68 modeli
A two body print that allows for either dual color or partial fuzzy skin. Shown printed on a Prusa XL with 0.6mm nozzle in Prusa Anniversary 2021 PLA. Full size (100 mm x 100mm )smooth, 40mm size with fuzzy loops.
Wydruk około 4,50 €–5,50 € nettoWstępna wycena jednego wariantu
A loopy tree Print using vase (spiral) mode - need a hand? let me know :) I would advise if you want to change filament that you don't do it on a loopy layer. I also have an instructable for a loopy pot that explains the concept behind…
I made this for my son after the first Astrobot game. After the success of the new game I thought someones kids might al
This is a remix of the Ploopy Pick-and-Place Feeder that has been modified to work with the Lumen PnP, along with several improvements to the basic mechanisms to improve reliability. Added a mounting bracket for installation on the Lumen…
I printed a fidget toggle switch and fell in love. The click, the clack, it's on, it's off... amazing. The only issue was in my giant hands, I was unable to keep a grip on it. So I added a loopy ring and now it a perfect for one handed…
Desktop phone stand fits a variety of devices and cases. Compatible with Loopy cases and with Popsockets or other fixtures attached to the back. Print instructions Prints clean with no supports required. Model will come into the slicer…
My tiny hands struggle to reach the furthest 3 buttons from my natural resting position on the ploopy. To solve this I created 3 raised buttons that are 3d-printable to be glued on top of the original ploopy case to raise the buttons into…
A twisted loopy vase printed in spiral mode.
3/20/2024 NOTE: it has been brought up that the (legacy) .3mf file does not import geometry correctly into PrusaSlicer or Cura - I saved it using OrcaSlicer, so if you use that it should work like normal. I apologize for the…
This model uses the Electronic components and the lens from a Ploopy Nano, and replaces the the bearings with BTUs and the Snooker ball with a Pool ball. Basically, it isn't a Nano anymore. Hardware needed: Ploopy Nano pcb and lense 3…
Wanted a much less severe angle to match my keyboards better.
I didn't like the added height that slapping a wedge to the bottom of it adds. So imported the original files into fusion 360, extended the bottom, and then sliced it off at a 10 degree angle. I printed it on a Bambu Lab A1 using the…
Loopy vases, all the same model just scaled differently - the yellow one in the picture is the original model. Print using vase (spiral) mode - need a hand? let me know :) I would advise if you want to change filament that you don't do it…
German below. This little guy is supposed to relieve you of all your stuff in your pockets when you finally get home after a hard day's work and enjoy the end of the day. FLOOPY will gladly take all your keys, sunglasses, watch, chapstick…
A Loopy Halloween Pumpkin. Print it in vase mode, I printed mine at 0.3mm layer height, smaller layer heights will give you more loops. I found the print is most sturdy when I increase the extrusion width to 0.7mm for external perimeters…
I made some button extensions for the Ploopy Adept so that the buttons would sit under my fingers when my hand was in a neutral position. The upper buttons have been swept around the centre of the ball and then cut in a concave spherical…
Notes: There is no universal cook book how to print all of my eggs, but I will tell you all of importants. All of the eggs have little plane on bottom. Brim is recomended! Voronoi Eggs Set travel speed to 200 mm/s Increase retraction (on…
This is a loopy tealight holder. Print the body using vase mode with 0 solid top or bottom layers. Print without supports. Print the top and base as usual. Need help - just ask :) ** I used a battery led tealight, please don't use a real…
Print using vase (spiral) mode - need a hand? let me know :) If you want to make your own designs I have also created an instructable with full Tinkercad instructions here:…
Loopy Joel Telling - 3D Printing Nerd Print in vase (spiral) mode
Loopy Garden pots, two designs. You need to print the pot designs in spiral or vase mode - need a hand? let me know :) Make sure you have at least 3 bottom layers and no top layers. Print the insert as usual, I printed at 0.3mm 40% infill…
Print using vase (spiral) mode - need a hand? let me know :) I used some bent filament to make the handle, you could also use string or ribbon :) If you want to make your own designs I have also created an instructable with full Tinkercad…
I found ball-transfer-units (BTUs) provide a smoother mousing experience. Inspired by bomtarnes . Details about the BTUs I used for this model: R053010810 Bosch Rexroth Ball Transfer Unit US Store:…
Ploopy adept bottom with handwrest
This model is necessary for 3D printing a transparent resin shell for the Ploopy Thumb trackball, as seen in my YouTube video . The increased bridge thickness on the buttons reduce the likelihood of print failing. All the other files were…
I tried (based off of 3D scanned data) to model it as accurately as possible to the original. With all the curvature to the model, there isn't really a perfect orientation to print this in FDM. You can order your own Shell (or parts of…
Here are two simple button caps for the Ploopy Adept trackball. I just wanted to be able to physically locate the left-click and right-click buttons with my thumb and little finger without looking. Included is my V1 and V2 versions of the…
This is a mash-up of a Ploopy Nano BTU mod and a CRKBD (original on Thingiverse: https://www.thingiverse.com/thing:4549765) At the center is the Nano and then off to either side are the Corne halves. This setup basically removes the…
These ready to print drop-in inserts will help you convert your Ploopy Rev. D from using the standard roller dowel style bearings to 2-mm ceramic G5-grade bearings. It may work on earlier revisions of the Ploopy, but this is not the STEP…
I do not own a Ploopy Nano myself so I was unable to test this. One person has successfully printed this model and it seems to work. See comments for more details. Print at your own risk.
Ploopy's Github has multiple versions of the scroll wheel across the STEP and STL files. I struggled finding the most current version, but now I have gathered all three parts and posted them here. As of 02-Jan-2023, these three files are…
Update 2025/03/16 V3: After use looks like 2 magnets are good if positioned closer to the wheel so updated the carriage. Update 2025/03/08 V2: Updated for 1/16 magnets (N52). The magnets are set to push each other so the wheel wants to…
The tail end of this model is 170% the length of the original model. In total, it adds about 4cm of extra space for your palm to rest. It's not pretty, but it feels way better for my hand. The parts are backwards compatible so, you could…
I made this small little riser so that when I tented my keyboard, I could also lift up my ploopy nano to match the keyboard height (2 inches in this case). I used books/notebooks but they took up space where I wanted my keyboard and the…
The Ploopy Nano is a great little trackball that's just a trackball. No mouse buttons! There are, however, contacts on the PCB to put the trackball into bootloader mode (by shorting them with a paperclip), and these can be used to add a…
I am a very novice CAD user, so the STL has a lot of flaws - not smooth edges, lacking symmetry, etc. I really wanted to mount a trackball to my ZSA Moonlander, particularly for my right thumb. I took a BTU mod of the top part of the…
An angled palm rest for the ploopy adept to compliment this mod https://printables.com/model/799504-ploopy-adept-wedge The cut-out in the middle is approx approx 81 x 76 x 4mm, you can cut out eva foam or a gel pad to insert into it.
Fair warning. I've used TinkerCAD because I lack proficiency in other, better/professional solutions. After purchasing the Ploopy Thumb Trackball, I knew I would be immediately adding the Rexroth BTU mod as well as adding a steel…
Ploopy Nano + BDN9 (I don't have a BDN9) Macro pad dimension area: Nano_BDN9.stl - 73.5mm x 73.5mm x 15mm Nano_BDN9_v2.stl - 74.1mm x 74.1mm x 15mm Ploopy Nano + YMD09 QMK Nano_YMD09 - 10.4 degrees of tilt, no access to reset port…
Cut a whole in the stand to allow for a Loopy case to fit it
(as can be seen, I need to restore the colour on my Loopy, it's arrived in quite bad condition) Seperated the window from the model so it can be printed transparant (will need to be glued in place). Models were resin printed for best…
Relies on the original Kensington Expert bracket, this slots into that bracket and the two notches on the ploopy adept. Can be printed with no supports (it just has two small straight overhangs). Increase walls to 4 or 5 for some strength.
What This driver cap can increase volume your Ploopy Headphones output. There are several variations, but all now utilize aligned magnet holders, moved 1.6-1.7mm closer to the driver. How To fit it in, you will need to cut off some…
I love the Ploopy Trackball but needed more of an angle for my wrist so I made the Ploopy Wedge. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20 Infill: 15-35 Notes: I went with 35% infill to…
I had trouble getting the main “left mouse button” to click. It seems like there was a lack of clearance on the parts I printed between the main buttons and the wheel mount. This model gives an extra 2mm of space to the two faces closest…
Hi Everyone. As I believe that the Adept trackball is the best you can get, I bought another to use for work. Transporting it in my laptop bag concerned me as the bag gets thrown around a fair bit so I’ve designed a case for the main body…
A dust cover I made for game cartridges of the greatest gaming console ever made - the Casio Loopy. Note that the kana below LOOPY may not print clearly due to the fine details of the characters.
The thumb rest of the Ploopy Mouse felt really uncomfortable to me and most importantly made it hard to lift the mouse. I tried removing it from the model; I couldn't do it so I took to fiverr and paid somebody to do it for me. They did…
Just a bunch of different knobs for the A+
Recently got my Ploopy Knob using it in the scoll, the smooth surfaced moved under my finger a bit too easily. Created a finger groove and some knurling around the end for a bit more of a “grippier” spin. This is the top only. No…
You will need the Ploopy Knob since you will need the base already, this is only the top part of it. Print with default supports, with basically default bambu settings. Only add brim the finger groove divet thing. How to assemble you will…
Fair warning. I've used TinkerCAD because I lack proficiency in other, better/professional solutions. After purchasing the Ploopy Classic Trackball, I immediately downloaded and printed the BTU mod as well as adding a steel trackball for…
Ploopy Nano 2 Big Button BTU mod of the original Nano 2 case. Top and bottom shell modified to accommodate Bosch Rexroth R053010810 BTUs and larger button. The BTU placement has been designed for a 40mm ball, but it works with the stock…
The Ploopy A+ is a great trackball, but by default the scroll knobs are at the bottom, requiring you to tuck your thumb under your hand to use them. Or to move your hand entirely. Both are uncomfortable, in my opinion. This base rotates…
The left-hand version of the Ploopy Adept tent wedge: https://www.printables.com/model/799504-ploopy-adept-wedge It is a mirror of the original model by flipping the left and right side, made for left-hand use.
Bonjour, Voici ma participation au concours de modélisation et d'impression 3D Loopy Looper (organisé par Cults3d). C'est un Loopy Looper 4 en 1 !! Vous pouvez faire tourner la bille, la faire sauter, la faire tomber au travers un oloïde…
Mod to replace the roller bearings with BTUs on the Ploopy Classic 2. The compatible BTUs are the BOSCH Rexroth R053010810 KU-B8-OFK (available on keycapsss.com if you're in the EU) or, alternatively, the CY-8H from Aliexpress . You can…
another vasemode object, i printed at 1.2mm walls, .18mm layer height.
Simpel raiser block for a Ploopy Nano track ball. Ergonomically shaped to avoid sharp edges in the palm of your hands. The original case fits right in! Raises the Nano with 4.5 cm.
This is a grip for an O3DS that's been hardmodded with a capture card. The grip has a big hole in it that the extra girth can slip right into, nice and snug.
This is a mechanism to turn the Ploopy trackpad into a clickpad. The design is heavily inspired by the Apple iPad Pro keyboard's trackpad mechanism and can be clicked anywhere on its surface, unlike many laptop clickpads. Even though it…
This case allow you to tripod mount your Ploopy Adept or in various positions on the edge of thinner desks. Inspired by Ben Vallack's video: The Perfect Tenting Solution for Split Keyboards . Hardware 1/4“-20x6.4 Brass Heat Set Inserts
This is a simple headphone holder that I made for my pair of Ploopy Heaphones. I designed it for Spax 4x20 wood screws but should work with anything that fits the hole. If you want to modify the model, you can either use the .step-file or…
Raised caps for the top row of the Ploopy A+, remixed from @Karl_run 's Adept version . The Adept caps are close on the A+ but the button outlines are different, so these are rebuilt rather than edited from the original mesh. The outlines…
this tent works with the btu short mod brom br3chtel: https://github.com/Br3chtel/PloopyThumb-SizeAndBTU
An adapter shim for fitting size 7.5 Veichu BTUs (~9mm wide) as used by the original Ploopy Adept BTU mod into the Anyball mod , which expects size 8 Rexroth BTUs (~12mm wide). Created because we migrated from the BTU mod to the Anyball…
A case mod and a separate dock for the Ploopy Adept trackball to be used on a typical flight or driving sim rig. The models assume a 40xx series extruded aluminum profile as the basis for the rig structure. Provided holes accommodate up…
These ready to print drop-in inserts will help you convert your Ploopy Rev. D from using the standard roller dowel style bearings to 2-mm ceramic G5-grade bearings. It may work on earlier revisions of the Ploopy, but this is not the STEP…
