm nozzle (high flow) 0.10mm STRUCTURAL supports on build plate only Filament used: original Prusa…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
The FlexiMount Cable Holder is a versatile and easy-to-use solution for managing your cables. It can securely hold up to two cables, each up to 8mm in diameter, and can be mounted on a wall or desk with a single screw. Inserting or…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
As a vehicle wrapper, I need my lettering tools for car wrapping every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. Wooden squeegees with felt…
Wydruk około 8,87 €–10,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As a car wrapper, I need my wrap lettering tools on a daily basis. I created the holder for mounting magnets for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. With the magnets, large car films or posters can be aligned, fixed…
Wydruk około 5,86 €–7,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nemusí pasovat pro všechny modely, vyráběno původně pro Sennheiser PC 310. Tiskni na bok, model s držákem kabelu s podporou.
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sortimo T-BOXX Compatible Drawer Organizer Grid (9x10) Tired of loose bins sliding around in your workshop or garage drawers? This modular grid system is designed to create a rock-solid 9x10 layout (fitting up to 90 bins) based on the…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Halterung für 2 Paulimot Schnellwechsel-Stahlhalter System Multifix Größe A mit einem Grundhalter für 3 Halter montierbar an einem Regalbrett. Gedruckt mit ELEGOO PLA PRO auf Prusa XL Drucker 3 Wandstärken, Außenwände zu erst,Infill 20%…
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
Hello! Wanted some light in my Ikea Platsa furniture and the ikea solution was to expensive for me. I bought to Action a Baltimore LED Tube set for less than 5€ and wanted a solution without screw in case of LED tube failure.
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Check my other Simon's Cat designs https://www.printables.com/model/1239416-simons-cat-you-are-purrfect-keychain…
Wall Hanging Cat Decoration
Mostly Printed CNC Primo Version MPCNC "F" 25mm Version Released on 7/23/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
Simon's Cat Bookmark! 😻 A simple Hanging Cat BookMark for your books! 😻
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Mostly Printed CNC Primo Version MPCNC "J" 25.4mm Version Released on 6/22/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
About The Ultimount is a low profile, invisible and easy to print (zero supports needed) mounting hook solution for the Ikea Skadis. The hooks and mounts have been designed to ensure no supports are needed to print either the hook, or the…
*FIXED FEET ISSUE* El Primo is always in the spotlight and that's right where he wants to be! There's no audience he can't win over, except maybe his fellow performers...
" Jimothy (born c. 2025 is a wild raccoon living in Seattle, Washington, United States. His unusual short, rounded shape, likely the result of a spinal deformity, led to him becoming a viral internet sensation in July 2026." - WikiPedia…
Simon's cat figure, scratch version and stretch version. Can be use as fridge magnet by glueing a magnet to the back. I'm a big fan of the Simon's Cat Cartoon. If you don't know what it is, check it out: https://simonscat.com/ Thank you…
This is a CAD drawing for Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374.
Źródło oznaczyło ten model jako treść 18+.
MEOW! with a good profile you can print it without support or infill. Have fun with this cute cat :) Category: Models
Improved version of my original magnets with 5 new cats, slightly thicker (5.5mm) and embedded magnets. I provided an Orca 2.1.1 profile for the MK4 where magnets are already placed and pause & color change are setup too. All you got to…
Mostly Printed CNC Primo Version MPCNC "C" 23.5mm Version Released on 8/29/20 Questions are best asked here, https://forum.v1e.com/ Print instructions https://docs.v1e.com/mpcnc/PParts/
I recently received the NVME Base by Pimoroni for my Raspberry Pi 5. I noticed that there are only a few cases which accommodate it. I was sure that I could remix a nice case to change that. Here it is… Update: Added different bottom…
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
This is a mounting bracket for the L-Boxx storage boxes by Bosch & Sortimo / BS Systems that works with the L-Boxx G4 and previous gen. L-Boxx. For drawers, shelves, wall-mounting, etc. Features Allows one-handed clipping in and clipping…
Fun little Simon's cat fridge magnets. Default size vary from 80 to 100mm in heigh and 5mm in thickness. You may want to change color after the 3mm layer. Glue a magnet on the back (CA or neoprene glue). I used a single 10x2mm per item, I…
Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…
Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374 in STEP format for those who don't have Fusion 360
I like this robot competition, I created another model, I really like the shapes and lines of the Honda Asimo robot , so I tried to model one as best I could. I used 4 different types of movable joints in the model - vertical, horizontal,…
A great Wall Art of Simon's Cat. Do not forget to upload your makes, thanks ! Inspired by a sticker
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
Hello Show me your your hungry Simon´s cat :D I added a version with less polygones Who prints a life size cat? Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0,1 Infill: yes for the mouth…
As part of a quarantine project, I decided to pick up a used Nintendo Wii online to mod, and thought it would be fun to try 3D printing the accessories for it. Unfortunately, there aren't a ton of aesthetic options for most of the…
I used no supports. I split the model into two parts and then glued them together.
Kumihimo, anyone? Kumihimo is a Japanese braiding technique, which can be made with a Marudai or a Kumihimo Disk, like this one. I'm making Kumihimo braids for several years now and I tried lots of different disks - but alsways the same…
06/01/24: I have released my UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale . Remixed for my Unimog RC design (in progress). See my Diff #4 for mounting instructions. You need 8 MR63ZZ ball bearings per differential (for Unimog 16…
It is better to print it with structure, and besides the neck is very small so when you print it give it a layer of glue
Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema…
Made my own take on a mount for the L-BOXX by Sortimo. These toolboxes are used by Bosch Professional for there power tools and this mount makes it possible to secure your toolbox in the car or on a storage rack in the garage. I used this…
This is a baseplate for the Gridfinity modular storage system by Zack Freedman that fits in a L-Boxx Mini organizer box. It's based on the L-Boxx Mini inner volume model that can be used to make custom L-Boxx Mini inlays that fit…
A deck box for the digimon card game, designed to look like a v-pet. Three versions are available, one for single sleeved and two for double sleeved decks (one for decks using inner sleeves and one for outer sleeves). All fit 50 card main…
Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…
Compliant mount for 11-12mm Drag Knives, and/or 11mm-50mm Pens and markers.
Emplacement on the back to place the magnet. If you like it please hit the LIKE button, it helps me with some Prusameters :D thank you.
My version of a Junimo from Stardew Valley. Should be easier to print since I flattened the bottom of the legs and put the arms on the ground. Slow down at the antenna, at a small scale it will wiggle around the nozzle. Update: Uploaded a…
This is slide for L-Boxx (tested with models 102 and 136 G4) video https://youtu.be/P9l1zlHIJnc printed in ABS added .f3d files.
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
It's that little shortened spine fella what scampers around Seattle! Now in miniature form! He's scaled to fit on a 1 inch round based (25.4mm) or you can scale him up or down as you wish! Print him huge! If you liked this model and want…
Víčko plechovky piva Pilsner a Kozel , Radegast, limonáda , Pilsner and Kozel ,Radegast , limonade beer can lid
This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.
Here in France, a refill cartridge contains 8 capsules. The new design is now provided in 3 variants and sizes. Sizes / Capacity : • M : 9 capsules • L : 13 capsules • XL : 17 capsules Objects are optimized for a line width of 0.5 mm.…
My idea for easy cleaning aquarium with shrimps. Keep a large number of moss balls clean - MARIMO. Instead of glue I use burning filament - dripping onto the glued part. (glue is toxic) Instructions to bend branches are in the video and…
Basic mount. On the top mount the word "UP" should be mounted so it can be read properly. The clamps have a rounded corner side and a chamfered side, they match the mount part. You will need to rotate the spindle lock to make the mount…
This drag chain support for the MPCNC Primo replaces the regular Truck Clamp. It is for the 25mm version (F) and is suitable for a 30 x 15 mm aluminium strip which can be found at your local hardware store in 1m lengths. (at least here in…
Kimono Cat. Update: added kimonocat3 → bowtie fixed. old version removed. Very nice model designed by: "Lowpoly Kimono cat" (https://skfb.ly/oKxVC) by Khyoocumber is licensed under Creative Commons Attribution…
Disque pour tressage kumihimo avec chiffre en relief remix du disque kumihimo 1832378 Un tutorial pour la réalisation de tressages est disponible sur kumihimo.fr --- Si vous voulez me soutenir pour mon travail ou juste si vous êtes sympa,…
(Update 1/26/2020) Added Amp and Speaker cases. Added a cover for LCD panel's bottom part. (Update 1/11/2020) Thickened walls slightly. This improves rigidness and also the modified back wall makes assembly easier. Summary This is a case…
This is a wall mount for the Fujitsu Esprimo Q920 mini PC (USFF). It consists of a base and an optional mirrored top part; the base is working fine without it, but I felt more comfortable also adding the top. Make sure that the vent holes…
I couldn’t believe this wasn’t already an available model! Here’s my version of the Tags and Crests found in Digimon Adventure, so you too can relive your dreams of being a Digidestined. The tag is approximately 53mm tall, perfect for a…
A tool-less case for a Raspberry Pi 5 with the Pimoroni NVMe SSD adaptor base. It's also designed for the OEM Pi active cooler. Assemble the Pi / Adaptor / SSD as per the Pimoroni instructions with the stand offs and 8 screws that came…
