P
PrintablesMilan Stehlík
maono AME2 riser
Tištěno z PLA, výplň 10%, bez podpěr.
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
Wyniki wyszukiwania: me2
89 modeli
P
Printablesdodasch
BME280 Sensor Case
BMP280 / BME280 Sensor Case with strain relief for 2-8mm diameter Cables You need 2x M3x10 DIN912 Screws This is a composite Part, click on “Split to Parts” in PrusaSlicer and right click on the intended elements. Add the following Part…
- Pobrania
- 696
- Polubienia
- 51
- Ocena
- 5
P
PrintablesGanjew420
Bme280 housing
Uses m2.5 screw to secure the sensor in the housing…but its not needed, as the jumper wires hold rather snug. in the pictures, im not using a screw. made using freecad
- Pobrania
- 564
- Polubienia
- 50
- Ocena
- 5
P
Printablesabasson
PMS5003 / DHT22 (or BME280) / ESP32S Air Quality Sensor case
This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…
- Pobrania
- 505
- Polubienia
- 49
- Ocena
- 0
P
PrintablesTri-D
BME280 SHT31 SHT30 SHT3x housing with strain relief
Liked the original and modified it a little
- Pobrania
- 473
- Polubienia
- 39
- Ocena
- 5
P
PrintablesLuckyJaS
BME280 & SHT20 holder
Holder for sensor GY-BME280 3.3V (humidity, temperature, barometric pressure). BME280 Link to my models 0,15 mm layer. Sensor mounting: Allen screw M3x6 or 8 Fixing the top cover (but not needed, the cover holds on its own): Allen screw…
- Pobrania
- 313
- Polubienia
- 37
- Ocena
- 5
P
PrintablesMichael
BME280 Enclosure
This is a small enclosure for a BME280 temperature and humidity sensor. Print instructions Printer: Prusa Mini Supports: not needed Layer height: 0.2 mm Infill: 15% Filament: Prusament Vanilla White
- Pobrania
- 261
- Polubienia
- 15
- Ocena
- 4,67
P
PrintablesfbeauKmi
BME280 extrusion mount for Voron 2.4 and Voron 0
BME280 is a temperature sensor, it also gives humidity and pressure. I use it as chamber temperature sensor in my Voron 2.4. There is several form factor, be careful to have the one on picture to use this mount ( eg.…
- Pobrania
- 261
- Polubienia
- 81
- Ocena
- 0
P
PrintablesBig Dog Custom Creations
Compact Case for use with the WEMOS D1 Mini and a BME280 Temp and Humidity Sensor.
Compact Case for use with the D1 Mini and a BME280 Temperature, Humidity, and Pressure Sensor. I designed this and use it for reading temperature and humidity in various locations around the house. I use that information for Home…
- Pobrania
- 250
- Polubienia
- 27
- Ocena
- 5
P
Printablesxshadows
ESP8266 + BME280 enclosure
Design a simple enclosure for my ESP8266 + BME280 temperature, humidity and pressure sensor with micro USB space for pow
- Pobrania
- 215
- Polubienia
- 23
- Ocena
- 0
P
Printableshygy
nomadBox - heltec WiFi LoRa 32(V3) case, GPS, BME280, buzzer, rotary encoder
Case for Heltec WiFi LoRa 32 V3 This case is designed for the Heltec WiFi LoRa 32 V3 and includes the following components: Included Components: GPS Module (NEO-6M or GT-U7) On/Off Switch (S3P = SRS3P, 19.4 x 5.6 x 5mm) → Link GY-BME280…
- Pobrania
- 195
- Polubienia
- 35
- Ocena
- 5
P
PrintablesLuis
ESP8622+BMP/BME280 BOX
This is a box for ESP8266 30pin+BME280 temp, humidity and pressure sensor. Easy to assembly, just slize in the lid.
- Pobrania
- 166
- Polubienia
- 14
- Ocena
- 0
P
Printablesmariusbach
(old v1) ESP32 + BME280 weather station with stevenson screen
Version 2 is available now! Outdoor Weather Station based on ESP32 and BME 280 Little outdoor weather station with ESP32 (NodeMCU and similars) box which can be mounted to a rail or similar (clamp diameter 22mm). It has an arm to hold the…
- Pobrania
- 165
- Polubienia
- 27
- Ocena
- 0
P
Printableszefer
ESP32 D1 Mini BME280 IoT sensor case
This is a small case that snugly fits an AZ-Delivery ESP32 D1 Mini board. The lid is designed to mount an external BME280 or BMP280 sensor board, although this is optional. It has been designed and printed as part of this project:…
- Pobrania
- 163
- Polubienia
- 10
- Ocena
- 0
P
Printablesrallef80
Case for Wemos D1 Mini and BME280
Compact case for Wemos D1 mini and BME280 sensor with an entry hole for a cable entry grommet. Many thanks to the creator of the original model: Big Dog Custom Creations . In addition to the .stl files, step files have also been added for…
- Pobrania
- 161
- Polubienia
- 22
- Ocena
- 5
P
Printablesallmysparetime
Sensirion SPS30 / Adafruit BME280 Weatherproof Outdoor Enclosure
This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…
- Pobrania
- 161
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRGI
Housing for BME280 / SHT3X sensor - with magnetic base & hook
Housing for a BME/BMP280 sensor (5V edition) or a SHT3X sensor. Can be screwed down with a M3x6 screw.The base can hold a 8x3mm magnet. Print instructions Category: 3D Printing Summary Housing for a BME/BMP280 sensor (5V edition) or a…
- Pobrania
- 158
- Polubienia
- 16
- Ocena
- 5
P
PrintablesMoxL
Octoprint monitor weather station esp8266 D1 mini ssd1306 bme280 case
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
- Pobrania
- 156
- Polubienia
- 24
- Ocena
- 4
P
PrintablesJeremy Laurenson
BME280 HiLetgo 3.3V Atmospheric Pressure Sensor Cover
Created using Fusion 360
- Pobrania
- 152
- Polubienia
- 10
- Ocena
- 4,5
P
PrintablesVolker
ESP32 Weather Station (BME280, SPS30)
Remixed the housing from JT https://www.thingiverse.com/thing:2820147 in order to support: ESP32 Feather Huzzah with 2.4" TFT Wing Bosch BME280 sensor Sensirion SPS30 sensor Source code can be found here:…
- Pobrania
- 138
- Polubienia
- 61
- Ocena
- 0
P
PrintablesZdendys
BME280 BMP180 Si7021 sensor cover
Cover for BME280/BMP180/Si7021 sensors, with labels of pinout Category: Electronics
- Pobrania
- 137
- Polubienia
- 4
- Ocena
- 5
P
PrintablesStanley
BME280 + BMP180 outdoor cover
Small cover for BME280 and BMP180. For outside use, PETG/ABS/ASA is preferred. Recommended settings: 4 perimeters 0% infill
- Pobrania
- 135
- Polubienia
- 5
- Ocena
- 0
P
Printablescartyski
OPENSESAME2000 - Jar Tool
Ideal for smaller jars or bottles, these compact versions offer the same convenience and ease of use. While PETG or TPU are recommended for optimal performance, PLA can also be used. This is my favorite and recommended version of the tool…
- Pobrania
- 134
- Polubienia
- 30
- Ocena
- 5
P
PrintablesFozi
LACK BME280 sensor mount for Ender 3
This is another sensor mount for my Ender 3. See here for my previous one: https://www.thingiverse.com/thing:4597337 I made another one, because i was not satisfied with the laginess of the AM2302/DHT22 on the RaspberryPi. This mount…
- Pobrania
- 127
- Polubienia
- 19
- Ocena
- 0
P
Printables3DPrintDemon
BMP280 BME280 V Slot Sensor Housing
…Please be sure to hit like & post a make, I'd love to see your prints! Install your BMP/BME280 sensor on any V-slot. Or use base with no mount for glue on application. Measure temperature, pressure & humidity on your Rpi. You'll need: 1x…
- Pobrania
- 124
- Polubienia
- 17
- Ocena
- 0
P
Printableswhitespring
Lav Concealer for Sennheiser ME2
This is a concealer to use with a bit of wire and a for / moleskin to attach your Sennheiser ME2 (the old one with detachable windshield) to a shirt etc. Similar to bubblebee. I printed on MK4s with FLEX in 0.15 LH, Nozzle 0.4, 15% fill,…
- Pobrania
- 121
- Polubienia
- 6
- Ocena
- 0
P
Printablesmariusbach
ESP32 Box and lid + vented + outdoor version, for BME280
Box and lid for ESP32 modules (NodeMCU boards and similars). The BME280 version offers a mount point for the sensor below the main board. Also, the box then has vents. However, testing revealed that the board gets so warm that the sensor…
- Pobrania
- 118
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPHabermehl
fischertechnik BME280 I2C temperature sensor case
Ein fischertechnik-Gehäuse für das abgebildete Sensor-Board mit Bosch BME280 Temperatur/Druck/Luftfeuchtigkeitssensor. Montage durch Snap-in-Deckel, der auch die Platine in Position hält. Keine Schrauben. 4-adriges Flachbandkabel, direkt…
- Pobrania
- 112
- Polubienia
- 7
- Ocena
- 0
P
Printablespltaylor3
JBL Extreme2 Wall Mount
Wanted to get my speaker off my workbench, so designed up a holder to wall mount it. Has a pass through hole in the base to allow for the charging cable to still be plugged in.
- Pobrania
- 83
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMechatr0nik0r
Waveshare BME280 Holder
A simple Holder for the Waveshare BME280 Sensor. The hole is for an M3 screw. I used it to mount the sensor in an Voron V0.1 as chamber temperature sensor. For reference this is the bm280 i used: https://amzn.eu/6RERB8z V2 is a simpler to…
- Pobrania
- 79
- Polubienia
- 3
- Ocena
- 0
P
Printablessfa
BME280 Case
A tiny case to slide in the BME280 sensor. Designed to be friction-fit and used with soldered pins. Print it standing upright.
- Pobrania
- 75
- Polubienia
- 11
- Ocena
- 5
P
PrintablesM
ESP8266 + BME280 Enclosure w/ Quick Slide Mount/Base
ESP8266 + BME280 enclosure with quick-slide mounting base and printable board lock for a tool free installation (not including a screw or two for the enclosure mount). I flipped the ESP8266 board inside the enclosure so the chips were…
- Pobrania
- 74
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLWC
Meshtastic DIDDY "ULTRA" GPS + BME280 upgrade kit REMIX
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
- Pobrania
- 72
- Polubienia
- 23
- Ocena
- 0
P
PrintablesKavaEGY
Temperature and Humidity Sensor - Powered by ESP32-C3 Mini and BME280
Temperature and Humidity Sensor Release v2.0 Project Features This project is a compact temperature and humidity monitor built with an ESP32-C3, a BME280 sensor, and a 1.3-inch SH1106 OLED display. It's designed for simplicity, low power…
- Pobrania
- 70
- Polubienia
- 12
- Ocena
- 0
P
Printablespansono
ESP8266 Multi Sensor BME280 (battery powerd) - T, Humidity and hPa, incl. Code
I started my Home Assistant instalation a few day ago and now added these sensors to it (will make a window reed contact next on the same base). The ESP ist running on the ESPhome software (you can find a good guide in how to wire up the…
- Pobrania
- 66
- Polubienia
- 14
- Ocena
- 0
P
Printablesabasson
ESP32 Dev (USB-C) with BME280 Sensor Enclosure
This enclosure is an original, custom-designed case for the ESP32 Dev MCU board (USB-C), with space in the lid to securely house a BME280 sensor for temperature, humidity, and pressure measurements. The design ensures the ESP32 board is…
- Pobrania
- 65
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCynic Route
BME280 Breakout Module Model
This is a simple dimensional model of the common BME280 breakout board. Accurate enough for modelling - not to spec.
- Pobrania
- 64
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRCFD
Home Assistant weather sensor (S2-MINI + BME280)
-ESP32 S2 mini -BME280: Cheap, small and accurate enough sensor for pressure, humidity, and temperature sensing -Small wood screw (OD: 4mm, Length: ~8mm)
- Pobrania
- 57
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRene De91
BME280 mount for 2020 extrusion
Simple mount for a BME 280 temperature/humidity sensor to a 2020 extrusion. Used it to mount the sensor to the gantry of my Voron 2.4. Check the photo if your sensor has the same PCB. You need 3 M3 screws and 1 M3 T-Nut.
- Pobrania
- 55
- Polubienia
- 13
- Ocena
- 5
P
Printablesn00b0ss
wemos d1 mini bme280 housing
housing for wemos d1 mini with space for male pinheader and bme280 top part no support needed simply print top and bottom separately
- Pobrania
- 50
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBilld
Temperature & Humidity Monitor with BME280, Wemos D1R2 ESP8266 and LCD1604
Temperature and Humidity Monitor for my Prusa Mini+ enclosure, although it is standalone device (requires USB input for power) so can be used anywhere you want to monitor temperature, humidity and barometric air pressure. A small,…
- Pobrania
- 49
- Polubienia
- 7
- Ocena
- 0
P
Printablesnmattia
Heltec Wifi LoRa 32 Cases (v3/v4) with environmental sensor (BME280)
This is a collection of cases for the Heltec WiFi LoRa 32 v3/v4 boards. It holds the board, a battery, and optionally an environmental sensor. The button (PRG) can be pressed and the reset button (RST) is accessible via a pinhole (use a…
- Pobrania
- 48
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDigitalUrban
TIME2: A 3D-printed weight-driven clock with key winding and an hourly bell
TIME2 is the next version of TIME , my open-source 3D-printed clock. It keeps everything that made TIME work: the deadbeat escapement with its one-second tick, the 60:1 going train, the weight drive and the bolted six-click ratchet. The…
- Pobrania
- 46
- Polubienia
- 31
- Ocena
- 0
P
PrintablesRobertHirschbeck
sensor housing for BME280 and IMU-9225
This is a sensor housing for indoor use. The outside dimensions are L x W x H: 90mm x 70mm x 43,5mm. The wall thickness is 5 mm. You need: 4 M3 thread-inserts to complete this build. 4 M3 x 12 (or less) ISO 4762
- Pobrania
- 45
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNeroHes
BME280 Mount for 2020 extrusion
I needed a simple mount for a BME280 breakout board on a 2020 extrusion. BOM: -) 2020 T-Nut -) M3x8 or M3x10
- Pobrania
- 45
- Polubienia
- 5
- Ocena
- 5
P
PrintablesGilfalas Orcbane
Mooer Prime2 Belt Carry Case
The case is not a snug fit on purpose. There's a 1mm gap on the width and thickness. This way you can pad the inside of the case with some thin foam or similar material to avoid scratching the Prime2 and keep it securely in place. The…
- Pobrania
- 45
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJan Pichrt
Ikea Lack C270 + BME280 mount for Prusa enclosure
You can mount your Logitech C270 and BME280 sensor together!
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMawoka
BME280 Holder for IKEA VINDRIKTNING
This model helps you mount a BME280 to the backside of an Ikea VINDRIKTNING . This model requires support and I'd recommend printing it with the big pillars facing downwards. But be careful when removing the supports!
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
Printablesbillyd
Dynam ME262 Cockpit Frame with FPV Pan and Tilt mount
This is a cockpit frame I developed for Dynam's ME262 twin 70mm edf jet. I wanted an FPV experience to simulate sitting in the cockpit. But the canopy that comes with the kit is just painted clear plastic and trying to look through that…
- Pobrania
- 40
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLaChriz
D1 Mini Bme280-sensor sphere
This is a small enclosure for a D1 mini+batteryshield+bme280 sensor for homeautomation. Used components: D1 Mini NodeMcu mit ESP8266-12F WLAN Module für Arduino Batterie Shield für Lithium Batterien für D1 Mini GY-BME280 Barometrischer…
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEddi Maevski
Presence sensor ESP8266, LD2410C, BME280 and WS2812 Status Led
Presence sensor for use in Home Automation Parts used: ESP12E (ESP8266) with breakout board, 26x38mm HLK2410c 24G radar sensor, 22x16mm. BME280 Temp, pressure and humidity sensor, 15x12mm WS2812 LED, x4 pixels, 10x32mm. Notes: All parts…
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDSG
BME280 Stevenson Screen
Made by cybershifter (thingiverse): Necessity is the mother of invention, so I made a thing. This Stevenson screen is designed to shroud a BME280 sensor mounted to a breakout board, to shield it against the elements in a controlled…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJASIT
Bme280 housing
house for a bme280 sensor uses m2.5 screw to hold sensor in place, but it is not needed..as the jumper plugs hold strong
- Pobrania
- 35
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDSG
BME280 Stevenson Screen (holder inclusive)
Danke an @Zdenis und @cybershifter (Thingiverse). Thanks to @Zdenis and @cybershifter (Thingiverse). This is my first work with thinkercad. Sorry for maybe small issues.
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRoman S.
BME280 mount for Radiation Shield
BMP085 mount for "Radiation Shield For Weather Station Temperature/Humidity" by micromet. For the rest of the radiation shield follow this link: https://www.thingiverse.com/thing:1067700 Print Settings Rafts: No Supports: No Resolution:…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
Printablessudodrew
Maono AME2 vertical mount
My dad needed a bracket to mount his audio interface to the back a speaker for transport. Fits the Maono AME2 perfectly. Dimensions of the AME2 is L24.5*W15.7*H5.5CM(button included). If it fits any others, please leave a comment for…
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
Printableswdiaz
Case for the Waveshare BME280 sensor
Case designed for the Waveshare BME280 breakout board. Keeps your sensor protected while allowing airflow for environmental readings. It was designed to be mounted on 2020 extrusions. BOM: 2× M2×4mm screws (sensor board mounting) 1×…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 5
P
PrintablesPepkilz
NodeMCU + BME280 Case
This case requires two pieces of hardware. One is the NodeMCU with built-in display that I used here. The other is the BME280 sensor that can be picked up from here. 3x m2x8 screws and inserts for putting together. I have also attached…
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
Printablesיותם חיים
BME280 ESP8266 Battery case
Close case for BME280 wifi station base on battery (no cable) more safe in high humidity area.
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHelmchen
(Wemos) D1 Mini + BME280 Temp Humidity Sensor Case
A simple case for a (Wemos) D1 Mini + BME280/BMP280 + Battery Holder / Battery Pack. There is a cutout for a rocker switch which is highly recommended (when using batteries) as you dont want the batteries connected when using the usb port…
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWarialinth
40mm fan cover + BME280 mount
Mesh used is 0.2mm thick PET plastic mesh harvested from reusable Billa fruit bags. Flange for the fan is sort of delicate and supports can be hard to remove from there.
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRene
BME280 Chain mount
Simple solution to get a place for the BME280 temperature humidity sensor. You need: Heat insert 3x5x4 Short M3 screw Zip tie
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printablesnioko
Perles Piccolo AEG KME2 Coffee Grinder Hopper Bohnenbehälter
Thread is modified M30 to fit the grinder. Post your build, and if you have other information about that little grinder.
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesToFe
MoleBox: barometric pressure, humidity, temperature - BME280
MoleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
- Pobrania
- 23
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTimid Possum
Jumper Plug Housing for Raspberry Pi and BME280 Temperature, Humidity, Barometric Pressure Weather Sensor
Friction-fit enclosures for jumper wires for connecting a Raspberry Pi to a BME280 weather sensor module.
- Pobrania
- 21
- Polubienia
- 6
- Ocena
- 0
P
Printablesgs100x
Messerschmitt Me262 + BF109 aircraft keychains
Aircraft tag; a keychain with details about the Me26 & BF109, including diagram overlay!
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 4
P
Printables7h3 0n3
BlueDot BME280+TSL2591 sensor case
Just a simple case with a snap-in lid for the BlueDot BME280+TSL2591 . I also added the blend-file if you want to modify it for your use case.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEugeneS
Case for Meshtastic board DIY v1.05 with BME680(BME280) and 1.3’’ screen by EugeneS
PCB there: https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22 Schematics there: https://github.com/NanoVHF/Meshtastic-DIY/blob/main/Schematics/E-Byte_E22/Mesh_Ebyte_E22-XXXM30S.pdf Button 6x6x9.3 Screw M2 for…
- Pobrania
- 17
- Polubienia
- 5
- Ocena
- 0
P
Printablesgiblitz
BME280 Temperature Humidity sensor mounts
BME280 Temperature/Humidity sensor mounts. The holes for attaching the sensor to the mount are intended to accept M3 heat set screw inserts. The holes for attaching the mount to something else or intended for M3 wood screws. There are…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printablesrhaen
BME280 Breakout Sensor Gehäuse 16mm Pole
I like using the Wemos D1 ESP8266 microcontroller together with ESPHome to integrate sensors into my Home Assistant setup. For this project, I wanted a way to attach a BME280 temperature and humidity sensor breakout board to a 16 mm tent…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAlwaysTinkering
Kit Card Tree platform for ME262 Schwalbe by Nakozen
This is a mounting platform and sign bracket for the ME262 Schwalbe kit card by Nakozen available at https://www.printables.com/prints/143202 These parts are designed to attach to a 3UDC pivot arm so that you can present this model…
- Pobrania
- 16
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKPr
Tuya water level mount (ME201W)
Držák pro Tuya měřič hladiny (Tuya, ME201WZ, ZigBee). Existující uchycení měřiče slouží zeshora na nádobu, tedy např. IBC nádrž. Ovšem pokud řešíte problém uchycení uvnitř nádrže, například zespod na strop, proto jsem připravil tyto…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printablesbeyond3dprints
Frame2_Av2_Vertical
Increased the length of the I/O Panel mount to use a vertical GPU mount instead. Holes added to accept mounting screws for the Vertical GPU holder. You cannot install the I/O Panel with this remix.
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMindstorms
ESP32-C3 and BME280 case
Case for ESP32 C3 with 0.42 inch OLED connected with BME280 temperature sensor.
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
PrintablesOllie Lewis
944 ME221 ECU Bracket
Remixed Bracket to suit the ME221 ECU in a 944
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJasper
Case for Electrocookie 1/4 Stripboard, ESP32/ESP8266 and BME280
I needed a small, compact box to hold a 1/4 Electrocookie Stripboard (my favourite) with an ESPHome controlled esp8266 and BME280. The box has two lugs to allow for fixing to a wall using screws. The sensor needed to remote from the…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHiltsu
ESP32-WROOM-32D + BME280 Sensor Enclosure (Screwless Design)
A compact, screwless enclosure for ESP32-WROOM-32D (A2 delivery) with integrated BME280 temperature, humidity and pressure sensor. Design highlights: Screwless assembly – the case slides together using integrated rails, making it easy to…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesThynix
iCare HOME2 Eye Pressure Monitor Probe Cap
Technically you're supposed to switch out the probe after each use, but $1 per usage at multiple times a day gets expensive! Apparently, practically speaking, you can use one for like a week. This fits over the end of the device and…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJensen63
ESP32 devkit v1 + BME280 + SSD1306 enclosure
Remixed to also fit an OLED screen and my temp sensor. It's a bit janky as I didn't have the .step but it works.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printables
Meshtastic DIDDY "ULTRA" GPS + BME280 upgrade kit REMIX
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
P
Printables
Messerschmitt Me262 + BF109 aircraft keychains
Aircraft tag; a keychain with details about the Me26 & BF109, including diagram overlay!
P
Printables
Case for the Waveshare BME280 sensor
Case designed for the Waveshare BME280 breakout board. Keeps your sensor protected while allowing airflow for environmental readings. It was designed to be mounted on 2020 extrusions. BOM: 2× M2×4mm screws (sensor board mounting) 1×…
P
Printables
Heltec Wifi LoRa 32 Cases (v3/v4) with environmental sensor (BME280)
This is a collection of cases for the Heltec WiFi LoRa 32 v3/v4 boards. It holds the board, a battery, and optionally an environmental sensor. The button (PRG) can be pressed and the reset button (RST) is accessible via a pinhole (use a…
