75 modeli
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Ikea Maximera and gridfinity I needed some quick cleanup for my workshop, so I caved and bought a couple of 60x60 Ikea kitchen cabinets to quicky get organized. https://www.ikea.com/dk/da/p/metod-underskabsstel-hvid-50205626/ I am filling…
Jig I found were not correctly sized, so I decided to draw a correct one. Printable on any 22 or 23cm bed size. Left and Right Jig for installing custom front on Ikea Maximera/Exceptionell drawers Your front should be cut with -0.7mm than…
Since the Ikea Exceptionell drawer has not a rectangle-sized storage area, I designed these boxes to make best use of the available drawer volume. An Exceptionell (Maximera?) 60x37 cm, middle height drawer can exactly fit 2 of these on…
Boxes to fit neatly into the funny tapered part at the side of your Maximera drawers, leaving an exact number of Gridfinity grid units in between (5 for the 400mm cabinets). These are all left side boxes. Mirror in your slicer to get the…
Update 9-1-23: Added the single piece version for bigger print beds. The included .3mf has a modifyer box to make the floor part with honeycomb infill and no top-bottom layers This is a printable basket for the MAXIMERA drawer of Ikea…
Gridfinity base plate for 40x60 cm IKEA MAXIMERA drawer. The base plate is 9 mm higher at the bottom so that 7 complete cells can fit next to each other. ------------------------------------------------------- Designed with the help of…
This footprint extender is a convenient solution to increase the storage space of your 20cm IKEA MAXIMERA/METOD pullout, overcoming its awkward shape and limited footprint. Simply print three of these extenders using your 3D printer and…
Ikea Maximera 40 x 37 Cutlery Designed to take all Silverware in small drawer. Befor that, I had used 2 drawers for this stuff, now only one :). This Part can be printed in 4 piece parts and glued together. Glueing is optionally, in…
Hi, I've created a versitile Organizer Box generator based on Alexandre Chappel assortment boxes I made this specificly for my Ikea Alex (small unit) Drawers to fill a grid of 6x10 + small filler (included in files) in almost any…
Sortierungsboxen für Maximera Schubladen mit der Höhe 7,8 cm. Mit der Step Dabei können die Abmessungen nach belieben angepasst werden. Gedruckt in PLA
Um das Verrutschen zu vermeiden, habe ich ein Dichtungsband verwendet.
A remix of space-optimized-box-for-ikea-exceptionell-maximera. I reduced the height to fit single space, low drawer. dimensions are 6L x 4.75W x 2.25H My first edit! printed well on bambu p1s.
maximera nahradny drziak, ktory drzi vrchy hrncov v kuchynskej linke od ikei supporty su uz spravene, treba odrezat potom
I'm new to 3d printing and model creation so feedback is welcome. Fits nice and has 6x 43mm and 2x48mm holes, these are most common box dimensions here. Onshape link:…
I lost the rod mount for my Ikea Maximera Drawer so I designed a new one. Maybe you need one too. I just remodeled the original design so it's basically a 1:1 clone The photos are from a prototype. The only difference to the final version…
I've got some small things lying around in my drawer and alsway they hide themselves from me. Therefor a small inlay that sits on top of the rails and that holds small items like pens. For reference (first measure your drawer before you…
Remix of the Ikea Maximera drawer box for use with Gridfinity by @Larswa_128713 that just customizes some measurements. I slightly modified the model because I don't need the top tabs and printed a bunch of different length's to fit…
Uchwyt montowany na bocznym relingu umożliwia bezpieczne przechowywanie cylindra do SODASTREAM.
Připravil jsem remix modelu boxu a organizéru mlýnků s kořením tak, aby co nejlépe využil prostor středně vysokého šuplíku o rozměrech 40x37cm. Je zde několik modelů: MaximeraBox : zúžený původní model na šířku běžných sáčků s kořením a…
English - see below Besteckkasten für die kleinen 40x37 cm IKEA MAXIMERA Schubkästen. Leider gibt es von IKEA keine passenden Besteckkästen für diese Schubladen. Daher habe ich einen entworfen, der meinen Ansprüchen genügt. Insbesondere…
No magnets in this one.
Here’s a way to make your spacious MAXIMERA drawers even better. The sides give your drawers a finished look and prevents things like frying pans and baking molds from sticking out on the sides and preventing smooth closure of the…
A set of bins which line the curved side of wide Ikea Maximera drawers and make space for gridfinity baseplates. I used @Niggl design to make a set of bins which fit the length of the drawer on either side. One set is the original width…
Cuttlery Organiser for the 20cm Maximera Drawer
Plate is made from 5mm plywood. And holder are assembled with 2xM3 hex bolts. PETG white 0,25mm/layer 0.4nozzle
Simple system to turn a 24" depth Maximera Medium (US version) drawer into filament storage. 14 easy access spools per drawer plus space behind them for a couple more less convenient but still accessible spools. Includes files for…
A simple parametric handle. It was designed to utilize the space between the inner drawer in Ikea Metod furniture. With a width of 16mm, it ensures that the outer drawer closes smoothly without obstruction. I used it as a handle for…
Wanted to better organize the spice drawer in the kitchen. So we bought this set of 48 spice jars at Bol. They are circa 45.5 x 45.5 mm wide each. They fit very nicely in our kitchen drawer (IKEA Metod / Maximera) however they can still…
Assortment boxes in two sizes, 150x80x42 and 240x55x42 mm, that can be used on their own but is mainly designed to be used together with https://www.printables.com/model/710404-stackable-assortment-box-mark-iii/files to completely fill…
Replaces part no. 126889 for attaching the drawer fronts to the drawer on medium and tall Maximera drawers. Modeled directly off an original part, rails snap in and are held securely like with the original. UPDATE 09/09/2025: Added V2…
I wanted a drawer organizer for the small Ikea kitchen draws (60x37 cm) to store our bin and freezer bags efficiently.
IKEA Maximera draw offered too little space for my spices that's why I design that organizer. It can be stacked on the top square shaped rods with ease.
If you have problem with stuff falling out or catching when closing a drawer this is for you. This model is for the MEDIUM drawer (5cm between the drawer and the "bar"). For 37cm depth of drawers you need print both A and B and they…
My Familiy loves Tea and i hate almost empty Tea Boxes. We just got a whole drawer full of Tea and i wanted to make everything more 3D ;) Just stared some weeks ago, but want to finish it quick for the competiton. With this Organizer you…
I wanted to install some Ikea Maximera drawers in my existing cabinet. The cabinet widht was 6mm wider than the common cabinets so I created some spacers (3mm each) to fill the space. To use the jigs : begin at the top front, the jig can…
The IKEA Metod Maximera 20 cm width, full hight drawer will swallow twice as many bottles with this fix. Due to the curved sides on the sides the actual floor space is reduced and can not contain as many bottles as it looks at first…
I was annoyed by the soda stream cartridges always falling over in my kitchen, so I designed a holder that holds them in place on the rear wall of the IKEA Maximera drawer.
You can put 7 of the holders horizontally plus and left end piece to fill the width of the Maximera kitchen drawers. I've made a universal version that holds several other jars, plus 3 universal double-sized versions. To avoid movement…
needed are 32 wood screws of choice to mount the parts to the tables underside. the dimensions are: 285mm x 39mm x 100mm I printed it horizontally angled on a Prusa MK3s+ with a 0.6 nozzle (0.4 works fine too) Happy printing :)
There are several side boxes for Maximera drawers to fill the sloped space left and right to a Gridfinity grid. Unfortunately these will not fit exactly in the shorter 31cm drawers that are in 40cm cabinets. This design is intended to be…
No magnets in this one.
A left and a right corner that allows you to use the Maximera drawer without a front board. So you can put a printer in the drawer without it drooping, and still access the control panel and open the door and stuff. It's a bit of a…
Tassimo-Kapselhalter (14Kapseln) als Inlay für Schublade IKEA Maximera ausgelegt um in die flache Schublade zu passen mehrere kommen nebeneinanger bzw voreinander
Are you tired of the mess? Ikea and Amazon spice racks are ridiculously overpriced and dont really fit? Well look no further! I have laser scaned the IKEA Maximera drawer and designed this spice rack to perfectly fit your drawer and…
Remix of the IKEA MAXIMERA drilling jig with a symmetric left/right design, so a single piece works on both sides. This reduces print time and saves nearly 50% filament compared to separate jigs. Hole positions follow standard spacing: 32…
the smaller one is not finish, it's a prototype for the back of the drawer, it is for ¾ *¾ aluminum or wood profile. check picture, I have include multiple version of it pm me if you have question, I'm not use to post my thing I made it…
Después de cortar el cajón maximera para que no tropezase con el sifón, queda un corte feo y las cosas que se guardan en el cajón pueden tropezar igual. Con este diseño queda más bonito, profesional y protegido. Print Settings Printer…
Ikea Maximera replacement Part 147230 or 147231 (1) thread M9x1
Maximex Feuchtigkeitkiller 5kg (Wenko ?!) wurde nur mit einem Ablagegitter für nur einen Granulatblock geliefert. Hier könnt Ihr Euch noch einen zweiten ausdrucken.
Replacement part for Ikea Maximera drawers. These parts are usually delivered with drawer and are used as cover and as bracket if side glass panel are mounted. Ikea respective part numbers corresponding to the models are in table below.…
Ikea Maximera replacement Part 147230 or 147231 (2) Print Settings Printer Brand: Bambulabs Printer: Bambu X1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Filament: Bambulabs PLA Blue Notes: Recommend PETG Category: Model Furniture
Print 4 of these to mount your maximera drawer under your desk. Needed are 3-4 wood screws for each. (and the screws you get with the drawer) I recommend installing two on one side and then the two 71cm apart on the other side. I printed…
Extension sidewalls for Ikea Maximera drawer Suitable for drawer with space 52 mm under side bars Including holder for back extension - for example acrylic (or any other material) strip 5 mm thick Part 1 - 1 pc front left and 1 pc front…
I made a edge for the open sides of the Ikea - Maximera. I scale it to a length of 400mm, for my use. Scale it for your print bed size in one part or multi parts. Top 110 x 20 x 15mm Bottom 175 x 20 x 15mm
Who is Max Faget? - Space Center Houston Full-scale replica of the early Space Shuttle orbiter prototype model that belonged to Max Faget, now on display at the Shuttle Atlantis Visitor Center at the Kennedy Space Center, Florida. Note:…
I am using powder deteregent for my dishwasher and have a 20cm IKEA Metod cabinet next to it with the pull-out Maximera frame installed in it. The deteregent comes in a fragile plastic bag, so I needed something to store it in -> designed…
Der IKEA Maximera Gewürzständer ist eine praktische und platzsparende Lösung, um Gewürze und kleine Küchenutensilien ordentlich und übersichtlich aufzubewahren. Er lässt sich mühelos in verschiedenen IKEA Maximera Schränken und Auszügen…
This is a sliding tray for the medium and tall IKEA Maximera drawers which have the upper rails. It fits the drawers sized for the 15 inch wide cabinets. The tray is split into two identical halves. Print the halves in the default…
When moving, I left behind the original tray I made about 15 years ago from PS and wood. Ideal oportunity to recreate the thing for 3D print and here we go. I used pristine white PLA to fit the kitchen and glued it all together with CA.
I've created a more stable version of the attachments to avoid the struts from sliping/bending. I have placed some rubber tape pieces (as you can see in the pictures) to keep them in place better (and it works very well). So the chaos in…
This insert is designed to fit inside an IKEA Maximera drawer and holds eight IKEA CITRONHAJ spice jars (10 cl / 42 mm diameter) securely in place. The jars stay neatly organized and won’t slide around when opening or closing the drawer —…
temperatura di stampa: piano 45 gradi testa 220 gradi velocita di stampa 200mm/s layer: ho messo 0.2 ma va benissimo anche 0.1 riempimento: 15% (consiglio di non scendere sotto il 10% ha presentato vari difetti) Category: 3D Printing
Printed in PETG with 0.12 layer height (for the small clip features) on an Anycubic Kobra S1.
Organizer set for the top drawer of an IKEA METOD sink cabinet with a MAXIMERA drawer, medium, 60×37 cm (same drawer shape as EXCEPTIONELL). Everything prints without supports and is in daily use in my kitchen. What goes where 4 side…
Modified to accept broom stick of 22-23mm
This modification turns an IKEA MAXIMERA drawer into practical filament storage inside a METOD cabinet. The original wooden drawer bottom is replaced with an open frame made from 3D printed side rails and four aluminium tubes. The spools…
Gridfinity baseplate sets for MAXIMERA (METOD kitchen) drawers, 60 and 80 cm wide, in the 60 cm and 37 cm depths. Each is sized to IKEA's published inner floor . Dimensions used (manufacturer-published inner sizes): IKEA customer service…
End baseplate for Brasa ikea maximera baseplate
A practical remix of the IKEA MAXIMERA Gridfinity-compatible bin , keeping its drawer-fitting shape while making small items easier to retrieve and the contents easier to label. The main improvement is inside the container: rounded…
Gridfinity baseplate set for the 40×60 cm MAXIMERA (METOD kitchen) drawer, sized to IKEA's published inner floor of 280 × 504 mm. Three tiles (6×4, 6×4 and 6×3) plus edge strips. Dimensions used (manufacturer-published inner sizes): IKEA…
This is a sliding tray for the medium and tall IKEA Maximera drawers which have the upper rails. It fits the drawers sized for the 15 inch wide cabinets. The tray is split into two identical halves. Print the halves in the default…
Are you tired of the mess? Ikea and Amazon spice racks are ridiculously overpriced and dont really fit? Well look no further! I have laser scaned the IKEA Maximera drawer and designed this spice rack to perfectly fit your drawer and…
Replacement part for Ikea Maximera drawers. These parts are usually delivered with drawer and are used as cover and as bracket if side glass panel are mounted. Ikea respective part numbers corresponding to the models are in table below.…
If you have problem with stuff falling out or catching when closing a drawer this is for you. This model is for the MEDIUM drawer (5cm between the drawer and the "bar"). For 37cm depth of drawers you need print both A and B and they…
![IKEA MAXIMERA Add-on side for MEDIUM drawer [updated]](https://media.printables.com/media/prints/7e9e2aa4-2e7c-4875-af6e-adbf843baed0/images/12227993_b7eb9a6d-8f2b-4945-b8f9-81325caeafbb_01309e75-10ea-454c-8b60-4eb522cd89b0/vid_20260304_212036018.gif)
