711 modeli
The container lid closes very tightly and locks well in place, due to a tiny thread-like design at the end of the bayonet mechanism. This gives the outside of the container a very smooth appearance without any visible gap, while at the…
Wydruk około 0,99 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support me :: Please consider donating any amount as you see suitable to help me create more content and keep sharing it for free. Info :: This was a request from Koppa to (re-)create a model of the Mosby stasjon in Norway. We give this…
Wydruk około 9,59 €–11,72 € nettoWstępna wycena jednego wariantu
Este barril es un excelente adorno para tu escritorio, es el logo de la empresa John Deere. Se imprime sin soportes.
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Spare part/replacement for water drain plug: Kayak: Prijon T-Canyon (ca. 1995) Possibly also fitting for other Prijon Kayaks. Main Slicing parameters: - Slicing parameters used for Prusamet PETG - 0.2mm layer height - perimeters: 4 -…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compass for riichi mahjong. Slot is for standard scoring sticks (65 x 7 x 4 mm). Tiles on the picture are AMOS 28 mm (28 x 21 x 16.5 mm). You can make compass bigger or smaller depending on tiles you are using. Compass size is 130 x 130 x…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
Las cajas organizadoras están basadas en una estructura de 55mm, las cuales conforman una cuadrícula 2x2 (110mm) o 3x3 (165mm). Por lo cual los cajones ideales para este tipo de sistemas son los que de interior tengan múltiplos y…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Indiana Jones-ish Artifact
Wydruk około 4,56 €–5,57 € nettoWstępna wycena jednego wariantu
Lichtgevend jongens naam Isaac, Luminous boys name Isaac
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
Use ABS or ASA. Try it without support.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Lichtgevende jongens naam Linus, Luminous boys name Linus
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Neues Griffstück und kleiner Griffschutz für das Bajonett 57 der Schweizer Armee. Ist der Griff Ihres Bajonett 57 defekt? Laden sie das neue einfache und passgenaue Griffstück herunter um dieses auszutauschen. Wenn sie das…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Made possible by my amazing Patreon supporters! If you like my work and want more models, including pre-supported resin files you can support me in Patreon Only one support structure needed for a small spot on his face. Rest of the model…
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
Casey Jones mask in two parts. As seen here: https://www.instagram.com/p/BMO0HKegia2/ Optimized for 3d printing from the original file found here: http://www.wamungo.com/PrintModel/Detail/TMNT-Casey-Jones-Mask-547e373b89702b160cbc8d6c…
Introduction/Support Me: If this 3D design helps you optimize your PC's cooling, please consider hitting "Like" on this model file! Your support encourages future designs. You can also support my work by purchasing items for this setup…
Since the Jonsbo N2 originally only comes with a quite loud “slim” (15mm deep) 120mm fan in the back I wanted to swap it out for a quiet fullsize (25mm deep) fan. Unfortunately due to the very limited space in the back of the case this…
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
I was told I had uploaded this on other sites, but not here on Printables. This is now corrected. Enjoy! :) Jon Snow. It is difficult to write much about this character without spoiling things for those who haven't yet seen the entire arc…
This is my addition to the Jonsbo N4 case to keep disks at safe temperatures. The magnets used are 2 mm thick and 8mm in diameter (4mm radius). The fans used are: ARCTIC P12 Slim PWM PST 120x15 Printed on Bambu Lab P1S with a black matte…
In early spring of 2023, I built a small Indy / Jock Lindsey's Hangar Bar themed bar in our basement storage area /unfinished game room. As of mid-April 2023 I started to ask around on the internet looking for a Dial of Destiny /…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Indiana Jones Model, sculpted in zbrush. May need to be scaled. Hat is a separate piece. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: Sculptures
Cajonera Bajo la pantalla de Ender 3 Cajón alto para guardar boquillas y piezas pequeñas. Cajón medio para guardar las llaves Allen, destornillador, llaves fijas y dos espacios para las tarjetas microSD y el pendrive. Cajón bajo para…
Diese eindrucksvolle Büstenskulptur ist inspiriert vom ikonischen Erscheinungsbild eines verfluchten Piratenkapitäns mit Tentakelgesicht – bekannt aus einer beliebten Abenteuersaga. Die Figur kombiniert nautische Eleganz mit dunkler…
This year's christmas present for my mom. Thought I'd share it with you. A standard set of 144 Mahjong tiles. The case measures roughly 180x155mm (without the hinges and therefore should hopefully also be printable on the Prusa MINI). The…
if you wanna make it cooler, download this diorama :) https://www.prusaprinters.org/prints/107523-the-temple-mini-indy-mindy-and-micro-joel-not-incl
🔵 Pirates of the Caribbean (Davy Jones key) 🔵 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/channel/UCn-fQH2--PRf4VltMLOjYcw ■ Video ➔ ■ Material - PLA ■…
A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.
V1.2 Noses should fit into original slots. Better clearance Add slim Version (i.e. Arctic P12/P14 Slim)
Huge thank you to Printables user soozafone for creating my new obsession, Lucky 13 . Supports will be needed for the Hat and Head You will need the Lucky 13 armature and skin found here…
I recommend printing them with the icons towards the plate of the printer, to save color and make them look a little more nice. Scale by 50% for the travel version.
"It belongs in a museum!" - Indy I'm happy to share the Cross of Coronado from Indiana Jones and the Last Crusade . This package comes with everything but the Crucifix Jesus Figure; I got mine from 123D, just search for Crucifix christ .…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Hi Geoff, This was all I had! Please check the sizing suits your needs and upload some picks if and when you make it, Cheers Jace
This is a set of blocks that can be used to recreate the Indiana Jones figure at 500% scale. This figure was included in 15 different sets from 2008 to 2009 such as Indiana Jones and the Lost Tomb , Indiana Jones Motorcycle Chase , and…
Here is an Indiana Jones Keyring i made. No supports needed. Enjoy !
As I recently got into playing Mahjong and did not have tile holders yet for my set I decided to design my own tile holders that fit my needs. It has a width of 510 mm when assembled . The individual pieces have a width of 170mm . The…
Remix of the “ Jonsbo N4 - 2x SLIM Fans Front Adapter ” This version uses 10x2mm magnets. STL available as one piece or two pieces. Used the same fans as the original ARCTIC P12 Slim PWM PST 120x15 (affiliate link) Printed on Bambu Lab…
The Holy Grail from The Last Crusade, based on photos of the props from auctions and still frames. Should be sized and profiled pretty similarly to the “real” thing. There were multiple Holy Grail props used in the movie, so there will…
This is a taller version of the foot from the Jonsbo D31/D41 series of ATX computer cases. The purpose is to increase the gap under the case and improve airflow into the lower intake fans. The gap with the tall feet is now approximately…
About The included 3MF/STL files are based on a 5mm diameter x 3mm height neodymium magnet. The Fusion file is included if you have different sized magnets, changing the parameters will adjust the model. No modifications are necessary to…
Mahjong tile rack with rows for hidden and revealed tiles. Fits 20x14x10mm tiles Use the dovetail feature in prusaslicer (cut tool)
Indiana Jones. ah… I will leave it up. But after stepping back and looking at it… Not digging it. meh.. garbage.
PEACEMAKER - JONH CENA OBSIDIAN STUDIOS está absolutamente emocionado de presentar una excelente adición a la serie PATREON EDITION a escala 1: 6: THE PEACEMAKER VERSION de HBO SERIES! Disfruta de la gloria de esta estatua del Pacificador…
Complete your Thor cosplay with this mighty hammer! This is a 3d model of Mjonir from the marvel movies. I have tried to make this as accurate as possible with different screen captures and behind-the-scenes pictures of the prop. I have…
Large bed only. (6/2/2025): added 25mm height fan model Print with support.
Criei este modelo para específico para o concept da prusa. Um Busto do Dave Jones.
UPDATE: I slightly tweaked the HDD baseplane, now the hdd slides perfectly. Every tenth of a millimeter counts. UPDATE 2: I modified the HDD part and removed the extrusion. I uploaded the full fusion 360 file under the name v2.1, and the…
Adapter to mount a 2.5" SSD or HDD into the 3.5" bays of the Jonsbo N3 and N2 . Designed for a snug fit with the stock drive trays, no tools or mods needed. Print Info : PLA, 15% infill 0.16mm layer height No supports ~4.5 hour print…
Small, easy-to-open pill box with bayonet catch and various lids. Dimensions: Lid Diameter 44.00 mm Height 11.00 mm Box Diameter 40.00 mm (inner diameter 34.00 mm) Height 30.00 mm (height inside 28.00 mm) Total height 32.00 mm Print:…
🔵 Indiana Jones - svatý grál 🔵 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ I created Holy Grail from the movie "Indiana Jones and the Last Crusade". The other models from this movie are on its way. Stay tuned! Follow me on YouTube for more info about what you can…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Kenner Indiana Jones toys were one of my favorites as a kid. I always loved the Well of Souls map room play set as the miniature map was so cool. Here is a recreation so you can print your own for setting up your own scenes. I modeled…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Una de las piedras de Sankara de la pelicula Indiana Jones y el templo de la perdicion. El modelo no esta escalado, pero es super sencillo. se escala a 135 mm de altura y luego, deseleccionando la casilla "escala uniforme" se escala el X…
Travel Cajon with a really rich voice. Print so that the sound board (drumming surface) is solid, with as much infill as you dare (My print took nearly a full fresh spool at 60% Adaptive Cubic with 4 perimeters and 4.2mm top surfaces) .…
🇪🇸 ¡Bienvenidos a Asturias, España! Welcome to Asturias, Spain! These model was created by Dany Sánchez. St. Peter's Church ( Iglesia de San Pedro Apóstol ) is a Catholic temple in the northern Spanish city of Gijón, in Asturias. It is…
Quick remix I made of this model, just to add a base, from thingiverse.
The Jonsbo N2 only has an option to mount one 2.5'' SSD to the case. With this holder you can mount a dual stack of SSDs to the same spot. 4x M3 heat set inserts required
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
In space no one can hear you meow. At 100% the zenomorph is 5 inches tall and the optional display deck is 8 X 5. OK, this alien is cute but it's Ugggggggggggly to slice. It's possible as you can see it printed in the picts. Your support…
Ever want to have the rule card for Mahjong out on your table, but not have enough space on the table for everything? This handy card holder folds flat for easy storage but holds a rule card off the table. Sized for both the small and…
A model of Davy Jones' key from Pirates of the Caribbean: Dead Man's Chest. If you want it to look more like the movie version with water damage you could try a darker filament with the "Fuzzy Texture" in Ultimaker Cura.…
You may be thinking - another front fan mount?… Yes, though this one is different from all the others I have seen. I personally didn't like the fact other designs added an additional section in-between the front plate and case.…
The Jonsbo C6 ITX Tower has notoriously bad air flow. These panels let enough air through. No supports, no additional parts required, just print an install. I included: Meshed versions which I created inside orcaslicer with a modifier…
When I saw the Jonsbo N1 I wanted to create a (mostly) 3D Printed version. I've already made some modifications from the last time I took photos. But since this ITX board I have doesn't work, I didn't see the need to waste more filament.…
The Jonsbo N2 is a very pretty case for a relatively compact home NAS. Unfortunately it doesn't come with a way to add a case/CPU fan. With this holder you can easily add any 120mm fan for better CPU cooling. M3 heat set inserts required…
This is a simple drive bay adapter designed to fit into NAS cases, specifically the Jonsbo N2 using the included mounting hardware. It accepts a 7mm 2.5" laptop-style drive and allows it to be inserted into a hot-swap bay. As the drive…
Designed this bracket to use in my Jonsbo D32 mATX PC case, but works with other cases as (see list below). The CPU cables provided with my Corsair SF850 power supply were relatively short and struggled to reach between the motherboard…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Print & acrylic draw, enjoy :)
Importante Este proyecto está diseñado exclusivamente para los rollos de 1kg de Printalot (ver fotos y dimensiones adjuntas) Objetivos: Reutilizar los rollos vacíos de filamento Utilizar la menor cantidad de material posible Impresión…
2 Part front adapter to add standard pc fans ot the front of the jonsbo n4. Printed on Bambu Labs A1 mini with tree supports.
Conjunto de cajas para organizar cajones de ropa grandes. Preparado para ikea PAX, de 900 x530, pero valido para otros al tener 12 elementos que puedes combinar y ajustar en escala para otras medidas. Medidas de caja por separado 266X…
The Jonsbo NV10 isn’t well known for good airflow along the GPU side panel, so I designed a custom panel to replace it with something that provides significantly better airflow. It’s designed to work with two 92mm slim fans and a…
Tenbou sticks for riichi mahjong. They're meant to be printed up-right (vertically) to preserve the cylindrical shape. You should be able to print as-is, but a brim may be necessary if you have issues with bed adhesion.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is an adapter for mounting 2.5" SSDs into the 3.5" HDD bays of any Jonsbo N-series case (N1, N2, N3, N4, and N5). Please note that the default version is slightly taller than necessary in order to add additional strength to the screw…
This is a tile rack for Mahjong . It fits tiles that are up to 33 x 44 x 23 mm. The rack is printed in parts that are connected using joints. I printed it with the short edge on the print surface, then it doesn't need any supports.…
🀄 🌬 Sometimes when playing Mahjong , the traditional Chinese tile board game, players need a token or marker to remember which Wind corresponds to them during that game. This design is friendly to non-Chinese speakers, as each tile is…
Jonsbo N3 NAS Front Fan Spacer Included file for screw attachment designed to hold the two halves together with four M3 bolts. Slots directly into place within the case allowing for the original front grill to slot into the spacer. Fits…
Agent Jones [Fortnite Skin]
Indiana Jones idol keychain.
What? A printable solution for mounting two 3.5" hard drives in your Jonsbo D31 computer case, while still allowing for a 120mm fan to be mounted at the front. Note that this requires you to be running a 140mm long power supply in the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Requires a bit of support, Model is pre-hollowed. This is a fictional character and is in NO way is the North Korean leader…. For personal use only, do not use a sex toy even if it's tempting.
Mahjong rack. Only fits 30x23x11mm tiles. Prints in 2 halves with hex pins on an Ender 3. Included the full model should you have a ridiculously oversized printer or just want to scale it down. <3
To reach the 25 models, one last test on Sunday, Darth Vader and Alice , we added Indiana Jones (I must admit that I see the image and my head can't help but hum the Indy theme ;) ) I include the OrcaSlicer file with the filament changes.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Jonsbo N1 is a sleek and modern RAID tower case perfect for a DIY home office server. Set up as a virtualization server, however, the CPU and mainboard area becomes hotter than ideal. Air from the front fan disperses en route,…
Printed with Bambu lab White ABS on a Bambu lab X1C The current solutions using extensions don't look very appealing, so I decided to design a front panel that accommodates fans - it's a complete replica of the original, except for the…
These are the parts I used to make my own freelanced railbus based on the Casey Jones of the Silverton & Northern. https://www.youtube.com/watch?v=1iZ76y9BxHk Category: Hobby
This simple mod will allow you to install two thin 92 mm fans without additional fasteners with standard fasteners that often come with them. The bracket is installed in the upper and lower bars in the spacer. To do this, they must be…
A riichi mahjong compass suitable for use the larger, Chinese, mahjong tiles
Chris de Jongh’s Tripod: https://www.printables.com/model/244504-print-in-place-tripod-v09 This mount should fit all phones with and without cases. It’s meant to be teamed up with Chris de Jongh’s amazing and easy print in place tripod…
Plastic screws for securing the hard drive to the Jonsbo N2 bay.
Three styles of substitute faceplates for the Jonsbo N1 PC case, with vents and 3.5mm mesh clearance, for greater airflow and lower thermals. Simply attach it by using your original faceplate screws and 3D printed washers (no rubber…
Tapa para mantener la temperatura en el interior de la impresora con caja integrada donde poder almacenar herramientas o cualquier utensilio necesario.
![Agent Jones [Fortnite Skin]](https://media.printables.com/media/prints/816760/images/6309874_8eee70b4-62ab-40b0-abc4-e5e24b9af2cf_e9dd50d2-1d39-4d63-b21d-b3c6ecb257ad/image_2024-03-23_184754408.png)
