463 modeli
A striking oversized hexagon fidget toy designed to fill the entire print bed of a standard 256×256 mm printer. 🔷 Can be flipped, rotated, spun, or simply used as a visually satisfying desk piece 🌀 Smooth geometric surfaces create a…
Wydruk około 8,21 €–10,04 € nettoWstępna wycena jednego wariantu
Klasická hrací kostka - tento konkrétní model využit na aktivitu pro Beeboty, proto výtisk zvětšen na 4 cm. Zkoušeno tisknout se 100% výplní (viz Gcode) i se 40% výplní - těžší kostka se lépe přetáčí.
Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. New Version V2!!! No support…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
It should also work for Thule RideAlong, but I have not tested it. Center distance between metal bars is 89 mm. I made two versions, a screw and a bolted version. Screw version: Made for a Ø4 mm countersunk screw with a head diameter of…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. No support needed Colour change at…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
2x4 holder for a full 4 piece set from Mastercraft!. Possibly one of my favorites I've designed so far, the dimensions are quite pleasing. Works a treat! Step files included for modifications.
Wydruk około 3,87 €–4,72 € nettoWstępna wycena jednego wariantu
I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…
Intro This is an improved version (V2) of a super fun mini frisbee. Despite its compact size and low weight, it flies smoothly and stably , making it perfect for outdoor play anywhere — park, beach, garden, or on the go. Its lightweight…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
Use brim, no supports required. A large slinky-style fidget toy designed for stretching, compressing, bending, shaking, and general sensory interaction. The toy measures approximately 175 mm in compressed height, but can be extended to…
Designed to be printed and used for teaching proper brushing, flossing, and water pick techniques. Gaps between the teeth will allow full demonstration of flossing in particular. Model in the photo is printed at 200% of normal adult size…
You can use this maxi paper clip to join paper or just as a bookmark. Dimensions are 39 mm x 110 mm. It's a good idea to print the staple as tight as possible.
Überrasche deine Liebsten mit einer kleinen Aufmerksamkeit. Der Druck ist nicht nur für Kinder, sondern auch für Erwachsene geeignet. Wähle aus einer der sechs Varianten oder drucke gleich alle gemeinsam. Nicht vergessen: einzigartiges…
Źródło oznaczyło ten model jako treść 18+.
Hello! I'm offering this set entirely for free! It is intended as a demo of what the rest of my line of digital files looks like, so I do hope you give it a try! Upon downloading these files you will find, as always, a complete…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Join my discord to request any custom version! New: O4 Pro support! All O4 versions are made…
This is part two of a remix of 2 voron mods: the 2.2 Z-belt covers with hidden cable routing and the matching cover inserts. Its purpose is to keep as much heat inside the chamber as possible by shrinking the opening for the Z-belt in the…
lightweight and easy to print. correct flow direction adjustment ability no supports needed for fan fastening you need to cut m4 thread in hole. i used self made m4 tap and m4 x 20 screws. use standard print settings. don't forget to…
The clear look of someone giving it their all, trying to achieve "maximum effort." Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Height is 2.4mm Filaments Used: PLA Ziro Black Transmission Distance: 0.5…
Ikea Maximera and gridfinity I needed some quick cleanup for my workshop, so I caved and bought a couple of 60x60 Ikea kitchen cabinets to quicky get organized. https://www.ikea.com/dk/da/p/metod-underskabsstel-hvid-50205626/ I am filling…
This is part one of a remix of 2 voron mods: the 2.2 Z-belt covers with hidden cable routing and the matching cover inserts. Its purpose is to keep as much heat inside the chamber as possible by shrinking the opening for the Z-belt in the…
This keychain hanger prints in 4 parts. Make sure your prints don't have any elephant foot. The parts will be glued together with CA glue. Inspired by: https://www.thingiverse.com/thing:3733520
This is a collection of 3 different Maxis style stock parts. Most of these parts fit interchangeably for preference. You can print most of these anywhere between 15% and 100% infill for the desired durability/cost ratio you prefer. None…
Jig I found were not correctly sized, so I decided to draw a correct one. Printable on any 22 or 23cm bed size. Left and Right Jig for installing custom front on Ikea Maximera/Exceptionell drawers Your front should be cut with -0.7mm than…
How to and schematics in progress! WARNING! This is a pretty advanced build! You have to know your way around with soldering lots of tiny and fragile wires, electronics etc. There is no programming involved but you need a steady hand and…
From the Good old Days, My version of a Puch Maxi cylinder an cylinder head. Layer hight 0,2 mm
In the slicer, use the spiral function and set the cooling to 100% and the volumetric velocity to 99 mm/s. Change the speed every few layers with the command M220 S and after the S write the speed percentage of the first set speed…
A high-flow main board cooling fan cover for the Ender 3. (Stock fan on stock metal cover) This cover flows much, much more air than the smaller fan covers available to print. Installs using factory hardware. Print Settings Printer Brand:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Größe: etwa 12x8 cm Material: PLA oder PETG Edit (Maxi): alternatives, dickeres Gitter hinzugefügt Falls du keinen eigenen Drucker hast und in Deutschland wohnst, kannst du die Schale auch bei mir im Shop bestellen:…
The Maxima-a Heavy Cruiser appeared in the Poe Dameron Comic. This model is based on its earlier appearances. (There were many changes in later issues and I like the earlier version better.) The model is 122mm long, 103mm wide and 51mm…
Print in PETG with 20% infill and 3 walls I recommend using snug supports Imprime en PETg avec 20% de infill et 3 perimètres je recommande d'utiliser des supports Snug
Since the Ikea Exceptionell drawer has not a rectangle-sized storage area, I designed these boxes to make best use of the available drawer volume. An Exceptionell (Maximera?) 60x37 cm, middle height drawer can exactly fit 2 of these on…
Laptop stand with very good air flow Great for gaming laptops. you need: 1x left part 1x right part 2x connecting part You can use glue but it is not required to connect the parts
A Radio-frame for a Fiat Ducato Maxi. Its DualDin. Prints without the need for supports. I suggest to screw and glue it together. May be a tight fit, depends on your settings. I designed the upper part so that it's protecting the screen…
UCI's own version has been released! The same day I posted this I got the link for UCI's own version: https://www.uci.org/equipment/bh2JJzw1eB0n876rX2iB1 This will take you to the “Equipment” page. Scroll to the bottom and expand “UCI 3D…
Creality K1 belt clamps. Added as much material and strength in this tiny part as possible. Print in ABS/ASA-CF/GF or HT-PLA-GF or PPA-CF, 0.2 layer height, 3 perimeters, 100% infill. Holes are 2.8mm - slightly undersized for better…
So that you can also see the flames from the addon Carnage at Devil's Run on the road. It took a few attempts to find the right size. For the cars, simply clip them on the roof and for the motorcycles, from the big rig and the final five…
This is my scratch built version of Maximilian from The Black Hole. One of my favorite robot henchman to ever grace the silver screen! I used PETG pink grapefruit for the translucent visor at 50% infill and I think it came out rather…
English: Introduction: This 3D printed container has been specially designed to securely and compactly store a BIC Maxi (J26) lighter and two cigarettes. Ideal for cigarette breaks, it effortlessly fits in your pants or jacket pocket…
Puch Maxi-S 1974 - 1976 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
Boxes to fit neatly into the funny tapered part at the side of your Maximera drawers, leaving an exact number of Gridfinity grid units in between (5 for the 400mm cabinets). These are all left side boxes. Mirror in your slicer to get the…
Update 9-1-23: Added the single piece version for bigger print beds. The included .3mf has a modifyer box to make the floor part with honeycomb infill and no top-bottom layers This is a printable basket for the MAXIMERA drawer of Ikea…
This is a combination of two parts to allow the installation of the maxi cosi see camera on the babyphone holder via the base mount connector .
Is split for printing. takes some 1/2 and 11/4 in dowels for strength. is about 45 inches long ammo pack files https://www.printables.com/model/1551579-maxigun-ammo-pack-helldivers-2
Maxis introduced a new brand identity in 2014 that maintains essentially the same logo, but with the squiggle on the letter i in a brighter shade of green. The squiggle and bright green colour are used throughout the new corporate…
Gridfinity base plate for 40x60 cm IKEA MAXIMERA drawer. The base plate is 9 mm higher at the bottom so that 7 complete cells can fit next to each other. ------------------------------------------------------- Designed with the help of…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
its the Maximally constrained Z-belt covers for Voron 2.4 but for the other side with the right voron logo
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Storage plug to not damage the fins of your Maxim Defense brace while in storage.
Remix of a Remix, I have removed 15mm from the front wings so they do not interfer with the base.
WORK IN PROGRESS! Now its possible to install one or two Fans with each maximum 180mm. Be sure to use 24v Fans or install a step down converter (buck converter) to reduce the Voltage your specific Fan. The mainboard supports (i think)…
This footprint extender is a convenient solution to increase the storage space of your 20cm IKEA MAXIMERA/METOD pullout, overcoming its awkward shape and limited footprint. Simply print three of these extenders using your 3D printer and…
La modif sur le boitier pour speeder pad est de pouvoir le mettre à droite ou à gauche de l'imprimante et d'avoir accès au port usb4 et rj45 pour l'écran Wimaxit il est monté sur ma SR carte mère Manta et BTT CB1 sur le pour HDMI
The Mk3 firmware limits the X axis range to 0 to 255mm and the Y axis to -4 to 212.5mm. The negative Y area is usually used for the purge line. We can adjust PrusaSlicer and allow a model to use the additional Y area. The Bed Shape Y size…
Printed on the printbed in PET I used a piece of scotchbrite to filter the particles. Feel free to use this design. It will print without support material. Add a little self tapping screw in the center to fix the little cap. Print…
This is a 3D-printable replacement mount for the Maxi-Cosi See Pro 360° Baby Monitor . It is designed to match the original mounting piece that comes with the monitor, allowing it to attach by inserting and twisting into the bottom of the…
This is a “complete” set of Gridfinity battery storage that aims to maximize space and fit as many batteries as possible in a relatively small footprint. The AA and AAA have ½ cutouts on either side, so if you line 2 bins up together, you…
A simple model designed to replace the original ammo tokens in the boardgame Maximum Apocalypse. I designed the ammo tokens to look like a stripper clip for an old Lee Enfield rifle, but found that single line of bullets was to fragile,…
Ikea Maximera 40 x 37 Cutlery Designed to take all Silverware in small drawer. Befor that, I had used 2 drawers for this stuff, now only one :). This Part can be printed in 4 piece parts and glued together. Glueing is optionally, in…
Excavator Iron Beads Maxi , designed for my son. You need to use Maxi/XXL beads
Hi, I've created a versitile Organizer Box generator based on Alexandre Chappel assortment boxes I made this specificly for my Ikea Alex (small unit) Drawers to fill a grid of 6x10 + small filler (included in files) in almost any…
Can't get enough Nintendo Switch Games holder, well now you can print an infinite holder! This is the extension for my Nintendo Switch Game holder. Print enough to hold all and I mean you can print enough to hold alllll of the NS games.…
Sortierungsboxen für Maximera Schubladen mit der Höhe 7,8 cm. Mit der Step Dabei können die Abmessungen nach belieben angepasst werden. Gedruckt in PLA
for stock hotend (will make for volcano later) farther from heatblock correct flow direction adjustment ability no supports needed for fan fastening you need to cut m4 thread in hole. i use self made m4 tap and m4 x 20 screws. use…
Tractor Iron Beads Maxi , designed for my son. You need to use Maxi/XXL beads.
A simple hexagonal tray, designed around the Mini's build volume and a 200x200mm sheet of stick-on felt. The straightforward shape makes padding the inside easy, though some creativity may be required for marking the lines to cut. It is…
This model is inspired by Maxim and Vickers, 1st World War machine guns. Model composed of 3 parts that “snaps” together. Main “striker” part with fake levers, cartridges in and out holes, levers and actuators Cooling canon Nozzle Each…
Um das Verrutschen zu vermeiden, habe ich ein Dichtungsband verwendet.
Print in something that can take heat (i printed in ASA). TPS sensor mounting to the bracket: 7mm m4 nut and bolt combination TPS bracket mounting to the throttle body: m4 bolts with very wide m4 washers.
100% Ersatz für einen defekten Deckel bei einem Swiing Seilzugstart für Puch Maxi E50 mit eingelassenen M5 Muttern zum einfachen Festziehen mit Swiing Logo gedruckt in PETG
Print multicolor version using MMU or IDEX printers. Also great for learning ins and outs of your favorite slicer software. With Ultimaker Cura you can even design your own infill. Does PrusaSlicer have this ability? I print with open top…
Maximum Overdrive - Green Goblin Truck - 1986 3D printable model.
Two of the change gears in the thread-cutting / feed gearbox on our Emco Maximat Super11 lathe at Stockholm Makerspace had broken teeth after a crash, and spares were very hard to get, so I designed and printed these change gears. They…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
Gravity Holder: Minimal Design, Maximum Hold Description : Elevate your organization with the Gravity Holder , a sleek and innovative solution designed to securely hold photos, notes, and documents with style and ease. Using steel…
If the snip-in of the maxi cosi locking mechanism broke, you can print a new one. For sure you can deal with the customer support at some point and they will help you. But for a quick fix this is a great solution. If you are missing the…
Capybara Maximus – Emperor of Chill Behold the noble ruler of relaxation: Capybara Maximus ! Draped in a Roman toga and crowned with a laurel wreath, this dignified capybara stands tall (and totally unbothered) as the sovereign of…
WIRE SHIELD V3 PLUS REMIX @Maximotep
This is a figure of anime character named Migi from anime series Parasyte: The Maxim. When i printed this i used glue to join it together, then i sanded it and painted I printed it with 0.05mm layer height and 0.25mm nozzle on my Prusa…
A remix of space-optimized-box-for-ikea-exceptionell-maximera. I reduced the height to fit single space, low drawer. dimensions are 6L x 4.75W x 2.25H My first edit! printed well on bambu p1s.
NOTE: this is not meant to be 100% historically accurate. No two pictures or descriptions you find of this online agree with each other about dimensions and other things. Plus, over many centuries the structure changed and was expanded.…
The Maxim Pro Dual Mag Release is a 3D-printed mag release upgrade for the Adventure Force Maxim Pro. Featuring a similar paddle to the stock mag release, this part also includes a secondary extended paddle closer to the blaster's grip.…
This is a convection based "roof vent" based on the "Maximum" brand style. I used it to ensure the sand would dry in the sandbox even though the cover is on. I suppose it can be used on any horizontal roof of enclosed spaces. To put on a…
maximera nahradny drziak, ktory drzi vrchy hrncov v kuchynskej linke od ikei supporty su uz spravene, treba odrezat potom
I'm new to 3d printing and model creation so feedback is welcome. Fits nice and has 6x 43mm and 2x48mm holes, these are most common box dimensions here. Onshape link:…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone Looking for a practical and modern phone stand that fits your everyday needs? These 3D-printable phone…
Passend für Bosch Indego 1200 Gedruckt aus ABS mit 0,2mm Schichthöhe. Am besten keine größere Schichthöhe, damit die Stollen ohne Stützen gedruckt werden können. Es werden nur Stützen für den Anschluss gebraucht.
15-20% Infill (Dependent on selection for reliability but mainly preference) 20-30 Degree TREE Support Recommended (30 may involve excessive support removal) Scale is ready to print though models with more thin areas could do with scaling…
This is a fuel cap for a Puch Maxi N/L. The fuel cap should be printed in PETG because of the fuel. I printed the sealing rings in 95A TPU. I uploaded different sealing rings because every tank opening is slightly different. It's…
I lost the rod mount for my Ikea Maximera Drawer so I designed a new one. Maybe you need one too. I just remodeled the original design so it's basically a 1:1 clone The photos are from a prototype. The only difference to the final version…
Make better use of the space in your cabinet and hang up the GHL doser and Profilux
This is a GoPro mount adapter for the Maxi-Cosi See Pro 360° Baby Monitor , allowing you to attach the camera using GoPro -style mounting hardware. It features the male side of a GoPro mount, making it compatible with standard GoPro arms,…
This is a drop-in, dual-stage trigger mechanism for the Adventure Force (Dart Zone) Maxim Pro. This requires no additional hardware Includes: Dual-Stage Button Linkage (Supports required. May also require a bit of filing on the slope)…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Use case and history of this design I have a RaspberryPi running 24/7 that monitors the solar charging and batteries at our local model flying club. In the middle of the summer, temperatures become very hot in the cabinet and we had…
I've got some small things lying around in my drawer and alsway they hide themselves from me. Therefor a small inlay that sits on top of the rails and that holds small items like pens. For reference (first measure your drawer before you…
Quick vase mode print to tune Jerk. Goal; print model in vasemode with increasing jerk settings, then measuring which jerk value is the lowest possible, without sacrificing quality
