399 modeli
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+
Wir haben ein offensichtlich altes Modell der Emcur Nasendusche (für Emser Nasenspülungssalz). Die mitgelieferte selbstklebende Halterung war bei uns nicht anzubringen. Also bestand Bedarf, einen Ständer zum Befüllen und Trocknen zu…
An ESP8266/NodeMCU enclosure incl a JST connector for a LED strip, a barrel connector for DC power and 4 dupont connectors. Used this for the other part of the dupont connector:…
A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…
Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…
Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…
Fusion 360 source file available! UPDATE 27.03.19: Remodeled designs from scratch in Fusion 360 and added slots to fit full size dupont connectors as follows: V2 - similar to the original but with duponts V2_Hollow - hollow bottom, more…
This case allows you to put the dupont wires inside the case rather than outside (in case you have a cat that likes to knock your stuff around). It provides a bit more security to keep things from being disconnected.
Needed a case and didn't find one I liked so I designed my own. I wanted something very minimal with thinner walls to reduce print time and material used. There is a port on the bottom of the case for wires to feed through as well as a…
3 part model of Mjolnir as depicted in the MCU Thor/Avengers films
just a stretched version fitting ESP8266 nodeMCU v3 from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/samwiseg0/esp8266_nodemcu_din_mount by samwiseg0
Hello friends this is a simple case the Node MCU (ESP 8266). Route the cables through the case bottom before you solder them to the Node MCU. Support is needed for the Case Bottom. Print Settings Printer Brand: Creality Printer: Ender 3…
I liked the case plasmata designed, but needed more space beneath for easier pin access. This version provides more space and an unnecessary vent on the lid. ***UPDATE: Added a base version with two holes for wire access.
My first take on building my own sensor for presence detection in our rooms. All cases I tried either didn't fit the board or weren't able to house the sensors. So I designed one myself. It fits the AZDelivery ESP32 NodeMCU…
UPDATE 02 April 2023 I have added the STEP and f3d files of those who want to edit the design. This is the fan bracket that is slotted over the heatsink of the X1. I designed this as those I saw were restrictive ducts that create back…
Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…
This is my rendition of a case with lid for the ESP32 S2 NodeMCU board to house the DHT11 temperature and humidity sensor. This model also have the Home Assistant logo embedded on the side. This simple design ensures a tight fit for the…
There are 3 parts to this. The top, bottom and an accent colour board (for some extra fun). The design doesn't serve too much of a practical purpose (the hexagons look cool) but, the pins are recessed into the case to prevent them from…
A remix scaled up a bit to fit an ESP32 nodemcu Category: Electronics
ESP8266 node MCU V3 Case from AZ-Delivery
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
The existing 30mm fan for cooling the Raspberry Pi, BTT pico board and stepper drivers may not be sufficient if users want to fully enclose the V0.2 for ABS, ASA or Nylon with a hot chamber. I design a back panel to install a silent…
I wasn't entirely happy with other models, so I created my own. minimal size to protect all header pins cutouts for USB port, the 2 buttons and Dupont connectors You just need 2x countersunk M3 screws or friction fit the top (for this you…
This is a case for the NodeMCU ESP-32S development board by Ai-Thinker that can be mounted on an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure and easy installation. Note: This was made for the Micro USB version of the board and…
The purpose of this project is to create an inexpensive audio player for home assistant that can be plugged into an existing stereo speaker system. With this system, you can also build a simple mono amplified speaker that can be used as a…
Changes made: - removal of redundant paths, - repairing the model -removal of a wall, improving cable routing
Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…
This is my rendition of a case with lid for the ESP32 Devkit V1 NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32 Devkit V1 board, and also a squeezed fit for the DHT11…
This is a housing for a NoceMCU v3 and an HC-SR04 ultrasonic distance sensor. The lid will stay on when held upside down, but it's easy to remove. I designed this together with my son as an introduction to 3D modeling. Print Settings…
Rafts: No Supports: Yes Infill: 20%
This is a case for holding a NodeMCU v3 and 4x 7-segment MAX7219 8x8 led matrix. NOTE : The holes for the NodeMCU board are not properly aligned. The board fits but screws are a little angled. Will fix soon. Category: Electronics
I'm making a project that uses these 8x8 RGB LED matricies and I needed a reference model. I couldn't find one so I knocked this one up in OpenScad. Seeing as I couldn't find one here, I figured I'd upload it so anyone can use it as a…
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board. Prints without support. NRF24L01+ module stay in place once antenna has been screwed on. I used a bit of blu-tack to keep the ESP32 in…
Hi guys, this is a simple case for the Wemos D1 Mini (NodeMCU ESP8266) . Route the cables through the case bottom before you solder them to the Wemos D1 Mini. Easily resized and customized in Fusion360 with the provided .f3d file.…
a simple ESP8266 case Designed for use with WLED firmware Assembly instruction Print the case Solder power and data pin to the NodeMCU pull the cable through the hole in the back put the MCU board into the bottom part of the case put the…
Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.
Display box for 4xMAX7219 (Multi filamente + Single filament version) You can use PLA, PETG or others but of a light color (recommended white) , since the screen has 0.8mm of plastic in front that is used as a diffuser. MMU version…
This is a case for the NodeMCU V3 - ESP8266 (e.g. for AZ-Delivery ESP8266 NodeMCU Lolin V3 ) esp8266_case_box v5 : added two holes to mount box with screws on a plate (e.g. with 2xM2). I hope you like the model! → Makes and Comments are…
A case for housing a NodeMCU (ESP8266) board with enough room for cable management. I added holes on both sides to get your sensor cables out of the case, if needed. The case is also high enough to house all of your cable mess. Walls are…
The lid snaps in, just screws for mounting the electronics required
This is my remix of the Sensor Node Enclosure for ESP8266 by calvinboey on Thingiverse . I changed it in order to fit an ESP8266 and a BMP180, so I made it smaller and closed nearly all openings. Other sensors should also fit in the box,…
Enclosure for a NodeMCU ESP8266 board. Allows space for connections onto the male header, with a small cable exit. Also allows access to the USB port. Use two short M2.5 countersunk screws to hold the lid in place. This also clamps the…
This is my rendition of a case with lid for the ESP32S NodeMCU board to house the DHT11 temperature and humidity sensor. This simple design ensures a tight fit for the ESP32S board, and also a squeezed fit for the DHT11 sensor. Also,…
This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it
Case for an ESP8266 NodeMCU with micro-usb connector. Press-fits together. If it is too lose, apply a drop of glue.
Just wanted a quieter printer, when it is idle. The Pi gets hot on it's own and needs some cooling, so I designed this back for a larger fan. You can connect it directly in place of the old one. BOM: The fan is 8010, mounted with 4…
I've designed this case for the NodeMCU V3.2 Arduino ESP8266 (Lolin/Wemos), with a bit of space for a sensor. Print Settings Rafts: Doesn't Matter Supports: No Category: Electronics
Warning: You won't be able to access the Micro USB port with this enclosure! I modified this housing to be quite a bit slimmer, but it still has enough space for a level shifter and a 24V to 5V step down module. That's why the opening for…
My motherboard fan sounded like a motocross bike so time to replace. This holder hangs on to the poop chute with double sided tape. No need to remove heatsink, or even remove the old fan if you don't want to. Use the connectors that come…
This is the remix of atomic fan holder from Filip Luchianenco. I reduced weight and added possibility to attach toolhead mcu 3010 fan. Additionally, I created from scratch mcu fan cover. Printed with ABS, 0.2 layer height. BOM: YOUNUON…
This box is made for the BTT sk2 and the PI 3 A proposed by Rat Rig in the full kit. You can reuse the 4010 fan and the Cable passthrough part. to assemble you need brass inserts for 3mm screws. Also to have a more compact machine I use…
This is a tiny box to hold a wide NodeMCU board. The box is tall enough that you can cram a few select parts underneath the board. There's a cutout for the (ugh) micro-USB port, and a hole to stick a 3mm LED out, or run some wires…
A simple model to cover the controller on a Corne keyboard. I use the Corne HiPro Case by mburrows for my Corne keyboards. I don’t have an OLED though so I’ve been using the MCU cover from the Corne Choc Low Profile Case . Problem is that…
I was fiddling around with fully printable hinges and created this design for a project. There is a small gap of 0.2mm between the top and bottom parts. After printing you may need to carefully crack possible connections between both…
Remix of the Case from don frechdachs for Wemos D1 Mini (NodeMCU ESP8266) . I've added a cutout for the USB port. Compatible with the Wemos D1 Mini as seen here:…
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…
Halterung für den Lüfter auf dem Kühlkörper vom P1P. Lüfter kann über den Gcode angesteuert werden, mehr dazu im BambuLab Forum , ich bin das Problem umgangen, indem ich die Kabel abgeklemmt habe, die für die Steuerung zuständig sind.…
Remixed techniczny's case to fit with my specific nodemcu and relay module nodemcu used: AZDelivery NodeMCU Lua Amica Modul V2 ESP8266 ESP-12F relay used: AZDelivery 2-relay module 5V with optocoupler low-level-trigger 3 versions uploaded…
Case for a PIR sensor large enough to contain a nodemcu
Modified for esp8266(with no letters) NodeMCU PCB size is about 58mm X 31.1mm It fits quite tight. A bit hard to remove from the case.
Simple, well fitted enclosure for NodeMCU. Designed to fit Voron DIN rail clip. https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl To assembly you need 4xm3x16mm screws, 4xm3 nuts, 2xm2x10mm self…
MAKE YOUR SV06 QUIETER: This modification allows for fan control of both the MCU Fan and Hotend Heatsink Fan on the Sovol SV06. I have not yet tested it on the SV06 Plus, but it should work the same. KLIPPER IS REQUIRED. It may be…
ESP-32 Dev Kit C NodeMCU - Cover for WiFi Repeater . Filament eSun PLA+ Black
This is my attempt at creating an enclosed box for the ESP Development Board 8266 for my LED projects. I wanted to house the board its self along with wago connectors that I have all in one place looking neat and tidy. Wagos are great,…
I couldn't find a 3d printable cover for the lily58's MCU. Which is … weird. But here's one now. IMPORTANT: The cover is not symmetrical. The hole placement on the board itself is strange and a symmetrical plate interferes with the…
Simple Model of the ESP-32 NodeMCU Developmentboard by AZ-Delivery. Can be used to get Placement of the USB-Port right.
This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display. The backplate is supplied in three differnt versions: With hole for a DHT22 Temperature/Humidity Sensor With mounting points for Adafruit Breakout…
Simple case for an ESP8266 or ESP32 board (in my case NodeMCU), a temperature sensor DHT11 or DHT22 and a small SSD1306 oled screen. Works great as a small Duino-Coin IoT setup. Designed with Tinkercad. Parts need to be glued together…
A case design for NodeMcu V2, Amica This Design is base on the design from Crashoverride, published Jan 30, 2016 https://www.thingiverse.com/thing:1305796 Category: DIY
These are the enclosures I designed for the DIY-Sensor for a Ferraris wheel power counter with an Amica NodeMCU ESP8266. You can read details on the setup and build and get the software at…
mcu board used mainly in building custom keyboards. USB port and pin locations are accurate, the resistor, chip and diodes are for cosmetic purposes only.
imported from thingiverse. remix: https://www.thingiverse.com/thing:4515152 Enclosure for a NodeMCU v3 board with space for a connector to a strip of addressable LEDs. Powered via an external 5V USB power supply. Suitable for powering LED…
Remix of the lower rear panel with 80mm fan mount, but mounted on the opposite side from the filament spool. You can mount either 8010 or 8015 fans since it won't get in the way of the spool. For my build I used a 8015 Delta electronics…
First off all you need a angled USB-C cable for the pi. (see picture) and 3mm heatset inserts, all parts are put together with Screws
I made this case to house nodemcu with esp3d installed for my delta. There are two variants - w_2020_mount is intended to be mounted on 2020 profile. Screws needed are M2x6 Category: 3D Printer Accessories
Created an enclosure for the slightly larger NodeMCU, specifically this one: https://www.aliexpress.com/item/5PCS-V3-CH340-Wireless-module-NodeMcu-Lua-WIFI-Internet-of-Things-development-board-based-ESP8266-esp/32794607540.html My NodeMCU…
ESP8266 node MCU V3 Case
V2 - 04/11/21 I haven't printed this new version yet. Updates are: Added slit in the screw poles in the main body to add a nut, so it keeps the lid and body together much tighter without straining the plastic too much. Made walls slightly…
just added 15 mm of height
This is a replacement shield for the MCU box of the Sovol SV06 ACE and SV06 Plus ACE printers. (This model is essentially a companion build to the PSU shield .) While the MCU box is not the worst offender in terms of acoustics (that honor…
Simple and small NodeMCU(ESP8266) and DHT22 case. 4x bolt m3x12mm The DHT22 is very close to the ESP. Create a code to put the ESP in “Sleep”. Then it will work fine!
Case designed to fit both the MCU and a Raspberry Pi, along with a 80mm Fan. The front part has the holes for the 4* M5x12 fan screws and on the sides 4* M3x6 . As for the Back part, pick it accordingly to your Raspberry Pi version, and…
There are lots of project boxes out there. I needed a specific design that requires no screws. I hope you enjoy my little endeavor. It was a lot of fun to design and every time I design something I learn some new ideas on better design!…
A slim case for the ESP8266 NodeMcu V3 CH340 micro-USB micro controller boards I picked up on AliExpress NodeMcu-CH340-V3 . The style of this case is inspired by the Raspberry Pi Pico snap-together case by @glabifrons Designed for 0.2mm…
Jednoduchá krabička pro Node MCU ESP8266 s otvorem pro napájecí kabel a otvorem pro kabel od čidla
Made this enclosure for quick prototyping for CH340 Chip NodeMCUs. It has kinda snap to fit function but do not rely on that :) Hope it does help. Also attached step file so feel free to modify. Material eSun PLA+ Black Hotend Temp 215…
This is a MCU Board mounting bracket for Octopus and Manta M8P that holds 4 BTT TMC5160T Pro drivers for AWD Mods/VZbot. BOM: 20X M3*4*5 Heat set inserts 20X M3*8 SHCS (If using the fan cases in the picture then 16X M3*10 and 4X M3*8) Two…
Qidi Q2 puts its AP (Host MCU) Board on the left side panel in the chamber. This leads to the chances of the system crash(unexpected shutdown) due to the high temperature of the chamber. General speaking, comsumer grade MCUs have -40°C ~…
This is a case for an ESP8266 NodeMCU v3 from LoLin. This Case uses no screws. Everything fints in because of friction fit. It is made for Spacehuhn's espdeauther. All credits belongs to Spacehuhn!…
I've recently upgraded to an SKR Mini E3 V3 board and had an ESP8266 lying aound, so I decided to set up ESP3D and put it in a box attached to the middle extrusion. Features: Dupont connectors are accessible, but not exposed. The top is…
Simple 120mm fan cover grill with snap-in removable Venturi. More Venturi design to come :)
This is a bin für D1 Mini NodeMCU V3 which fits into the gridfinity system and is also stackable with other bins.
This is a remix of Finch's "parametic rounded sliding top box v1.1" from Thingiverse It fits a NodeMCU and a PIR looking "frontwards". Inside there are stands for the NodeMCU. The PIR is a close fit: you have to unmount the "lens" part…
Piccolo supporto compatto e stabile per BMCU370 LITE (ams lite clone), messo al posto del porta bobina. Ho sfruttano le viti originali per fissare il piccolo aggancio sull'asse z mentre per fissare il pezzo grande all'BMCU ho usato 3…
A case/cover/shell for NodeMCU (ESP-12E) For V2 CP2102
GrabCAD(Get The STP File): https://grabcad.com/library/esp8266-nodemcu-lua-case-1 Print Settings Printer: Ender 3 V2 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Category: Gadgets
Every time I build a little electronics project, I hate how the components usually just rattle around in the case. So I designed this customizeable solution in OpenSCAD that lets me configure the number of pins, the sizing and spacing,…
![[UPDATE] Bambu Lab P1P MCU heatsink fan bracket](https://media.printables.com/media/prints/504764/images/4251291_083caa47-8665-4d5b-9562-5041119008ea/lufterhalterung_hauptplantiene_v3_mit_mutter_baugruppe_vlo.png)
