Wyniki wyszukiwania: microwave

Sortowanie

219 modeli

P
PrintablesjonnieZG

Microwave Oven Turntable Coupler

Use PA (nylon), PC or some other temperature-resistant filament. Do not use PLA, or carbon-infused filament, as it is likely to heat up because of its conductivity. Printed at 0.20m QUALITY settings with 40% infill.

Pobrania
676
Polubienia
46
Ocena
5
P
Printablesandrewjfreyer

Interlock Release Button for Built-in KitchenAid Microwave

Replacement interlock button for KitchenAid button KCMC1575BSS1 with sturdier construction.

Pobrania
351
Polubienia
15
Ocena
5
P

Dollhouse Microwave

My daughter kept saying her dollhouse was missing a microwave and a 3D Printer. Well, here is her microwave complete with buttons. Door does not open. I got lazy and she said she didn't mind if the door is fixed. As a result the inside is…

Pobrania
336
Polubienia
80
Ocena
3
P
PrintablesMike Anderson

Microwave Popcorn Holder

I couldn't find a microwave popcorn box that would use a FIFO storage method and be able to see how many bags were left in it. This will hold 9 bags of popcorn. 20% infill Some supports are needed. Printed with Numaker PLA+

Pobrania
327
Polubienia
87
Ocena
5
P
Printablesl8nite

LG Microwave Button Bracket

The door button on my LG microwave stopped working, because it is designed to connect to some very weak plastic tabs that act as a hinge. In my case, the plastic tabs broke off, and the button no longer worked reliably. I designed this…

Pobrania
260
Polubienia
15
Ocena
5
P
Printablescq

Microwave Roller Ring Replacement

The wheel off my microwave roller wheel broke off, create a new one and improved with more wheels so it is more stable. Diameter of 19.5cm. Originally design for Sharp R-210D(W) Simple to print, I used CPE to print at 0.3 layer height.…

Pobrania
236
Polubienia
27
Ocena
4,67
P
PrintablesPapek

Microwave Door Latch

Door latch for microwave oven BEKO MGB 25333 BG. The original door latch tab broke and microwave stopped working. The service center offered only a complete door as a replacement, for which they asked €90, which I kindly refused. 3D…

Pobrania
228
Polubienia
10
Ocena
0
P
Printablescloser

GE Microwave Handle

Microwave door handle has been broken forever. Finally broke the rest of the way . So, modeled and printed a replacement. This one is significantly more stout than the original, so maybe it will endure my kids abuse. Printed in PLA, on…

Pobrania
212
Polubienia
13
Ocena
5
P
Printablesgid

Microwave Oven turntable spindle/coupler

A classic use-case of 3D printing… a flimsy replacement injection-molded ABS part costs a fortune to source and is discontinued by the manufacturer. This is the part that links the glass plate in a microwave oven to the driving motor…

Pobrania
179
Polubienia
12
Ocena
0
P
PrintablesDombi3D

Microwave Knob

This knob is a replacement part for the Whirlpool MD111 Microwave. It has two parts that you should glue together with superglue when you set up the correct angle for the 0 position. Print instructions Category: Replacement Parts Print…

Pobrania
164
Polubienia
19
Ocena
5
P
PrintablesWonder3d

Microwave

model of microwave

Pobrania
156
Polubienia
10
Ocena
0
P
Printablesvintagepc

Wire Shelf Rack (Microwave) Mount

I wanted to place my microwave on a wire shelf rack. The feet did not align with the rack, so 3D printing to the rescue! I figured I would share the model since I'm sure it could be useful for other appliances. Microwave is a Panasonic,…

Pobrania
155
Polubienia
42
Ocena
0
P
Printablesc13m3n7

Microwave turning plate replacement

Replacement piece for the turning plate of the Combi C105 microwave oven. Print instructions Category: Kitchen & Dining Summary Replacement piece for the turning plate of the Combi C105 microwave oven. It might fit yours, the outer shaft…

Pobrania
155
Polubienia
16
Ocena
0
P
PrintablesFunky3D

Microwave turntable LG 5889W1A012A

Here is a replacement part for any microwave that has a standard Ø 180 mm 5889W1A012A turntable. It's commonly used in budget devices. All you'll need is a T10-T20 torx screwdriver for the assembly. Tip : print the sample test first to…

Pobrania
150
Polubienia
20
Ocena
5
P
PrintablesKelvin

Panasonic Microwave Door Release Lever 5Y00AP

A printable door release lever for Panasonic microwaves matching PN 5Y00AP / F82565Y00AP. Slightly modified with more internal vertical supports to make the part a bit stronger and print friendly. Print with the 45 degree surface aligned…

Pobrania
144
Polubienia
2
Ocena
5
P
PrintablesRoman

Miele microwave turntable

YAGNI (You ain't gonna need it) But if you are really the one person on the world who also needs a replacement for the turntable of a 30 year old Miele M8160-2 microwave oven , send send me some kudos, please. Took the model from Zendama…

Pobrania
135
Polubienia
21
Ocena
5
P
Printablesanjoschu

Crucible mold 100ml for metal melting in microwave (BE: mould)

Update: Added a cut-up version of the inner dome for easier removal (for 5mm wall thickness). Use this 3d-printed mold to make crucibles from silicon carbide powder and waterglass for metal melting in the microwave. It holds about 110ml.…

Pobrania
116
Polubienia
16
Ocena
0
P
PrintablesDavid Samuels

Microwave knob

Microwave knob I created for my microwave. Printed in BambuLab X1C from PLA, 0.2mm layer, no supports needed I added some tolerance for the shaft, add a comment if you want it modified Please upload a make if you print it, I'll appreciate…

Pobrania
114
Polubienia
3
Ocena
0
P
Printables3D PRINT

Lily with microwave

Lily with microwave miniature. Print with support. Other models: https://makerworld.com/@Misakov/collections/5259590-sprunki If you like the print, don't forget to like it.

Pobrania
112
Polubienia
6
Ocena
0
P
Printableschochi3D

Microwave Motor Model

Microwave Motor 1:1 - Accurate 3D Model for Projects and Reference This 3D model represents a microwave motor at a precise 1:1 scale, ideal for engineers, designers, and 3D printing enthusiasts who want to use it in their projects or…

Pobrania
112
Polubienia
4
Ocena
0
P
PrintablesTheRealTurtler

Mikrowellenregler / microwave control knob

This control knob was designed as a replacement for my mother's microwave. The original had a spring steel ring at the end, which i wanted to reuse to add some stability and strength, that's why the middle cylinder is narrower at the top.…

Pobrania
105
Polubienia
3
Ocena
5
P
Printablesakamaka

Microwave Cover / Anti-Splatter / Finger Grips.

Microwave Cover for Food / Anti-Splatter / Finger grips. Both are 65mm tall. The 210mm dia is the largest it can fit on MK3S. Material: Transparent Polypropylene (PP) or PETG

Pobrania
102
Polubienia
13
Ocena
4
P
PrintablesHarrison Rogers

Microwave Model

Supports: Yes Time: Depends on Scale Printer: I use an Ender 3 V2 Neo

Pobrania
97
Polubienia
0
Ocena
0
P
Printablesswitch263

GE Microwave Handle

The handle broke on our over-the-range GE microwave, so I slapped this together in Tinkercad to print a replacement. It has some issues, such as the mounting pegs are not evenly spaced on the handle ends, due to my assembly in tinkercad…

Pobrania
96
Polubienia
7
Ocena
0
P
Printablesledray

Whirlpool microwave handle replacement

The handle on my 20ish year old microwave was cracked and falling apart and I couldn't stomach paying $70 OEM. My partner started asking questions about buying a new microwave so I knew I had to jump into action. I was going to model the…

Pobrania
90
Polubienia
10
Ocena
5
P
PrintablesQuickset45

Microwave carousel wheel replacement

Tiny but useful! So, no lie, my microwave roller broke, and I got out the calipers and printed a replacement. I was worried that the PLA would melt in the microwave but it didn't. Not even after months. Fits my mircowave, rolls great.…

Pobrania
88
Polubienia
6
Ocena
0
P
Printables3Dietrich

Microwave Glass Plate Rotary Axe

it was one of those typical situations where I thought "if I had a 3D printer - I do!" The rotary axe of the microwave had become hot for some unknown reason, melted and the whole microwave was suddenly no longer usable. But it's a small…

Pobrania
86
Polubienia
16
Ocena
0
P
Printableskozmickid

Kenmore Microwave Replacement Handle p/n 3650W1A075H

This is a replacement handle for a Kenmore microwave. The part number is 3650W1A075H but it's been discontinued. I've included the .stl file for the handle and also a base to which the handle can be attached for sanding painting. The base…

Pobrania
83
Polubienia
1
Ocena
0
P
Printableskonusik_m

Bosch Microwave Door Latch

Bosch Microwave Door Latch

Pobrania
75
Polubienia
3
Ocena
5
P
PrintablesTokolozi

Microwave Oven Knob Ignis AKL 530

A colleague broke one of the knobs on his microwave, designed this one as a replacement in Onshape. Can be printed with AMS it you want to have a black arrow at the top, however should be easy to color using a sharpie. Designed for the…

Pobrania
73
Polubienia
7
Ocena
0
P
PrintablesAndy Spiridon

Samsung microwave turntable wheel/roller

Replacement wheel / roller for Samsung microwave oven. Because of the worn wheel, my turntable made strange noises.

Pobrania
69
Polubienia
5
Ocena
0
P
PrintableskingfronklinIIV

microwave

microwave

Pobrania
68
Polubienia
2
Ocena
5
P
PrintablesTOWUDS

Door opener key for microwave ovens SAMSUNG DE66-00226A

The dimension are correct, printing from petg plastic

Pobrania
67
Polubienia
0
Ocena
0
P
Printablesthewizard

Replacement buttons for AEG micromat microwave

One of the buttons of my microwave broke off and instead of buying one I used it as an exercise in reverse engineering. I decided to print it in 2 parts too avoid supports since there isn't much space to remove the supports and the…

Pobrania
67
Polubienia
5
Ocena
5
P
PrintablesGreg Nutt

Panasonic Microwave Door Button

Button designed to replace a broken door button for a Panasonic microwave. 2018-10-25 Update: Added some curves to strengthen the design. Category: Kitchen & Dining

Pobrania
64
Polubienia
2
Ocena
0
P
Printables3DOM

Microwave Door Latch

A friend's microwave door latch broke and asked for a replacement. Cooked this up in Fusion 360 only to realise there were similar models available online that could have worked. Nevertheless this was a fun project. Hope my version works…

Pobrania
62
Polubienia
2
Ocena
0
P
PrintablesDavemartin88

Small Microwave Flower Press

Small press to dry flowers in the microwave. The press is 65mm x 65 mm and printed from PLA. Bottom has a recess for a piece of corrugated cardboard as a cushion, flowers can be dried between 2 pieces of paper towel to absorb moisture.…

Pobrania
61
Polubienia
12
Ocena
0
P
PrintablesAzom

Microwave Plate Stand-Riser

I printed the model with PC (polycarbonate) - high temperature filament suitable for microwave. No printing support required. Settings are shown on a pick attached. Who colors are for aesthetic purpose and the second one is not…

Pobrania
61
Polubienia
15
Ocena
0
P
PrintablesOmar Kassar

Lever Microwave Door

This part is pressed to open the microwave door. the microwave door is locked and does not have a handle, To open the door you press this part and the microwave door opens. This part is for a Samsung microwave.

Pobrania
59
Polubienia
4
Ocena
0
P
Printablesamazing

Siemens Microwave Knob

Replacement of Siemens microwave oven knobs (originals (Pekalit) broke out at shaft). Small nose for scale printed as separte part to enable easy usage of different material a have an nice, sharp contrast. I used PETG (black) for the main…

Pobrania
58
Polubienia
3
Ocena
0
P
PrintablesJohan

Doorlatch for Thomson microwave oven

Door latch for microwave oven Thomson Microwave Oven COMBIMAT 25. But I would not be surprised if it fits other models and brands as well since they all look alike. These door latches break off easily. Mine did as well and after numerous…

Pobrania
58
Polubienia
1
Ocena
0
P
PrintablesMichele Bucovaz

Manopola microonde universale - Microwave knob

Manopola microonde - Microwave knob Manopola timer per microonde - attacco universale

Pobrania
58
Polubienia
6
Ocena
0
P
Printablesazuretower

Microwave Cover Hook

I made a few changes to the hook to hold onto the cover a bit stronger. I also made it wider so that it could be mounted with a command hook strip instead of a screw.

Pobrania
56
Polubienia
5
Ocena
0
P
PrintablesLorenzo Fassina

Feet risers for microwave Candy EGO-G25DCS

These are some simple feet risers to rise your Candy EGO-G25DCS microwave oven. Print instructions Material PLA Resolution 150 Supports No Brim No

Pobrania
55
Polubienia
2
Ocena
0
P
Printablesrakoenig

Microwave refresh bowl for silica gel

What is it good for? I use this bowl to refresh my silica gel in the microwave. Put some kitchen paper in the bowl to avoid melting the plastic when the silica gel gets hot. Put it in the microwave at lowest power for a minute. Get it out…

Pobrania
54
Polubienia
11
Ocena
0
P
PrintablesSparkyC

Plate rollers for Sharp microwave

Replacement plate rollers for Sharp microwave Old rollers had worn so badly that plate did not turn smoothly and made a lot of noise These rollers snap onto the existing frame Print instructions No special instructions. I used PETG.…

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesMacGyver

Kenmore microwave handle

I needed a replacement handle for our Kenmore microwave, model #40185049210 and did not want to pay over $60 for one including shipping. So, I took some measurements of the old one, and had one ready the next morning ready to put on! I…

Pobrania
53
Polubienia
3
Ocena
0
P
PrintablesKettu

Microwave plate rollers

Microwave plate rollers fore LG

Pobrania
53
Polubienia
6
Ocena
0
P
PrintablesGordyt47

HO Scale Spacers used to build Comunications Tower with Cell and microwave Antenna

HO Scale Spacers used to build Comunications Tower with Cell and microwave Antenna Using florest wire the spacers make a HO Scale tower. Cell and microwave antennas included My source of Model train things is WWW.RailGoose.com Print…

Pobrania
52
Polubienia
6
Ocena
0
P
PrintablesOmar Kassar

Microwave Door Part

This part is a replacement for a part in my microwave door. This part is fixed in the door and latches to the microwave which allows the door to open and close.

Pobrania
51
Polubienia
1
Ocena
0
P
Printablesmareczech

Microwave plate rotator connector

Spojovací váleček otočného talíře v mikrovlné troubě. Tento je pro značku Baumatic, ale bude fungovat i jinde. Na fotkách je kousek po několika měsících používání. Je to PLA, ale v podstatě to teplotně stačí. Když tak se po čase vytiskne…

Pobrania
51
Polubienia
8
Ocena
0
P
Printablescaffeinated

Microwave rice packet dispenser

A dispenser for storing microwave rice packets easily and being able to use them without having to unpack the storage area.

Pobrania
50
Polubienia
3
Ocena
0
P
PrintablesJohn McCardle

Replacement Microwave Handle - ME16K3000AS

WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…

Pobrania
49
Polubienia
3
Ocena
0
P
PrintablesNorbert Harrer

Knobs for a Whirlpool M501 Microwave Oven

Is printed in two parts which need to be super glued together. No brim or support needed. Printed in PLA.

Pobrania
49
Polubienia
3
Ocena
0
P
PrintablesMadPrints3D

Sharp Microwave Door Open Lever MLEVPB016MRF1

3D model of MLEVPB016MRF1. It will Requires supports, but I have designed it for printing as much as possible. Fits many Sharp carousel microwave models. Here is a list of what microwaves it fits: • R1210 • R1405 • R1406 • R1461A • R1462A…

Pobrania
49
Polubienia
2
Ocena
5
P
Printablespop_tart3650

Microwave

cool microwave model I made

Pobrania
49
Polubienia
6
Ocena
0
P

Basic Microwave Oven Handles

This is my answer to the high cost of appliance repair. These handles have holes set at 189mm. I have included the step files if you need to modify either of these models. Printing For style 1, you may want to print it on it's side with…

Pobrania
48
Polubienia
5
Ocena
0
P
Printables3D Rejsen

Ikea microwave plate drive replacement part

Ikea microwave plate drive replacement part

Pobrania
47
Polubienia
8
Ocena
0
P
PrintablesDodo

Microwave knob

The most fragile part of a microwave

Pobrania
47
Polubienia
1
Ocena
5
P
PrintablesIsidore

Reused microwave fan

Hello, This box was created to adapt an old microwave fan to a wall mount. The structure for mounting the fan was taken directly from the microwave. The model number of the fan used here is: SMF-745EA1 Category: 3D Printing

Pobrania
46
Polubienia
7
Ocena
0
P
PrintablesTheRealTurtler

Mikrowellenregler ohne Federring / microwave control knob without spring steel ring

This control knob was designed as a replacement for my mother's microwave. This version doesn't have the narrower part of the middle cylinder, which was meant for a spring steel ring. Print Settings Printer Brand: Creality Printer: Ender…

Pobrania
46
Polubienia
3
Ocena
0

Microwave Cover Mount

Quick and dirty mount for a plastic microwave plate cover Print instructions No specific considerations other than maybe using PETG, the cover can get pretty hot

Pobrania
45
Polubienia
6
Ocena
0
P
PrintablesJupera

Panasonic Microwave Door Lever (F82569Y00AP)

Fits microwave model NN-SN661S and possibly others. Panasonic part # F82569Y00AP Printed just fine without supports on my printer, but your mileage may vary (see orientation in photo). (Probably would have “looked” nicer in a different…

Pobrania
44
Polubienia
1
Ocena
0
P
PrintablesPascal Johann

Microwave Knop

It is just a simple replacement for my broken Microwave Knob

Pobrania
44
Polubienia
2
Ocena
0
P
PrintablesAJWDESIGN

Microwave riser

microwave riser for IMT service truck

Pobrania
43
Polubienia
3
Ocena
0
P
Printablestato_713

Cosmic Microwave Backround Radiation scaled one in 2*10^28

Originally published here: Cosmic Microwave Background Radiation scaled one in 2*10^28 by tato_713 - Thingiverse This model was made using the data of the Plank spacecraft of the Cosmic Microwave Background (CMB or CMBR), processed with…

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesAneliya Ivanova

Microwave Knob

This knob is a replacement part for the Whirlpool MD517 Microwave. It is single-part printed with tree support with the handle down. Printed with standard nozzle (0.4mm) and PLA. Really solid part with the perfect fit. No postprocessing…

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesMonkey Grrrl

GE microwave door handle bracket

Anyone who has ever had a GE microwave has probably had the handle brackets break. The OEM bracket is very brittle and gives out before too long. Print your own replacement. They print best with minimal supports placed stem down at an…

Pobrania
42
Polubienia
6
Ocena
5
P

Microwave Plate Cover Wall Hanger

A simple hook to hang your microwave plate cover.

Pobrania
42
Polubienia
3
Ocena
5
P

Coupling for microwave oven TEKA ML820BIS

Coupling for microwave oven TEKA ML820BIS. The coupling on my microwave oven broke (it split where the motor

Pobrania
42
Polubienia
3
Ocena
0
P
PrintablesJafer

nosný kruh mikrovlnné trouby, microwave oven support ring

tisk výplň 100% tryska 0,4 kolečko tryska 0,25 print fill 100% nozzle 0.4 wheel nozzle 0.25

Pobrania
41
Polubienia
10
Ocena
0
P
PrintablesLowPolyFigures

Low Poly Microwave Oven 3D Model

Low Poly Microwave Oven 3D Model

Pobrania
41
Polubienia
4
Ocena
0
P
PrintablesDominate4life

Microwave Cover Mount

Created this to place my microwave cover be placed under my cabinets. You want to print with support.

Pobrania
41
Polubienia
9
Ocena
5
P
PrintablesALX-24

Synchronous Motor Final Gear and HUB (for Microwaves, Fans, etc)

You should print this with as many walls and as much infill as you can tolerate, and tune your printer to print as much detail as it can achieve with the least posible distortion you can manage.

Pobrania
41
Polubienia
6
Ocena
0
P
PrintablesTimmETechnical

Frigidaire Microwave Light bulb icon

It is frustrating when you want to turn on the night light on the microwave, but cannot see the button. And all buttons are smooth, so you can't feel where it is. I created this light bulb icon to print and place on the lightbulb icon on…

Pobrania
41
Polubienia
0
Ocena
0
P
PrintablesDave G

GE SpacemakerXL Microwave Handle w/ Home text

This is a replacement handle for a GE Spacemaker XL under-cabinet microwave. The handle on mine broke and replacements are impossible to find so I designed my own. Print this with the front face down. No supports are required. I printed…

Pobrania
40
Polubienia
1
Ocena
0
P
PrintablesDznutz

Kenmore Microwave Foot

Oddly my Kenmore Microwave didnt come with feet so I made them. Settings Layer height: .2 Supports: yes Filament: PLA+

Pobrania
40
Polubienia
2
Ocena
0
P
PrintablesFoden

Panasonic Microwave Door Latch - remixed

mtmustski your Thing was a life save!!!!! Our door latch 'mysteriously' broke - all by itself it seems...... Wish i had seen the broken latch before I took the Microwave completely to bits and checked EVERYTHING else :o( Anyways, with a…

Pobrania
39
Polubienia
1
Ocena
0
P
PrintablesGraemeH

Under-Cabinet Microwave Steam Lid Holder

Not much to say really, use whichever print settings you'd normally use for everyday prints. Microwave steam lids are not heavy so I went with 10%. You could adapt this for other things so scale as needed. Fusion files included if you…

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesAaron

Microwave Handle for Frigidaire FGMV17WNVFA

I've included the STEP file in case you want to modify it for your microwave. I printed in PLA with relatively high infill (50% or so). I expect it won't last as long as the original, but it'll be a lot less than $150 when I need a new…

Pobrania
37
Polubienia
6
Ocena
0
P
Printablesvisle

Door latch for microwave oven

Accidentally snapped of a latch tab on my Miele microwave oven, replicated the part in Fusion 360 and printed in Prusament PETG. I believe it is part #6635824. Looks like it is used by a lot of different manufacturers and models also.…

Pobrania
37
Polubienia
3
Ocena
0
P
Printablesbach37strad

Maytag microwave handle replacement

Quick design to replace a busted plastic microwave handle. Uses a 1" hardware store dowel as the main handle. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: .2 Infill: 100 Filament: Hatchbox…

Pobrania
37
Polubienia
2
Ocena
0
P
PrintablesVibraza

Microwave oven coupler

Coupler for vitek microwave oven

Pobrania
36
Polubienia
6
Ocena
0
P
PrintablesFreddyBee

Sharp Microwave Door Latch

I wonder if anyone ever needs this but as I was proud to create my first own CAD model I though it's worth sharing. Due to exessive force (wifey smashed the door against the microwave's) the door mechanism of my Sharp microwave broke. I…

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesZdeněk

Microwave-style turntable – Horizontal filament spool roller/holder

A large turntable for filament spools. The print files here (STL) have the outer diameter of 176 mm so that they fit reliably on my PRUSA MINI+. However the SCAD source makes it fully configurable. All dimensions are set at the beginning…

Pobrania
34
Polubienia
5
Ocena
0
P
Printableshangbar3d

microwave latch strengthened version

Made it out of PETG for long lasting, 4 perimeters 20% infill, with little support.

Pobrania
34
Polubienia
6
Ocena
0
P
PrintablesJoel C

Microwave Splatter Cover Storage Solution

Allows you to store your microwave cover anywhere you desire. Designed for Nordic Ware splatter cover. May fit other manufacturers. Assemble with #6 screws (~3.5mm). I added felt stickers to increase the friction. Material: Any

Pobrania
33
Polubienia
10
Ocena
0
P
PrintablesNanaki

DE74-00027A Microwave turntable coupler (Samsung)

I bought a replacement plate for my GE 731K microwave and it turned out that the protrusions under the plate were higher than in the original. So I had to improvise. The plate that I bought is DE74-00027A and was supposed to be a direct…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesMakangry

Microwave foot bracket

-- EN version -- Microwave foot bracket to be screwed onto the furniture. Allows keeping the microwave in place during door opening/closing. Printing instructions: Use a heat-resistant material such as PETG and print with 100% infill to…

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesDan Rogers

Panasonic Microwave turntable drive cog replacement

The old microwave turn table stopped turning. Upon investigation, the ceramic drive cog that fits between the clockwork motor and the turn table had split on the motor shaft. A few minutes with my calipers and 3D builder, I sliced up and…

Pobrania
33
Polubienia
4
Ocena
0

HomeStyles Microwave Foot

It's just a press-in Foot clip for an old Quality-Beige HomeStyles Microwave from Hudson Bay. Model: EM820CKH-P00K Created the clip as a learning exercise for FreeCAD and uploading to printables Would be shocked if anyone else actually…

Pobrania
32
Polubienia
3
Ocena
5
P
PrintablesJavan

Microwave Handle

Model was printed with silver PETG on a Prusa MK3S with bed only supports at 0.20mm Quality.

Pobrania
32
Polubienia
2
Ocena
0
P
Printableslord_cocain

De Sina microwave door latch

Door latch for microwave De Sina WD1000DI 930C

Pobrania
32
Polubienia
1
Ocena
0
P
PrintablesVickash

Frigidaire Microwave Handle Plastic Parts (5304513455)

The main handle on this microwave is made of steel, but it mounts via 2 plastic pieces (painted to look like steel). The plastic parts are fairly easy to break, and the handle is only sold as a complete unit, as far as I could find. Print…

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesMaik

Severin microwave MW 7840 Door release opening mechanism lever

a part for the door release mechanism broke on a Severin microwave. Modeled a new one to replace it. Optimized the broken part with a support piece.

Pobrania
31
Polubienia
1
Ocena
0
P
Printablesnash chhatwal

Microwave oven fan mount

If you flip the model on its back it doesn't need support material.

Pobrania
31
Polubienia
5
Ocena
5

Microwave replacement part

piece that makes the microwave plate turn

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesIluzon

Microwave plate

A replacement plate for our microwave. It has a groove and detent on the bottom to fit the rotating part and wheels and is split into 2 parts that friction fit together. It includes my logo and the logo of our hackerspace. Let me know if…

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesJROBot

Microwave Handle Mount

I modeled a functionally equivalent replacement for a broken handle mount. I printed in Polymaker Galaxy Black ASA. 0.2mm layer height with variable layer height activated for top surface profile for the best possible contour. I reused…

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesKyleA.E

Emerson Microwave Handle

Replacement handle for an Emerson microwave. Designed to use the existing screws.

Pobrania
29
Polubienia
5
Ocena
0